@@ -2987,7 +2987,7 @@ static void intel_cx0pll_enable(struct intel_encoder *encoder,
struct intel_display *display = to_intel_display(encoder);
enum phy phy = intel_encoder_to_phy(encoder);
struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
- bool lane_reversal = dig_port->saved_port_bits & DDI_BUF_PORT_REVERSAL;
+ bool lane_reversal = dig_port->lane_reversal;
u8 maxpclk_lane = lane_reversal ? INTEL_CX0_LANE1 :
INTEL_CX0_LANE0;
intel_wakeref_t wakeref = intel_cx0_phy_transaction_begin(encoder);
@@ -335,10 +335,14 @@ static void intel_ddi_init_dp_buf_reg(struct intel_encoder *encoder,
struct intel_digital_port *dig_port = enc_to_dig_port(encoder);
/* DDI_BUF_CTL_ENABLE will be set by intel_ddi_prepare_link_retrain() later */
- intel_dp->DP = dig_port->saved_port_bits |
- DDI_PORT_WIDTH(crtc_state->lane_count) |
+ intel_dp->DP = DDI_PORT_WIDTH(crtc_state->lane_count) |
DDI_BUF_TRANS_SELECT(0);
+ if (dig_port->lane_reversal)
+ intel_dp->DP |= DDI_BUF_PORT_REVERSAL;
+ if (dig_port->ddi_a_4_lanes)
+ intel_dp->DP |= DDI_A_4_LANES;
+
if (DISPLAY_VER(i915) >= 14) {
if (intel_dp_is_uhbr(crtc_state))
intel_dp->DP |= DDI_BUF_PORT_DATA_40BIT;
@@ -2402,12 +2406,10 @@ static void intel_ddi_power_up_lanes(struct intel_encoder *encoder,
if (intel_encoder_is_combo(encoder)) {
enum phy phy = intel_encoder_to_phy(encoder);
- bool lane_reversal =
- dig_port->saved_port_bits & DDI_BUF_PORT_REVERSAL;
intel_combo_phy_power_up_lanes(i915, phy, false,
crtc_state->lane_count,
- lane_reversal);
+ dig_port->lane_reversal);
}
}
@@ -2547,7 +2549,7 @@ static void mtl_port_buf_ctl_program(struct intel_encoder *encoder,
else
val |= XELPDP_PORT_BUF_PORT_DATA_10BIT;
- if (dig_port->saved_port_bits & DDI_BUF_PORT_REVERSAL)
+ if (dig_port->lane_reversal)
val |= XELPDP_PORT_REVERSAL;
intel_de_write(i915, XELPDP_PORT_BUF_CTL1(i915, port), val);
@@ -3413,14 +3415,20 @@ static void intel_ddi_enable_hdmi(struct intel_atomic_state *state,
* is filled with lane count, already set in the crtc_state.
* The same is required to be filled in PORT_BUF_CTL for C10/20 Phy.
*/
- buf_ctl = dig_port->saved_port_bits | DDI_BUF_CTL_ENABLE;
+ buf_ctl = DDI_BUF_CTL_ENABLE;
+
+ if (dig_port->lane_reversal)
+ buf_ctl |= DDI_BUF_PORT_REVERSAL;
+ if (dig_port->ddi_a_4_lanes)
+ buf_ctl |= DDI_A_4_LANES;
+
if (DISPLAY_VER(dev_priv) >= 14) {
u8 lane_count = mtl_get_port_width(crtc_state->lane_count);
u32 port_buf = 0;
port_buf |= XELPDP_PORT_WIDTH(lane_count);
- if (dig_port->saved_port_bits & DDI_BUF_PORT_REVERSAL)
+ if (dig_port->lane_reversal)
port_buf |= XELPDP_PORT_REVERSAL;
intel_de_rmw(dev_priv, XELPDP_PORT_BUF_CTL1(dev_priv, port),
@@ -4763,7 +4771,7 @@ static bool intel_ddi_a_force_4_lanes(struct intel_digital_port *dig_port)
if (dig_port->base.port != PORT_A)
return false;
- if (dig_port->saved_port_bits & DDI_A_4_LANES)
+ if (dig_port->ddi_a_4_lanes)
return false;
/* Broxton/Geminilake: Bspec says that DDI_A_4_LANES is the only
@@ -4801,7 +4809,7 @@ intel_ddi_max_lanes(struct intel_digital_port *dig_port)
if (intel_ddi_a_force_4_lanes(dig_port)) {
drm_dbg_kms(&dev_priv->drm,
"Forcing DDI_A_4_LANES for port A\n");
- dig_port->saved_port_bits |= DDI_A_4_LANES;
+ dig_port->ddi_a_4_lanes = true;
max_lanes = 4;
}
@@ -4980,6 +4988,7 @@ void intel_ddi_init(struct intel_display *display,
bool init_hdmi, init_dp;
enum port port;
enum phy phy;
+ u32 ddi_buf_ctl;
port = intel_bios_encoder_port(devdata);
if (port == PORT_NONE)
@@ -5229,17 +5238,12 @@ void intel_ddi_init(struct intel_display *display,
else
encoder->hpd_pin = intel_hpd_pin_default(dev_priv, port);
- if (DISPLAY_VER(dev_priv) >= 11)
- dig_port->saved_port_bits =
- intel_de_read(dev_priv, DDI_BUF_CTL(port))
- & DDI_BUF_PORT_REVERSAL;
- else
- dig_port->saved_port_bits =
- intel_de_read(dev_priv, DDI_BUF_CTL(port))
- & (DDI_BUF_PORT_REVERSAL | DDI_A_4_LANES);
+ ddi_buf_ctl = intel_de_read(dev_priv, DDI_BUF_CTL(port));
+
+ dig_port->lane_reversal = intel_bios_encoder_lane_reversal(devdata) ||
+ ddi_buf_ctl & DDI_BUF_PORT_REVERSAL;
- if (intel_bios_encoder_lane_reversal(devdata))
- dig_port->saved_port_bits |= DDI_BUF_PORT_REVERSAL;
+ dig_port->ddi_a_4_lanes = DISPLAY_VER(dev_priv) < 11 && ddi_buf_ctl & DDI_A_4_LANES;
dig_port->dp.output_reg = INVALID_MMIO_REG;
dig_port->max_lanes = intel_ddi_max_lanes(dig_port);
@@ -1814,11 +1814,13 @@ struct intel_lspcon {
struct intel_digital_port {
struct intel_encoder base;
- u32 saved_port_bits;
struct intel_dp dp;
struct intel_hdmi hdmi;
struct intel_lspcon lspcon;
enum irqreturn (*hpd_pulse)(struct intel_digital_port *, bool);
+
+ bool lane_reversal;
+ bool ddi_a_4_lanes;
bool release_cl2_override;
u8 max_lanes;
/* Used for DP and ICL+ TypeC/DP and TypeC/HDMI ports. */
@@ -390,7 +390,7 @@ void intel_tc_port_set_fia_lane_count(struct intel_digital_port *dig_port,
{
struct drm_i915_private *i915 = to_i915(dig_port->base.base.dev);
struct intel_tc_port *tc = to_tc_port(dig_port);
- bool lane_reversal = dig_port->saved_port_bits & DDI_BUF_PORT_REVERSAL;
+ bool lane_reversal = dig_port->lane_reversal;
u32 val;
if (DISPLAY_VER(i915) >= 14)
dig_port->saved_port_bits is used to permanently store two DDI_BUF_CTL bits, DDI_BUF_PORT_REVERSAL and DDI_A_4_LANES. Store them separately as bools to make their use more logical and less about storing state as register bits. Signed-off-by: Jani Nikula <jani.nikula@intel.com> --- drivers/gpu/drm/i915/display/intel_cx0_phy.c | 2 +- drivers/gpu/drm/i915/display/intel_ddi.c | 44 ++++++++++--------- .../drm/i915/display/intel_display_types.h | 4 +- drivers/gpu/drm/i915/display/intel_tc.c | 2 +- 4 files changed, 29 insertions(+), 23 deletions(-)