diff mbox series

[v4] drm/i915/dsi: let HW maintain the HS-TRAIL timing

Message ID 20250311100626.533888-1-william.tseng@intel.com (mailing list archive)
State New
Headers show
Series [v4] drm/i915/dsi: let HW maintain the HS-TRAIL timing | expand

Commit Message

Tseng, William March 11, 2025, 10:06 a.m. UTC 
This change is to avoid over-specification of the TEOT timing
parameter, which is derived from software in current design.

Supposed that THS-TRAIL and THS-EXIT have the minimum values,
i.e., 60 and 100 in ns. If SW is overriding the HW default,
the TEOT value becomes 150 ns, approximately calculated by
the following formula.

  DIV_ROUND_UP(60/50)*50 + DIV_ROUND_UP(100/50))*50/2, where 50
  is LP Escape Clock time in ns.

The TEOT value 150 ns is larger than the maximum value,
around 136 ns if UI is 1.8ns, (105 ns + 12*UI, defined by MIPI
DPHY specification).

However, the TEOT value will meet the specification if THS-TRAIL
is set to the HW default, instead of software overriding.

The timing change is made for both data lane and clock lane.

v1: initial version.
v2: change clock lane dphy timings.
v3: remove calculation of trail cnt.
v4: rebase.

Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/13891
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Lee Shawn C <shawn.c.lee@intel.com>
Cc: Cooper Chiou <cooper.chiou@intel.com>
Signed-off-by: William Tseng <william.tseng@intel.com>
Acked-by: Vandita Kulkarni <vandita.kulkarni@intel.com>
---
 drivers/gpu/drm/i915/display/icl_dsi.c | 19 +++----------------
 1 file changed, 3 insertions(+), 16 deletions(-)
diff mbox series

Patch

diff --git a/drivers/gpu/drm/i915/display/icl_dsi.c b/drivers/gpu/drm/i915/display/icl_dsi.c
index 82bf6c654de2..6cf9c9275031 100644
--- a/drivers/gpu/drm/i915/display/icl_dsi.c
+++ b/drivers/gpu/drm/i915/display/icl_dsi.c
@@ -1846,14 +1846,13 @@  static void icl_dphy_param_init(struct intel_dsi *intel_dsi)
 	struct intel_connector *connector = intel_dsi->attached_connector;
 	struct mipi_config *mipi_config = connector->panel.vbt.dsi.config;
 	u32 tlpx_ns;
-	u32 prepare_cnt, exit_zero_cnt, clk_zero_cnt, trail_cnt;
-	u32 ths_prepare_ns, tclk_trail_ns;
+	u32 prepare_cnt, exit_zero_cnt, clk_zero_cnt;
+	u32 ths_prepare_ns;
 	u32 hs_zero_cnt;
 	u32 tclk_pre_cnt;
 
 	tlpx_ns = intel_dsi_tlpx_ns(intel_dsi);
 
-	tclk_trail_ns = max(mipi_config->tclk_trail, mipi_config->ths_trail);
 	ths_prepare_ns = max(mipi_config->ths_prepare,
 			     mipi_config->tclk_prepare);
 
@@ -1880,14 +1879,6 @@  static void icl_dphy_param_init(struct intel_dsi *intel_dsi)
 		clk_zero_cnt = ICL_CLK_ZERO_CNT_MAX;
 	}
 
-	/* trail cnt in escape clocks*/
-	trail_cnt = DIV_ROUND_UP(tclk_trail_ns, tlpx_ns);
-	if (trail_cnt > ICL_TRAIL_CNT_MAX) {
-		drm_dbg_kms(display->drm, "trail_cnt out of range (%d)\n",
-			    trail_cnt);
-		trail_cnt = ICL_TRAIL_CNT_MAX;
-	}
-
 	/* tclk pre count in escape clocks */
 	tclk_pre_cnt = DIV_ROUND_UP(mipi_config->tclk_pre, tlpx_ns);
 	if (tclk_pre_cnt > ICL_TCLK_PRE_CNT_MAX) {
@@ -1920,17 +1911,13 @@  static void icl_dphy_param_init(struct intel_dsi *intel_dsi)
 			       CLK_ZERO_OVERRIDE |
 			       CLK_ZERO(clk_zero_cnt) |
 			       CLK_PRE_OVERRIDE |
-			       CLK_PRE(tclk_pre_cnt) |
-			       CLK_TRAIL_OVERRIDE |
-			       CLK_TRAIL(trail_cnt));
+			       CLK_PRE(tclk_pre_cnt));
 
 	/* data lanes dphy timings */
 	intel_dsi->dphy_data_lane_reg = (HS_PREPARE_OVERRIDE |
 					 HS_PREPARE(prepare_cnt) |
 					 HS_ZERO_OVERRIDE |
 					 HS_ZERO(hs_zero_cnt) |
-					 HS_TRAIL_OVERRIDE |
-					 HS_TRAIL(trail_cnt) |
 					 HS_EXIT_OVERRIDE |
 					 HS_EXIT(exit_zero_cnt));