@@ -1011,7 +1011,7 @@ static u32 cnp_hz_to_pwm(struct intel_connector *connector, u32 pwm_freq_hz)
{
struct drm_i915_private *i915 = to_i915(connector->base.dev);
- return DIV_ROUND_CLOSEST(KHz(RUNTIME_INFO(i915)->rawclk_freq),
+ return DIV_ROUND_CLOSEST(KHz(DISPLAY_RUNTIME_INFO(i915)->rawclk_freq),
pwm_freq_hz);
}
@@ -1073,7 +1073,7 @@ static u32 pch_hz_to_pwm(struct intel_connector *connector, u32 pwm_freq_hz)
{
struct drm_i915_private *i915 = to_i915(connector->base.dev);
- return DIV_ROUND_CLOSEST(KHz(RUNTIME_INFO(i915)->rawclk_freq),
+ return DIV_ROUND_CLOSEST(KHz(DISPLAY_RUNTIME_INFO(i915)->rawclk_freq),
pwm_freq_hz * 128);
}
@@ -1091,7 +1091,7 @@ static u32 i9xx_hz_to_pwm(struct intel_connector *connector, u32 pwm_freq_hz)
int clock;
if (IS_PINEVIEW(i915))
- clock = KHz(RUNTIME_INFO(i915)->rawclk_freq);
+ clock = KHz(DISPLAY_RUNTIME_INFO(i915)->rawclk_freq);
else
clock = KHz(i915->display.cdclk.hw.cdclk);
@@ -1109,7 +1109,7 @@ static u32 i965_hz_to_pwm(struct intel_connector *connector, u32 pwm_freq_hz)
int clock;
if (IS_G4X(i915))
- clock = KHz(RUNTIME_INFO(i915)->rawclk_freq);
+ clock = KHz(DISPLAY_RUNTIME_INFO(i915)->rawclk_freq);
else
clock = KHz(i915->display.cdclk.hw.cdclk);
@@ -1133,7 +1133,7 @@ static u32 vlv_hz_to_pwm(struct intel_connector *connector, u32 pwm_freq_hz)
clock = MHz(25);
mul = 16;
} else {
- clock = KHz(RUNTIME_INFO(i915)->rawclk_freq);
+ clock = KHz(DISPLAY_RUNTIME_INFO(i915)->rawclk_freq);
mul = 128;
}
@@ -1474,6 +1474,9 @@ static void __intel_display_device_info_runtime_init(struct drm_i915_private *i9
}
}
+ display_runtime->rawclk_freq = intel_read_rawclk(i915);
+ drm_dbg_kms(&i915->drm, "rawclk rate: %d kHz\n", display_runtime->rawclk_freq);
+
return;
display_fused_off:
@@ -1516,6 +1519,8 @@ void intel_display_device_info_print(const struct intel_display_device_info *inf
drm_printf(p, "has_hdcp: %s\n", str_yes_no(runtime->has_hdcp));
drm_printf(p, "has_dmc: %s\n", str_yes_no(runtime->has_dmc));
drm_printf(p, "has_dsc: %s\n", str_yes_no(runtime->has_dsc));
+
+ drm_printf(p, "rawclk rate: %u kHz\n", runtime->rawclk_freq);
}
/*
@@ -204,6 +204,8 @@ struct intel_display_runtime_info {
u16 step;
} ip;
+ u32 rawclk_freq;
+
u8 pipe_mask;
u8 cpu_transcoder_mask;
u16 port_mask;
@@ -1176,9 +1176,9 @@ static void vlv_init_display_clock_gating(struct drm_i915_private *dev_priv)
MI_ARB_DISPLAY_TRICKLE_FEED_DISABLE);
intel_de_write(dev_priv, CBR1_VLV, 0);
- drm_WARN_ON(&dev_priv->drm, RUNTIME_INFO(dev_priv)->rawclk_freq == 0);
+ drm_WARN_ON(&dev_priv->drm, DISPLAY_RUNTIME_INFO(dev_priv)->rawclk_freq == 0);
intel_de_write(dev_priv, RAWCLK_FREQ_VLV,
- DIV_ROUND_CLOSEST(RUNTIME_INFO(dev_priv)->rawclk_freq,
+ DIV_ROUND_CLOSEST(DISPLAY_RUNTIME_INFO(dev_priv)->rawclk_freq,
1000));
}
@@ -83,7 +83,7 @@ static u32 g4x_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
* The clock divider is based off the hrawclk, and would like to run at
* 2MHz. So, take the hrawclk value and divide by 2000 and use that
*/
- return DIV_ROUND_CLOSEST(RUNTIME_INFO(i915)->rawclk_freq, 2000);
+ return DIV_ROUND_CLOSEST(DISPLAY_RUNTIME_INFO(i915)->rawclk_freq, 2000);
}
static u32 ilk_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
@@ -103,7 +103,7 @@ static u32 ilk_get_aux_clock_divider(struct intel_dp *intel_dp, int index)
if (dig_port->aux_ch == AUX_CH_A)
freq = i915->display.cdclk.hw.cdclk;
else
- freq = RUNTIME_INFO(i915)->rawclk_freq;
+ freq = DISPLAY_RUNTIME_INFO(i915)->rawclk_freq;
return DIV_ROUND_CLOSEST(freq, 2000);
}
@@ -1483,7 +1483,7 @@ static void pps_init_registers(struct intel_dp *intel_dp, bool force_disable_vdd
{
struct drm_i915_private *dev_priv = dp_to_i915(intel_dp);
u32 pp_on, pp_off, port_sel = 0;
- int div = RUNTIME_INFO(dev_priv)->rawclk_freq / 1000;
+ int div = DISPLAY_RUNTIME_INFO(dev_priv)->rawclk_freq / 1000;
struct pps_registers regs;
enum port port = dp_to_dig_port(intel_dp)->base.port;
const struct edp_power_seq *seq = &intel_dp->pps.pps_delays;
@@ -124,7 +124,6 @@ void intel_device_info_print(const struct intel_device_info *info,
#undef PRINT_FLAG
drm_printf(p, "has_pooled_eu: %s\n", str_yes_no(runtime->has_pooled_eu));
- drm_printf(p, "rawclk rate: %u kHz\n", runtime->rawclk_freq);
}
#define ID(id) (id)
@@ -370,10 +369,6 @@ void intel_device_info_runtime_init(struct drm_i915_private *dev_priv)
"Disabling ppGTT for VT-d support\n");
runtime->ppgtt_type = INTEL_PPGTT_NONE;
}
-
- runtime->rawclk_freq = intel_read_rawclk(dev_priv);
- drm_dbg(&dev_priv->drm, "rawclk rate: %d kHz\n", runtime->rawclk_freq);
-
}
/*
@@ -204,8 +204,6 @@ struct intel_runtime_info {
u16 device_id;
- u32 rawclk_freq;
-
struct intel_step_info step;
unsigned int page_sizes; /* page sizes supported by the HW */
It's mostly about display, so move it under display. This should also fix rawclk freq initialization in the xe driver. v2: Change the init location Link: https://lore.kernel.org/r/20240819133138.147511-2-maarten.lankhorst@linux.intel.com Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> Cc: Ville Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: Jani Nikula <jani.nikula@intel.com> --- drivers/gpu/drm/i915/display/intel_backlight.c | 10 +++++----- drivers/gpu/drm/i915/display/intel_display_device.c | 5 +++++ drivers/gpu/drm/i915/display/intel_display_device.h | 2 ++ .../gpu/drm/i915/display/intel_display_power_well.c | 4 ++-- drivers/gpu/drm/i915/display/intel_dp_aux.c | 4 ++-- drivers/gpu/drm/i915/display/intel_pps.c | 2 +- drivers/gpu/drm/i915/intel_device_info.c | 5 ----- drivers/gpu/drm/i915/intel_device_info.h | 2 -- 8 files changed, 17 insertions(+), 17 deletions(-)