diff mbox series

[v24,04/24] x86/mm: x86/sgx: Signal SIGSEGV with PF_SGX

Message ID 20191129231326.18076-5-jarkko.sakkinen@linux.intel.com (mailing list archive)
State New, archived
Headers show
Series Intel SGX foundations | expand

Commit Message

Jarkko Sakkinen Nov. 29, 2019, 11:13 p.m. UTC
From: Sean Christopherson <sean.j.christopherson@intel.com>

Include SGX bit to the PF error codes and throw SIGSEGV with PF_SGX when
a #PF with SGX set happens.

CPU throws a #PF with the SGX bit in the event of Enclave Page Cache Map
(EPCM) conflict. The EPCM is a CPU-internal table, which describes the
properties for a enclave page. Enclaves are measured and signed software
entities, which SGX hosts. [1]

Although the primary purpose of the EPCM conflict checks  is to prevent
malicious accesses to an enclave, an illegit access can happen also for
legit reasons.

All SGX reserved memory, including EPCM is encrypted with a transient
key that does not survive from the power transition. Throwing a SIGSEGV
allows user space software react when this happens (e.g. rec-create the
enclave, which was invalidated).

[1] Intel SDM: 36.5.1 Enclave Page Cache Map (EPCM)

Signed-off-by: Sean Christopherson <sean.j.christopherson@intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
---
 arch/x86/include/asm/traps.h |  1 +
 arch/x86/mm/fault.c          | 13 +++++++++++++
 2 files changed, 14 insertions(+)
diff mbox series

Patch

diff --git a/arch/x86/include/asm/traps.h b/arch/x86/include/asm/traps.h
index b25e633033c3..81472cae4024 100644
--- a/arch/x86/include/asm/traps.h
+++ b/arch/x86/include/asm/traps.h
@@ -171,5 +171,6 @@  enum x86_pf_error_code {
 	X86_PF_RSVD	=		1 << 3,
 	X86_PF_INSTR	=		1 << 4,
 	X86_PF_PK	=		1 << 5,
+	X86_PF_SGX	=		1 << 15,
 };
 #endif /* _ASM_X86_TRAPS_H */
diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c
index 9ceacd1156db..b1f0060b263f 100644
--- a/arch/x86/mm/fault.c
+++ b/arch/x86/mm/fault.c
@@ -1178,6 +1178,19 @@  access_error(unsigned long error_code, struct vm_area_struct *vma)
 	if (error_code & X86_PF_PK)
 		return 1;
 
+	/*
+	 * Access is blocked by the Enclave Page Cache Map (EPCM), i.e. the
+	 * access is allowed by the PTE but not the EPCM. This usually happens
+	 * when the EPCM is yanked out from under us, e.g. by hardware after a
+	 * suspend/resume cycle. In any case, software, i.e. the kernel, can't
+	 * fix the source of the fault as the EPCM can't be directly modified by
+	 * software. Handle the fault as an access error in order to signal
+	 * userspace so that userspace can rebuild their enclave(s), even though
+	 * userspace may not have actually violated access permissions.
+	 */
+	if (unlikely(error_code & X86_PF_SGX))
+		return 1;
+
 	/*
 	 * Make sure to check the VMA so that we do not perform
 	 * faults just to hit a X86_PF_PK as soon as we fill in a