diff mbox series

[5/5] selftests/sgx: Add SGX selftest augment_via_eaccept_long

Message ID 20220904075358.7727-6-jarkko@kernel.org (mailing list archive)
State New, archived
Headers show
Series selftests/sgx: Test a large dynamic heap | expand

Commit Message

Jarkko Sakkinen Sept. 4, 2022, 7:53 a.m. UTC 
From: Vijay Dhanraj <vijay.dhanraj@intel.com>

Add a new test case which is same as augment_via_eaccept but adds a
larger number of EPC pages to stress test EAUG via EACCEPT.

Signed-off-by: Vijay Dhanraj <vijay.dhanraj@intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
---
v7:
- Contains now only the test case. Support for dynamic heap is
  prepared in prepending patches.

v6:
- Address Reinette's feedback:
  https://lore.kernel.org/linux-sgx/Yw6%2FiTzSdSw%2FY%2FVO@kernel.org/

v5:
- Add the klog dump and sysctl option to the commit message.

v4:
- Explain expectations for dirty_page_list in the function header, instead
  of an inline comment.
- Improve commit message to explain the conditions better.
- Return the number of pages left dirty to ksgxd() and print warning after
  the 2nd call, if there are any.

v3:
- Remove WARN_ON().
- Tuned comments and the commit message a bit.

v2:
- Replaced WARN_ON() with optional pr_info() inside
  __sgx_sanitize_pages().
- Rewrote the commit message.
- Added the fixes tag.
---
 tools/testing/selftests/sgx/main.c | 112 ++++++++++++++++++++++++++++-
 1 file changed, 111 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/tools/testing/selftests/sgx/main.c b/tools/testing/selftests/sgx/main.c
index 4feffe7cd8fb..48976bb7bd79 100644
--- a/tools/testing/selftests/sgx/main.c
+++ b/tools/testing/selftests/sgx/main.c
@@ -23,8 +23,15 @@ 
 
 static const size_t ENCL_HEAP_SIZE_DEFAULT = PAGE_SIZE;
 static const size_t ENCL_DYNAMIC_SIZE_DEFAULT = PAGE_SIZE;
+/*
+ * The size was chosen based on a bug report:
+ * Message-ID: <DM8PR11MB55912A7F47A84EC9913A6352F6999@DM8PR11MB5591.namprd11.prod.outlook.com>
+ */
+static const size_t ENCL_DYNAMIC_SIZE_LONG = 8L * 1024L * 1024L * 1024L;
+static const unsigned long TIMEOUT_DEFAULT = 900;
 static const uint64_t MAGIC = 0x1122334455667788ULL;
 static const uint64_t MAGIC2 = 0x8877665544332211ULL;
+
 vdso_sgx_enter_enclave_t vdso_sgx_enter_enclave;
 
 /*
@@ -388,7 +395,7 @@  TEST_F(enclave, unclobbered_vdso_oversubscribed)
 	EXPECT_EQ(self->run.user_data, 0);
 }
 
-TEST_F_TIMEOUT(enclave, unclobbered_vdso_oversubscribed_remove, 900)
+TEST_F_TIMEOUT(enclave, unclobbered_vdso_oversubscribed_remove, TIMEOUT_DEFAULT)
 {
 	struct sgx_enclave_remove_pages remove_ioc;
 	struct sgx_enclave_modify_types modt_ioc;
@@ -1248,6 +1255,109 @@  TEST_F(enclave, augment_via_eaccept)
 	munmap(addr, PAGE_SIZE);
 }
 
+/*
+ * Test for the addition of large number of pages to an initialized enclave via
+ * a pre-emptive run of EACCEPT on every page to be added.
+ */
+TEST_F_TIMEOUT(enclave, augment_via_eaccept_long, TIMEOUT_DEFAULT)
+{
+	struct encl_op_get_from_addr get_addr_op;
+	struct encl_op_put_to_addr put_addr_op;
+	struct encl_op_eaccept eaccept_op;
+	size_t total_size = 0;
+	unsigned long i;
+	void *addr;
+
+	if (!sgx2_supported())
+		SKIP(return, "SGX2 not supported");
+
+	ASSERT_TRUE(setup_test_encl_dynamic(ENCL_HEAP_SIZE_DEFAULT,
+					    ENCL_DYNAMIC_SIZE_LONG,
+					    &self->encl, _metadata));
+
+	memset(&self->run, 0, sizeof(self->run));
+	self->run.tcs = self->encl.encl_base;
+
+	for (i = 0; i < self->encl.nr_segments; i++) {
+		struct encl_segment *seg = &self->encl.segment_tbl[i];
+
+		total_size += seg->size;
+	}
+
+	/*
+	 * mmap() every page at end of existing enclave to be used for
+	 * EDMM.
+	 */
+	addr = mmap((void *)self->encl.encl_base + total_size, ENCL_DYNAMIC_SIZE_LONG,
+		    PROT_READ | PROT_WRITE | PROT_EXEC, MAP_SHARED | MAP_FIXED,
+		    self->encl.fd, 0);
+	EXPECT_NE(addr, MAP_FAILED);
+
+	self->run.exception_vector = 0;
+	self->run.exception_error_code = 0;
+	self->run.exception_addr = 0;
+
+	/*
+	 * Run EACCEPT on every page to trigger the #PF->EAUG->EACCEPT(again
+	 * without a #PF). All should be transparent to userspace.
+	 */
+	eaccept_op.flags = SGX_SECINFO_R | SGX_SECINFO_W | SGX_SECINFO_REG | SGX_SECINFO_PENDING;
+	eaccept_op.ret = 0;
+	eaccept_op.header.type = ENCL_OP_EACCEPT;
+
+	for (i = 0; i < ENCL_DYNAMIC_SIZE_LONG; i += 4096) {
+		eaccept_op.epc_addr = (uint64_t)(addr + i);
+
+		EXPECT_EQ(ENCL_CALL(&eaccept_op, &self->run, true), 0);
+		if (self->run.exception_vector == 14 &&
+		    self->run.exception_error_code == 4 &&
+		    self->run.exception_addr == self->encl.encl_base) {
+			munmap(addr, ENCL_DYNAMIC_SIZE_LONG);
+			SKIP(return, "Kernel does not support adding pages to initialized enclave");
+		}
+
+		EXPECT_EQ(self->run.exception_vector, 0);
+		EXPECT_EQ(self->run.exception_error_code, 0);
+		EXPECT_EQ(self->run.exception_addr, 0);
+		ASSERT_EQ(eaccept_op.ret, 0);
+		ASSERT_EQ(self->run.function, EEXIT);
+	}
+
+	/*
+	 * Pool of pages were successfully added to enclave. Perform sanity
+	 * check on first page of the pool only to ensure data can be written
+	 * to and read from a dynamically added enclave page.
+	 */
+	put_addr_op.value = MAGIC;
+	put_addr_op.addr = (unsigned long)addr;
+	put_addr_op.header.type = ENCL_OP_PUT_TO_ADDRESS;
+
+	EXPECT_EQ(ENCL_CALL(&put_addr_op, &self->run, true), 0);
+
+	EXPECT_EEXIT(&self->run);
+	EXPECT_EQ(self->run.exception_vector, 0);
+	EXPECT_EQ(self->run.exception_error_code, 0);
+	EXPECT_EQ(self->run.exception_addr, 0);
+
+	/*
+	 * Read memory from newly added page that was just written to,
+	 * confirming that data previously written (MAGIC) is present.
+	 */
+	get_addr_op.value = 0;
+	get_addr_op.addr = (unsigned long)addr;
+	get_addr_op.header.type = ENCL_OP_GET_FROM_ADDRESS;
+
+	EXPECT_EQ(ENCL_CALL(&get_addr_op, &self->run, true), 0);
+
+	EXPECT_EQ(get_addr_op.value, MAGIC);
+	EXPECT_EEXIT(&self->run);
+	EXPECT_EQ(self->run.exception_vector, 0);
+	EXPECT_EQ(self->run.exception_error_code, 0);
+	EXPECT_EQ(self->run.exception_addr, 0);
+
+	munmap(addr, ENCL_DYNAMIC_SIZE_LONG);
+}
+
 /*
  * SGX2 page type modification test in two phases:
  * Phase 1: