[v2,3/4] auto-t: add DPP tests to check extra settings are applied

Commit Message

James Prestwood Dec. 18, 2023, 2:12 p.m. UTC

In order to test that extra settings are applied prior to connecting
two tests were added for hidden networks as well as one testing if
there is already an existing profile after DPP.

The reason hidden networks were used was due to the requirement of
the "Hidden" settings in the profile. If this setting doesn't get
sync'ed to disk the connection will fail.
---
 autotests/testDPP/hw.conf         |  5 ++-
 autotests/testDPP/pkex_test.py    | 72 ++++++++++++++++++++++++++++++-
 autotests/testDPP/ssidHidden.conf |  9 ++++
 autotests/testDPP/ssidHidden.psk  |  5 +++
 4 files changed, 87 insertions(+), 4 deletions(-)
 create mode 100644 autotests/testDPP/ssidHidden.conf
 create mode 100644 autotests/testDPP/ssidHidden.psk

Patch

diff --git a/autotests/testDPP/hw.conf b/autotests/testDPP/hw.conf
index a2b1470e..85f33777 100644
--- a/autotests/testDPP/hw.conf
+++ b/autotests/testDPP/hw.conf
@@ -1,5 +1,5 @@ 
 [SETUP]
-num_radios=4
+num_radios=5
 start_iwd=0
 hwsim_medium=yes
 
@@ -8,6 +8,7 @@  rad0=wpas.conf
 
 [HOSTAPD]
 rad1=hostapd.conf
+rad2=ssidHidden.conf
 
 [NameSpaces]
-ns0=rad2
+ns0=rad3
diff --git a/autotests/testDPP/pkex_test.py b/autotests/testDPP/pkex_test.py
index 9e0b5dd8..5df6c47d 100644
--- a/autotests/testDPP/pkex_test.py
+++ b/autotests/testDPP/pkex_test.py
@@ -26,11 +26,11 @@  class Test(unittest.TestCase):
         self.wpas.dpp_stop_listen()
         self.wpas.dpp_configurator_remove()
 
-    def start_iwd_pkex_configurator(self, device, agent=False):
+    def start_iwd_pkex_configurator(self, device, agent=False, profile='ssidCCMP.psk'):
         self.hapd.reload()
         self.hapd.wait_for_event('AP-ENABLED')
 
-        IWD.copy_to_storage('ssidCCMP.psk')
+        IWD.copy_to_storage(profile)
         device.autoconnect = True
 
         condition = 'obj.state == DeviceState.connected'
@@ -186,6 +186,71 @@  class Test(unittest.TestCase):
 
         self.agent = None
 
+    def test_existing_network(self):
+        self.hapd.reload()
+        self.hapd.wait_for_event('AP-ENABLED')
+        IWD.copy_to_storage("existingProfile.psk", "/tmp/ns0/", "ssidCCMP.psk")
+
+        # Scan first so a network object exists, and its a known network
+        self.device[1].scan()
+        self.wd.wait_for_object_condition(self.device[1], 'obj.scanning == True')
+        self.wd.wait_for_object_condition(self.device[1], 'obj.scanning == False')
+
+        self.start_iwd_pkex_configurator(self.device[0])
+
+        self.device[1].dpp_pkex_enroll('secret123', identifier="test")
+        self.device[1].autoconnect = True
+
+        condition = 'obj.state == DeviceState.connected'
+        self.wd.wait_for_object_condition(self.device[1], condition)
+
+        # Check additional settings were carried over
+        with open('/tmp/ns0/ssidCCMP.psk', 'r') as f:
+            settings = f.read()
+
+        self.assertIn("SendHostname=true", settings)
+
+    def test_existing_hidden_network(self):
+        self.hapd_hidden.reload()
+        self.hapd_hidden.wait_for_event('AP-ENABLED')
+        IWD.copy_to_storage("existingProfile.psk", "/tmp/ns0/", "ssidHidden.psk")
+
+        # Scan first so a network object exists, and its a known network
+        self.device[1].scan()
+        self.wd.wait_for_object_condition(self.device[1], 'obj.scanning == True')
+        self.wd.wait_for_object_condition(self.device[1], 'obj.scanning == False')
+
+        self.start_iwd_pkex_configurator(self.device[0], profile='ssidHidden.psk')
+
+        self.device[1].dpp_pkex_enroll('secret123', identifier="test")
+        self.device[1].autoconnect = True
+
+        condition = 'obj.state == DeviceState.connected'
+        self.wd.wait_for_object_condition(self.device[1], condition)
+
+        # Check additional settings were carried over
+        with open('/tmp/ns0/ssidHidden.psk', 'r') as f:
+            settings = f.read()
+
+        self.assertIn("Hidden=true", settings)
+
+    def test_hidden_network(self):
+        self.hapd_hidden.reload()
+        self.hapd_hidden.wait_for_event('AP-ENABLED')
+        self.start_iwd_pkex_configurator(self.device[0], profile='ssidHidden.psk')
+
+        self.device[1].dpp_pkex_enroll('secret123', identifier="test")
+        self.device[1].autoconnect = True
+
+        condition = 'obj.state == DeviceState.connected'
+        self.wd.wait_for_object_condition(self.device[1], condition)
+
+        # Check additional settings were carried over
+        with open('/tmp/ns0/ssidHidden.psk', 'r') as f:
+            settings = f.read()
+
+        self.assertIn("Hidden=true", settings)
+
     def setUp(self):
         ns0 = ctx.get_namespace('ns0')
         self.wpas = Wpas('wpas.conf')
@@ -197,6 +262,8 @@  class Test(unittest.TestCase):
         self.device.append(self.wd_ns0.list_devices(1)[0])
         self.hapd = HostapdCLI('hostapd.conf')
         self.hapd.disable()
+        self.hapd_hidden = HostapdCLI('ssidHidden.conf')
+        self.hapd_hidden.disable()
         self.hwsim = Hwsim()
 
         self.rule_xchg_resp = self.hwsim.rules.create()
@@ -240,6 +307,7 @@  class Test(unittest.TestCase):
         self.hapd = None
         self.rule_xchg_resp = None
         IWD.clear_storage()
+        IWD.clear_storage('/tmp/ns0')
 
     @classmethod
     def setUpClass(cls):
diff --git a/autotests/testDPP/ssidHidden.conf b/autotests/testDPP/ssidHidden.conf
new file mode 100644
index 00000000..1055fb9c
--- /dev/null
+++ b/autotests/testDPP/ssidHidden.conf
@@ -0,0 +1,9 @@ 
+hw_mode=g
+channel=6
+ssid=ssidHidden
+
+wpa=1
+wpa_pairwise=TKIP
+wpa_passphrase=secret123
+
+ignore_broadcast_ssid=1
diff --git a/autotests/testDPP/ssidHidden.psk b/autotests/testDPP/ssidHidden.psk
new file mode 100644
index 00000000..9917294e
--- /dev/null
+++ b/autotests/testDPP/ssidHidden.psk
@@ -0,0 +1,5 @@ 
+[Security]
+Passphrase=secret123
+
+[Settings]
+Hidden=true