mbox series

[RFC,v6,0/7] Enable ptp_kvm for arm64

Message ID 20191024110209.21328-1-jianyong.wu@arm.com (mailing list archive)
Headers show
Series Enable ptp_kvm for arm64 | expand

Message

Jianyong Wu Oct. 24, 2019, 11:02 a.m. UTC 
kvm ptp targets to provide high precision time sync between guest
and host in virtualization environment. This patch enable kvm ptp
for arm64.
This patch set base on [1][2][3]

change log:
from v5 to v6:
        (1) apply Mark's patch[4] to get SMCCC conduit.
        (2) add mechanism to recognize current clocksource by add
clocksouce_id value into struct clocksource instead of method in patch-v5.
        (3) rename kvm_arch_ptp_get_clock_fn into
kvm_arch_ptp_get_crosststamp.

from v4 to v5:
        (1) remove hvc delay compensasion as it should leave to userspace.
        (2) check current clocksource in hvc call service.
        (3) expose current clocksource by adding it to
system_time_snapshot.
        (4) add helper to check if clocksource is arm_arch_counter.
        (5) rename kvm_ptp.c to ptp_kvm_common.c

from v3 to v4:
        (1) fix clocksource of ptp_kvm to arch_sys_counter.
        (2) move kvm_arch_ptp_get_clock_fn into arm_arch_timer.c
        (3) subtract cntvoff before return cycles from host.
        (4) use ktime_get_snapshot instead of getnstimeofday and
get_current_counterval to return time and counter value.
        (5) split ktime and counter into two 32-bit block respectively
to avoid Y2038-safe issue.
        (6) set time compensation to device time as half of the delay of
hvc call.
        (7) add ARM_ARCH_TIMER as dependency of ptp_kvm for
arm64.

from v2 to v3:
        (1) fix some issues in commit log.
        (2) add some receivers in send list.

from v1 to v2:
        (1) move arch-specific code from arch/ to driver/ptp/
        (2) offer mechanism to inform userspace if ptp_kvm service is
available.
        (3) separate ptp_kvm code for arm64 into hypervisor part and
guest part.
        (4) add API to expose monotonic clock and counter value.
        (5) refine code: remove no necessary part and reconsitution.

[1]https://git.kernel.org/pub/scm/linux/kernel/git/will/linux.git/
commit/?h=kvm/hvc&id=125ea89e4a21e2fc5235410f966a996a1a7148bf
[2]https://git.kernel.org/pub/scm/linux/kernel/git/will/linux.git/
commit/?h=kvm/hvc&id=464f5a1741e5959c3e4d2be1966ae0093b4dce06
[3]https://git.kernel.org/pub/scm/linux/kernel/git/will/linux.git/
commit/?h=kvm/hvc&id=6597490e005d0eeca8ed8c1c1d7b4318ee014681
[4]https://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux.git/
commit/?h=for-next/smccc-conduit-cleanup&id=6b7fe77c334ae59fed9500140e08f4f896b36871

Jianyong Wu (6):
  psci: let arm_smccc_1_1_invoke available by modules
  ptp: Reorganize ptp_kvm modules to make it arch-independent.
  time: Add mechanism to recognize clocksource in time_get_snapshot
  psci: Add hvc call service for ptp_kvm.
  ptp: arm64: Enable ptp_kvm for arm64
  kvm: arm64: Add capability check extension for ptp_kvm

Mark Rutland (1):
  arm/arm64: smccc/psci: add arm_smccc_1_1_get_conduit()

 drivers/clocksource/arm_arch_timer.c        | 24 ++++++
 drivers/firmware/psci/psci.c                | 16 ++++
 drivers/ptp/Kconfig                         |  2 +-
 drivers/ptp/Makefile                        |  1 +
 drivers/ptp/ptp_kvm_arm64.c                 | 53 +++++++++++++
 drivers/ptp/{ptp_kvm.c => ptp_kvm_common.c} | 77 +++++-------------
 drivers/ptp/ptp_kvm_x86.c                   | 87 +++++++++++++++++++++
 include/asm-generic/ptp_kvm.h               | 12 +++
 include/clocksource/arm_arch_timer.h        |  4 +
 include/linux/arm-smccc.h                   | 30 ++++++-
 include/linux/clocksource.h                 |  6 ++
 include/linux/timekeeping.h                 | 12 +--
 include/uapi/linux/kvm.h                    |  1 +
 kernel/time/clocksource.c                   |  3 +
 kernel/time/timekeeping.c                   |  1 +
 virt/kvm/arm/arm.c                          |  1 +
 virt/kvm/arm/psci.c                         | 22 ++++++
 17 files changed, 286 insertions(+), 66 deletions(-)
 create mode 100644 drivers/ptp/ptp_kvm_arm64.c
 rename drivers/ptp/{ptp_kvm.c => ptp_kvm_common.c} (63%)
 create mode 100644 drivers/ptp/ptp_kvm_x86.c
 create mode 100644 include/asm-generic/ptp_kvm.h

Comments

Jianyong Wu Nov. 7, 2019, 5:34 a.m. UTC | #1 
Hi all,

Any comments?

Thanks
Jianyong

> -----Original Message-----
> From: Jianyong Wu <jianyong.wu@arm.com>
> Sent: Thursday, October 24, 2019 7:02 PM
> To: netdev@vger.kernel.org; yangbo.lu@nxp.com; john.stultz@linaro.org;
> tglx@linutronix.de; pbonzini@redhat.com; sean.j.christopherson@intel.com;
> maz@kernel.org; richardcochran@gmail.com; Mark Rutland
> <Mark.Rutland@arm.com>; will@kernel.org; Suzuki Poulose
> <Suzuki.Poulose@arm.com>
> Cc: linux-kernel@vger.kernel.org; linux-arm-kernel@lists.infradead.org;
> kvmarm@lists.cs.columbia.edu; kvm@vger.kernel.org; Steve Capper
> <Steve.Capper@arm.com>; Kaly Xin (Arm Technology China)
> <Kaly.Xin@arm.com>; Justin He (Arm Technology China)
> <Justin.He@arm.com>; Jianyong Wu (Arm Technology China)
> <Jianyong.Wu@arm.com>; nd <nd@arm.com>
> Subject: [RFC PATCH v6 0/7] Enable ptp_kvm for arm64
> 
> kvm ptp targets to provide high precision time sync between guest and host
> in virtualization environment. This patch enable kvm ptp for arm64.
> This patch set base on [1][2][3]
> 
> change log:
> from v5 to v6:
>         (1) apply Mark's patch[4] to get SMCCC conduit.
>         (2) add mechanism to recognize current clocksource by add
> clocksouce_id value into struct clocksource instead of method in patch-v5.
>         (3) rename kvm_arch_ptp_get_clock_fn into
> kvm_arch_ptp_get_crosststamp.
> 
> from v4 to v5:
>         (1) remove hvc delay compensasion as it should leave to userspace.
>         (2) check current clocksource in hvc call service.
>         (3) expose current clocksource by adding it to system_time_snapshot.
>         (4) add helper to check if clocksource is arm_arch_counter.
>         (5) rename kvm_ptp.c to ptp_kvm_common.c
> 
> from v3 to v4:
>         (1) fix clocksource of ptp_kvm to arch_sys_counter.
>         (2) move kvm_arch_ptp_get_clock_fn into arm_arch_timer.c
>         (3) subtract cntvoff before return cycles from host.
>         (4) use ktime_get_snapshot instead of getnstimeofday and
> get_current_counterval to return time and counter value.
>         (5) split ktime and counter into two 32-bit block respectively to avoid
> Y2038-safe issue.
>         (6) set time compensation to device time as half of the delay of hvc call.
>         (7) add ARM_ARCH_TIMER as dependency of ptp_kvm for arm64.
> 
> from v2 to v3:
>         (1) fix some issues in commit log.
>         (2) add some receivers in send list.
> 
> from v1 to v2:
>         (1) move arch-specific code from arch/ to driver/ptp/
>         (2) offer mechanism to inform userspace if ptp_kvm service is available.
>         (3) separate ptp_kvm code for arm64 into hypervisor part and guest part.
>         (4) add API to expose monotonic clock and counter value.
>         (5) refine code: remove no necessary part and reconsitution.
> 
> [1]https://git.kernel.org/pub/scm/linux/kernel/git/will/linux.git/
> commit/?h=kvm/hvc&id=125ea89e4a21e2fc5235410f966a996a1a7148bf
> [2]https://git.kernel.org/pub/scm/linux/kernel/git/will/linux.git/
> commit/?h=kvm/hvc&id=464f5a1741e5959c3e4d2be1966ae0093b4dce06
> [3]https://git.kernel.org/pub/scm/linux/kernel/git/will/linux.git/
> commit/?h=kvm/hvc&id=6597490e005d0eeca8ed8c1c1d7b4318ee014681
> [4]https://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux.git/
> commit/?h=for-next/smccc-conduit-
> cleanup&id=6b7fe77c334ae59fed9500140e08f4f896b36871
> 
> Jianyong Wu (6):
>   psci: let arm_smccc_1_1_invoke available by modules
>   ptp: Reorganize ptp_kvm modules to make it arch-independent.
>   time: Add mechanism to recognize clocksource in time_get_snapshot
>   psci: Add hvc call service for ptp_kvm.
>   ptp: arm64: Enable ptp_kvm for arm64
>   kvm: arm64: Add capability check extension for ptp_kvm
> 
> Mark Rutland (1):
>   arm/arm64: smccc/psci: add arm_smccc_1_1_get_conduit()
> 
>  drivers/clocksource/arm_arch_timer.c        | 24 ++++++
>  drivers/firmware/psci/psci.c                | 16 ++++
>  drivers/ptp/Kconfig                         |  2 +-
>  drivers/ptp/Makefile                        |  1 +
>  drivers/ptp/ptp_kvm_arm64.c                 | 53 +++++++++++++
>  drivers/ptp/{ptp_kvm.c => ptp_kvm_common.c} | 77 +++++-------------
>  drivers/ptp/ptp_kvm_x86.c                   | 87 +++++++++++++++++++++
>  include/asm-generic/ptp_kvm.h               | 12 +++
>  include/clocksource/arm_arch_timer.h        |  4 +
>  include/linux/arm-smccc.h                   | 30 ++++++-
>  include/linux/clocksource.h                 |  6 ++
>  include/linux/timekeeping.h                 | 12 +--
>  include/uapi/linux/kvm.h                    |  1 +
>  kernel/time/clocksource.c                   |  3 +
>  kernel/time/timekeeping.c                   |  1 +
>  virt/kvm/arm/arm.c                          |  1 +
>  virt/kvm/arm/psci.c                         | 22 ++++++
>  17 files changed, 286 insertions(+), 66 deletions(-)  create mode 100644
> drivers/ptp/ptp_kvm_arm64.c  rename drivers/ptp/{ptp_kvm.c =>
> ptp_kvm_common.c} (63%)  create mode 100644
> drivers/ptp/ptp_kvm_x86.c  create mode 100644 include/asm-
> generic/ptp_kvm.h
> 
> --
> 2.17.1