| Message ID | 20230609090518.2130926-1-zhaotianrui@loongson.cn (mailing list archive) |
|---|---|
| Headers | show |
| Series | Add KVM LoongArch support | expand |
Please ignore this patch series, as it is incomplete. Thanks Tianrui Zhao 在 2023/6/9 下午5:04, Tianrui Zhao 写道: > This series adds KVM LoongArch support. Loongson 3A5000 supports hardware > assisted virtualization. With cpu virtualization, there are separate > hw-supported user mode and kernel mode in guest mode. With memory > virtualization, there are two-level hw mmu table for guest mode and host > mode. Also there is separate hw cpu timer with consant frequency in > guest mode, so that vm can migrate between hosts with different freq. > Currently, we are able to boot LoongArch Linux Guests. > > Few key aspects of KVM LoongArch added by this series are: > 1. Enable kvm hardware function when kvm module is loaded. > 2. Implement VM and vcpu related ioctl interface such as vcpu create, > vcpu run etc. GET_ONE_REG/SET_ONE_REG ioctl commands are use to > get general registers one by one. > 3. Hardware access about MMU, timer and csr are emulated in kernel. > 4. Hardwares such as mmio and iocsr device are emulated in user space > such as APIC, IPI, pci devices etc. > > The running environment of LoongArch virt machine: > 1. Cross tools to build kernel and uefi: > $ wget https://github.com/loongson/build-tools/releases/download/2022.09.06/loongarch64-clfs-6.3-cross-tools-gcc-glibc.tar.xz > tar -vxf loongarch64-clfs-6.3-cross-tools-gcc-glibc.tar.xz -C /opt > export PATH=/opt/cross-tools/bin:$PATH > export LD_LIBRARY_PATH=/opt/cross-tools/lib:$LD_LIBRARY_PATH > export LD_LIBRARY_PATH=/opt/cross-tools/loongarch64-unknown-linux-gnu/lib/:$LD_LIBRARY_PATH > 2. This series is based on the linux source code: > https://github.com/loongson/linux-loongarch-kvm > Build command: > git checkout kvm-loongarch > make ARCH=loongarch CROSS_COMPILE=loongarch64-unknown-linux-gnu- loongson3_defconfig > make ARCH=loongarch CROSS_COMPILE=loongarch64-unknown-linux-gnu- > 3. QEMU hypervisor with LoongArch supported: > https://github.com/loongson/qemu > Build command: > git checkout kvm-loongarch > ./configure --target-list="loongarch64-softmmu" --enable-kvm > make > 4. Uefi bios of LoongArch virt machine: > Link: https://github.com/tianocore/edk2-platforms/tree/master/Platform/Loongson/LoongArchQemuPkg#readme > 5. you can also access the binary files we have already build: > https://github.com/yangxiaojuan-loongson/qemu-binary > The command to boot loongarch virt machine: > $ qemu-system-loongarch64 -machine virt -m 4G -cpu la464 \ > -smp 1 -bios QEMU_EFI.fd -kernel vmlinuz.efi -initrd ramdisk \ > -serial stdio -monitor telnet:localhost:4495,server,nowait \ > -append "root=/dev/ram rdinit=/sbin/init console=ttyS0,115200" \ > --nographic > > Changes for v13: > 1. Remove patch-28 "Implement probe virtualization when cpu init", as the > virtualization information about FPU,PMP,LSX in guest.options,options_dyn > is not used and the gcfg reg value can be read in kvm_hardware_enable, so > remove the previous cpu_probe_lvz function. > 2. Fix vcpu_enable_cap interface, it should return -EINVAL directly, as > FPU cap is enable by default, and do not support any other caps now. > 3. Simplify the jirl instruction with jr when without return addr, > simplify case HW0 ... HW7 statment in interrupt.c > 4. Rename host_stack,host_gp in kvm_vcpu_arch to host_sp,host_tp. > 5. Remove 'cpu' parameter in _kvm_check_requests, as 'cpu' is not used, > and remove 'cpu' parameter in kvm_check_vmid function, as it can get > cpu number by itself. > > Changes for v12: > 1. Improve the gcsr write/read/xchg interface to avoid the previous > instruction statment like parse_r and make the code easy understanding, > they are implemented in asm/insn-def.h and the instructions consistent > of "opcode" "rj" "rd" "simm14" arguments. > 2. Fix the maintainers list of LoongArch KVM. > > Changes for v11: > 1. Add maintainers for LoongArch KVM. > > Changes for v10: > 1. Fix grammatical problems in LoongArch documentation. > 2. It is not necessary to save or restore the LOONGARCH_CSR_PGD when > vcpu put and vcpu load, so we remove it. > > Changes for v9: > 1. Apply the new defined interrupt number macros in loongarch.h to kvm, > such as INT_SWI0, INT_HWI0, INT_TI, INT_IPI, etc. And remove the > previous unused macros. > 2. Remove unused variables in kvm_vcpu_arch, and reorder the variables > to make them more standard. > > Changes for v8: > 1. Adjust the cpu_data.guest.options structure, add the ases flag into > it, and remove the previous guest.ases. We do this to keep consistent > with host cpu_data.options structure. > 2. Remove the "#include <asm/kvm_host.h>" in some files which also > include the "<linux/kvm_host.h>". As linux/kvm_host.h already include > the asm/kvm_host.h. > 3. Fix some unstandard spelling and grammar errors in comments, and > improve a little code format to make it easier and standard. > > Changes for v7: > 1. Fix the kvm_save/restore_hw_gcsr compiling warnings reported by > kernel test robot. The report link is: > https://lore.kernel.org/oe-kbuild-all/202304131526.iXfLaVZc-lkp@intel.com/ > 2. Fix loongarch kvm trace related compiling problems. > > Changes for v6: > 1. Fix the Documentation/virt/kvm/api.rst compile warning about > loongarch parts. > > Changes for v5: > 1. Implement get/set mp_state ioctl interface, and only the > KVM_MP_STATE_RUNNABLE state is supported now, and other states > will be completed in the future. The state is also used when vcpu > run idle instruction, if vcpu state is changed to RUNNABLE, the > vcpu will have the possibility to be woken up. > 2. Supplement kvm document about loongarch-specific part, such as add > api introduction for GET/SET_ONE_REG, GET/SET_FPU, GET/SET_MP_STATE, > etc. > 3. Improve the kvm_switch_to_guest function in switch.S, remove the > previous tmp,tmp1 arguments and replace it with t0,t1 reg. > > Changes for v4: > 1. Add a csr_need_update flag in _vcpu_put, as most csr registers keep > unchanged during process context switch, so we need not to update it > every time. We can do this only if the soft csr is different form hardware. > That is to say all of csrs should update after vcpu enter guest, as for > set_csr_ioctl, we have written soft csr to keep consistent with hardware. > 2. Improve get/set_csr_ioctl interface, we set SW or HW or INVALID flag > for all csrs according to it's features when kvm init. In get/set_csr_ioctl, > if csr is HW, we use gcsrrd/ gcsrwr instruction to access it, else if csr is > SW, we use software to emulate it, and others return false. > 3. Add set_hw_gcsr function in csr_ops.S, and it is used in set_csr_ioctl. > We have splited hw gcsr into three parts, so we can calculate the code offset > by gcsrid and jump here to run the gcsrwr instruction. We use this function to > make the code easier and avoid to use the previous SET_HW_GCSR(XXX) interface. > 4. Improve kvm mmu functions, such as flush page table and make clean page table > interface. > > Changes for v3: > 1. Remove the vpid array list in kvm_vcpu_arch and use a vpid variable here, > because a vpid will never be recycled if a vCPU migrates from physical CPU A > to B and back to A. > 2. Make some constant variables in kvm_context to global such as vpid_mask, > guest_eentry, enter_guest, etc. > 3. Add some new tracepoints, such as kvm_trace_idle, kvm_trace_cache, > kvm_trace_gspr, etc. > 4. There are some duplicate codes in kvm_handle_exit and kvm_vcpu_run, > so we move it to a new function kvm_pre_enter_guest. > 5. Change the RESUME_HOST, RESUME_GUEST value, return 1 for resume guest > and "<= 0" for resume host. > 6. Fcsr and fpu registers are saved/restored together. > > Changes for v2: > 1. Seprate the original patch-01 and patch-03 into small patches, and the > patches mainly contain kvm module init, module exit, vcpu create, vcpu run, > etc. > 2. Remove the original KVM_{GET,SET}_CSRS ioctl in the kvm uapi header, > and we use the common KVM_{GET,SET}_ONE_REG to access register. > 3. Use BIT(x) to replace the "1 << n_bits" statement. > > Tianrui Zhao (30): > LoongArch: KVM: Add kvm related header files > LoongArch: KVM: Implement kvm module related interface > LoongArch: KVM: Implement kvm hardware enable, disable interface > LoongArch: KVM: Implement VM related functions > LoongArch: KVM: Add vcpu related header files > LoongArch: KVM: Implement vcpu create and destroy interface > LoongArch: KVM: Implement vcpu run interface > LoongArch: KVM: Implement vcpu handle exit interface > LoongArch: KVM: Implement vcpu get, vcpu set registers > LoongArch: KVM: Implement vcpu ENABLE_CAP ioctl interface > LoongArch: KVM: Implement fpu related operations for vcpu > LoongArch: KVM: Implement vcpu interrupt operations > LoongArch: KVM: Implement misc vcpu related interfaces > LoongArch: KVM: Implement vcpu load and vcpu put operations > LoongArch: KVM: Implement vcpu status description > LoongArch: KVM: Implement update VM id function > LoongArch: KVM: Implement virtual machine tlb operations > LoongArch: KVM: Implement vcpu timer operations > LoongArch: KVM: Implement kvm mmu operations > LoongArch: KVM: Implement handle csr excption > LoongArch: KVM: Implement handle iocsr exception > LoongArch: KVM: Implement handle idle exception > LoongArch: KVM: Implement handle gspr exception > LoongArch: KVM: Implement handle mmio exception > LoongArch: KVM: Implement handle fpu exception > LoongArch: KVM: Implement kvm exception vector > LoongArch: KVM: Implement vcpu world switch > LoongArch: KVM: Enable kvm config and add the makefile > LoongArch: KVM: Supplement kvm document about LoongArch-specific part > LoongArch: KVM: Add maintainers for LoongArch KVM > > Documentation/virt/kvm/api.rst | 71 +- > MAINTAINERS | 12 + > arch/loongarch/Kbuild | 1 + > arch/loongarch/Kconfig | 2 + > arch/loongarch/configs/loongson3_defconfig | 2 + > arch/loongarch/include/asm/insn-def.h | 55 ++ > arch/loongarch/include/asm/inst.h | 16 + > arch/loongarch/include/asm/kvm_csr.h | 231 ++++++ > arch/loongarch/include/asm/kvm_host.h | 253 ++++++ > arch/loongarch/include/asm/kvm_types.h | 11 + > arch/loongarch/include/asm/kvm_vcpu.h | 97 +++ > arch/loongarch/include/asm/loongarch.h | 20 +- > arch/loongarch/include/uapi/asm/kvm.h | 106 +++ > arch/loongarch/kernel/asm-offsets.c | 32 + > arch/loongarch/kvm/Kconfig | 38 + > arch/loongarch/kvm/Makefile | 22 + > arch/loongarch/kvm/csr_ops.S | 76 ++ > arch/loongarch/kvm/exit.c | 707 +++++++++++++++++ > arch/loongarch/kvm/interrupt.c | 113 +++ > arch/loongarch/kvm/main.c | 347 ++++++++ > arch/loongarch/kvm/mmu.c | 725 +++++++++++++++++ > arch/loongarch/kvm/switch.S | 301 +++++++ > arch/loongarch/kvm/timer.c | 266 +++++++ > arch/loongarch/kvm/tlb.c | 32 + > arch/loongarch/kvm/trace.h | 168 ++++ > arch/loongarch/kvm/vcpu.c | 869 +++++++++++++++++++++ > arch/loongarch/kvm/vm.c | 76 ++ > arch/loongarch/kvm/vmid.c | 66 ++ > include/uapi/linux/kvm.h | 9 + > 29 files changed, 4710 insertions(+), 14 deletions(-) > create mode 100644 arch/loongarch/include/asm/insn-def.h > create mode 100644 arch/loongarch/include/asm/kvm_csr.h > create mode 100644 arch/loongarch/include/asm/kvm_host.h > create mode 100644 arch/loongarch/include/asm/kvm_types.h > create mode 100644 arch/loongarch/include/asm/kvm_vcpu.h > create mode 100644 arch/loongarch/include/uapi/asm/kvm.h > create mode 100644 arch/loongarch/kvm/Kconfig > create mode 100644 arch/loongarch/kvm/Makefile > create mode 100644 arch/loongarch/kvm/csr_ops.S > create mode 100644 arch/loongarch/kvm/exit.c > create mode 100644 arch/loongarch/kvm/interrupt.c > create mode 100644 arch/loongarch/kvm/main.c > create mode 100644 arch/loongarch/kvm/mmu.c > create mode 100644 arch/loongarch/kvm/switch.S > create mode 100644 arch/loongarch/kvm/timer.c > create mode 100644 arch/loongarch/kvm/tlb.c > create mode 100644 arch/loongarch/kvm/trace.h > create mode 100644 arch/loongarch/kvm/vcpu.c > create mode 100644 arch/loongarch/kvm/vm.c > create mode 100644 arch/loongarch/kvm/vmid.c >
This series adds KVM LoongArch support. Loongson 3A5000 supports hardware assisted virtualization. With cpu virtualization, there are separate hw-supported user mode and kernel mode in guest mode. With memory virtualization, there are two-level hw mmu table for guest mode and host mode. Also there is separate hw cpu timer with consant frequency in guest mode, so that vm can migrate between hosts with different freq. Currently, we are able to boot LoongArch Linux Guests. Few key aspects of KVM LoongArch added by this series are: 1. Enable kvm hardware function when kvm module is loaded. 2. Implement VM and vcpu related ioctl interface such as vcpu create, vcpu run etc. GET_ONE_REG/SET_ONE_REG ioctl commands are use to get general registers one by one. 3. Hardware access about MMU, timer and csr are emulated in kernel. 4. Hardwares such as mmio and iocsr device are emulated in user space such as APIC, IPI, pci devices etc. The running environment of LoongArch virt machine: 1. Cross tools to build kernel and uefi: $ wget https://github.com/loongson/build-tools/releases/download/2022.09.06/loongarch64-clfs-6.3-cross-tools-gcc-glibc.tar.xz tar -vxf loongarch64-clfs-6.3-cross-tools-gcc-glibc.tar.xz -C /opt export PATH=/opt/cross-tools/bin:$PATH export LD_LIBRARY_PATH=/opt/cross-tools/lib:$LD_LIBRARY_PATH export LD_LIBRARY_PATH=/opt/cross-tools/loongarch64-unknown-linux-gnu/lib/:$LD_LIBRARY_PATH 2. This series is based on the linux source code: https://github.com/loongson/linux-loongarch-kvm Build command: git checkout kvm-loongarch make ARCH=loongarch CROSS_COMPILE=loongarch64-unknown-linux-gnu- loongson3_defconfig make ARCH=loongarch CROSS_COMPILE=loongarch64-unknown-linux-gnu- 3. QEMU hypervisor with LoongArch supported: https://github.com/loongson/qemu Build command: git checkout kvm-loongarch ./configure --target-list="loongarch64-softmmu" --enable-kvm make 4. Uefi bios of LoongArch virt machine: Link: https://github.com/tianocore/edk2-platforms/tree/master/Platform/Loongson/LoongArchQemuPkg#readme 5. you can also access the binary files we have already build: https://github.com/yangxiaojuan-loongson/qemu-binary The command to boot loongarch virt machine: $ qemu-system-loongarch64 -machine virt -m 4G -cpu la464 \ -smp 1 -bios QEMU_EFI.fd -kernel vmlinuz.efi -initrd ramdisk \ -serial stdio -monitor telnet:localhost:4495,server,nowait \ -append "root=/dev/ram rdinit=/sbin/init console=ttyS0,115200" \ --nographic Changes for v13: 1. Remove patch-28 "Implement probe virtualization when cpu init", as the virtualization information about FPU,PMP,LSX in guest.options,options_dyn is not used and the gcfg reg value can be read in kvm_hardware_enable, so remove the previous cpu_probe_lvz function. 2. Fix vcpu_enable_cap interface, it should return -EINVAL directly, as FPU cap is enable by default, and do not support any other caps now. 3. Simplify the jirl instruction with jr when without return addr, simplify case HW0 ... HW7 statment in interrupt.c 4. Rename host_stack,host_gp in kvm_vcpu_arch to host_sp,host_tp. 5. Remove 'cpu' parameter in _kvm_check_requests, as 'cpu' is not used, and remove 'cpu' parameter in kvm_check_vmid function, as it can get cpu number by itself. Changes for v12: 1. Improve the gcsr write/read/xchg interface to avoid the previous instruction statment like parse_r and make the code easy understanding, they are implemented in asm/insn-def.h and the instructions consistent of "opcode" "rj" "rd" "simm14" arguments. 2. Fix the maintainers list of LoongArch KVM. Changes for v11: 1. Add maintainers for LoongArch KVM. Changes for v10: 1. Fix grammatical problems in LoongArch documentation. 2. It is not necessary to save or restore the LOONGARCH_CSR_PGD when vcpu put and vcpu load, so we remove it. Changes for v9: 1. Apply the new defined interrupt number macros in loongarch.h to kvm, such as INT_SWI0, INT_HWI0, INT_TI, INT_IPI, etc. And remove the previous unused macros. 2. Remove unused variables in kvm_vcpu_arch, and reorder the variables to make them more standard. Changes for v8: 1. Adjust the cpu_data.guest.options structure, add the ases flag into it, and remove the previous guest.ases. We do this to keep consistent with host cpu_data.options structure. 2. Remove the "#include <asm/kvm_host.h>" in some files which also include the "<linux/kvm_host.h>". As linux/kvm_host.h already include the asm/kvm_host.h. 3. Fix some unstandard spelling and grammar errors in comments, and improve a little code format to make it easier and standard. Changes for v7: 1. Fix the kvm_save/restore_hw_gcsr compiling warnings reported by kernel test robot. The report link is: https://lore.kernel.org/oe-kbuild-all/202304131526.iXfLaVZc-lkp@intel.com/ 2. Fix loongarch kvm trace related compiling problems. Changes for v6: 1. Fix the Documentation/virt/kvm/api.rst compile warning about loongarch parts. Changes for v5: 1. Implement get/set mp_state ioctl interface, and only the KVM_MP_STATE_RUNNABLE state is supported now, and other states will be completed in the future. The state is also used when vcpu run idle instruction, if vcpu state is changed to RUNNABLE, the vcpu will have the possibility to be woken up. 2. Supplement kvm document about loongarch-specific part, such as add api introduction for GET/SET_ONE_REG, GET/SET_FPU, GET/SET_MP_STATE, etc. 3. Improve the kvm_switch_to_guest function in switch.S, remove the previous tmp,tmp1 arguments and replace it with t0,t1 reg. Changes for v4: 1. Add a csr_need_update flag in _vcpu_put, as most csr registers keep unchanged during process context switch, so we need not to update it every time. We can do this only if the soft csr is different form hardware. That is to say all of csrs should update after vcpu enter guest, as for set_csr_ioctl, we have written soft csr to keep consistent with hardware. 2. Improve get/set_csr_ioctl interface, we set SW or HW or INVALID flag for all csrs according to it's features when kvm init. In get/set_csr_ioctl, if csr is HW, we use gcsrrd/ gcsrwr instruction to access it, else if csr is SW, we use software to emulate it, and others return false. 3. Add set_hw_gcsr function in csr_ops.S, and it is used in set_csr_ioctl. We have splited hw gcsr into three parts, so we can calculate the code offset by gcsrid and jump here to run the gcsrwr instruction. We use this function to make the code easier and avoid to use the previous SET_HW_GCSR(XXX) interface. 4. Improve kvm mmu functions, such as flush page table and make clean page table interface. Changes for v3: 1. Remove the vpid array list in kvm_vcpu_arch and use a vpid variable here, because a vpid will never be recycled if a vCPU migrates from physical CPU A to B and back to A. 2. Make some constant variables in kvm_context to global such as vpid_mask, guest_eentry, enter_guest, etc. 3. Add some new tracepoints, such as kvm_trace_idle, kvm_trace_cache, kvm_trace_gspr, etc. 4. There are some duplicate codes in kvm_handle_exit and kvm_vcpu_run, so we move it to a new function kvm_pre_enter_guest. 5. Change the RESUME_HOST, RESUME_GUEST value, return 1 for resume guest and "<= 0" for resume host. 6. Fcsr and fpu registers are saved/restored together. Changes for v2: 1. Seprate the original patch-01 and patch-03 into small patches, and the patches mainly contain kvm module init, module exit, vcpu create, vcpu run, etc. 2. Remove the original KVM_{GET,SET}_CSRS ioctl in the kvm uapi header, and we use the common KVM_{GET,SET}_ONE_REG to access register. 3. Use BIT(x) to replace the "1 << n_bits" statement. Tianrui Zhao (30): LoongArch: KVM: Add kvm related header files LoongArch: KVM: Implement kvm module related interface LoongArch: KVM: Implement kvm hardware enable, disable interface LoongArch: KVM: Implement VM related functions LoongArch: KVM: Add vcpu related header files LoongArch: KVM: Implement vcpu create and destroy interface LoongArch: KVM: Implement vcpu run interface LoongArch: KVM: Implement vcpu handle exit interface LoongArch: KVM: Implement vcpu get, vcpu set registers LoongArch: KVM: Implement vcpu ENABLE_CAP ioctl interface LoongArch: KVM: Implement fpu related operations for vcpu LoongArch: KVM: Implement vcpu interrupt operations LoongArch: KVM: Implement misc vcpu related interfaces LoongArch: KVM: Implement vcpu load and vcpu put operations LoongArch: KVM: Implement vcpu status description LoongArch: KVM: Implement update VM id function LoongArch: KVM: Implement virtual machine tlb operations LoongArch: KVM: Implement vcpu timer operations LoongArch: KVM: Implement kvm mmu operations LoongArch: KVM: Implement handle csr excption LoongArch: KVM: Implement handle iocsr exception LoongArch: KVM: Implement handle idle exception LoongArch: KVM: Implement handle gspr exception LoongArch: KVM: Implement handle mmio exception LoongArch: KVM: Implement handle fpu exception LoongArch: KVM: Implement kvm exception vector LoongArch: KVM: Implement vcpu world switch LoongArch: KVM: Enable kvm config and add the makefile LoongArch: KVM: Supplement kvm document about LoongArch-specific part LoongArch: KVM: Add maintainers for LoongArch KVM Documentation/virt/kvm/api.rst | 71 +- MAINTAINERS | 12 + arch/loongarch/Kbuild | 1 + arch/loongarch/Kconfig | 2 + arch/loongarch/configs/loongson3_defconfig | 2 + arch/loongarch/include/asm/insn-def.h | 55 ++ arch/loongarch/include/asm/inst.h | 16 + arch/loongarch/include/asm/kvm_csr.h | 231 ++++++ arch/loongarch/include/asm/kvm_host.h | 253 ++++++ arch/loongarch/include/asm/kvm_types.h | 11 + arch/loongarch/include/asm/kvm_vcpu.h | 97 +++ arch/loongarch/include/asm/loongarch.h | 20 +- arch/loongarch/include/uapi/asm/kvm.h | 106 +++ arch/loongarch/kernel/asm-offsets.c | 32 + arch/loongarch/kvm/Kconfig | 38 + arch/loongarch/kvm/Makefile | 22 + arch/loongarch/kvm/csr_ops.S | 76 ++ arch/loongarch/kvm/exit.c | 707 +++++++++++++++++ arch/loongarch/kvm/interrupt.c | 113 +++ arch/loongarch/kvm/main.c | 347 ++++++++ arch/loongarch/kvm/mmu.c | 725 +++++++++++++++++ arch/loongarch/kvm/switch.S | 301 +++++++ arch/loongarch/kvm/timer.c | 266 +++++++ arch/loongarch/kvm/tlb.c | 32 + arch/loongarch/kvm/trace.h | 168 ++++ arch/loongarch/kvm/vcpu.c | 869 +++++++++++++++++++++ arch/loongarch/kvm/vm.c | 76 ++ arch/loongarch/kvm/vmid.c | 66 ++ include/uapi/linux/kvm.h | 9 + 29 files changed, 4710 insertions(+), 14 deletions(-) create mode 100644 arch/loongarch/include/asm/insn-def.h create mode 100644 arch/loongarch/include/asm/kvm_csr.h create mode 100644 arch/loongarch/include/asm/kvm_host.h create mode 100644 arch/loongarch/include/asm/kvm_types.h create mode 100644 arch/loongarch/include/asm/kvm_vcpu.h create mode 100644 arch/loongarch/include/uapi/asm/kvm.h create mode 100644 arch/loongarch/kvm/Kconfig create mode 100644 arch/loongarch/kvm/Makefile create mode 100644 arch/loongarch/kvm/csr_ops.S create mode 100644 arch/loongarch/kvm/exit.c create mode 100644 arch/loongarch/kvm/interrupt.c create mode 100644 arch/loongarch/kvm/main.c create mode 100644 arch/loongarch/kvm/mmu.c create mode 100644 arch/loongarch/kvm/switch.S create mode 100644 arch/loongarch/kvm/timer.c create mode 100644 arch/loongarch/kvm/tlb.c create mode 100644 arch/loongarch/kvm/trace.h create mode 100644 arch/loongarch/kvm/vcpu.c create mode 100644 arch/loongarch/kvm/vm.c create mode 100644 arch/loongarch/kvm/vmid.c