[v22,00/25] Add KVM LoongArch support

Message

zhaotianrui Sept. 27, 2023, 3:09 a.m. UTC

From: zhaotianrui <[e-mail]>

This series adds KVM LoongArch support. Loongson 3A5000 supports hardware
assisted virtualization. With cpu virtualization, there are separate
hw-supported user mode and kernel mode in guest mode. With memory
virtualization, there are two-level hw mmu table for guest mode and host
mode. Also there is separate hw cpu timer with consant frequency in
guest mode, so that vm can migrate between hosts with different freq.
Currently, we are able to boot LoongArch Linux Guests.

Few key aspects of KVM LoongArch added by this series are:
1. Enable kvm hardware function when kvm module is loaded.
2. Implement VM and vcpu related ioctl interface such as vcpu create,
   vcpu run etc. GET_ONE_REG/SET_ONE_REG ioctl commands are use to
   get general registers one by one.
3. Hardware access about MMU, timer and csr are emulated in kernel.
4. Hardwares such as mmio and iocsr device are emulated in user space
   such as APIC, IPI, pci devices etc.

The running environment of LoongArch virt machine:
1. Cross tools for building kernel and uefi:
   https://github.com/loongson/build-tools
2. This series is based on the linux source code:
   https://github.com/loongson/linux-loongarch-kvm
   Build command:
   git checkout kvm-loongarch
   make ARCH=loongarch CROSS_COMPILE=loongarch64-unknown-linux-gnu- loongson3_defconfig
   make ARCH=loongarch CROSS_COMPILE=loongarch64-unknown-linux-gnu-
3. QEMU hypervisor with LoongArch supported:
   https://github.com/loongson/qemu
   Build command:
   git checkout kvm-loongarch
   ./configure --target-list="loongarch64-softmmu"  --enable-kvm
   make
4. Uefi bios of LoongArch virt machine:
   Link: https://github.com/tianocore/edk2-platforms/tree/master/Platform/Loongson/LoongArchQemuPkg#readme
5. you can also access the binary files we have already build:
   https://github.com/yangxiaojuan-loongson/qemu-binary
The command to boot loongarch virt machine:
   $ qemu-system-loongarch64 -machine virt -m 4G -cpu la464 \
   -smp 1 -bios QEMU_EFI.fd -kernel vmlinuz.efi -initrd ramdisk \
   -serial stdio   -monitor telnet:localhost:4495,server,nowait \
   -append "root=/dev/ram rdinit=/sbin/init console=ttyS0,115200" \
   --nographic

Changes for v22:
1.  Combine very small patches.
2.  Define KVM_REG_LOONGARCH_KVM registers begin with 1.
3.  Remove unused KVM_LOONGSON_IRQ_* definitions.
4.  Mark HW_GCSR/SW_GCSR correctly in kvm_init_gcsr_flag().
5.  Make kvm_flush_tlb_gpa() be a void function, since it always
return 0.
6.  Rename KVM_REG_LOONGARCH_FPU to KVM_REG_LOONGARCH_FPSIMD
which is more accurate.
7.  Rename KVM_LARCH_CSR to KVM_LARCH_SWCSR_LATEST, corresponding
to KVM_LARCH_HWCSR_USABLE.
8.  Rename int_to_coreint to priority_to_irq, corresponding to the
defined variable names.
9.  Replace if-else with switch-case in kvm_handle_csr().
10. Replace if-else with switch-case in kvm_emu_mmio_read() and
kvm_emu_mmio_write().
11. Remove ANON_INODES/SRCU in Kconfig since they are already
selected unconditinally.
12. Many coding style adjustment and typo fixes.
13. Remove kvm_init_fault function and init kvm_fault_tables when it
is defined.

Changes for v21:
1. Remove unnecessary prefix '_' in some kvm function names.
2. Replace check_vmid with check_vpid, and move the functions
to main.c.
3. Re-order the file names and config names by alphabetical
in KVM makefile and Kconfig.
4. Code clean up for KVM mmu and get,set gcsr and vcpu_arch
ioctl functions.

changes for v20:
1. Remove the binary code of virtualization instructions in
insn_def.h and csr_ops.S and directly use the default csrrd,
csrwr,csrxchg instructions. And let CONFIG_KVM depends on the
AS_HAS_LVZ_EXTENSION, so we should use the binutils that have
already supported them to compile the KVM. This can make our
LoongArch KVM codes more maintainable and easier.

changes for v19:
1. Use the common interface xfer_to_guest_mode_handle_work to
Check conditions before entering the guest.
2. Add vcpu dirty ring support.

changes for v18:
1. Code cleanup for vcpu timer: remove unnecessary timer_period_ns,
timer_bias, timer_dyn_bias variables in kvm_vcpu_arch and rename
the stable_ktime_saved variable to expire.
2. Change the value of KVM_ARCH_NR_OBJS_PER_MEMORY_CACHE to 40.

changes for v17:
1. Add CONFIG_AS_HAS_LVZ_EXTENSION config option which depends on
binutils that support LVZ assemble instruction.
2. Change kvm mmu related functions, such as rename level2_ptw_pgd
to kvm_ptw_pgd, replace kvm_flush_range with kvm_ptw_pgd pagewalk
framework, replace kvm_arch.gpa_mm with kvm_arch.pgd, set
mark_page_dirty/kvm_set_pfn_dirty out of mmu_lock in kvm page fault
handling.
3. Replace kvm_loongarch_interrupt with standard kvm_interrupt
when injecting IRQ.
4. Replace vcpu_arch.last_exec_cpu with existing vcpu.cpu, remove
kvm_arch.online_vcpus and kvm_arch.is_migrating,
5. Remove EXCCODE_TLBNR and EXCCODE_TLBNX in kvm exception table,
since NR/NX bit is not set in kvm page fault handling.

Changes for v16:
1. Free allocated memory of vmcs,kvm_loongarch_ops in kvm module init,
exit to avoid memory leak problem.
2. Simplify some assemble codes in switch.S which are necessary to be
replaced with pseudo-instructions. And any other instructions do not need
to be replaced anymore.
3. Add kvm_{save,restore}_guest_gprs macros to replace these ld.d,st.d
guest regs instructions when vcpu world switch.
4. It is more secure to disable irq when flush guest tlb by gpa, so replace
preempt_disable with loacl_irq_save in kvm_flush_tlb_gpa.

Changes for v15:
1. Re-order some macros and variables in LoongArch kvm headers, put them
together which have the same meaning.
2. Make some function definitions in one line, as it is not needed to split
them.
3. Re-name some macros such as KVM_REG_LOONGARCH_GPR.

Changes for v14:
1. Remove the macro CONFIG_KVM_GENERIC_HARDWARE_ENABLING in
loongarch/kvm/main.c, as it is not useful.
2. Add select KVM_GENERIC_HARDWARE_ENABLING in loongarch/kvm/Kconfig,
as it is used by virt/kvm.
3. Fix the LoongArch KVM source link in MAINTAINERS.
4. Improve LoongArch KVM documentation, such as add comment for
LoongArch kvm_regs.

Changes for v13:
1. Remove patch-28 "Implement probe virtualization when cpu init", as the
virtualization information about FPU,PMP,LSX in guest.options,options_dyn
is not used and the gcfg reg value can be read in kvm_hardware_enable, so
remove the previous cpu_probe_lvz function.
2. Fix vcpu_enable_cap interface, it should return -EINVAL directly, as
FPU cap is enable by default, and do not support any other caps now.
3. Simplify the jirl instruction with jr when without return addr,
simplify case HW0 ... HW7 statment in interrupt.c
4. Rename host_stack,host_gp in kvm_vcpu_arch to host_sp,host_tp.
5. Remove 'cpu' parameter in _kvm_check_requests, as 'cpu' is not used,
and remove 'cpu' parameter in kvm_check_vmid function, as it can get
cpu number by itself.

Changes for v12:
1. Improve the gcsr write/read/xchg interface to avoid the previous
instruction statment like parse_r and make the code easy understanding,
they are implemented in asm/insn-def.h and the instructions consistent
of "opcode" "rj" "rd" "simm14" arguments.
2. Fix the maintainers list of LoongArch KVM.

Changes for v11:
1. Add maintainers for LoongArch KVM.

Changes for v10:
1. Fix grammatical problems in LoongArch documentation.
2. It is not necessary to save or restore the LOONGARCH_CSR_PGD when
vcpu put and vcpu load, so we remove it.

Changes for v9:
1. Apply the new defined interrupt number macros in loongarch.h to kvm,
such as INT_SWI0, INT_HWI0, INT_TI, INT_IPI, etc. And remove the
previous unused macros.
2. Remove unused variables in kvm_vcpu_arch, and reorder the variables
to make them more standard.

Changes for v8:
1. Adjust the cpu_data.guest.options structure, add the ases flag into
it, and remove the previous guest.ases. We do this to keep consistent
with host cpu_data.options structure.
2. Remove the "#include <asm/kvm_host.h>" in some files which also
include the "<linux/kvm_host.h>". As linux/kvm_host.h already include
the asm/kvm_host.h.
3. Fix some unstandard spelling and grammar errors in comments, and
improve a little code format to make it easier and standard.

Changes for v7:
1. Fix the kvm_save/restore_hw_gcsr compiling warnings reported by
kernel test robot. The report link is:
https://lore.kernel.org/oe-kbuild-all/[e-mail]/
2. Fix loongarch kvm trace related compiling problems.

Changes for v6:
1. Fix the Documentation/virt/kvm/api.rst compile warning about
loongarch parts.

Changes for v5:
1. Implement get/set mp_state ioctl interface, and only the
KVM_MP_STATE_RUNNABLE state is supported now, and other states
will be completed in the future. The state is also used when vcpu
run idle instruction, if vcpu state is changed to RUNNABLE, the
vcpu will have the possibility to be woken up.
2. Supplement kvm document about loongarch-specific part, such as add
api introduction for GET/SET_ONE_REG, GET/SET_FPU, GET/SET_MP_STATE,
etc.
3. Improve the kvm_switch_to_guest function in switch.S, remove the
previous tmp,tmp1 arguments and replace it with t0,t1 reg.

Changes for v4:
1. Add a csr_need_update flag in _vcpu_put, as most csr registers keep
unchanged during process context switch, so we need not to update it
every time. We can do this only if the soft csr is different form hardware.
That is to say all of csrs should update after vcpu enter guest, as for
set_csr_ioctl, we have written soft csr to keep consistent with hardware.
2. Improve get/set_csr_ioctl interface, we set SW or HW or INVALID flag
for all csrs according to it's features when kvm init. In get/set_csr_ioctl,
if csr is HW, we use gcsrrd/ gcsrwr instruction to access it, else if csr is
SW, we use software to emulate it, and others return false.
3. Add set_hw_gcsr function in csr_ops.S, and it is used in set_csr_ioctl.
We have splited hw gcsr into three parts, so we can calculate the code offset
by gcsrid and jump here to run the gcsrwr instruction. We use this function to
make the code easier and avoid to use the previous SET_HW_GCSR(XXX) interface.
4. Improve kvm mmu functions, such as flush page table and make clean page table
interface.

Changes for v3:
1. Remove the vpid array list in kvm_vcpu_arch and use a vpid variable here,
because a vpid will never be recycled if a vCPU migrates from physical CPU A
to B and back to A.
2. Make some constant variables in kvm_context to global such as vpid_mask,
guest_eentry, enter_guest, etc.
3. Add some new tracepoints, such as kvm_trace_idle, kvm_trace_cache,
kvm_trace_gspr, etc.
4. There are some duplicate codes in kvm_handle_exit and kvm_vcpu_run,
so we move it to a new function kvm_pre_enter_guest.
5. Change the RESUME_HOST, RESUME_GUEST value, return 1 for resume guest
and "<= 0" for resume host.
6. Fcsr and fpu registers are saved/restored together.

Changes for v2:
1. Seprate the original patch-01 and patch-03 into small patches, and the
patches mainly contain kvm module init, module exit, vcpu create, vcpu run,
etc.
2. Remove the original KVM_{GET,SET}_CSRS ioctl in the kvm uapi header,
and we use the common KVM_{GET,SET}_ONE_REG to access register.
3. Use BIT(x) to replace the "1 << n_bits" statement.

Tianrui Zhao (25):
  LoongArch: KVM: Add kvm related header files
  LoongArch: KVM: Implement kvm module related interface
  LoongArch: KVM: Implement kvm hardware enable, disable interface
  LoongArch: KVM: Implement VM related functions
  LoongArch: KVM: Add vcpu related header files
  LoongArch: KVM: Implement basic vcpu interfaces
  LoongArch: KVM: Implement basic vcpu ioctl interfaces
  LoongArch: KVM: Implement fpu operations for vcpu
  LoongArch: KVM: Implement vcpu interrupt operations
  LoongArch: KVM: Implement vcpu load and vcpu put operations
  LoongArch: KVM: Implement misc vcpu related interfaces
  LoongArch: KVM: Implement vcpu timer operations
  LoongArch: KVM: Implement virtual machine tlb operations
  LoongArch: KVM: Implement kvm mmu operations
  LoongArch: KVM: Implement handle csr exception
  LoongArch: KVM: Implement handle iocsr exception
  LoongArch: KVM: Implement handle idle exception
  LoongArch: KVM: Implement handle gspr exception
  LoongArch: KVM: Implement handle mmio exception
  LoongArch: KVM: Implement handle fpu exception
  LoongArch: KVM: Implement kvm exception vectors
  LoongArch: KVM: Implement vcpu world switch
  LoongArch: KVM: Enable kvm config and add the makefile
  LoongArch: KVM: Supplement kvm document about LoongArch-specific part
  LoongArch: KVM: Add maintainers for LoongArch KVM

 Documentation/virt/kvm/api.rst             |  70 +-
 MAINTAINERS                                |  12 +
 arch/loongarch/Kbuild                      |   2 +
 arch/loongarch/Kconfig                     |   6 +
 arch/loongarch/configs/loongson3_defconfig |   2 +
 arch/loongarch/include/asm/inst.h          |  16 +
 arch/loongarch/include/asm/kvm_csr.h       | 211 +++++
 arch/loongarch/include/asm/kvm_host.h      | 237 ++++++
 arch/loongarch/include/asm/kvm_mmu.h       | 139 +++
 arch/loongarch/include/asm/kvm_types.h     |  11 +
 arch/loongarch/include/asm/kvm_vcpu.h      |  93 ++
 arch/loongarch/include/asm/loongarch.h     |  19 +-
 arch/loongarch/include/uapi/asm/kvm.h      | 108 +++
 arch/loongarch/kernel/asm-offsets.c        |  32 +
 arch/loongarch/kvm/Kconfig                 |  40 +
 arch/loongarch/kvm/Makefile                |  20 +
 arch/loongarch/kvm/exit.c                  | 696 +++++++++++++++
 arch/loongarch/kvm/interrupt.c             | 183 ++++
 arch/loongarch/kvm/main.c                  | 420 +++++++++
 arch/loongarch/kvm/mmu.c                   | 914 ++++++++++++++++++++
 arch/loongarch/kvm/switch.S                | 250 ++++++
 arch/loongarch/kvm/timer.c                 | 197 +++++
 arch/loongarch/kvm/tlb.c                   |  32 +
 arch/loongarch/kvm/trace.h                 | 162 ++++
 arch/loongarch/kvm/vcpu.c                  | 939 +++++++++++++++++++++
 arch/loongarch/kvm/vm.c                    |  92 ++
 include/uapi/linux/kvm.h                   |   9 +
 27 files changed, 4898 insertions(+), 14 deletions(-)
 create mode 100644 arch/loongarch/include/asm/kvm_csr.h
 create mode 100644 arch/loongarch/include/asm/kvm_host.h
 create mode 100644 arch/loongarch/include/asm/kvm_mmu.h
 create mode 100644 arch/loongarch/include/asm/kvm_types.h
 create mode 100644 arch/loongarch/include/asm/kvm_vcpu.h
 create mode 100644 arch/loongarch/include/uapi/asm/kvm.h
 create mode 100644 arch/loongarch/kvm/Kconfig
 create mode 100644 arch/loongarch/kvm/Makefile
 create mode 100644 arch/loongarch/kvm/exit.c
 create mode 100644 arch/loongarch/kvm/interrupt.c
 create mode 100644 arch/loongarch/kvm/main.c
 create mode 100644 arch/loongarch/kvm/mmu.c
 create mode 100644 arch/loongarch/kvm/switch.S
 create mode 100644 arch/loongarch/kvm/timer.c
 create mode 100644 arch/loongarch/kvm/tlb.c
 create mode 100644 arch/loongarch/kvm/trace.h
 create mode 100644 arch/loongarch/kvm/vcpu.c
 create mode 100644 arch/loongarch/kvm/vm.c