@@ -20,14 +20,21 @@
#endif
#ifdef CONFIG_32BIT
-
+#ifdef CONFIG_KVM_GUEST
+#define CAC_BASE _AC(0x40000000, UL)
+#else
#define CAC_BASE _AC(0x80000000, UL)
+#endif
#define IO_BASE _AC(0xa0000000, UL)
#define UNCAC_BASE _AC(0xa0000000, UL)
#ifndef MAP_BASE
+#ifdef CONFIG_KVM_GUEST
+#define MAP_BASE _AC(0x60000000, UL)
+#else
#define MAP_BASE _AC(0xc0000000, UL)
#endif
+#endif
/*
* Memory above this physical address will be considered highmem.
@@ -44,11 +44,16 @@ extern unsigned int vced_count, vcei_count;
#define SPECIAL_PAGES_SIZE PAGE_SIZE
#ifdef CONFIG_32BIT
+#ifdef CONFIG_KVM_GUEST
+/* User space process size is limited to 1GB in KVM Guest Mode */
+#define TASK_SIZE 0x3fff8000UL
+#else
/*
* User space process size: 2GB. This is hardcoded into a few places,
* so don't change it unless you know what you are doing.
*/
#define TASK_SIZE 0x7fff8000UL
+#endif
#ifdef __KERNEL__
#define STACK_TOP_MAX TASK_SIZE
@@ -23,7 +23,11 @@
*/
#ifdef CONFIG_32BIT
-#define __UA_LIMIT 0x80000000UL
+#ifdef CONFIG_KVM_GUEST
+#define __UA_LIMIT 0x40000000UL
+#else
+#define __UA_LIMIT 0x80000000UL
+#endif
#define __UA_ADDR ".word"
#define __UA_LA "la"
@@ -55,8 +59,13 @@ extern u64 __ua_limit;
* address in this range it's the process's problem, not ours :-)
*/
+#ifdef CONFIG_KVM_GUEST
+#define KERNEL_DS ((mm_segment_t) { 0x80000000UL })
+#define USER_DS ((mm_segment_t) { 0xC0000000UL })
+#else
#define KERNEL_DS ((mm_segment_t) { 0UL })
#define USER_DS ((mm_segment_t) { __UA_LIMIT })
+#endif
#define VERIFY_READ 0
#define VERIFY_WRITE 1
@@ -48,7 +48,11 @@ typedef elf_fpreg_t elf_fpregset_t[ELF_NFPREG];
__res; \
})
+#ifdef CONFIG_KVM_GUEST
+#define TASK32_SIZE 0x3fff8000UL
+#else
#define TASK32_SIZE 0x7fff8000UL
+#endif
#undef ELF_ET_DYN_BASE
#define ELF_ET_DYN_BASE (TASK32_SIZE / 3 * 2)
@@ -118,6 +118,10 @@ int c0_compare_int_usable(void)
unsigned int delta;
unsigned int cnt;
+#ifdef CONFIG_KVM_GUEST
+ return 1;
+#endif
+
/*
* IP7 already pending? Try to clear it by acking the timer.
*/
@@ -1709,7 +1709,12 @@ void __init trap_init(void)
ebase = (unsigned long)
__alloc_bootmem(size, 1 << fls(size), 0);
} else {
- ebase = CKSEG0;
+#ifdef CONFIG_KVM_GUEST
+#define KVM_GUEST_KSEG0 0x40000000
+ ebase = KVM_GUEST_KSEG0;
+#else
+ ebase = CKSEG0;
+#endif
if (cpu_has_mips_r2)
ebase += (read_c0_ebase() & 0x3ffff000);
}
@@ -72,6 +72,19 @@ static unsigned int __init estimate_cpu_frequency(void)
unsigned long flags;
unsigned int start;
+#if defined (CONFIG_KVM_GUEST) && defined (CONFIG_KVM_HOST_FREQ)
+ /*
+ * XXXKYMA: hardwire the CPU frequency to Host Freq/4
+ */
+ count = (CONFIG_KVM_HOST_FREQ * 1000000) >> 3;
+ if ((prid != (PRID_COMP_MIPS | PRID_IMP_20KC)) &&
+ (prid != (PRID_COMP_MIPS | PRID_IMP_25KF)))
+ count *= 2;
+
+ mips_hpt_frequency = count;
+ return count;
+#endif
+
local_irq_save(flags);
/* Start counter exactly on falling edge of update flag */
Both Guest kernel and Guest Userspace execute in UM. The memory map is as follows: Guest User address space: 0x00000000 -> 0x40000000 Guest Kernel Unmapped: 0x40000000 -> 0x60000000 Guest Kernel Mapped: 0x60000000 -> 0x80000000 - Guest Usermode virtual memory is limited to 1GB. Signed-off-by: Sanjay Lal <sanjayl@kymasys.com> --- arch/mips/include/asm/mach-generic/spaces.h | 9 ++++++++- arch/mips/include/asm/processor.h | 5 +++++ arch/mips/include/asm/uaccess.h | 11 ++++++++++- arch/mips/kernel/binfmt_elfo32.c | 4 ++++ arch/mips/kernel/cevt-r4k.c | 4 ++++ arch/mips/kernel/traps.c | 7 ++++++- arch/mips/mti-malta/malta-time.c | 13 +++++++++++++ 7 files changed, 50 insertions(+), 3 deletions(-)