From patchwork Wed Dec 4 16:42:51 2013 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Andrew Jones X-Patchwork-Id: 3283661 Return-Path: X-Original-To: patchwork-kvm@patchwork.kernel.org Delivered-To: patchwork-parsemail@patchwork1.web.kernel.org Received: from mail.kernel.org (mail.kernel.org [198.145.19.201]) by patchwork1.web.kernel.org (Postfix) with ESMTP id E65E89F37C for ; Wed, 4 Dec 2013 16:43:39 +0000 (UTC) Received: from mail.kernel.org (localhost [127.0.0.1]) by mail.kernel.org (Postfix) with ESMTP id B794420265 for ; Wed, 4 Dec 2013 16:43:37 +0000 (UTC) Received: from vger.kernel.org (vger.kernel.org [209.132.180.67]) by mail.kernel.org (Postfix) with ESMTP id 2D9A52045A for ; Wed, 4 Dec 2013 16:43:35 +0000 (UTC) Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932927Ab3LDQn3 (ORCPT ); Wed, 4 Dec 2013 11:43:29 -0500 Received: from mx1.redhat.com ([209.132.183.28]:39417 "EHLO mx1.redhat.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932920Ab3LDQnZ (ORCPT ); Wed, 4 Dec 2013 11:43:25 -0500 Received: from int-mx01.intmail.prod.int.phx2.redhat.com (int-mx01.intmail.prod.int.phx2.redhat.com [10.5.11.11]) by mx1.redhat.com (8.14.4/8.14.4) with ESMTP id rB4Gh9Y4010114 (version=TLSv1/SSLv3 cipher=DHE-RSA-AES256-SHA bits=256 verify=OK); Wed, 4 Dec 2013 11:43:09 -0500 Received: from hawk.usersys.redhat.com.com (dhcp-1-158.brq.redhat.com [10.34.1.158]) by int-mx01.intmail.prod.int.phx2.redhat.com (8.13.8/8.13.8) with ESMTP id rB4Gh3Fv015485; Wed, 4 Dec 2013 11:43:08 -0500 From: Andrew Jones To: kvmarm@lists.cs.columbia.edu, kvm@vger.kernel.org Subject: [PATCH 3/9] clean root dir of all x86-ness Date: Wed, 4 Dec 2013 17:42:51 +0100 Message-Id: <1386175377-23086-4-git-send-email-drjones@redhat.com> In-Reply-To: <1386175377-23086-1-git-send-email-drjones@redhat.com> References: <1386175377-23086-1-git-send-email-drjones@redhat.com> X-Scanned-By: MIMEDefang 2.67 on 10.5.11.11 Sender: kvm-owner@vger.kernel.org Precedence: bulk List-ID: X-Mailing-List: kvm@vger.kernel.org X-Spam-Status: No, score=-6.9 required=5.0 tests=BAYES_00, RCVD_IN_DNSWL_HI, RP_MATCHES_RCVD, UNPARSEABLE_RELAY autolearn=unavailable version=3.3.1 X-Spam-Checker-Version: SpamAssassin 3.3.1 (2010-03-16) on mail.kernel.org X-Virus-Scanned: ClamAV using ClamSMTP Remove all references to x86 from the root dir (except from in configure). Also remove references from the root dir README by moving that documentation to the x86/README, and touch up the READMEs at the same time. Signed-off-by: Andrew Jones --- v2: - tests' images => test images [Christoffer Dall] TODO: - more documentation is still needed, we should add * an overview of the framework * improve the quickstart guide for running the tests * add a quickstart guide for developing tests --- Makefile | 7 ++- README | 55 +++++++++----------- config-i386.mak | 13 ----- config-x86-common.mak | 120 ------------------------------------------- config-x86_64.mak | 14 ----- config/config-i386.mak | 12 +++++ config/config-x86-common.mak | 120 +++++++++++++++++++++++++++++++++++++++++++ config/config-x86_64.mak | 13 +++++ configure | 17 ++++++ docs/testdev.txt | 11 ++++ flat.lds | 21 -------- run_tests.sh | 19 ++++--- testdev.txt | 14 ----- x86-run | 41 --------------- x86/README | 60 +++++++++++++++++----- x86/flat.lds | 21 ++++++++ x86/run | 41 +++++++++++++++ 17 files changed, 316 insertions(+), 283 deletions(-) delete mode 100644 config-i386.mak delete mode 100644 config-x86-common.mak delete mode 100644 config-x86_64.mak create mode 100644 config/config-i386.mak create mode 100644 config/config-x86-common.mak create mode 100644 config/config-x86_64.mak create mode 100644 docs/testdev.txt delete mode 100644 flat.lds delete mode 100644 testdev.txt delete mode 100755 x86-run create mode 100644 x86/flat.lds create mode 100755 x86/run diff --git a/Makefile b/Makefile index 697fc2a766966..7a5ec8e6348bf 100644 --- a/Makefile +++ b/Makefile @@ -17,7 +17,7 @@ cflatobjs := \ lib/string.o #include architecure specific make rules -include config-$(ARCH).mak +include config/config-$(ARCH).mak # cc-option # Usage: OP_CFLAGS+=$(call cc-option, -falign-functions=0, -malign-functions=0) @@ -29,7 +29,6 @@ CFLAGS += $(autodepend-flags) -Wall CFLAGS += $(call cc-option, -fomit-frame-pointer, "") CFLAGS += $(call cc-option, -fno-stack-protector, "") CFLAGS += $(call cc-option, -fno-stack-protector-all, "") -CFLAGS += -I. CXXFLAGS += $(CFLAGS) @@ -44,11 +43,11 @@ $(libcflat): $(cflatobjs) %.o: %.S $(CC) $(CFLAGS) -c -nostdlib -o $@ $< --include .*.d */.*.d */*/.*.d +-include */.*.d */*/.*.d install: mkdir -p $(DESTDIR) install $(tests_and_config) $(DESTDIR) clean: arch_clean - $(RM) *.o *.a .*.d lib/.*.d $(libcflat) $(cflatobjs) + $(RM) lib/.*.d $(libcflat) $(cflatobjs) diff --git a/README b/README index db525e3bbb79d..0174679c05021 100644 --- a/README +++ b/README @@ -1,36 +1,27 @@ This directory contains sources for a kvm test suite. -Tests for x86 architecture are run as kernel images for qemu that supports multiboot format. -Tests uses an infrastructure called from the bios code. The infrastructure initialize the system/cpu's, -switch to long-mode and calls the 'main' function of the individual test. -Tests uses a qemu's virtual test device, named testdev, for services like printing, exiting, query memory size etc. -See file testdev.txt for more details. - -To create the tests' images just type 'make' in this directory. -Tests' images created in .//*.flat - -An example of a test invocation: -Using qemu-kvm: - -qemu-kvm -device testdev,chardev=testlog -chardev file,id=testlog,path=msr.out -serial stdio -kernel ./x86/msr.flat -This invocation runs the msr test case. The test outputs to stdio. - -Using qemu (supported since qemu 1.3): -qemu-system-x86_64 -enable-kvm -device pc-testdev -serial stdio -device isa-debug-exit,iobase=0xf4,iosize=0x4 -kernel ./x86/msr.flat - -Or use a runner script to detect the correct invocation: -./x86-run ./x86/msr.flat -To select a specific qemu binary, specify the QEMU= environment: -QEMU=/tmp/qemu/x86_64-softmmu/qemu-system-x86_64 ./x86-run ./x86/msr.flat - -The exit status of the binary (and the script) is inconsistent: with -qemu-system, after the unittest is done, the exit status of qemu is 1, -different from the 'old style' qemu-kvm, whose exit status in successful -completion is 0. +To create the test images do + ./configure + make +in this directory. Test images are created in .//*.flat + +Then use the runner script to detect the correct invocation and +invoke the test, e.g. + ./x86-run ./x86/msr.flat +or + ./run_tests.sh +to run them all. + +To select a specific qemu binary, specify the QEMU= +environment, e.g. + QEMU=/tmp/qemu/x86_64-softmmu/qemu-system-x86_64 ./x86-run ./x86/msr.flat Directory structure: -.: Makefile and config files for the tests -./lib: general services for the tests -./lib/: architecture dependent services for the tests -./: the sources of the tests and the created objects/images - +.: Makefile and config files for the tests +./config: config files for the tests +./docs: documentation files +./lib: general services for the tests +./lib/: architecture dependent services for the tests +./: the sources of the tests and the created objects/images + +See /README for arch specific documentation. diff --git a/config-i386.mak b/config-i386.mak deleted file mode 100644 index de52f3d53cff8..0000000000000 --- a/config-i386.mak +++ /dev/null @@ -1,13 +0,0 @@ -TEST_DIR=x86 -cstart.o = $(TEST_DIR)/cstart.o -bits = 32 -ldarch = elf32-i386 -CFLAGS += -D__i386__ -CFLAGS += -I $(KERNELDIR)/include - -tests = $(TEST_DIR)/taskswitch.flat $(TEST_DIR)/taskswitch2.flat - -include config-x86-common.mak - -$(TEST_DIR)/taskswitch.elf: $(cstart.o) $(TEST_DIR)/taskswitch.o -$(TEST_DIR)/taskswitch2.elf: $(cstart.o) $(TEST_DIR)/taskswitch2.o diff --git a/config-x86-common.mak b/config-x86-common.mak deleted file mode 100644 index 7e481192a0737..0000000000000 --- a/config-x86-common.mak +++ /dev/null @@ -1,120 +0,0 @@ -#This is a make file with common rules for both x86 & x86-64 - -all: test_cases - -cflatobjs += lib/x86/io.o -cflatobjs += lib/x86/smp.o -cflatobjs += lib/x86/vm.o -cflatobjs += lib/x86/fwcfg.o -cflatobjs += lib/x86/apic.o -cflatobjs += lib/x86/atomic.o -cflatobjs += lib/x86/desc.o -cflatobjs += lib/x86/isr.o -cflatobjs += lib/x86/pci.o - -$(libcflat): LDFLAGS += -nostdlib -$(libcflat): CFLAGS += -ffreestanding -I lib - -CFLAGS += -m$(bits) -CFLAGS += -O1 - -libgcc := $(shell $(CC) -m$(bits) --print-libgcc-file-name) - -FLATLIBS = lib/libcflat.a $(libgcc) -%.elf: %.o $(FLATLIBS) flat.lds - $(CC) $(CFLAGS) -nostdlib -o $@ -Wl,-T,flat.lds \ - $(filter %.o, $^) $(FLATLIBS) - -%.flat: %.elf - $(OBJCOPY) -O elf32-i386 $^ $@ - -tests-common = $(TEST_DIR)/vmexit.flat $(TEST_DIR)/tsc.flat \ - $(TEST_DIR)/smptest.flat $(TEST_DIR)/port80.flat \ - $(TEST_DIR)/realmode.flat $(TEST_DIR)/msr.flat \ - $(TEST_DIR)/hypercall.flat $(TEST_DIR)/sieve.flat \ - $(TEST_DIR)/kvmclock_test.flat $(TEST_DIR)/eventinj.flat \ - $(TEST_DIR)/s3.flat $(TEST_DIR)/pmu.flat \ - $(TEST_DIR)/tsc_adjust.flat $(TEST_DIR)/asyncpf.flat \ - $(TEST_DIR)/init.flat - -ifdef API -tests-common += api/api-sample -tests-common += api/dirty-log -tests-common += api/dirty-log-perf -endif - -tests_and_config = $(TEST_DIR)/*.flat $(TEST_DIR)/unittests.cfg - -test_cases: $(tests-common) $(tests) - -$(TEST_DIR)/%.o: CFLAGS += -std=gnu99 -ffreestanding -I lib -I lib/x86 - -$(TEST_DIR)/access.elf: $(cstart.o) $(TEST_DIR)/access.o - -$(TEST_DIR)/hypercall.elf: $(cstart.o) $(TEST_DIR)/hypercall.o - -$(TEST_DIR)/sieve.elf: $(cstart.o) $(TEST_DIR)/sieve.o - -$(TEST_DIR)/vmexit.elf: $(cstart.o) $(TEST_DIR)/vmexit.o - -$(TEST_DIR)/smptest.elf: $(cstart.o) $(TEST_DIR)/smptest.o - -$(TEST_DIR)/emulator.elf: $(cstart.o) $(TEST_DIR)/emulator.o - -$(TEST_DIR)/port80.elf: $(cstart.o) $(TEST_DIR)/port80.o - -$(TEST_DIR)/tsc.elf: $(cstart.o) $(TEST_DIR)/tsc.o - -$(TEST_DIR)/tsc_adjust.elf: $(cstart.o) $(TEST_DIR)/tsc_adjust.o - -$(TEST_DIR)/apic.elf: $(cstart.o) $(TEST_DIR)/apic.o - -$(TEST_DIR)/init.elf: $(cstart.o) $(TEST_DIR)/init.o - -$(TEST_DIR)/realmode.elf: $(TEST_DIR)/realmode.o - $(CC) -m32 -nostdlib -o $@ -Wl,-T,$(TEST_DIR)/realmode.lds $^ - -$(TEST_DIR)/realmode.o: bits = 32 - -$(TEST_DIR)/msr.elf: $(cstart.o) $(TEST_DIR)/msr.o - -$(TEST_DIR)/idt_test.elf: $(cstart.o) $(TEST_DIR)/idt_test.o - -$(TEST_DIR)/xsave.elf: $(cstart.o) $(TEST_DIR)/xsave.o - -$(TEST_DIR)/rmap_chain.elf: $(cstart.o) $(TEST_DIR)/rmap_chain.o - -$(TEST_DIR)/svm.elf: $(cstart.o) - -$(TEST_DIR)/kvmclock_test.elf: $(cstart.o) $(TEST_DIR)/kvmclock.o \ - $(TEST_DIR)/kvmclock_test.o - -$(TEST_DIR)/eventinj.elf: $(cstart.o) $(TEST_DIR)/eventinj.o - -$(TEST_DIR)/s3.elf: $(cstart.o) $(TEST_DIR)/s3.o - -$(TEST_DIR)/pmu.elf: $(cstart.o) $(TEST_DIR)/pmu.o - -$(TEST_DIR)/asyncpf.elf: $(cstart.o) $(TEST_DIR)/asyncpf.o - -$(TEST_DIR)/pcid.elf: $(cstart.o) $(TEST_DIR)/pcid.o - -$(TEST_DIR)/vmx.elf: $(cstart.o) $(TEST_DIR)/vmx.o $(TEST_DIR)/vmx_tests.o - -arch_clean: - $(RM) $(TEST_DIR)/*.o $(TEST_DIR)/*.flat $(TEST_DIR)/*.elf \ - $(TEST_DIR)/.*.d lib/x86/.*.d - -api/%.o: CFLAGS += -m32 - -api/%: LDLIBS += -lstdc++ -lboost_thread-mt -lpthread -lrt -api/%: LDFLAGS += -m32 - -api/libapi.a: api/kvmxx.o api/identity.o api/exception.o api/memmap.o - $(AR) rcs $@ $^ - -api/api-sample: api/api-sample.o api/libapi.a - -api/dirty-log: api/dirty-log.o api/libapi.a - -api/dirty-log-perf: api/dirty-log-perf.o api/libapi.a diff --git a/config-x86_64.mak b/config-x86_64.mak deleted file mode 100644 index bb8ee89713abd..0000000000000 --- a/config-x86_64.mak +++ /dev/null @@ -1,14 +0,0 @@ -TEST_DIR=x86 -cstart.o = $(TEST_DIR)/cstart64.o -bits = 64 -ldarch = elf64-x86-64 -CFLAGS += -D__x86_64__ - -tests = $(TEST_DIR)/access.flat $(TEST_DIR)/apic.flat \ - $(TEST_DIR)/emulator.flat $(TEST_DIR)/idt_test.flat \ - $(TEST_DIR)/xsave.flat $(TEST_DIR)/rmap_chain.flat \ - $(TEST_DIR)/pcid.flat -tests += $(TEST_DIR)/svm.flat -tests += $(TEST_DIR)/vmx.flat - -include config-x86-common.mak diff --git a/config/config-i386.mak b/config/config-i386.mak new file mode 100644 index 0000000000000..82fed0f5a48b0 --- /dev/null +++ b/config/config-i386.mak @@ -0,0 +1,12 @@ +cstart.o = $(TEST_DIR)/cstart.o +bits = 32 +ldarch = elf32-i386 +CFLAGS += -D__i386__ +CFLAGS += -I $(KERNELDIR)/include + +tests = $(TEST_DIR)/taskswitch.flat $(TEST_DIR)/taskswitch2.flat + +include config/config-x86-common.mak + +$(TEST_DIR)/taskswitch.elf: $(cstart.o) $(TEST_DIR)/taskswitch.o +$(TEST_DIR)/taskswitch2.elf: $(cstart.o) $(TEST_DIR)/taskswitch2.o diff --git a/config/config-x86-common.mak b/config/config-x86-common.mak new file mode 100644 index 0000000000000..917cbbf801a65 --- /dev/null +++ b/config/config-x86-common.mak @@ -0,0 +1,120 @@ +#This is a make file with common rules for both x86 & x86-64 + +all: test_cases + +cflatobjs += lib/x86/io.o +cflatobjs += lib/x86/smp.o +cflatobjs += lib/x86/vm.o +cflatobjs += lib/x86/fwcfg.o +cflatobjs += lib/x86/apic.o +cflatobjs += lib/x86/atomic.o +cflatobjs += lib/x86/desc.o +cflatobjs += lib/x86/isr.o +cflatobjs += lib/x86/pci.o + +$(libcflat): LDFLAGS += -nostdlib +$(libcflat): CFLAGS += -ffreestanding -I lib + +CFLAGS += -m$(bits) +CFLAGS += -O1 + +libgcc := $(shell $(CC) -m$(bits) --print-libgcc-file-name) + +FLATLIBS = lib/libcflat.a $(libgcc) +%.elf: %.o $(FLATLIBS) x86/flat.lds + $(CC) $(CFLAGS) -nostdlib -o $@ -Wl,-T,x86/flat.lds \ + $(filter %.o, $^) $(FLATLIBS) + +%.flat: %.elf + $(OBJCOPY) -O elf32-i386 $^ $@ + +tests-common = $(TEST_DIR)/vmexit.flat $(TEST_DIR)/tsc.flat \ + $(TEST_DIR)/smptest.flat $(TEST_DIR)/port80.flat \ + $(TEST_DIR)/realmode.flat $(TEST_DIR)/msr.flat \ + $(TEST_DIR)/hypercall.flat $(TEST_DIR)/sieve.flat \ + $(TEST_DIR)/kvmclock_test.flat $(TEST_DIR)/eventinj.flat \ + $(TEST_DIR)/s3.flat $(TEST_DIR)/pmu.flat \ + $(TEST_DIR)/tsc_adjust.flat $(TEST_DIR)/asyncpf.flat \ + $(TEST_DIR)/init.flat + +ifdef API +tests-common += api/api-sample +tests-common += api/dirty-log +tests-common += api/dirty-log-perf +endif + +tests_and_config = $(TEST_DIR)/*.flat $(TEST_DIR)/unittests.cfg + +test_cases: $(tests-common) $(tests) + +$(TEST_DIR)/%.o: CFLAGS += -std=gnu99 -ffreestanding -I lib -I lib/x86 + +$(TEST_DIR)/access.elf: $(cstart.o) $(TEST_DIR)/access.o + +$(TEST_DIR)/hypercall.elf: $(cstart.o) $(TEST_DIR)/hypercall.o + +$(TEST_DIR)/sieve.elf: $(cstart.o) $(TEST_DIR)/sieve.o + +$(TEST_DIR)/vmexit.elf: $(cstart.o) $(TEST_DIR)/vmexit.o + +$(TEST_DIR)/smptest.elf: $(cstart.o) $(TEST_DIR)/smptest.o + +$(TEST_DIR)/emulator.elf: $(cstart.o) $(TEST_DIR)/emulator.o + +$(TEST_DIR)/port80.elf: $(cstart.o) $(TEST_DIR)/port80.o + +$(TEST_DIR)/tsc.elf: $(cstart.o) $(TEST_DIR)/tsc.o + +$(TEST_DIR)/tsc_adjust.elf: $(cstart.o) $(TEST_DIR)/tsc_adjust.o + +$(TEST_DIR)/apic.elf: $(cstart.o) $(TEST_DIR)/apic.o + +$(TEST_DIR)/init.elf: $(cstart.o) $(TEST_DIR)/init.o + +$(TEST_DIR)/realmode.elf: $(TEST_DIR)/realmode.o + $(CC) -m32 -nostdlib -o $@ -Wl,-T,$(TEST_DIR)/realmode.lds $^ + +$(TEST_DIR)/realmode.o: bits = 32 + +$(TEST_DIR)/msr.elf: $(cstart.o) $(TEST_DIR)/msr.o + +$(TEST_DIR)/idt_test.elf: $(cstart.o) $(TEST_DIR)/idt_test.o + +$(TEST_DIR)/xsave.elf: $(cstart.o) $(TEST_DIR)/xsave.o + +$(TEST_DIR)/rmap_chain.elf: $(cstart.o) $(TEST_DIR)/rmap_chain.o + +$(TEST_DIR)/svm.elf: $(cstart.o) + +$(TEST_DIR)/kvmclock_test.elf: $(cstart.o) $(TEST_DIR)/kvmclock.o \ + $(TEST_DIR)/kvmclock_test.o + +$(TEST_DIR)/eventinj.elf: $(cstart.o) $(TEST_DIR)/eventinj.o + +$(TEST_DIR)/s3.elf: $(cstart.o) $(TEST_DIR)/s3.o + +$(TEST_DIR)/pmu.elf: $(cstart.o) $(TEST_DIR)/pmu.o + +$(TEST_DIR)/asyncpf.elf: $(cstart.o) $(TEST_DIR)/asyncpf.o + +$(TEST_DIR)/pcid.elf: $(cstart.o) $(TEST_DIR)/pcid.o + +$(TEST_DIR)/vmx.elf: $(cstart.o) $(TEST_DIR)/vmx.o $(TEST_DIR)/vmx_tests.o + +arch_clean: + $(RM) $(TEST_DIR)/*.o $(TEST_DIR)/*.flat $(TEST_DIR)/*.elf \ + $(TEST_DIR)/.*.d lib/x86/.*.d + +api/%.o: CFLAGS += -m32 + +api/%: LDLIBS += -lstdc++ -lboost_thread-mt -lpthread -lrt +api/%: LDFLAGS += -m32 + +api/libapi.a: api/kvmxx.o api/identity.o api/exception.o api/memmap.o + $(AR) rcs $@ $^ + +api/api-sample: api/api-sample.o api/libapi.a + +api/dirty-log: api/dirty-log.o api/libapi.a + +api/dirty-log-perf: api/dirty-log-perf.o api/libapi.a diff --git a/config/config-x86_64.mak b/config/config-x86_64.mak new file mode 100644 index 0000000000000..f089b05a178c3 --- /dev/null +++ b/config/config-x86_64.mak @@ -0,0 +1,13 @@ +cstart.o = $(TEST_DIR)/cstart64.o +bits = 64 +ldarch = elf64-x86-64 +CFLAGS += -D__x86_64__ + +tests = $(TEST_DIR)/access.flat $(TEST_DIR)/apic.flat \ + $(TEST_DIR)/emulator.flat $(TEST_DIR)/idt_test.flat \ + $(TEST_DIR)/xsave.flat $(TEST_DIR)/rmap_chain.flat \ + $(TEST_DIR)/pcid.flat +tests += $(TEST_DIR)/svm.flat +tests += $(TEST_DIR)/vmx.flat + +include config/config-x86-common.mak diff --git a/configure b/configure index d0c62e24dd1d2..6cfc64943f6e6 100755 --- a/configure +++ b/configure @@ -15,6 +15,7 @@ usage() { Usage: $0 [options] Options include: + --test-dir=DIR the main directory for tests ($arch) --arch=ARCH architecture to compile for ($arch) --cross-prefix=PREFIX cross compiler prefix --cc=CC c compiler to use ($cc) @@ -33,6 +34,9 @@ while [[ "$1" = -* ]]; do opt="${opt%%=*}" fi case "$opt" in + --test-dir) + testdir="$arg" + ;; --prefix) prefix="$arg" ;; @@ -62,6 +66,18 @@ while [[ "$1" = -* ]]; do ;; esac done +if [ -z "$testdir" -a \( "$arch" = "i386" -o "$arch" = "x86_64" \) ]; then + testdir=x86 +elif [ -z "$testdir" ]; then + testdir=$arch +fi +if [ ! -d $testdir ]; then + echo "$testdir does not exist!" + exit 1 +fi +if [ -f $testdir/run ]; then + ln -fs $testdir/run $testdir-run +fi # check for dependent 32 bit libraries cat << EOF > lib_test.c @@ -89,4 +105,5 @@ LD=$cross_prefix$ld OBJCOPY=$cross_prefix$objcopy AR=$cross_prefix$ar API=$api +TEST_DIR=$testdir EOF diff --git a/docs/testdev.txt b/docs/testdev.txt new file mode 100644 index 0000000000000..854b5c774b60c --- /dev/null +++ b/docs/testdev.txt @@ -0,0 +1,11 @@ +This file describes the virtual device of qemu for supporting this test suite. + +Services supplied by the testdev device: + +serial output: write only, on io port 0xf1 +exit process: write only, on io port 0xf4, value used as exit code +ram size: read-only, on io port 0xd1, 4 bytes' size +irq line setting: write only, on io ports 0x2000 - 0x2018, value to set/clear +simple io: read/write, on io port 0xe0, 1/2/4 bytes + +Test device used a char device for actual output diff --git a/flat.lds b/flat.lds deleted file mode 100644 index a278b56c9a4e3..0000000000000 --- a/flat.lds +++ /dev/null @@ -1,21 +0,0 @@ -SECTIONS -{ - . = 4M + SIZEOF_HEADERS; - stext = .; - .text : { *(.init) *(.text) *(.text.*) } - . = ALIGN(4K); - .data : { - *(.data) - exception_table_start = .; - *(.data.ex) - exception_table_end = .; - } - . = ALIGN(16); - .rodata : { *(.rodata) } - . = ALIGN(16); - .bss : { *(.bss) } - . = ALIGN(4K); - edata = .; -} - -ENTRY(start) diff --git a/run_tests.sh b/run_tests.sh index f373c533b75b2..400c62458ae18 100755 --- a/run_tests.sh +++ b/run_tests.sh @@ -1,8 +1,10 @@ #!/bin/bash -testroot=x86 -config=$testroot/unittests.cfg -qemu=${qemu:-qemu-system-x86_64} +# As it happens, config.mak is valid shell script code, too :-) +source config.mak + +config=$TEST_DIR/unittests.cfg +qemu=${QEMU:-qemu-system-$ARCH} verbose=0 function run() @@ -27,7 +29,7 @@ function run() return fi - cmdline="./x86-run $kernel -smp $smp $opts" + cmdline="./$TEST_DIR-run $kernel -smp $smp $opts" if [ $verbose != 0 ]; then echo $cmdline fi @@ -65,7 +67,7 @@ function run_all() groups="" arch="" elif [[ $line =~ ^file\ *=\ *(.*)$ ]]; then - kernel=$testroot/${BASH_REMATCH[1]} + kernel=$TEST_DIR/${BASH_REMATCH[1]} elif [[ $line =~ ^smp\ *=\ *(.*)$ ]]; then smp=${BASH_REMATCH[1]} elif [[ $line =~ ^extra_params\ *=\ *(.*)$ ]]; then @@ -92,15 +94,12 @@ Usage: $0 [-g group] [-h] [-v] -h: Output this help text -v: Enables verbose mode -Set the environment variable QEMU=/path/to/qemu-system-x86_64 to allow the -internally used x86-run to pick up the right qemu binary. +Set the environment variable QEMU=/path/to/qemu-system-ARCH to allow the +internally used ARCH-run to pick up the right qemu binary. EOF } -# As it happens, config.mak is valid shell script code, too :-) -source config.mak - echo > test.log while getopts "g:hv" opt; do case $opt in diff --git a/testdev.txt b/testdev.txt deleted file mode 100644 index ac436efadb633..0000000000000 --- a/testdev.txt +++ /dev/null @@ -1,14 +0,0 @@ -This file describes the virtual device of qemu for supporting this test suite. - -Services supplied by the testdev device: - -serial output: write only, on io port 0xf1 -exit process: write only, on io port 0xf4, value used as exit code -ram size: read-only, on io port 0xd1, 4 bytes' size -irq line setting: write only, on io ports 0x2000 - 0x2018, value to set/clear -simple io: read/write, on io port 0xe0, 1/2/4 bytes - -Test device used a char device for actual output - - - diff --git a/x86-run b/x86-run deleted file mode 100755 index 646c5770ed03f..0000000000000 --- a/x86-run +++ /dev/null @@ -1,41 +0,0 @@ -#!/bin/bash - -qemukvm="${QEMU:-qemu-kvm}" -qemusystem="${QEMU:-qemu-system-x86_64}" -if - ${qemukvm} -device '?' 2>&1 | grep -F -e \"testdev\" -e \"pc-testdev\" > /dev/null; -then - qemu="${qemukvm}" -else - if - ${qemusystem} -device '?' 2>&1 | grep -F -e \"testdev\" -e \"pc-testdev\" > /dev/null; - then - qemu="${qemusystem}" - else - echo QEMU binary ${QEMU} has no support for test device. Exiting. - exit 2 - fi -fi - -if - ${qemu} -device '?' 2>&1 | grep -F "pci-testdev" > /dev/null; -then - pci_testdev="-device pci-testdev" -else - pci_testdev="" -fi - -if - ${qemu} -device '?' 2>&1 | grep -F "pc-testdev" > /dev/null; -then - pc_testdev="-device pc-testdev -device isa-debug-exit,iobase=0xf4,iosize=0x4" -else - pc_testdev="-device testdev,chardev=testlog -chardev file,id=testlog,path=msr.out" -fi - -command="${qemu} -enable-kvm $pc_testdev -display none -serial stdio $pci_testdev -kernel" -echo ${command} "$@" -${command} "$@" -ret=$? -echo Return value from qemu: $ret -exit $ret diff --git a/x86/README b/x86/README index d644abdf31708..2f4baa46c6ed1 100644 --- a/x86/README +++ b/x86/README @@ -1,16 +1,48 @@ + +Tests for x86 architecture are run as kernel images for qemu that supports +multiboot format. Tests uses an infrastructure called from the bios code. +The infrastructure initialize the system/cpu's, switch to long-mode and calls +the 'main' function of the individual test. Tests uses a qemu's virtual test +device, named testdev, for services like printing, exiting, query memory +size etc. See file docs/testdev.txt for more details. + +An example of a test invocation: +Using qemu-kvm: + +qemu-kvm -device testdev,chardev=testlog \ + -chardev file,id=testlog,path=msr.out \ + -serial stdio -kernel ./x86/msr.flat +This invocation runs the msr test case. The test outputs to stdio. + +Using qemu (supported since qemu 1.3): +qemu-system-x86_64 -enable-kvm -device pc-testdev -serial stdio \ + -device isa-debug-exit,iobase=0xf4,iosize=0x4 \ + -kernel ./x86/msr.flat + Tests in this directory and what they do: -access: lots of page table related access (pte/pde) (read/write) -apic: enable x2apic, self ipi, ioapic intr, ioapic simultaneous -emulator: move to/from regs, cmps, push, pop, to/from cr8, smsw and lmsw -hypercall: intel and amd hypercall insn -msr: write to msr (only KERNEL_GS_BASE for now) -port80: lots of out to port 80 -realmode: goes back to realmode, shld, push/pop, mov immediate, cmp immediate, add immediate, - io, eflags instructions (clc, cli, etc.), jcc short, jcc near, call, long jmp, xchg -sieve: heavy memory access with no paging and with paging static and with paging vmalloc'ed -smptest: run smp_id() on every cpu and compares return value to number -tsc: write to tsc(0) and write to tsc(100000000000) and read it back -vmexit: long loops for each: cpuid, vmcall, mov_from_cr8, mov_to_cr8, inl_pmtimer, ipi, ipi+halt -kvmclock_test: test of wallclock, monotonic cycle and performance of kvmclock -pcid: basic functionality test of PCID/INVPCID feature \ No newline at end of file + access: lots of page table related access (pte/pde) (read/write) + apic: enable x2apic, self ipi, ioapic intr, ioapic simultaneous + emulator: move to/from regs, cmps, push, pop, to/from cr8, smsw and lmsw + hypercall: intel and amd hypercall insn + msr: write to msr (only KERNEL_GS_BASE for now) + port80: lots of out to port 80 + realmode: goes back to realmode, shld, push/pop, mov immediate, + cmp immediate, add immediate, io, eflags instructions + (clc, cli, etc.), jcc short, jcc near, call, long jmp, xchg + sieve: heavy memory access with no paging and with paging static and + with paging vmalloc'ed + smptest: run smp_id() on every cpu and compares return value to number + tsc: write to tsc(0) and write to tsc(100000000000) and read it back + vmexit: long loops for each: cpuid, vmcall, mov_from_cr8, mov_to_cr8, + inl_pmtimer, ipi, ipi+halt + kvmclock_test: test of wallclock, monotonic cycle and performance of kvmclock + pcid: basic functionality test of PCID/INVPCID featureThis directory + contains sources for a kvm test suite. + +Legacy notes: + + The exit status of the binary (and the script) is inconsistent: with + qemu-system, after the unittest is done, the exit status of qemu is 1, + different from the 'old style' qemu-kvm, whose exit status in successful + completion is 0. diff --git a/x86/flat.lds b/x86/flat.lds new file mode 100644 index 0000000000000..a278b56c9a4e3 --- /dev/null +++ b/x86/flat.lds @@ -0,0 +1,21 @@ +SECTIONS +{ + . = 4M + SIZEOF_HEADERS; + stext = .; + .text : { *(.init) *(.text) *(.text.*) } + . = ALIGN(4K); + .data : { + *(.data) + exception_table_start = .; + *(.data.ex) + exception_table_end = .; + } + . = ALIGN(16); + .rodata : { *(.rodata) } + . = ALIGN(16); + .bss : { *(.bss) } + . = ALIGN(4K); + edata = .; +} + +ENTRY(start) diff --git a/x86/run b/x86/run new file mode 100755 index 0000000000000..646c5770ed03f --- /dev/null +++ b/x86/run @@ -0,0 +1,41 @@ +#!/bin/bash + +qemukvm="${QEMU:-qemu-kvm}" +qemusystem="${QEMU:-qemu-system-x86_64}" +if + ${qemukvm} -device '?' 2>&1 | grep -F -e \"testdev\" -e \"pc-testdev\" > /dev/null; +then + qemu="${qemukvm}" +else + if + ${qemusystem} -device '?' 2>&1 | grep -F -e \"testdev\" -e \"pc-testdev\" > /dev/null; + then + qemu="${qemusystem}" + else + echo QEMU binary ${QEMU} has no support for test device. Exiting. + exit 2 + fi +fi + +if + ${qemu} -device '?' 2>&1 | grep -F "pci-testdev" > /dev/null; +then + pci_testdev="-device pci-testdev" +else + pci_testdev="" +fi + +if + ${qemu} -device '?' 2>&1 | grep -F "pc-testdev" > /dev/null; +then + pc_testdev="-device pc-testdev -device isa-debug-exit,iobase=0xf4,iosize=0x4" +else + pc_testdev="-device testdev,chardev=testlog -chardev file,id=testlog,path=msr.out" +fi + +command="${qemu} -enable-kvm $pc_testdev -display none -serial stdio $pci_testdev -kernel" +echo ${command} "$@" +${command} "$@" +ret=$? +echo Return value from qemu: $ret +exit $ret