@@ -94,7 +94,7 @@ struct kvmppc_host_state {
unsigned long xics_phys;
u32 saved_xirr;
u64 dabr;
- u64 host_mmcr[3];
+ u64 host_mmcr[7]; /* MMCR 0,1,A, SIAR, SDAR, MMCR2, SIER */
u32 host_pmc[8];
u64 host_purr;
u64 host_spurr;
@@ -71,6 +71,14 @@ END_FTR_SECTION_IFCLR(CPU_FTR_ARCH_207S)
mtmsrd r10,1
/* Save host PMU registers */
+BEGIN_FTR_SECTION
+ /* Work around P8 PMAE bug */
+ li r3, -1
+ clrrdi r3, r3, 10
+ mfspr r8, SPRN_MMCR2
+ mtspr SPRN_MMCR2, r3 /* freeze all counters using MMCR2 */
+ isync
+END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
li r3, 1
sldi r3, r3, 31 /* MMCR0_FC (freeze counters) bit */
mfspr r7, SPRN_MMCR0 /* save MMCR0 */
@@ -87,9 +95,18 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_206)
cmpwi r5, 0
beq 31f /* skip if not */
mfspr r5, SPRN_MMCR1
+ mfspr r9, SPRN_SIAR
+ mfspr r10, SPRN_SDAR
std r7, HSTATE_MMCR(r13)
std r5, HSTATE_MMCR + 8(r13)
std r6, HSTATE_MMCR + 16(r13)
+ std r9, HSTATE_MMCR + 24(r13)
+ std r10, HSTATE_MMCR + 32(r13)
+BEGIN_FTR_SECTION
+ mfspr r9, SPRN_SIER
+ std r8, HSTATE_MMCR + 40(r13)
+ std r9, HSTATE_MMCR + 48(r13)
+END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
mfspr r3, SPRN_PMC1
mfspr r5, SPRN_PMC2
mfspr r6, SPRN_PMC3
@@ -110,6 +127,11 @@ BEGIN_FTR_SECTION
stw r10, HSTATE_PMC + 24(r13)
stw r11, HSTATE_PMC + 28(r13)
END_FTR_SECTION_IFSET(CPU_FTR_ARCH_201)
+BEGIN_FTR_SECTION
+ mfspr r9, SPRN_SIER
+ std r8, HSTATE_MMCR + 40(r13)
+ std r9, HSTATE_MMCR + 48(r13)
+END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
31:
/*
@@ -109,8 +109,18 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_201)
ld r3, HSTATE_MMCR(r13)
ld r4, HSTATE_MMCR + 8(r13)
ld r5, HSTATE_MMCR + 16(r13)
+ ld r6, HSTATE_MMCR + 24(r13)
+ ld r7, HSTATE_MMCR + 32(r13)
mtspr SPRN_MMCR1, r4
mtspr SPRN_MMCRA, r5
+ mtspr SPRN_SIAR, r6
+ mtspr SPRN_SDAR, r7
+BEGIN_FTR_SECTION
+ ld r8, HSTATE_MMCR + 40(r13)
+ ld r9, HSTATE_MMCR + 48(r13)
+ mtspr SPRN_MMCR2, r8
+ mtspr SPRN_SIER, r9
+END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S)
mtspr SPRN_MMCR0, r3
isync
23:
Currently we save the host PMU configuration, counter values, etc., when entering a guest, and restore it on return from the guest. (We have to do this because the guest has control of the PMU while it is executing.) However, we missed saving/restoring the SIAR and SDAR registers, as well as the registers which are new on POWER8, namely SIER and MMCR2. This adds code to save the values of these registers when entering the guest and restore them on exit. This also works around the bug in POWER8 where setting PMAE with a counter already negative doesn't generate an interrupt. Signed-off-by: Paul Mackerras <paulus@samba.org> --- arch/powerpc/include/asm/kvm_book3s_asm.h | 2 +- arch/powerpc/kvm/book3s_hv_interrupts.S | 22 ++++++++++++++++++++++ arch/powerpc/kvm/book3s_hv_rmhandlers.S | 10 ++++++++++ 3 files changed, 33 insertions(+), 1 deletion(-)