[03/23] userfaultfd: uAPI

Commit Message

Andrea Arcangeli May 14, 2015, 5:31 p.m. UTC

Defines the uAPI of the userfaultfd, notably the ioctl numbers and protocol.

Signed-off-by: Andrea Arcangeli <[e-mail]>
---
 Documentation/ioctl/ioctl-number.txt |  1 +
 include/uapi/linux/Kbuild            |  1 +
 include/uapi/linux/userfaultfd.h     | 81 ++++++++++++++++++++++++++++++++++++
 3 files changed, 83 insertions(+)
 create mode 100644 include/uapi/linux/userfaultfd.h

--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to [e-mail]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch

diff --git a/Documentation/ioctl/ioctl-number.txt b/Documentation/ioctl/ioctl-number.txt
index ec7c81b..ed950ad 100644
--- a/Documentation/ioctl/ioctl-number.txt
+++ b/Documentation/ioctl/ioctl-number.txt
@@ -302,6 +302,7 @@  Code  Seq#(hex)	Include File		Comments
 0xA3	80-8F	Port ACL		in development:
 					<mailto:[e-mail]>
 0xA3	90-9F	linux/dtlk.h
+0xAA	00-3F	linux/uapi/linux/userfaultfd.h
 0xAB	00-1F	linux/nbd.h
 0xAC	00-1F	linux/raw.h
 0xAD	00	Netfilter device	in development:
diff --git a/include/uapi/linux/Kbuild b/include/uapi/linux/Kbuild
index 4842a98..47547ea 100644
--- a/include/uapi/linux/Kbuild
+++ b/include/uapi/linux/Kbuild
@@ -452,3 +452,4 @@  header-y += xfrm.h
 header-y += xilinx-v4l2-controls.h
 header-y += zorro.h
 header-y += zorro_ids.h
+header-y += userfaultfd.h
diff --git a/include/uapi/linux/userfaultfd.h b/include/uapi/linux/userfaultfd.h
new file mode 100644
index 0000000..9a8cd56
--- /dev/null
+++ b/include/uapi/linux/userfaultfd.h
@@ -0,0 +1,81 @@ 
+/*
+ *  include/linux/userfaultfd.h
+ *
+ *  Copyright (C) 2007  Davide Libenzi <[e-mail]>
+ *  Copyright (C) 2015  Red Hat, Inc.
+ *
+ */
+
+#ifndef _LINUX_USERFAULTFD_H
+#define _LINUX_USERFAULTFD_H
+
+#define UFFD_API ((__u64)0xAA)
+/* FIXME: add "|UFFD_BIT_WP" to UFFD_API_BITS after implementing it */
+#define UFFD_API_BITS (UFFD_BIT_WRITE)
+#define UFFD_API_IOCTLS				\
+	((__u64)1 << _UFFDIO_REGISTER |		\
+	 (__u64)1 << _UFFDIO_UNREGISTER |	\
+	 (__u64)1 << _UFFDIO_API)
+#define UFFD_API_RANGE_IOCTLS			\
+	((__u64)1 << _UFFDIO_WAKE)
+
+/*
+ * Valid ioctl command number range with this API is from 0x00 to
+ * 0x3F.  UFFDIO_API is the fixed number, everything else can be
+ * changed by implementing a different UFFD_API. If sticking to the
+ * same UFFD_API more ioctl can be added and userland will be aware of
+ * which ioctl the running kernel implements through the ioctl command
+ * bitmask written by the UFFDIO_API.
+ */
+#define _UFFDIO_REGISTER		(0x00)
+#define _UFFDIO_UNREGISTER		(0x01)
+#define _UFFDIO_WAKE			(0x02)
+#define _UFFDIO_API			(0x3F)
+
+/* userfaultfd ioctl ids */
+#define UFFDIO 0xAA
+#define UFFDIO_API		_IOWR(UFFDIO, _UFFDIO_API,	\
+				      struct uffdio_api)
+#define UFFDIO_REGISTER		_IOWR(UFFDIO, _UFFDIO_REGISTER, \
+				      struct uffdio_register)
+#define UFFDIO_UNREGISTER	_IOR(UFFDIO, _UFFDIO_UNREGISTER,	\
+				     struct uffdio_range)
+#define UFFDIO_WAKE		_IOR(UFFDIO, _UFFDIO_WAKE,	\
+				     struct uffdio_range)
+
+/*
+ * Valid bits below PAGE_SHIFT in the userfault address read through
+ * the read() syscall.
+ */
+#define UFFD_BIT_WRITE	(1<<0)	/* this was a write fault, MISSING or WP */
+#define UFFD_BIT_WP	(1<<1)	/* handle_userfault() reason VM_UFFD_WP */
+#define UFFD_BITS	2	/* two above bits used for UFFD_BIT_* mask */
+
+struct uffdio_api {
+	/* userland asks for an API number */
+	__u64 api;
+
+	/* kernel answers below with the available features for the API */
+	__u64 bits;
+	__u64 ioctls;
+};
+
+struct uffdio_range {
+	__u64 start;
+	__u64 len;
+};
+
+struct uffdio_register {
+	struct uffdio_range range;
+#define UFFDIO_REGISTER_MODE_MISSING	((__u64)1<<0)
+#define UFFDIO_REGISTER_MODE_WP		((__u64)1<<1)
+	__u64 mode;
+
+	/*
+	 * kernel answers which ioctl commands are available for the
+	 * range, keep at the end as the last 8 bytes aren't read.
+	 */
+	__u64 ioctls;
+};
+
+#endif /* _LINUX_USERFAULTFD_H */