diff mbox

vgaarb: fix signal handling in vga_get()

Message ID 1448849851-26061-1-git-send-email-kirill@shutemov.name (mailing list archive)
State New, archived
Headers show

Commit Message

Kirill A. Shutemov Nov. 30, 2015, 2:17 a.m. UTC
There are few defects in vga_get() related to signal hadning:

  - we shouldn't check for pending signals for TASK_UNINTERRUPTIBLE
    case;

  - if we found pending signal we must remove ourself from wait queue
    and change task state back to running;

  - -ERESTARTSYS is more appropriate, I guess.

Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>
---

Alex, I try to get KVM with VGA passthrough working properly. I have i915
(HD 4600) on the host and GTX 580 for the guest. The guest GPU is not
capabale of EFI, so I have to use x-vga=on. It's kinda work with your
patch for i915.enable_hd_vgaarb=1. But guest refuse to initialize the GPU
after KVM was not shut down correctly, resulting in host crash like this:

BUG: unable to handle kernel paging request at ffff880870187ed8
IP: [<ffff880870187ed8>] 0xffff880870187ed8
PGD 2129067 PUD 80000008400001e3
Oops: 0011 [#1] PREEMPT SMP
Modules linked in: iwlmvm iwlwifi
CPU: 6 PID: 3983 Comm: qemu-system-x86 Not tainted 4.3.0-gentoo #6
Hardware name: Gigabyte Technology Co., Ltd. Z87X-UD7 TH/Z87X-UD7 TH-CF, BIOS F5a 06/12/2014
task: ffff88087a910000 ti: ffff8808632c0000 task.ti: ffff8808632c0000
RIP: 0010:[<ffff880870187ed8>]  [<ffff880870187ed8>] 0xffff880870187ed8
RSP: 0018:ffff8808632c3d08  EFLAGS: 00010006
RAX: ffff880870187db0 RBX: 0000000070187f58 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000003 RDI: ffff880870187db0
RBP: ffff8808632c3d48 R08: 0000000000000000 R09: 0000000000000000
R10: 00000000000103c0 R11: 0000000000000293 R12: ffffffff81ea03c8
R13: ffffffff8104c7cb R14: 0000000000000000 R15: 0000000000000003
FS:  00007f984f9b2700(0000) GS:ffff88089f380000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: ffff880870187ed8 CR3: 00000008645f8000 CR4: 00000000001426e0
Stack:
 ffffffff810cc83d 00000000632c3d28 0000000000000000 ffffffff81ea03c0
 0000000000000046 0000000000000003 0000000000000000 0000000000000000
 ffff8808632c3d80 ffffffff810cca44 ffff88087af63800 0000000000000286
Call Trace:
 [<ffffffff810cc83d>] ? __wake_up_common+0x4d/0x80
 [<ffffffff810cca44>] __wake_up+0x34/0x50
 [<ffffffff815d99e3>] __vga_put+0x73/0xd0
 [<ffffffff815d9db4>] vga_put+0x54/0x80
 [<ffffffff8169d042>] vfio_pci_vga_rw+0x1d2/0x220
 [<ffffffff8169a7f3>] vfio_pci_rw+0x33/0x60
 [<ffffffff8169abf7>] vfio_pci_write+0x17/0x20
 [<ffffffff816966a6>] vfio_device_fops_write+0x26/0x30
 [<ffffffff811a4b23>] __vfs_write+0x23/0xe0
 [<ffffffff811a4a53>] ? __vfs_read+0x23/0xd0
 [<ffffffff811b6e35>] ? do_vfs_ioctl+0x2b5/0x490
 [<ffffffff811a5194>] vfs_write+0xa4/0x190
 [<ffffffff811a5fa6>] SyS_pwrite64+0x66/0xa0
 [<ffffffff819a17d7>] entry_SYSCALL_64_fastpath+0x12/0x6a
Code: 88 ff ff e0 7e 18 70 08 88 ff ff 00 8c 57 76 08 88 ff ff 20 7f 18 70 08 88 ff ff 08 7f 18 70 08 88 ff ff 94 51 1a 81 ff ff ff ff <09> 00 00 00 00 00 00 00 01 8c 57 76 08 88 ff ff 00 8c 57 76 08
RIP  [<ffff880870187ed8>] 0xffff880870187ed8
 RSP <ffff8808632c3d08>
CR2: ffff880870187ed8

The patch fixes the crash, but doesn't help with getting GPU in guest
working again.

Any ideas?

---
 drivers/gpu/vga/vgaarb.c | 6 ++++--
 1 file changed, 4 insertions(+), 2 deletions(-)

Comments

Kirill A. Shutemov Dec. 10, 2015, 3:53 a.m. UTC | #1
On Mon, Nov 30, 2015 at 04:17:31AM +0200, Kirill A. Shutemov wrote:
> There are few defects in vga_get() related to signal hadning:
> 
>   - we shouldn't check for pending signals for TASK_UNINTERRUPTIBLE
>     case;
> 
>   - if we found pending signal we must remove ourself from wait queue
>     and change task state back to running;
> 
>   - -ERESTARTSYS is more appropriate, I guess.
> 
> Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name>

Ping?

David, this patch fixes crash. It would be nice to get it into 4.4.

> ---
> 
> Alex, I try to get KVM with VGA passthrough working properly. I have i915
> (HD 4600) on the host and GTX 580 for the guest. The guest GPU is not
> capabale of EFI, so I have to use x-vga=on. It's kinda work with your
> patch for i915.enable_hd_vgaarb=1. But guest refuse to initialize the GPU
> after KVM was not shut down correctly, resulting in host crash like this:
> 
> BUG: unable to handle kernel paging request at ffff880870187ed8
> IP: [<ffff880870187ed8>] 0xffff880870187ed8
> PGD 2129067 PUD 80000008400001e3
> Oops: 0011 [#1] PREEMPT SMP
> Modules linked in: iwlmvm iwlwifi
> CPU: 6 PID: 3983 Comm: qemu-system-x86 Not tainted 4.3.0-gentoo #6
> Hardware name: Gigabyte Technology Co., Ltd. Z87X-UD7 TH/Z87X-UD7 TH-CF, BIOS F5a 06/12/2014
> task: ffff88087a910000 ti: ffff8808632c0000 task.ti: ffff8808632c0000
> RIP: 0010:[<ffff880870187ed8>]  [<ffff880870187ed8>] 0xffff880870187ed8
> RSP: 0018:ffff8808632c3d08  EFLAGS: 00010006
> RAX: ffff880870187db0 RBX: 0000000070187f58 RCX: 0000000000000000
> RDX: 0000000000000000 RSI: 0000000000000003 RDI: ffff880870187db0
> RBP: ffff8808632c3d48 R08: 0000000000000000 R09: 0000000000000000
> R10: 00000000000103c0 R11: 0000000000000293 R12: ffffffff81ea03c8
> R13: ffffffff8104c7cb R14: 0000000000000000 R15: 0000000000000003
> FS:  00007f984f9b2700(0000) GS:ffff88089f380000(0000) knlGS:0000000000000000
> CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
> CR2: ffff880870187ed8 CR3: 00000008645f8000 CR4: 00000000001426e0
> Stack:
>  ffffffff810cc83d 00000000632c3d28 0000000000000000 ffffffff81ea03c0
>  0000000000000046 0000000000000003 0000000000000000 0000000000000000
>  ffff8808632c3d80 ffffffff810cca44 ffff88087af63800 0000000000000286
> Call Trace:
>  [<ffffffff810cc83d>] ? __wake_up_common+0x4d/0x80
>  [<ffffffff810cca44>] __wake_up+0x34/0x50
>  [<ffffffff815d99e3>] __vga_put+0x73/0xd0
>  [<ffffffff815d9db4>] vga_put+0x54/0x80
>  [<ffffffff8169d042>] vfio_pci_vga_rw+0x1d2/0x220
>  [<ffffffff8169a7f3>] vfio_pci_rw+0x33/0x60
>  [<ffffffff8169abf7>] vfio_pci_write+0x17/0x20
>  [<ffffffff816966a6>] vfio_device_fops_write+0x26/0x30
>  [<ffffffff811a4b23>] __vfs_write+0x23/0xe0
>  [<ffffffff811a4a53>] ? __vfs_read+0x23/0xd0
>  [<ffffffff811b6e35>] ? do_vfs_ioctl+0x2b5/0x490
>  [<ffffffff811a5194>] vfs_write+0xa4/0x190
>  [<ffffffff811a5fa6>] SyS_pwrite64+0x66/0xa0
>  [<ffffffff819a17d7>] entry_SYSCALL_64_fastpath+0x12/0x6a
> Code: 88 ff ff e0 7e 18 70 08 88 ff ff 00 8c 57 76 08 88 ff ff 20 7f 18 70 08 88 ff ff 08 7f 18 70 08 88 ff ff 94 51 1a 81 ff ff ff ff <09> 00 00 00 00 00 00 00 01 8c 57 76 08 88 ff ff 00 8c 57 76 08
> RIP  [<ffff880870187ed8>] 0xffff880870187ed8
>  RSP <ffff8808632c3d08>
> CR2: ffff880870187ed8
> 
> The patch fixes the crash, but doesn't help with getting GPU in guest
> working again.
> 
> Any ideas?
> 
> ---
>  drivers/gpu/vga/vgaarb.c | 6 ++++--
>  1 file changed, 4 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c
> index 3166e4bc4eb6..9abcaa53bd25 100644
> --- a/drivers/gpu/vga/vgaarb.c
> +++ b/drivers/gpu/vga/vgaarb.c
> @@ -395,8 +395,10 @@ int vga_get(struct pci_dev *pdev, unsigned int rsrc, int interruptible)
>  		set_current_state(interruptible ?
>  				  TASK_INTERRUPTIBLE :
>  				  TASK_UNINTERRUPTIBLE);
> -		if (signal_pending(current)) {
> -			rc = -EINTR;
> +		if (interruptible && signal_pending(current)) {
> +			__set_current_state(TASK_RUNNING);
> +			remove_wait_queue(&vga_wait_queue, &wait);
> +			rc = -ERESTARTSYS;
>  			break;
>  		}
>  		schedule();
> -- 
> 2.6.3
>
diff mbox

Patch

diff --git a/drivers/gpu/vga/vgaarb.c b/drivers/gpu/vga/vgaarb.c
index 3166e4bc4eb6..9abcaa53bd25 100644
--- a/drivers/gpu/vga/vgaarb.c
+++ b/drivers/gpu/vga/vgaarb.c
@@ -395,8 +395,10 @@  int vga_get(struct pci_dev *pdev, unsigned int rsrc, int interruptible)
 		set_current_state(interruptible ?
 				  TASK_INTERRUPTIBLE :
 				  TASK_UNINTERRUPTIBLE);
-		if (signal_pending(current)) {
-			rc = -EINTR;
+		if (interruptible && signal_pending(current)) {
+			__set_current_state(TASK_RUNNING);
+			remove_wait_queue(&vga_wait_queue, &wait);
+			rc = -ERESTARTSYS;
 			break;
 		}
 		schedule();