diff mbox

[RFC,4/7] arm64: tlbflush.h: add __tlbi() macro

Message ID 1471344312-26685-5-git-send-email-punit.agrawal@arm.com (mailing list archive)
State New, archived
Headers show

Commit Message

Punit Agrawal Aug. 16, 2016, 10:45 a.m. UTC
From: Mark Rutland <mark.rutland@arm.com>

As with dsb() and isb(), add a __tbli() helper so that we can avoid
distracting asm boilerplate every time we want a TLBI. As some TLBI
operations take an argument while others do not, some pre-processor is
used to handle these two cases with different assembly blocks.

The existing tlbflush.h code is moved over to use the helper.

Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Will Deacon <will.deacon@arm.com>
[ rename helper to __tlbi, update commit log ]
Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
---
 arch/arm64/include/asm/tlbflush.h | 31 +++++++++++++++++++++++--------
 1 file changed, 23 insertions(+), 8 deletions(-)

Comments

Will Deacon Aug. 19, 2016, 1:24 p.m. UTC | #1
On Tue, Aug 16, 2016 at 11:45:09AM +0100, Punit Agrawal wrote:
> From: Mark Rutland <mark.rutland@arm.com>
> 
> As with dsb() and isb(), add a __tbli() helper so that we can avoid

Minor typo: s/__tbli/__tlbi/

> distracting asm boilerplate every time we want a TLBI. As some TLBI
> operations take an argument while others do not, some pre-processor is
> used to handle these two cases with different assembly blocks.
> 
> The existing tlbflush.h code is moved over to use the helper.
> 
> Signed-off-by: Mark Rutland <mark.rutland@arm.com>
> Cc: Catalin Marinas <catalin.marinas@arm.com>
> Cc: Marc Zyngier <marc.zyngier@arm.com>
> Cc: Will Deacon <will.deacon@arm.com>
> [ rename helper to __tlbi, update commit log ]
> Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
> ---
>  arch/arm64/include/asm/tlbflush.h | 31 +++++++++++++++++++++++--------
>  1 file changed, 23 insertions(+), 8 deletions(-)
> 
> diff --git a/arch/arm64/include/asm/tlbflush.h b/arch/arm64/include/asm/tlbflush.h
> index b460ae2..d57a0be 100644
> --- a/arch/arm64/include/asm/tlbflush.h
> +++ b/arch/arm64/include/asm/tlbflush.h
> @@ -25,6 +25,21 @@
>  #include <asm/cputype.h>
>  
>  /*
> + * Raw TLBI operations. Drivers and most kernel code should use the TLB
> + * management routines below in preference to these. Where necessary, these can
> + * be used to avoid asm() boilerplate.
> + *
> + * Can be used as __tlbi(op) or __tlbi(op, arg), depending on whether a
> + * particular TLBI op takes an argument or not. The macros below handle invoking
> + * the asm with or without the register argument as appropriate.
> + */
> +#define TLBI_0(op, arg)		asm ("tlbi " #op)
> +#define TLBI_1(op, arg)		asm ("tlbi " #op ", %0" : : "r" (arg))
> +#define TLBI_N(op, arg, n, ...)	TLBI_##n(op, arg)

Should this be prefixed with underscores, too?

Will
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Punit Agrawal Aug. 19, 2016, 1:34 p.m. UTC | #2
Will Deacon <will.deacon@arm.com> writes:

> On Tue, Aug 16, 2016 at 11:45:09AM +0100, Punit Agrawal wrote:
>> From: Mark Rutland <mark.rutland@arm.com>
>> 
>> As with dsb() and isb(), add a __tbli() helper so that we can avoid
>
> Minor typo: s/__tbli/__tlbi/

Thanks for spotting. I've fixed this locally now.

>
>> distracting asm boilerplate every time we want a TLBI. As some TLBI
>> operations take an argument while others do not, some pre-processor is
>> used to handle these two cases with different assembly blocks.
>> 
>> The existing tlbflush.h code is moved over to use the helper.
>> 
>> Signed-off-by: Mark Rutland <mark.rutland@arm.com>
>> Cc: Catalin Marinas <catalin.marinas@arm.com>
>> Cc: Marc Zyngier <marc.zyngier@arm.com>
>> Cc: Will Deacon <will.deacon@arm.com>
>> [ rename helper to __tlbi, update commit log ]
>> Signed-off-by: Punit Agrawal <punit.agrawal@arm.com>
>> ---
>>  arch/arm64/include/asm/tlbflush.h | 31 +++++++++++++++++++++++--------
>>  1 file changed, 23 insertions(+), 8 deletions(-)
>> 
>> diff --git a/arch/arm64/include/asm/tlbflush.h b/arch/arm64/include/asm/tlbflush.h
>> index b460ae2..d57a0be 100644
>> --- a/arch/arm64/include/asm/tlbflush.h
>> +++ b/arch/arm64/include/asm/tlbflush.h
>> @@ -25,6 +25,21 @@
>>  #include <asm/cputype.h>
>>  
>>  /*
>> + * Raw TLBI operations. Drivers and most kernel code should use the TLB
>> + * management routines below in preference to these. Where necessary, these can
>> + * be used to avoid asm() boilerplate.
>> + *
>> + * Can be used as __tlbi(op) or __tlbi(op, arg), depending on whether a
>> + * particular TLBI op takes an argument or not. The macros below handle invoking
>> + * the asm with or without the register argument as appropriate.
>> + */
>> +#define TLBI_0(op, arg)		asm ("tlbi " #op)
>> +#define TLBI_1(op, arg)		asm ("tlbi " #op ", %0" : : "r" (arg))
>> +#define TLBI_N(op, arg, n, ...)	TLBI_##n(op, arg)
>
> Should this be prefixed with underscores, too?

As these were only used in the definition of __tlbi() I didn't
prefix them. I'll add them for the next posting.

Thanks for taking a look.

Punit

>
> Will
> _______________________________________________
> kvmarm mailing list
> kvmarm@lists.cs.columbia.edu
> https://lists.cs.columbia.edu/mailman/listinfo/kvmarm
--
To unsubscribe from this list: send the line "unsubscribe kvm" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/arch/arm64/include/asm/tlbflush.h b/arch/arm64/include/asm/tlbflush.h
index b460ae2..d57a0be 100644
--- a/arch/arm64/include/asm/tlbflush.h
+++ b/arch/arm64/include/asm/tlbflush.h
@@ -25,6 +25,21 @@ 
 #include <asm/cputype.h>
 
 /*
+ * Raw TLBI operations. Drivers and most kernel code should use the TLB
+ * management routines below in preference to these. Where necessary, these can
+ * be used to avoid asm() boilerplate.
+ *
+ * Can be used as __tlbi(op) or __tlbi(op, arg), depending on whether a
+ * particular TLBI op takes an argument or not. The macros below handle invoking
+ * the asm with or without the register argument as appropriate.
+ */
+#define TLBI_0(op, arg)		asm ("tlbi " #op)
+#define TLBI_1(op, arg)		asm ("tlbi " #op ", %0" : : "r" (arg))
+#define TLBI_N(op, arg, n, ...)	TLBI_##n(op, arg)
+
+#define __tlbi(op, ...)		TLBI_N(op, ##__VA_ARGS__, 1, 0)
+
+/*
  *	TLB Management
  *	==============
  *
@@ -66,7 +81,7 @@ 
 static inline void local_flush_tlb_all(void)
 {
 	dsb(nshst);
-	asm("tlbi	vmalle1");
+	__tlbi(vmalle1);
 	dsb(nsh);
 	isb();
 }
@@ -74,7 +89,7 @@  static inline void local_flush_tlb_all(void)
 static inline void flush_tlb_all(void)
 {
 	dsb(ishst);
-	asm("tlbi	vmalle1is");
+	__tlbi(vmalle1is);
 	dsb(ish);
 	isb();
 }
@@ -84,7 +99,7 @@  static inline void flush_tlb_mm(struct mm_struct *mm)
 	unsigned long asid = ASID(mm) << 48;
 
 	dsb(ishst);
-	asm("tlbi	aside1is, %0" : : "r" (asid));
+	__tlbi(aside1is, asid);
 	dsb(ish);
 }
 
@@ -94,7 +109,7 @@  static inline void flush_tlb_page(struct vm_area_struct *vma,
 	unsigned long addr = uaddr >> 12 | (ASID(vma->vm_mm) << 48);
 
 	dsb(ishst);
-	asm("tlbi	vale1is, %0" : : "r" (addr));
+	__tlbi(vale1is, addr);
 	dsb(ish);
 }
 
@@ -122,9 +137,9 @@  static inline void __flush_tlb_range(struct vm_area_struct *vma,
 	dsb(ishst);
 	for (addr = start; addr < end; addr += 1 << (PAGE_SHIFT - 12)) {
 		if (last_level)
-			asm("tlbi vale1is, %0" : : "r"(addr));
+			__tlbi(vale1is, addr);
 		else
-			asm("tlbi vae1is, %0" : : "r"(addr));
+			__tlbi(vae1is, addr);
 	}
 	dsb(ish);
 }
@@ -149,7 +164,7 @@  static inline void flush_tlb_kernel_range(unsigned long start, unsigned long end
 
 	dsb(ishst);
 	for (addr = start; addr < end; addr += 1 << (PAGE_SHIFT - 12))
-		asm("tlbi vaae1is, %0" : : "r"(addr));
+		__tlbi(vaae1is, addr);
 	dsb(ish);
 	isb();
 }
@@ -163,7 +178,7 @@  static inline void __flush_tlb_pgtable(struct mm_struct *mm,
 {
 	unsigned long addr = uaddr >> 12 | (ASID(mm) << 48);
 
-	asm("tlbi	vae1is, %0" : : "r" (addr));
+	__tlbi(vae1is, addr);
 	dsb(ish);
 }