@@ -957,6 +957,7 @@ enum {
u32 cpu_based_2nd_exec_ctrl;
u32 vmexit_ctrl;
u32 vmentry_ctrl;
+ struct nested_vmx_msrs nested;
} vmcs_config;
static struct vmx_capability {
@@ -2688,6 +2689,11 @@ static inline bool nested_vmx_allowed(struct kvm_vcpu *vcpu)
*/
static void nested_vmx_setup_ctls_msrs(struct nested_vmx_msrs *msrs, bool apicv)
{
+ if (!nested) {
+ memset(msrs, 0, sizeof(*msrs));
+ return;
+ }
+
/*
* Note that as a general rule, the high half of the MSRs (bits in
* the control fields which may be 1) should be initialized by the
@@ -2712,13 +2718,11 @@ static void nested_vmx_setup_ctls_msrs(struct nested_vmx_msrs *msrs, bool apicv)
msrs->pinbased_ctls_high &=
PIN_BASED_EXT_INTR_MASK |
PIN_BASED_NMI_EXITING |
- PIN_BASED_VIRTUAL_NMIS;
+ PIN_BASED_VIRTUAL_NMIS |
+ (apicv ? PIN_BASED_POSTED_INTR : 0);
msrs->pinbased_ctls_high |=
PIN_BASED_ALWAYSON_WITHOUT_TRUE_MSR |
PIN_BASED_VMX_PREEMPTION_TIMER;
- if (apicv)
- msrs->pinbased_ctls_high |=
- PIN_BASED_POSTED_INTR;
/* exit controls */
rdmsr(MSR_IA32_VMX_EXIT_CTLS,
@@ -3231,6 +3235,10 @@ static inline bool vmx_feature_control_msr_valid(struct kvm_vcpu *vcpu,
static int vmx_get_msr_feature(struct kvm_msr_entry *msr)
{
switch (msr->index) {
+ case MSR_IA32_VMX_BASIC ... MSR_IA32_VMX_VMFUNC:
+ if (!nested)
+ return 1;
+ return vmx_get_vmx_msr(&vmcs_config.nested, msr->index, &msr->data);
case MSR_IA32_ARCH_CAPABILITIES:
if (!boot_cpu_has(X86_FEATURE_ARCH_CAPABILITIES))
return 1;
@@ -3706,6 +3714,7 @@ static __init int setup_vmcs_config(struct vmcs_config *vmcs_conf)
u32 _vmexit_control = 0;
u32 _vmentry_control = 0;
+ memset(vmcs_conf, 0, sizeof(*vmcs_conf));
min = CPU_BASED_HLT_EXITING |
#ifdef CONFIG_X86_64
CPU_BASED_CR8_LOAD_EXITING |
@@ -7099,6 +7108,7 @@ static __init int hardware_setup(void)
init_vmcs_shadow_fields();
kvm_set_posted_intr_wakeup_handler(wakeup_handler);
+ nested_vmx_setup_ctls_msrs(&vmcs_config.nested, enable_apicv);
kvm_mce_cap_supported |= MCG_LMCE_P;
@@ -9830,6 +9840,7 @@ static void __init vmx_check_processor_compat(void *rtn)
*(int *)rtn = 0;
if (setup_vmcs_config(&vmcs_conf) < 0)
*(int *)rtn = -EIO;
+ nested_vmx_setup_ctls_msrs(&vmcs_conf.nested, enable_apicv);
if (memcmp(&vmcs_config, &vmcs_conf, sizeof(struct vmcs_config)) != 0) {
printk(KERN_ERR "kvm: CPU %d feature inconsistency!\n",
smp_processor_id());
@@ -1056,6 +1056,25 @@ bool kvm_rdpmc(struct kvm_vcpu *vcpu)
* can be used by a hypervisor to validate requested CPU features.
*/
static u32 msr_based_features[] = {
+ MSR_IA32_VMX_BASIC,
+ MSR_IA32_VMX_TRUE_PINBASED_CTLS,
+ MSR_IA32_VMX_PINBASED_CTLS,
+ MSR_IA32_VMX_TRUE_PROCBASED_CTLS,
+ MSR_IA32_VMX_PROCBASED_CTLS,
+ MSR_IA32_VMX_TRUE_EXIT_CTLS,
+ MSR_IA32_VMX_EXIT_CTLS,
+ MSR_IA32_VMX_TRUE_ENTRY_CTLS,
+ MSR_IA32_VMX_ENTRY_CTLS,
+ MSR_IA32_VMX_MISC,
+ MSR_IA32_VMX_CR0_FIXED0,
+ MSR_IA32_VMX_CR0_FIXED1,
+ MSR_IA32_VMX_CR4_FIXED0,
+ MSR_IA32_VMX_CR4_FIXED1,
+ MSR_IA32_VMX_VMCS_ENUM,
+ MSR_IA32_VMX_PROCBASED_CTLS2,
+ MSR_IA32_VMX_EPT_VPID_CAP,
+ MSR_IA32_VMX_VMFUNC,
+
MSR_IA32_ARCH_CAPABILITIES,
MSR_F10H_DECFG,
};
Use the new MSR feature framework to tell userspace which VMX capabilities are available for nested hypervisors. Before, these were only accessible with the KVM_GET_MSR VCPU ioctl, after VCPUs had been created. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> --- arch/x86/kvm/vmx.c | 19 +++++++++++++++---- arch/x86/kvm/x86.c | 19 +++++++++++++++++++ 2 files changed, 34 insertions(+), 4 deletions(-)