diff mbox series

[v3,7/7] cpuidle/poll_state: replace cpu_relax with smp_cond_load_relaxed

Message ID 1706524834-11275-8-git-send-email-mihai.carabas@oracle.com (mailing list archive)
State New, archived
Headers show
Series [v3,1/7] x86: Move ARCH_HAS_CPU_RELAX to arch | expand

Commit Message

Mihai Carabas Jan. 29, 2024, 10:40 a.m. UTC
cpu_relax on ARM64 does a simple "yield". Thus we replace it with
smp_cond_load_relaxed which basically does a "wfe".

Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com>
---
 drivers/cpuidle/poll_state.c | 14 +++++++++-----
 1 file changed, 9 insertions(+), 5 deletions(-)

Comments

Rafael J. Wysocki Jan. 29, 2024, 2:52 p.m. UTC | #1
On Mon, Jan 29, 2024 at 12:56 PM Mihai Carabas <mihai.carabas@oracle.com> wrote:
>
> cpu_relax on ARM64 does a simple "yield". Thus we replace it with
> smp_cond_load_relaxed which basically does a "wfe".
>
> Suggested-by: Peter Zijlstra <peterz@infradead.org>
> Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com>
> ---
>  drivers/cpuidle/poll_state.c | 14 +++++++++-----
>  1 file changed, 9 insertions(+), 5 deletions(-)
>
> diff --git a/drivers/cpuidle/poll_state.c b/drivers/cpuidle/poll_state.c
> index 9b6d90a72601..440cd713e39a 100644
> --- a/drivers/cpuidle/poll_state.c
> +++ b/drivers/cpuidle/poll_state.c
> @@ -26,12 +26,16 @@ static int __cpuidle poll_idle(struct cpuidle_device *dev,
>
>                 limit = cpuidle_poll_time(drv, dev);
>
> -               while (!need_resched()) {
> -                       cpu_relax();
> -                       if (loop_count++ < POLL_IDLE_RELAX_COUNT)
> -                               continue;
> -
> +               for (;;) {
>                         loop_count = 0;
> +
> +                       smp_cond_load_relaxed(&current_thread_info()->flags,
> +                                             (VAL & _TIF_NEED_RESCHED) ||
> +                                             (loop_count++ >= POLL_IDLE_RELAX_COUNT));

The inner parens are not necessary AFAICS.

Also, doesn't this return a value which can be used for checking if
_TIF_NEED_RESCHED is set instead of the condition below?

> +
> +                       if (loop_count < POLL_IDLE_RELAX_COUNT)
> +                               break;
> +
>                         if (local_clock_noinstr() - time_start > limit) {
>                                 dev->poll_time_limit = true;
>                                 break;
> --
Mihai Carabas Jan. 29, 2024, 7:20 p.m. UTC | #2
La 29.01.2024 16:52, Rafael J. Wysocki a scris:
> On Mon, Jan 29, 2024 at 12:56 PM Mihai Carabas <mihai.carabas@oracle.com> wrote:
>> cpu_relax on ARM64 does a simple "yield". Thus we replace it with
>> smp_cond_load_relaxed which basically does a "wfe".
>>
>> Suggested-by: Peter Zijlstra <peterz@infradead.org>
>> Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com>
>> ---
>>   drivers/cpuidle/poll_state.c | 14 +++++++++-----
>>   1 file changed, 9 insertions(+), 5 deletions(-)
>>
>> diff --git a/drivers/cpuidle/poll_state.c b/drivers/cpuidle/poll_state.c
>> index 9b6d90a72601..440cd713e39a 100644
>> --- a/drivers/cpuidle/poll_state.c
>> +++ b/drivers/cpuidle/poll_state.c
>> @@ -26,12 +26,16 @@ static int __cpuidle poll_idle(struct cpuidle_device *dev,
>>
>>                  limit = cpuidle_poll_time(drv, dev);
>>
>> -               while (!need_resched()) {
>> -                       cpu_relax();
>> -                       if (loop_count++ < POLL_IDLE_RELAX_COUNT)
>> -                               continue;
>> -
>> +               for (;;) {
>>                          loop_count = 0;
>> +
>> +                       smp_cond_load_relaxed(&current_thread_info()->flags,
>> +                                             (VAL & _TIF_NEED_RESCHED) ||
>> +                                             (loop_count++ >= POLL_IDLE_RELAX_COUNT));
> The inner parens are not necessary AFAICS.

Provides better reading. Do you want to remove these?

> Also, doesn't this return a value which can be used for checking if
> _TIF_NEED_RESCHED is set instead of the condition below?

Yes, indeed - should I modify this check? (somehow I wanted to preserve 
the original check)

Thank you,
Mihai

>> +
>> +                       if (loop_count < POLL_IDLE_RELAX_COUNT)
>> +                               break;
>> +
>>                          if (local_clock_noinstr() - time_start > limit) {
>>                                  dev->poll_time_limit = true;
>>                                  break;
>> --
Rafael J. Wysocki Jan. 29, 2024, 7:41 p.m. UTC | #3
On Mon, Jan 29, 2024 at 8:21 PM Mihai Carabas <mihai.carabas@oracle.com> wrote:
>
> La 29.01.2024 16:52, Rafael J. Wysocki a scris:
> > On Mon, Jan 29, 2024 at 12:56 PM Mihai Carabas <mihai.carabas@oracle.com> wrote:
> >> cpu_relax on ARM64 does a simple "yield". Thus we replace it with
> >> smp_cond_load_relaxed which basically does a "wfe".
> >>
> >> Suggested-by: Peter Zijlstra <peterz@infradead.org>
> >> Signed-off-by: Mihai Carabas <mihai.carabas@oracle.com>
> >> ---
> >>   drivers/cpuidle/poll_state.c | 14 +++++++++-----
> >>   1 file changed, 9 insertions(+), 5 deletions(-)
> >>
> >> diff --git a/drivers/cpuidle/poll_state.c b/drivers/cpuidle/poll_state.c
> >> index 9b6d90a72601..440cd713e39a 100644
> >> --- a/drivers/cpuidle/poll_state.c
> >> +++ b/drivers/cpuidle/poll_state.c
> >> @@ -26,12 +26,16 @@ static int __cpuidle poll_idle(struct cpuidle_device *dev,
> >>
> >>                  limit = cpuidle_poll_time(drv, dev);
> >>
> >> -               while (!need_resched()) {
> >> -                       cpu_relax();
> >> -                       if (loop_count++ < POLL_IDLE_RELAX_COUNT)
> >> -                               continue;
> >> -
> >> +               for (;;) {
> >>                          loop_count = 0;
> >> +
> >> +                       smp_cond_load_relaxed(&current_thread_info()->flags,
> >> +                                             (VAL & _TIF_NEED_RESCHED) ||
> >> +                                             (loop_count++ >= POLL_IDLE_RELAX_COUNT));
> > The inner parens are not necessary AFAICS.
>
> Provides better reading. Do you want to remove these?

Whether or not it provides better reading is in the eye of the reader.
We seem to disagree here, because IMO redundant characters don't help
clarity.

> > Also, doesn't this return a value which can be used for checking if
> > _TIF_NEED_RESCHED is set instead of the condition below?
>
> Yes, indeed - should I modify this check? (somehow I wanted to preserve
> the original check)

But you haven't - it goes the other way around now.

In theory, _TIF_NEED_RESCHED may be set in the last iteration, in
which the check below will miss it, won't it?

> >> +
> >> +                       if (loop_count < POLL_IDLE_RELAX_COUNT)
> >> +                               break;
> >> +
> >>                          if (local_clock_noinstr() - time_start > limit) {
> >>                                  dev->poll_time_limit = true;
> >>                                  break;
> >> --
diff mbox series

Patch

diff --git a/drivers/cpuidle/poll_state.c b/drivers/cpuidle/poll_state.c
index 9b6d90a72601..440cd713e39a 100644
--- a/drivers/cpuidle/poll_state.c
+++ b/drivers/cpuidle/poll_state.c
@@ -26,12 +26,16 @@  static int __cpuidle poll_idle(struct cpuidle_device *dev,
 
 		limit = cpuidle_poll_time(drv, dev);
 
-		while (!need_resched()) {
-			cpu_relax();
-			if (loop_count++ < POLL_IDLE_RELAX_COUNT)
-				continue;
-
+		for (;;) {
 			loop_count = 0;
+
+			smp_cond_load_relaxed(&current_thread_info()->flags,
+					      (VAL & _TIF_NEED_RESCHED) ||
+					      (loop_count++ >= POLL_IDLE_RELAX_COUNT));
+
+			if (loop_count < POLL_IDLE_RELAX_COUNT)
+				break;
+
 			if (local_clock_noinstr() - time_start > limit) {
 				dev->poll_time_limit = true;
 				break;