@@ -4728,6 +4728,83 @@ static void test_pml(void)
}
/*
+ * The following checks are performed for the VM-exit MSR-store address if
+ * the VM-exit MSR-store count field is non-zero:
+ *
+ * - The lower 4 bits of the VM-exit MSR-store address must be 0.
+ * The address should not set any bits beyond the processor’s
+ * physical-address width.
+ *
+ * - The address of the last byte in the VM-exit MSR-store area
+ * should not set any bits beyond the processor’s physical-address
+ * width. The address of this last byte is VM-exit MSR-store address
+ * + (MSR count * 16) - 1. (The arithmetic used for the computation
+ * uses more bits than the processor’s physical-address width.)
+ *
+ * If IA32_VMX_BASIC[48] is read as 1, neither address should set any bits
+ * in the range 63:32.
+ *
+ * [Intel SDM]
+ */
+static void test_exit_msr_store(void)
+{
+ exit_msr_store = alloc_page();
+ u64 tmp;
+ u32 exit_msr_st_cnt = 1;
+ int i;
+ u32 addr_len = 64;
+
+ vmcs_write(EXI_MSR_ST_CNT, exit_msr_st_cnt);
+
+ /* Check first 4 bits of VM-exit MSR-store address */
+ for (i = 0; i < 4; i++) {
+ tmp = (u64)exit_msr_store | 1ull << i;
+ vmcs_write(EXIT_MSR_ST_ADDR, tmp);
+ report_prefix_pushf("VM-exit MSR-store addr [4:0] %lx",
+ tmp & 0xf);
+ test_vmx_controls(false, false);
+ report_prefix_pop();
+ }
+
+ if (basic.val & (1ul << 48))
+ addr_len = 32;
+
+ test_vmcs_addr_values("VM-exit-MSR-store address",
+ EXIT_MSR_ST_ADDR, false, false, 16,
+ 4, addr_len - 1);
+
+ /*
+ * Check last byte of VM-exit MSR-store address
+ */
+ exit_msr_store = (struct vmx_msr_entry *)((u64)exit_msr_store & ~0xf);
+
+ for (i = (addr_len == 64 ? cpuid_maxphyaddr(): addr_len);
+ i < 64; i++) {
+ tmp = ((u64)exit_msr_store + exit_msr_st_cnt * 16 - 1) |
+ 1ul << i;
+ vmcs_write(EXIT_MSR_ST_ADDR,
+ tmp - (exit_msr_st_cnt * 16 - 1));
+ test_vmx_controls(false, false);
+ }
+
+ vmcs_write(EXI_MSR_ST_CNT, 2);
+ vmcs_write(EXIT_MSR_ST_ADDR, (1ULL << cpuid_maxphyaddr()) - 16);
+ test_vmx_controls(false, false);
+ vmcs_write(EXIT_MSR_ST_ADDR, (1ULL << cpuid_maxphyaddr()) - 32);
+ test_vmx_controls(true, false);
+ vmcs_write(EXIT_MSR_ST_ADDR, (1ULL << cpuid_maxphyaddr()) - 48);
+ test_vmx_controls(true, false);
+}
+
+/*
+ * Tests for VM-exit controls
+ */
+static void test_vm_exit_ctls(void)
+{
+ test_exit_msr_store();
+}
+
+/*
* Check that the virtual CPU checks all of the VMX controls as
* documented in the Intel SDM.
*/
@@ -4753,6 +4830,7 @@ static void vmx_controls_test(void)
test_invalid_event_injection();
test_vpid();
test_eptp();
+ test_vm_exit_ctls();
}
static bool valid_vmcs_for_vmentry(void)
According to section "Checks on VMX Controls" in Intel SDM vol 3C, the following checks performed for the VM-exit MSR-store address if the the VM-exit MSR-store count field is non-zero: - The lower 4 bits of the VM-exit MSR-store address must be 0. The address should not set any bits beyond the processor’s physical-address width. - The address of the last byte in the VM-exit MSR-store area should not set any bits beyond the processor’s physical-address width. The address of this last byte is VM-exit MSR-store address + (MSR count * 16) - 1. (The arithmetic used for the computation uses more bits than the processor’s physical-address width.) If IA32_VMX_BASIC[48] is read as 1, neither address should set any bits in the range 63:32. Signed-off-by: Krish Sadhukhan <krish.sadhukhan@oracle.com> Reviewed-by: Mihai Carabas <mihai.carabas@oracle.com> --- x86/vmx_tests.c | 78 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 78 insertions(+)