diff mbox series

[v3,10/17] KVM: PPC: Book3S HV: XIVE: add get/set accessors for the VP XIVE state

Message ID 20190315120609.25910-11-clg@kaod.org (mailing list archive)
State New, archived
Headers show
Series KVM: PPC: Book3S HV: add XIVE native exploitation mode | expand

Commit Message

Cédric Le Goater March 15, 2019, 12:06 p.m. UTC
The state of the thread interrupt management registers needs to be
collected for migration. These registers are cached under the
'xive_saved_state.w01' field of the VCPU when the VPCU context is
pulled from the HW thread. An OPAL call retrieves the backup of the
IPB register in the underlying XIVE NVT structure and merges it in the
KVM state.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
---
 
 Changes since v2 :

 - reduced the size of kvmppc_one_reg timaval attribute to two u64s
 - stopped returning of the OS CAM line value

 arch/powerpc/include/asm/kvm_ppc.h         | 11 ++++
 arch/powerpc/include/uapi/asm/kvm.h        |  2 +
 arch/powerpc/kvm/book3s.c                  | 24 +++++++
 arch/powerpc/kvm/book3s_xive_native.c      | 76 ++++++++++++++++++++++
 Documentation/virtual/kvm/devices/xive.txt | 19 ++++++
 5 files changed, 132 insertions(+)

Comments

David Gibson March 19, 2019, 5:08 a.m. UTC | #1
On Fri, Mar 15, 2019 at 01:06:02PM +0100, Cédric Le Goater wrote:
> The state of the thread interrupt management registers needs to be
> collected for migration. These registers are cached under the
> 'xive_saved_state.w01' field of the VCPU when the VPCU context is
> pulled from the HW thread. An OPAL call retrieves the backup of the
> IPB register in the underlying XIVE NVT structure and merges it in the
> KVM state.
> 
> Signed-off-by: Cédric Le Goater <clg@kaod.org>

Reviewed-by: David Gibson <david@gibson.dropbear.id.au>

[snip]
> diff --git a/Documentation/virtual/kvm/devices/xive.txt b/Documentation/virtual/kvm/devices/xive.txt
> index e6a984592189..eb864d72ddc3 100644
> --- a/Documentation/virtual/kvm/devices/xive.txt
> +++ b/Documentation/virtual/kvm/devices/xive.txt
> @@ -104,6 +104,25 @@ the legacy interrupt mode, referred as XICS (POWER7/8).
>      -ENOENT: Unknown source number
>      -EINVAL: Not initialized source number
>  
> +* VCPU state
> +
> +  The XIVE IC maintains VP interrupt state in an internal structure
> +  called the NVT. When a VP is not dispatched on a HW processor
> +  thread, this structure can be updated by HW if the VP is the target
> +  of an event notification.
> +
> +  It is important for migration to capture the cached IPB from the NVT
> +  as it synthesizes the priorities of the pending interrupts. We
> +  capture a bit more to report debug information.
> +
> +  KVM_REG_PPC_VP_STATE (4 * 64bits)
> +  bits:     |  63  ....  32  |  31  ....  0  |
> +  values:   |   TIMA word0   |   TIMA word1  |
> +  bits:     | 127       ..........       64  |
> +  values:   |            unused              |
> +  bits:     | 255       ..........      128  |
> +  values:   |            unused              |
> +
>  * Migration:
>  
>    Saving the state of a VM using the XIVE native exploitation mode

Nit: looks like this doc needs to be updated now that only 2x 64-bit
values are returned.
diff mbox series

Patch

diff --git a/arch/powerpc/include/asm/kvm_ppc.h b/arch/powerpc/include/asm/kvm_ppc.h
index 1e61877fe147..37c61a64f68d 100644
--- a/arch/powerpc/include/asm/kvm_ppc.h
+++ b/arch/powerpc/include/asm/kvm_ppc.h
@@ -272,6 +272,7 @@  union kvmppc_one_reg {
 		u64	addr;
 		u64	length;
 	}	vpaval;
+	u64	xive_timaval[2];
 };
 
 struct kvmppc_ops {
@@ -604,6 +605,10 @@  extern int kvmppc_xive_native_connect_vcpu(struct kvm_device *dev,
 extern void kvmppc_xive_native_cleanup_vcpu(struct kvm_vcpu *vcpu);
 extern void kvmppc_xive_native_init_module(void);
 extern void kvmppc_xive_native_exit_module(void);
+extern int kvmppc_xive_native_get_vp(struct kvm_vcpu *vcpu,
+				     union kvmppc_one_reg *val);
+extern int kvmppc_xive_native_set_vp(struct kvm_vcpu *vcpu,
+				     union kvmppc_one_reg *val);
 
 #else
 static inline int kvmppc_xive_set_xive(struct kvm *kvm, u32 irq, u32 server,
@@ -636,6 +641,12 @@  static inline int kvmppc_xive_native_connect_vcpu(struct kvm_device *dev,
 static inline void kvmppc_xive_native_cleanup_vcpu(struct kvm_vcpu *vcpu) { }
 static inline void kvmppc_xive_native_init_module(void) { }
 static inline void kvmppc_xive_native_exit_module(void) { }
+static inline int kvmppc_xive_native_get_vp(struct kvm_vcpu *vcpu,
+					    union kvmppc_one_reg *val)
+{ return 0; }
+static inline int kvmppc_xive_native_set_vp(struct kvm_vcpu *vcpu,
+					    union kvmppc_one_reg *val)
+{ return -ENOENT; }
 
 #endif /* CONFIG_KVM_XIVE */
 
diff --git a/arch/powerpc/include/uapi/asm/kvm.h b/arch/powerpc/include/uapi/asm/kvm.h
index caf52be89494..3de0d1395c01 100644
--- a/arch/powerpc/include/uapi/asm/kvm.h
+++ b/arch/powerpc/include/uapi/asm/kvm.h
@@ -480,6 +480,8 @@  struct kvm_ppc_cpu_char {
 #define  KVM_REG_PPC_ICP_PPRI_SHIFT	16	/* pending irq priority */
 #define  KVM_REG_PPC_ICP_PPRI_MASK	0xff
 
+#define KVM_REG_PPC_VP_STATE	(KVM_REG_PPC | KVM_REG_SIZE_U128 | 0x8d)
+
 /* Device control API: PPC-specific devices */
 #define KVM_DEV_MPIC_GRP_MISC		1
 #define   KVM_DEV_MPIC_BASE_ADDR	0	/* 64-bit */
diff --git a/arch/powerpc/kvm/book3s.c b/arch/powerpc/kvm/book3s.c
index 96d43f091255..f85a9211f30c 100644
--- a/arch/powerpc/kvm/book3s.c
+++ b/arch/powerpc/kvm/book3s.c
@@ -641,6 +641,18 @@  int kvmppc_get_one_reg(struct kvm_vcpu *vcpu, u64 id,
 				*val = get_reg_val(id, kvmppc_xics_get_icp(vcpu));
 			break;
 #endif /* CONFIG_KVM_XICS */
+#ifdef CONFIG_KVM_XIVE
+		case KVM_REG_PPC_VP_STATE:
+			if (!vcpu->arch.xive_vcpu) {
+				r = -ENXIO;
+				break;
+			}
+			if (xive_enabled())
+				r = kvmppc_xive_native_get_vp(vcpu, val);
+			else
+				r = -ENXIO;
+			break;
+#endif /* CONFIG_KVM_XIVE */
 		case KVM_REG_PPC_FSCR:
 			*val = get_reg_val(id, vcpu->arch.fscr);
 			break;
@@ -714,6 +726,18 @@  int kvmppc_set_one_reg(struct kvm_vcpu *vcpu, u64 id,
 				r = kvmppc_xics_set_icp(vcpu, set_reg_val(id, *val));
 			break;
 #endif /* CONFIG_KVM_XICS */
+#ifdef CONFIG_KVM_XIVE
+		case KVM_REG_PPC_VP_STATE:
+			if (!vcpu->arch.xive_vcpu) {
+				r = -ENXIO;
+				break;
+			}
+			if (xive_enabled())
+				r = kvmppc_xive_native_set_vp(vcpu, val);
+			else
+				r = -ENXIO;
+			break;
+#endif /* CONFIG_KVM_XIVE */
 		case KVM_REG_PPC_FSCR:
 			vcpu->arch.fscr = set_reg_val(id, *val);
 			break;
diff --git a/arch/powerpc/kvm/book3s_xive_native.c b/arch/powerpc/kvm/book3s_xive_native.c
index ea091c0a8fb6..675c209cf570 100644
--- a/arch/powerpc/kvm/book3s_xive_native.c
+++ b/arch/powerpc/kvm/book3s_xive_native.c
@@ -884,6 +884,82 @@  static int kvmppc_xive_native_create(struct kvm_device *dev, u32 type)
 	return ret;
 }
 
+/*
+ * Interrupt Pending Buffer (IPB) offset
+ */
+#define TM_IPB_SHIFT 40
+#define TM_IPB_MASK  (((u64) 0xFF) << TM_IPB_SHIFT)
+
+int kvmppc_xive_native_get_vp(struct kvm_vcpu *vcpu, union kvmppc_one_reg *val)
+{
+	struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
+	u64 opal_state;
+	int rc;
+
+	if (!kvmppc_xive_enabled(vcpu))
+		return -EPERM;
+
+	if (!xc)
+		return -ENOENT;
+
+	/* Thread context registers. We only care about IPB and CPPR */
+	val->xive_timaval[0] = vcpu->arch.xive_saved_state.w01;
+
+	/* Get the VP state from OPAL */
+	rc = xive_native_get_vp_state(xc->vp_id, &opal_state);
+	if (rc)
+		return rc;
+
+	/*
+	 * Capture the backup of IPB register in the NVT structure and
+	 * merge it in our KVM VP state.
+	 */
+	val->xive_timaval[0] |= cpu_to_be64(opal_state & TM_IPB_MASK);
+
+	pr_devel("%s NSR=%02x CPPR=%02x IBP=%02x PIPR=%02x w01=%016llx w2=%08x opal=%016llx\n",
+		 __func__,
+		 vcpu->arch.xive_saved_state.nsr,
+		 vcpu->arch.xive_saved_state.cppr,
+		 vcpu->arch.xive_saved_state.ipb,
+		 vcpu->arch.xive_saved_state.pipr,
+		 vcpu->arch.xive_saved_state.w01,
+		 (u32) vcpu->arch.xive_cam_word, opal_state);
+
+	return 0;
+}
+
+int kvmppc_xive_native_set_vp(struct kvm_vcpu *vcpu, union kvmppc_one_reg *val)
+{
+	struct kvmppc_xive_vcpu *xc = vcpu->arch.xive_vcpu;
+	struct kvmppc_xive *xive = vcpu->kvm->arch.xive;
+
+	pr_devel("%s w01=%016llx vp=%016llx\n", __func__,
+		 val->xive_timaval[0], val->xive_timaval[1]);
+
+	if (!kvmppc_xive_enabled(vcpu))
+		return -EPERM;
+
+	if (!xc || !xive)
+		return -ENOENT;
+
+	/* We can't update the state of a "pushed" VCPU	 */
+	if (WARN_ON(vcpu->arch.xive_pushed))
+		return -EBUSY;
+
+	/*
+	 * Restore the thread context registers. IPB and CPPR should
+	 * be the only ones that matter.
+	 */
+	vcpu->arch.xive_saved_state.w01 = val->xive_timaval[0];
+
+	/*
+	 * There is no need to restore the XIVE internal state (IPB
+	 * stored in the NVT) as the IPB register was merged in KVM VP
+	 * state when captured.
+	 */
+	return 0;
+}
+
 static int xive_native_debug_show(struct seq_file *m, void *private)
 {
 	struct kvmppc_xive *xive = m->private;
diff --git a/Documentation/virtual/kvm/devices/xive.txt b/Documentation/virtual/kvm/devices/xive.txt
index e6a984592189..eb864d72ddc3 100644
--- a/Documentation/virtual/kvm/devices/xive.txt
+++ b/Documentation/virtual/kvm/devices/xive.txt
@@ -104,6 +104,25 @@  the legacy interrupt mode, referred as XICS (POWER7/8).
     -ENOENT: Unknown source number
     -EINVAL: Not initialized source number
 
+* VCPU state
+
+  The XIVE IC maintains VP interrupt state in an internal structure
+  called the NVT. When a VP is not dispatched on a HW processor
+  thread, this structure can be updated by HW if the VP is the target
+  of an event notification.
+
+  It is important for migration to capture the cached IPB from the NVT
+  as it synthesizes the priorities of the pending interrupts. We
+  capture a bit more to report debug information.
+
+  KVM_REG_PPC_VP_STATE (4 * 64bits)
+  bits:     |  63  ....  32  |  31  ....  0  |
+  values:   |   TIMA word0   |   TIMA word1  |
+  bits:     | 127       ..........       64  |
+  values:   |            unused              |
+  bits:     | 255       ..........      128  |
+  values:   |            unused              |
+
 * Migration:
 
   Saving the state of a VM using the XIVE native exploitation mode