[PATCHv2,48/59] iommu/vt-d: Support MKTME in DMA remapping

Commit Message

Kirill A . Shutemov July 31, 2019, 3:08 p.m. UTC

From: Jacob Pan <[e-mail]>

When MKTME is enabled, keyid is stored in the high order bits of physical
address. For DMA transactions targeting encrypted physical memory, keyid
must be included in the IOVA to physical address translation.

This patch appends page keyid when setting up the IOMMU PTEs. On the
reverse direction, keyid bits are cleared in the physical address lookup.
Mapping functions of both DMA ops and IOMMU ops are covered.

Signed-off-by: Jacob Pan <[e-mail]>
Signed-off-by: Kirill A. Shutemov <[e-mail]>
---
 drivers/iommu/intel-iommu.c | 29 +++++++++++++++++++++++++++--
 include/linux/intel-iommu.h |  9 ++++++++-
 2 files changed, 35 insertions(+), 3 deletions(-)

Patch

diff --git a/drivers/iommu/intel-iommu.c b/drivers/iommu/intel-iommu.c
index ac4172c02244..32d22872656b 100644
--- a/drivers/iommu/intel-iommu.c
+++ b/drivers/iommu/intel-iommu.c
@@ -867,6 +867,28 @@  static void free_context_table(struct intel_iommu *iommu)
 	spin_unlock_irqrestore(&iommu->lock, flags);
 }
 
+static inline void set_pte_mktme_keyid(unsigned long phys_pfn,
+		phys_addr_t *pteval)
+{
+	unsigned long keyid;
+
+	if (!pfn_valid(phys_pfn))
+		return;
+
+	keyid = page_keyid(pfn_to_page(phys_pfn));
+
+#ifdef CONFIG_X86_INTEL_MKTME
+	/*
+	 * When MKTME is enabled, set keyid in PTE such that DMA
+	 * remapping will include keyid in the translation from IOVA
+	 * to physical address. This applies to both user and kernel
+	 * allocated DMA memory.
+	 */
+	*pteval &= ~mktme_keyid_mask();
+	*pteval |= keyid << mktme_keyid_shift();
+#endif
+}
+
 static struct dma_pte *pfn_to_dma_pte(struct dmar_domain *domain,
 				      unsigned long pfn, int *target_level)
 {
@@ -893,7 +915,7 @@  static struct dma_pte *pfn_to_dma_pte(struct dmar_domain *domain,
 			break;
 
 		if (!dma_pte_present(pte)) {
-			uint64_t pteval;
+			phys_addr_t pteval;
 
 			tmp_page = alloc_pgtable_page(domain->nid);
 
@@ -901,7 +923,8 @@  static struct dma_pte *pfn_to_dma_pte(struct dmar_domain *domain,
 				return NULL;
 
 			domain_flush_cache(domain, tmp_page, VTD_PAGE_SIZE);
-			pteval = ((uint64_t)virt_to_dma_pfn(tmp_page) << VTD_PAGE_SHIFT) | DMA_PTE_READ | DMA_PTE_WRITE;
+			pteval = (virt_to_dma_pfn(tmp_page) << VTD_PAGE_SHIFT) | DMA_PTE_READ | DMA_PTE_WRITE;
+			set_pte_mktme_keyid(virt_to_dma_pfn(tmp_page), &pteval);
 			if (cmpxchg64(&pte->val, 0ULL, pteval))
 				/* Someone else set it while we were thinking; use theirs. */
 				free_pgtable_page(tmp_page);
@@ -2214,6 +2237,8 @@  static int __domain_mapping(struct dmar_domain *domain, unsigned long iov_pfn,
 			}
 
 		}
+		set_pte_mktme_keyid(phys_pfn, &pteval);
+
 		/* We don't need lock here, nobody else
 		 * touches the iova range
 		 */
diff --git a/include/linux/intel-iommu.h b/include/linux/intel-iommu.h
index f2ae8a006ff8..8fbb9353d5a6 100644
--- a/include/linux/intel-iommu.h
+++ b/include/linux/intel-iommu.h
@@ -22,6 +22,8 @@ 
 
 #include <asm/cacheflush.h>
 #include <asm/iommu.h>
+#include <asm/page.h>
+
 
 /*
  * VT-d hardware uses 4KiB page size regardless of host page size.
@@ -608,7 +610,12 @@  static inline void dma_clear_pte(struct dma_pte *pte)
 static inline u64 dma_pte_addr(struct dma_pte *pte)
 {
 #ifdef CONFIG_64BIT
-	return pte->val & VTD_PAGE_MASK;
+	u64 addr = pte->val;
+	addr &= VTD_PAGE_MASK;
+#ifdef CONFIG_X86_INTEL_MKTME
+	addr &= ~mktme_keyid_mask();
+#endif
+	return addr;
 #else
 	/* Must have a full atomic 64-bit read */
 	return  __cmpxchg64(&pte->val, 0ULL, 0ULL) & VTD_PAGE_MASK;