| Message ID | 20200221080942.10334-1-borntraeger@de.ibm.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | None | expand |
On 21.02.20 09:09, Christian Borntraeger wrote: > From: Ulrich Weigand <Ulrich.Weigand@de.ibm.com> > > The adapter interrupt page containing the indicator bits is currently > pinned. That means that a guest with many devices can pin a lot of > memory pages in the host. This also complicates the reference tracking > which is needed for memory management handling of protected virtual > machines. It might also have some strange side effects for madvise > MADV_DONTNEED and other things. > > We can simply try to get the userspace page set the bits and free the > page. By storing the userspace address in the irq routing entry instead > of the guest address we can actually avoid many lookups and list walks > so that this variant is very likely not slower. > > If userspace messes around with the memory slots the worst thing that > can happen is that we write to some other memory within that process. > As we get the the page with FOLL_WRITE this can also not be used to > write to shared read-only pages. > > Signed-off-by: Ulrich Weigand <Ulrich.Weigand@de.ibm.com> > [borntraeger@de.ibm.com: patch simplification] > Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> > --- > Documentation/virt/kvm/devices/s390_flic.rst | 11 +- > arch/s390/include/asm/kvm_host.h | 3 - > arch/s390/kvm/interrupt.c | 172 ++++++------------- > 3 files changed, 52 insertions(+), 134 deletions(-) > > diff --git a/Documentation/virt/kvm/devices/s390_flic.rst b/Documentation/virt/kvm/devices/s390_flic.rst > index 954190da7d04..ea96559ba501 100644 > --- a/Documentation/virt/kvm/devices/s390_flic.rst > +++ b/Documentation/virt/kvm/devices/s390_flic.rst > @@ -108,16 +108,9 @@ Groups: > mask or unmask the adapter, as specified in mask > > KVM_S390_IO_ADAPTER_MAP > - perform a gmap translation for the guest address provided in addr, > - pin a userspace page for the translated address and add it to the > - list of mappings > - > - .. note:: A new mapping will be created unconditionally; therefore, > - the calling code should avoid making duplicate mappings. > - > + This is now a no-op. The mapping is purely done by the irq route. > KVM_S390_IO_ADAPTER_UNMAP > - release a userspace page for the translated address specified in addr > - from the list of mappings > + This is now a no-op. The mapping is purely done by the irq route. > > KVM_DEV_FLIC_AISM > modify the adapter-interruption-suppression mode for a given isc if the > diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h > index 1726224e7772..d058289385a5 100644 > --- a/arch/s390/include/asm/kvm_host.h > +++ b/arch/s390/include/asm/kvm_host.h > @@ -701,9 +701,6 @@ struct s390_io_adapter { > bool masked; > bool swap; > bool suppressible; > - struct rw_semaphore maps_lock; > - struct list_head maps; > - atomic_t nr_maps; > }; > > #define MAX_S390_IO_ADAPTERS ((MAX_ISC + 1) * 8) > diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c > index c06c89d370a7..50ccadaf4953 100644 > --- a/arch/s390/kvm/interrupt.c > +++ b/arch/s390/kvm/interrupt.c > @@ -2,7 +2,7 @@ > /* > * handling kvm guest interrupts > * > - * Copyright IBM Corp. 2008, 2015 > + * Copyright IBM Corp. 2008, 2020 > * > * Author(s): Carsten Otte <cotte@de.ibm.com> > */ > @@ -2327,9 +2327,6 @@ static int register_io_adapter(struct kvm_device *dev, > if (!adapter) > return -ENOMEM; > > - INIT_LIST_HEAD(&adapter->maps); > - init_rwsem(&adapter->maps_lock); > - atomic_set(&adapter->nr_maps, 0); > adapter->id = adapter_info.id; > adapter->isc = adapter_info.isc; > adapter->maskable = adapter_info.maskable; > @@ -2354,87 +2351,12 @@ int kvm_s390_mask_adapter(struct kvm *kvm, unsigned int id, bool masked) > return ret; > } > > -static int kvm_s390_adapter_map(struct kvm *kvm, unsigned int id, __u64 addr) > -{ > - struct s390_io_adapter *adapter = get_io_adapter(kvm, id); > - struct s390_map_info *map; > - int ret; > - > - if (!adapter || !addr) > - return -EINVAL; > - > - map = kzalloc(sizeof(*map), GFP_KERNEL); > - if (!map) { > - ret = -ENOMEM; > - goto out; > - } > - INIT_LIST_HEAD(&map->list); > - map->guest_addr = addr; > - map->addr = gmap_translate(kvm->arch.gmap, addr); > - if (map->addr == -EFAULT) { > - ret = -EFAULT; > - goto out; > - } > - ret = get_user_pages_fast(map->addr, 1, FOLL_WRITE, &map->page); > - if (ret < 0) > - goto out; > - BUG_ON(ret != 1); > - down_write(&adapter->maps_lock); > - if (atomic_inc_return(&adapter->nr_maps) < MAX_S390_ADAPTER_MAPS) { > - list_add_tail(&map->list, &adapter->maps); > - ret = 0; > - } else { > - put_page(map->page); > - ret = -EINVAL; > - } > - up_write(&adapter->maps_lock); > -out: > - if (ret) > - kfree(map); > - return ret; > -} > - > -static int kvm_s390_adapter_unmap(struct kvm *kvm, unsigned int id, __u64 addr) > -{ > - struct s390_io_adapter *adapter = get_io_adapter(kvm, id); > - struct s390_map_info *map, *tmp; > - int found = 0; > - > - if (!adapter || !addr) > - return -EINVAL; > - > - down_write(&adapter->maps_lock); > - list_for_each_entry_safe(map, tmp, &adapter->maps, list) { > - if (map->guest_addr == addr) { > - found = 1; > - atomic_dec(&adapter->nr_maps); > - list_del(&map->list); > - put_page(map->page); > - kfree(map); > - break; > - } > - } > - up_write(&adapter->maps_lock); > - > - return found ? 0 : -EINVAL; > -} > - > void kvm_s390_destroy_adapters(struct kvm *kvm) > { > int i; > - struct s390_map_info *map, *tmp; > > - for (i = 0; i < MAX_S390_IO_ADAPTERS; i++) { > - if (!kvm->arch.adapters[i]) > - continue; > - list_for_each_entry_safe(map, tmp, > - &kvm->arch.adapters[i]->maps, list) { > - list_del(&map->list); > - put_page(map->page); > - kfree(map); > - } > + for (i = 0; i < MAX_S390_IO_ADAPTERS; i++) > kfree(kvm->arch.adapters[i]); > - } > } > > static int modify_io_adapter(struct kvm_device *dev, > @@ -2456,12 +2378,13 @@ static int modify_io_adapter(struct kvm_device *dev, > if (ret > 0) > ret = 0; > break; > + /* > + * We resolve the gpa to hva when setting the IRQ routing. the set_irq > + * code uses get_user_pages_remote() to do the actual write. > + */ > case KVM_S390_IO_ADAPTER_MAP: > - ret = kvm_s390_adapter_map(dev->kvm, req.id, req.addr); > - break; > case KVM_S390_IO_ADAPTER_UNMAP: > - ret = kvm_s390_adapter_unmap(dev->kvm, req.id, req.addr); > - break; > + return 0; > default: > ret = -EINVAL; > } > @@ -2699,19 +2622,17 @@ static unsigned long get_ind_bit(__u64 addr, unsigned long bit_nr, bool swap) > return swap ? (bit ^ (BITS_PER_LONG - 1)) : bit; > } > > -static struct s390_map_info *get_map_info(struct s390_io_adapter *adapter, > - u64 addr) > +static struct page *get_map_page(struct kvm *kvm, > + struct s390_io_adapter *adapter, > + u64 uaddr) > { > - struct s390_map_info *map; > - > - if (!adapter) > - return NULL; > + struct page *page = NULL; > > - list_for_each_entry(map, &adapter->maps, list) { > - if (map->guest_addr == addr) > - return map; > - } > - return NULL; > + down_read(&kvm->mm->mmap_sem); > + get_user_pages_remote(NULL, kvm->mm, uaddr, 1, FOLL_WRITE, > + &page, NULL, NULL); > + up_read(&kvm->mm->mmap_sem); > + return page; > } > > static int adapter_indicators_set(struct kvm *kvm, > @@ -2720,30 +2641,35 @@ static int adapter_indicators_set(struct kvm *kvm, > { > unsigned long bit; > int summary_set, idx; > - struct s390_map_info *info; > + struct page *ind_page, *summary_page; > void *map; > > - info = get_map_info(adapter, adapter_int->ind_addr); > - if (!info) > + ind_page = get_map_page(kvm, adapter, adapter_int->ind_addr); > + if (!ind_page) > return -1; > - map = page_address(info->page); > - bit = get_ind_bit(info->addr, adapter_int->ind_offset, adapter->swap); > - set_bit(bit, map); > - idx = srcu_read_lock(&kvm->srcu); > - mark_page_dirty(kvm, info->guest_addr >> PAGE_SHIFT); > - set_page_dirty_lock(info->page); > - info = get_map_info(adapter, adapter_int->summary_addr); > - if (!info) { > - srcu_read_unlock(&kvm->srcu, idx); > + summary_page = get_map_page(kvm, adapter, adapter_int->summary_addr); > + if (!summary_page) { > + put_page(ind_page); > return -1; > } > - map = page_address(info->page); > - bit = get_ind_bit(info->addr, adapter_int->summary_offset, > - adapter->swap); > + > + idx = srcu_read_lock(&kvm->srcu); > + map = page_address(ind_page); > + bit = get_ind_bit(adapter_int->ind_addr, > + adapter_int->ind_offset, adapter->swap); > + set_bit(bit, map); > + mark_page_dirty(kvm, adapter_int->ind_addr >> PAGE_SHIFT); > + set_page_dirty_lock(ind_page); > + map = page_address(summary_page); > + bit = get_ind_bit(adapter_int->summary_addr, > + adapter_int->summary_offset, adapter->swap); > summary_set = test_and_set_bit(bit, map); > - mark_page_dirty(kvm, info->guest_addr >> PAGE_SHIFT); > - set_page_dirty_lock(info->page); > + mark_page_dirty(kvm, adapter_int->summary_addr >> PAGE_SHIFT); > + set_page_dirty_lock(summary_page); > srcu_read_unlock(&kvm->srcu, idx); > + > + put_page(ind_page); > + put_page(summary_page); > return summary_set ? 0 : 1; > } > > @@ -2765,9 +2691,7 @@ static int set_adapter_int(struct kvm_kernel_irq_routing_entry *e, > adapter = get_io_adapter(kvm, e->adapter.adapter_id); > if (!adapter) > return -1; > - down_read(&adapter->maps_lock); > ret = adapter_indicators_set(kvm, adapter, &e->adapter); > - up_read(&adapter->maps_lock); > if ((ret > 0) && !adapter->masked) { > ret = kvm_s390_inject_airq(kvm, adapter); > if (ret == 0) > @@ -2818,23 +2742,27 @@ int kvm_set_routing_entry(struct kvm *kvm, > struct kvm_kernel_irq_routing_entry *e, > const struct kvm_irq_routing_entry *ue) > { > - int ret; > + u64 uaddr; > > switch (ue->type) { > + /* we store the userspace addresses instead of the guest addresses */ > case KVM_IRQ_ROUTING_S390_ADAPTER: > e->set = set_adapter_int; > - e->adapter.summary_addr = ue->u.adapter.summary_addr; > - e->adapter.ind_addr = ue->u.adapter.ind_addr; > + uaddr = gmap_translate(kvm->arch.gmap, ue->u.adapter.summary_addr); > + if (uaddr == -EFAULT) > + return -EFAULT; > + e->adapter.summary_addr = uaddr; > + uaddr = gmap_translate(kvm->arch.gmap, ue->u.adapter.ind_addr); > + if (uaddr == -EFAULT) > + return -EFAULT; > + e->adapter.ind_addr = uaddr; > e->adapter.summary_offset = ue->u.adapter.summary_offset; > e->adapter.ind_offset = ue->u.adapter.ind_offset; > e->adapter.adapter_id = ue->u.adapter.adapter_id; > - ret = 0; > - break; > + return 0; > default: > - ret = -EINVAL; > + return -EINVAL; > } > - > - return ret; > } > > int kvm_set_msi(struct kvm_kernel_irq_routing_entry *e, struct kvm *kvm, > Acked-by: David Hildenbrand <david@redhat.com>
On Fri, 21 Feb 2020 03:09:42 -0500 Christian Borntraeger <borntraeger@de.ibm.com> wrote: > From: Ulrich Weigand <Ulrich.Weigand@de.ibm.com> > > The adapter interrupt page containing the indicator bits is currently > pinned. That means that a guest with many devices can pin a lot of > memory pages in the host. This also complicates the reference tracking > which is needed for memory management handling of protected virtual > machines. It might also have some strange side effects for madvise > MADV_DONTNEED and other things. > > We can simply try to get the userspace page set the bits and free the > page. By storing the userspace address in the irq routing entry instead > of the guest address we can actually avoid many lookups and list walks > so that this variant is very likely not slower. > > If userspace messes around with the memory slots the worst thing that > can happen is that we write to some other memory within that process. > As we get the the page with FOLL_WRITE this can also not be used to > write to shared read-only pages. > > Signed-off-by: Ulrich Weigand <Ulrich.Weigand@de.ibm.com> > [borntraeger@de.ibm.com: patch simplification] > Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> > --- > Documentation/virt/kvm/devices/s390_flic.rst | 11 +- > arch/s390/include/asm/kvm_host.h | 3 - > arch/s390/kvm/interrupt.c | 172 ++++++------------- > 3 files changed, 52 insertions(+), 134 deletions(-) (...) > @@ -2456,12 +2378,13 @@ static int modify_io_adapter(struct kvm_device *dev, > if (ret > 0) > ret = 0; > break; > + /* > + * We resolve the gpa to hva when setting the IRQ routing. the set_irq > + * code uses get_user_pages_remote() to do the actual write. > + */ What about: "The following operations are no longer needed and therefore no-ops. The gpa to hva translation is done when an IRQ route is set up. The set_irq code uses get_user_pages_remote() to do the actual write." > case KVM_S390_IO_ADAPTER_MAP: > - ret = kvm_s390_adapter_map(dev->kvm, req.id, req.addr); > - break; > case KVM_S390_IO_ADAPTER_UNMAP: > - ret = kvm_s390_adapter_unmap(dev->kvm, req.id, req.addr); > - break; > + return 0; I think ret = 0; break; would be better, as the other cases do not do a direct return, either. > default: > ret = -EINVAL; > } > @@ -2699,19 +2622,17 @@ static unsigned long get_ind_bit(__u64 addr, unsigned long bit_nr, bool swap) > return swap ? (bit ^ (BITS_PER_LONG - 1)) : bit; > } > > -static struct s390_map_info *get_map_info(struct s390_io_adapter *adapter, > - u64 addr) > +static struct page *get_map_page(struct kvm *kvm, > + struct s390_io_adapter *adapter, adapter seems to be unused in this function now? Should we remove it from the parameter list? > + u64 uaddr) > { > - struct s390_map_info *map; > - > - if (!adapter) > - return NULL; > + struct page *page = NULL; > > - list_for_each_entry(map, &adapter->maps, list) { > - if (map->guest_addr == addr) > - return map; > - } > - return NULL; > + down_read(&kvm->mm->mmap_sem); > + get_user_pages_remote(NULL, kvm->mm, uaddr, 1, FOLL_WRITE, > + &page, NULL, NULL); > + up_read(&kvm->mm->mmap_sem); > + return page; > } > > static int adapter_indicators_set(struct kvm *kvm, > @@ -2720,30 +2641,35 @@ static int adapter_indicators_set(struct kvm *kvm, > { > unsigned long bit; > int summary_set, idx; > - struct s390_map_info *info; > + struct page *ind_page, *summary_page; > void *map; > > - info = get_map_info(adapter, adapter_int->ind_addr); > - if (!info) > + ind_page = get_map_page(kvm, adapter, adapter_int->ind_addr); > + if (!ind_page) > return -1; > - map = page_address(info->page); > - bit = get_ind_bit(info->addr, adapter_int->ind_offset, adapter->swap); > - set_bit(bit, map); > - idx = srcu_read_lock(&kvm->srcu); > - mark_page_dirty(kvm, info->guest_addr >> PAGE_SHIFT); > - set_page_dirty_lock(info->page); > - info = get_map_info(adapter, adapter_int->summary_addr); > - if (!info) { > - srcu_read_unlock(&kvm->srcu, idx); > + summary_page = get_map_page(kvm, adapter, adapter_int->summary_addr); > + if (!summary_page) { > + put_page(ind_page); > return -1; > } > - map = page_address(info->page); > - bit = get_ind_bit(info->addr, adapter_int->summary_offset, > - adapter->swap); > + > + idx = srcu_read_lock(&kvm->srcu); > + map = page_address(ind_page); > + bit = get_ind_bit(adapter_int->ind_addr, > + adapter_int->ind_offset, adapter->swap); > + set_bit(bit, map); > + mark_page_dirty(kvm, adapter_int->ind_addr >> PAGE_SHIFT); > + set_page_dirty_lock(ind_page); > + map = page_address(summary_page); > + bit = get_ind_bit(adapter_int->summary_addr, > + adapter_int->summary_offset, adapter->swap); > summary_set = test_and_set_bit(bit, map); > - mark_page_dirty(kvm, info->guest_addr >> PAGE_SHIFT); > - set_page_dirty_lock(info->page); > + mark_page_dirty(kvm, adapter_int->summary_addr >> PAGE_SHIFT); > + set_page_dirty_lock(summary_page); > srcu_read_unlock(&kvm->srcu, idx); > + > + put_page(ind_page); > + put_page(summary_page); > return summary_set ? 0 : 1; > } > > @@ -2765,9 +2691,7 @@ static int set_adapter_int(struct kvm_kernel_irq_routing_entry *e, > adapter = get_io_adapter(kvm, e->adapter.adapter_id); > if (!adapter) > return -1; > - down_read(&adapter->maps_lock); > ret = adapter_indicators_set(kvm, adapter, &e->adapter); > - up_read(&adapter->maps_lock); > if ((ret > 0) && !adapter->masked) { > ret = kvm_s390_inject_airq(kvm, adapter); > if (ret == 0) > @@ -2818,23 +2742,27 @@ int kvm_set_routing_entry(struct kvm *kvm, > struct kvm_kernel_irq_routing_entry *e, > const struct kvm_irq_routing_entry *ue) > { > - int ret; > + u64 uaddr; > > switch (ue->type) { > + /* we store the userspace addresses instead of the guest addresses */ > case KVM_IRQ_ROUTING_S390_ADAPTER: > e->set = set_adapter_int; > - e->adapter.summary_addr = ue->u.adapter.summary_addr; > - e->adapter.ind_addr = ue->u.adapter.ind_addr; > + uaddr = gmap_translate(kvm->arch.gmap, ue->u.adapter.summary_addr); > + if (uaddr == -EFAULT) > + return -EFAULT; > + e->adapter.summary_addr = uaddr; > + uaddr = gmap_translate(kvm->arch.gmap, ue->u.adapter.ind_addr); > + if (uaddr == -EFAULT) > + return -EFAULT; > + e->adapter.ind_addr = uaddr; > e->adapter.summary_offset = ue->u.adapter.summary_offset; > e->adapter.ind_offset = ue->u.adapter.ind_offset; > e->adapter.adapter_id = ue->u.adapter.adapter_id; > - ret = 0; > - break; > + return 0; > default: > - ret = -EINVAL; > + return -EINVAL; > } > - > - return ret; > } > > int kvm_set_msi(struct kvm_kernel_irq_routing_entry *e, struct kvm *kvm,
On 21.02.20 11:41, Cornelia Huck wrote: > On Fri, 21 Feb 2020 03:09:42 -0500 > Christian Borntraeger <borntraeger@de.ibm.com> wrote: > >> From: Ulrich Weigand <Ulrich.Weigand@de.ibm.com> >> >> The adapter interrupt page containing the indicator bits is currently >> pinned. That means that a guest with many devices can pin a lot of >> memory pages in the host. This also complicates the reference tracking >> which is needed for memory management handling of protected virtual >> machines. It might also have some strange side effects for madvise >> MADV_DONTNEED and other things. >> >> We can simply try to get the userspace page set the bits and free the >> page. By storing the userspace address in the irq routing entry instead >> of the guest address we can actually avoid many lookups and list walks >> so that this variant is very likely not slower. >> >> If userspace messes around with the memory slots the worst thing that >> can happen is that we write to some other memory within that process. >> As we get the the page with FOLL_WRITE this can also not be used to >> write to shared read-only pages. >> >> Signed-off-by: Ulrich Weigand <Ulrich.Weigand@de.ibm.com> >> [borntraeger@de.ibm.com: patch simplification] >> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> >> --- >> Documentation/virt/kvm/devices/s390_flic.rst | 11 +- >> arch/s390/include/asm/kvm_host.h | 3 - >> arch/s390/kvm/interrupt.c | 172 ++++++------------- >> 3 files changed, 52 insertions(+), 134 deletions(-) > > (...) > >> @@ -2456,12 +2378,13 @@ static int modify_io_adapter(struct kvm_device *dev, >> if (ret > 0) >> ret = 0; >> break; >> + /* >> + * We resolve the gpa to hva when setting the IRQ routing. the set_irq >> + * code uses get_user_pages_remote() to do the actual write. >> + */ > > What about: > > "The following operations are no longer needed and therefore no-ops. > The gpa to hva translation is done when an IRQ route is set up. The > set_irq code uses get_user_pages_remote() to do the actual write." ack, reads better. > >> case KVM_S390_IO_ADAPTER_MAP: >> - ret = kvm_s390_adapter_map(dev->kvm, req.id, req.addr); >> - break; >> case KVM_S390_IO_ADAPTER_UNMAP: >> - ret = kvm_s390_adapter_unmap(dev->kvm, req.id, req.addr); >> - break; >> + return 0; > > I think > ret = 0; > break; > would be better, as the other cases do not do a direct return, either. fine with me. ack > >> default: >> ret = -EINVAL; >> } >> @@ -2699,19 +2622,17 @@ static unsigned long get_ind_bit(__u64 addr, unsigned long bit_nr, bool swap) >> return swap ? (bit ^ (BITS_PER_LONG - 1)) : bit; >> } >> >> -static struct s390_map_info *get_map_info(struct s390_io_adapter *adapter, >> - u64 addr) >> +static struct page *get_map_page(struct kvm *kvm, >> + struct s390_io_adapter *adapter, > > adapter seems to be unused in this function now? Should we remove it from the parameter list? yep, thanks. removed.
diff --git a/Documentation/virt/kvm/devices/s390_flic.rst b/Documentation/virt/kvm/devices/s390_flic.rst index 954190da7d04..ea96559ba501 100644 --- a/Documentation/virt/kvm/devices/s390_flic.rst +++ b/Documentation/virt/kvm/devices/s390_flic.rst @@ -108,16 +108,9 @@ Groups: mask or unmask the adapter, as specified in mask KVM_S390_IO_ADAPTER_MAP - perform a gmap translation for the guest address provided in addr, - pin a userspace page for the translated address and add it to the - list of mappings - - .. note:: A new mapping will be created unconditionally; therefore, - the calling code should avoid making duplicate mappings. - + This is now a no-op. The mapping is purely done by the irq route. KVM_S390_IO_ADAPTER_UNMAP - release a userspace page for the translated address specified in addr - from the list of mappings + This is now a no-op. The mapping is purely done by the irq route. KVM_DEV_FLIC_AISM modify the adapter-interruption-suppression mode for a given isc if the diff --git a/arch/s390/include/asm/kvm_host.h b/arch/s390/include/asm/kvm_host.h index 1726224e7772..d058289385a5 100644 --- a/arch/s390/include/asm/kvm_host.h +++ b/arch/s390/include/asm/kvm_host.h @@ -701,9 +701,6 @@ struct s390_io_adapter { bool masked; bool swap; bool suppressible; - struct rw_semaphore maps_lock; - struct list_head maps; - atomic_t nr_maps; }; #define MAX_S390_IO_ADAPTERS ((MAX_ISC + 1) * 8) diff --git a/arch/s390/kvm/interrupt.c b/arch/s390/kvm/interrupt.c index c06c89d370a7..50ccadaf4953 100644 --- a/arch/s390/kvm/interrupt.c +++ b/arch/s390/kvm/interrupt.c @@ -2,7 +2,7 @@ /* * handling kvm guest interrupts * - * Copyright IBM Corp. 2008, 2015 + * Copyright IBM Corp. 2008, 2020 * * Author(s): Carsten Otte <cotte@de.ibm.com> */ @@ -2327,9 +2327,6 @@ static int register_io_adapter(struct kvm_device *dev, if (!adapter) return -ENOMEM; - INIT_LIST_HEAD(&adapter->maps); - init_rwsem(&adapter->maps_lock); - atomic_set(&adapter->nr_maps, 0); adapter->id = adapter_info.id; adapter->isc = adapter_info.isc; adapter->maskable = adapter_info.maskable; @@ -2354,87 +2351,12 @@ int kvm_s390_mask_adapter(struct kvm *kvm, unsigned int id, bool masked) return ret; } -static int kvm_s390_adapter_map(struct kvm *kvm, unsigned int id, __u64 addr) -{ - struct s390_io_adapter *adapter = get_io_adapter(kvm, id); - struct s390_map_info *map; - int ret; - - if (!adapter || !addr) - return -EINVAL; - - map = kzalloc(sizeof(*map), GFP_KERNEL); - if (!map) { - ret = -ENOMEM; - goto out; - } - INIT_LIST_HEAD(&map->list); - map->guest_addr = addr; - map->addr = gmap_translate(kvm->arch.gmap, addr); - if (map->addr == -EFAULT) { - ret = -EFAULT; - goto out; - } - ret = get_user_pages_fast(map->addr, 1, FOLL_WRITE, &map->page); - if (ret < 0) - goto out; - BUG_ON(ret != 1); - down_write(&adapter->maps_lock); - if (atomic_inc_return(&adapter->nr_maps) < MAX_S390_ADAPTER_MAPS) { - list_add_tail(&map->list, &adapter->maps); - ret = 0; - } else { - put_page(map->page); - ret = -EINVAL; - } - up_write(&adapter->maps_lock); -out: - if (ret) - kfree(map); - return ret; -} - -static int kvm_s390_adapter_unmap(struct kvm *kvm, unsigned int id, __u64 addr) -{ - struct s390_io_adapter *adapter = get_io_adapter(kvm, id); - struct s390_map_info *map, *tmp; - int found = 0; - - if (!adapter || !addr) - return -EINVAL; - - down_write(&adapter->maps_lock); - list_for_each_entry_safe(map, tmp, &adapter->maps, list) { - if (map->guest_addr == addr) { - found = 1; - atomic_dec(&adapter->nr_maps); - list_del(&map->list); - put_page(map->page); - kfree(map); - break; - } - } - up_write(&adapter->maps_lock); - - return found ? 0 : -EINVAL; -} - void kvm_s390_destroy_adapters(struct kvm *kvm) { int i; - struct s390_map_info *map, *tmp; - for (i = 0; i < MAX_S390_IO_ADAPTERS; i++) { - if (!kvm->arch.adapters[i]) - continue; - list_for_each_entry_safe(map, tmp, - &kvm->arch.adapters[i]->maps, list) { - list_del(&map->list); - put_page(map->page); - kfree(map); - } + for (i = 0; i < MAX_S390_IO_ADAPTERS; i++) kfree(kvm->arch.adapters[i]); - } } static int modify_io_adapter(struct kvm_device *dev, @@ -2456,12 +2378,13 @@ static int modify_io_adapter(struct kvm_device *dev, if (ret > 0) ret = 0; break; + /* + * We resolve the gpa to hva when setting the IRQ routing. the set_irq + * code uses get_user_pages_remote() to do the actual write. + */ case KVM_S390_IO_ADAPTER_MAP: - ret = kvm_s390_adapter_map(dev->kvm, req.id, req.addr); - break; case KVM_S390_IO_ADAPTER_UNMAP: - ret = kvm_s390_adapter_unmap(dev->kvm, req.id, req.addr); - break; + return 0; default: ret = -EINVAL; } @@ -2699,19 +2622,17 @@ static unsigned long get_ind_bit(__u64 addr, unsigned long bit_nr, bool swap) return swap ? (bit ^ (BITS_PER_LONG - 1)) : bit; } -static struct s390_map_info *get_map_info(struct s390_io_adapter *adapter, - u64 addr) +static struct page *get_map_page(struct kvm *kvm, + struct s390_io_adapter *adapter, + u64 uaddr) { - struct s390_map_info *map; - - if (!adapter) - return NULL; + struct page *page = NULL; - list_for_each_entry(map, &adapter->maps, list) { - if (map->guest_addr == addr) - return map; - } - return NULL; + down_read(&kvm->mm->mmap_sem); + get_user_pages_remote(NULL, kvm->mm, uaddr, 1, FOLL_WRITE, + &page, NULL, NULL); + up_read(&kvm->mm->mmap_sem); + return page; } static int adapter_indicators_set(struct kvm *kvm, @@ -2720,30 +2641,35 @@ static int adapter_indicators_set(struct kvm *kvm, { unsigned long bit; int summary_set, idx; - struct s390_map_info *info; + struct page *ind_page, *summary_page; void *map; - info = get_map_info(adapter, adapter_int->ind_addr); - if (!info) + ind_page = get_map_page(kvm, adapter, adapter_int->ind_addr); + if (!ind_page) return -1; - map = page_address(info->page); - bit = get_ind_bit(info->addr, adapter_int->ind_offset, adapter->swap); - set_bit(bit, map); - idx = srcu_read_lock(&kvm->srcu); - mark_page_dirty(kvm, info->guest_addr >> PAGE_SHIFT); - set_page_dirty_lock(info->page); - info = get_map_info(adapter, adapter_int->summary_addr); - if (!info) { - srcu_read_unlock(&kvm->srcu, idx); + summary_page = get_map_page(kvm, adapter, adapter_int->summary_addr); + if (!summary_page) { + put_page(ind_page); return -1; } - map = page_address(info->page); - bit = get_ind_bit(info->addr, adapter_int->summary_offset, - adapter->swap); + + idx = srcu_read_lock(&kvm->srcu); + map = page_address(ind_page); + bit = get_ind_bit(adapter_int->ind_addr, + adapter_int->ind_offset, adapter->swap); + set_bit(bit, map); + mark_page_dirty(kvm, adapter_int->ind_addr >> PAGE_SHIFT); + set_page_dirty_lock(ind_page); + map = page_address(summary_page); + bit = get_ind_bit(adapter_int->summary_addr, + adapter_int->summary_offset, adapter->swap); summary_set = test_and_set_bit(bit, map); - mark_page_dirty(kvm, info->guest_addr >> PAGE_SHIFT); - set_page_dirty_lock(info->page); + mark_page_dirty(kvm, adapter_int->summary_addr >> PAGE_SHIFT); + set_page_dirty_lock(summary_page); srcu_read_unlock(&kvm->srcu, idx); + + put_page(ind_page); + put_page(summary_page); return summary_set ? 0 : 1; } @@ -2765,9 +2691,7 @@ static int set_adapter_int(struct kvm_kernel_irq_routing_entry *e, adapter = get_io_adapter(kvm, e->adapter.adapter_id); if (!adapter) return -1; - down_read(&adapter->maps_lock); ret = adapter_indicators_set(kvm, adapter, &e->adapter); - up_read(&adapter->maps_lock); if ((ret > 0) && !adapter->masked) { ret = kvm_s390_inject_airq(kvm, adapter); if (ret == 0) @@ -2818,23 +2742,27 @@ int kvm_set_routing_entry(struct kvm *kvm, struct kvm_kernel_irq_routing_entry *e, const struct kvm_irq_routing_entry *ue) { - int ret; + u64 uaddr; switch (ue->type) { + /* we store the userspace addresses instead of the guest addresses */ case KVM_IRQ_ROUTING_S390_ADAPTER: e->set = set_adapter_int; - e->adapter.summary_addr = ue->u.adapter.summary_addr; - e->adapter.ind_addr = ue->u.adapter.ind_addr; + uaddr = gmap_translate(kvm->arch.gmap, ue->u.adapter.summary_addr); + if (uaddr == -EFAULT) + return -EFAULT; + e->adapter.summary_addr = uaddr; + uaddr = gmap_translate(kvm->arch.gmap, ue->u.adapter.ind_addr); + if (uaddr == -EFAULT) + return -EFAULT; + e->adapter.ind_addr = uaddr; e->adapter.summary_offset = ue->u.adapter.summary_offset; e->adapter.ind_offset = ue->u.adapter.ind_offset; e->adapter.adapter_id = ue->u.adapter.adapter_id; - ret = 0; - break; + return 0; default: - ret = -EINVAL; + return -EINVAL; } - - return ret; } int kvm_set_msi(struct kvm_kernel_irq_routing_entry *e, struct kvm *kvm,