Message ID | 20200310145410.26308-14-eric.auger@redhat.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | arm/arm64: Add ITS tests | expand |
Hi Eric, On 2020/3/10 22:54, Eric Auger wrote: > Add two new migration tests. One testing the migration of > a topology where collection were unmapped. The second test > checks the migration of the pending table. > > Signed-off-by: Eric Auger <eric.auger@redhat.com> > > --- > > v4 -> v5: > - move stub from header to arm/gic.c > > v3 -> v4: > - do not talk about odd/even CPUs, use pe0 and pe1 > - comment the delay > > v2 -> v3: > - tests belong to both its and migration groups > - use LPI(i) > - gicv3_lpi_set_pending_table_bit renamed into gicv3_lpi_set_clr_pending > --- > arm/gic.c | 146 ++++++++++++++++++++++++++++++++++++++++++++++ > arm/unittests.cfg | 16 +++++ > 2 files changed, 162 insertions(+) > > diff --git a/arm/gic.c b/arm/gic.c > index b8fbc13..e6ffbc3 100644 > --- a/arm/gic.c > +++ b/arm/gic.c > @@ -193,6 +193,7 @@ static void lpi_handler(struct pt_regs *regs __unused) > smp_rmb(); /* pairs with wmb in lpi_stats_expect */ > lpi_stats.observed.cpu_id = smp_processor_id(); > lpi_stats.observed.lpi_id = irqnr; > + acked[lpi_stats.observed.cpu_id]++; > smp_wmb(); /* pairs with rmb in check_lpi_stats */ > } > > @@ -236,6 +237,22 @@ static void secondary_lpi_test(void) > while (1) > wfi(); > } > + > +static void check_lpi_hits(int *expected, const char *msg) > +{ > + bool pass = true; > + int i; > + > + for (i = 0; i < nr_cpus; i++) { > + if (acked[i] != expected[i]) { > + report_info("expected %d LPIs on PE #%d, %d observed", > + expected[i], i, acked[i]); > + pass = false; > + break; > + } > + } > + report(pass, "%s", msg); > +} > #endif > > static void gicv2_ipi_send_self(void) > @@ -591,6 +608,8 @@ static void gic_test_mmio(void) > static void test_its_introspection(void) {} > static void test_its_trigger(void) {} > static void test_its_migration(void) {} > +static void test_its_pending_migration(void) {} > +static void test_migrate_unmapped_collection(void) {} > > #else /* __aarch64__ */ > > @@ -659,6 +678,17 @@ static int its_prerequisites(int nb_cpus) > return 0; > } > > +static void set_lpi(struct its_device *dev, u32 eventid, u32 physid, > + struct its_collection *col) > +{ > + assert(dev && col); > + > + its_send_mapti(dev, physid, eventid, col); > + > + gicv3_lpi_set_config(physid, LPI_PROP_DEFAULT); > + its_send_invall(col); Again, the col hasn't been mapped currently. > +} > + > /* > * Setup the configuration for those mappings: > * dev_id=2 event=20 -> vcpu 3, intid=8195 > @@ -799,6 +829,114 @@ static void test_its_migration(void) > its_send_int(dev7, 255); > check_lpi_stats("dev7/eventid=255 triggers LPI 8196 on PE #2 after migration"); > } > + > +static void test_migrate_unmapped_collection(void) > +{ > + struct its_collection *col; > + struct its_device *dev2, *dev7; > + int pe0 = nr_cpus - 1; > + u8 config; > + > + if (its_setup1()) > + return; > + > + col = its_create_collection(pe0, pe0); > + dev2 = its_get_device(2); > + dev7 = its_get_device(7); > + > + /* MAPTI with the collection unmapped */ > + set_lpi(dev2, 0, 8192, col); > + > + puts("Now migrate the VM, then press a key to continue...\n"); > + (void)getchar(); > + report_info("Migration complete"); > + > + /* on the destination, map the collection */ > + its_send_mapc(col, true); > + > + lpi_stats_expect(2, 8196); > + its_send_int(dev7, 255); > + check_lpi_stats("dev7/eventid= 255 triggered LPI 8196 on PE #2"); > + > + config = gicv3_lpi_get_config(8192); > + report(config == LPI_PROP_DEFAULT, > + "Config of LPI 8192 was properly migrated"); > + > + lpi_stats_expect(pe0, 8192); > + its_send_int(dev2, 0); > + check_lpi_stats("dev2/eventid = 0 triggered LPI 8192 on PE0"); > + > + /* unmap the collection */ > + its_send_mapc(col, false); Again, behavior is unpredictable. > + > + lpi_stats_expect(-1, -1); > + its_send_int(dev2, 0); > + check_lpi_stats("no LPI triggered after collection unmapping"); > +} > + > +static void test_its_pending_migration(void) > +{ > + struct its_device *dev; > + struct its_collection *collection[2]; > + int *expected = malloc(nr_cpus * sizeof(int)); > + int pe0 = nr_cpus - 1, pe1 = nr_cpus - 2; > + u64 pendbaser; > + void *ptr; > + int i; > + > + if (its_prerequisites(4)) > + return; > + > + dev = its_create_device(2 /* dev id */, 8 /* nb_ites */); > + its_send_mapd(dev, true); > + > + collection[0] = its_create_collection(pe0, pe0); > + collection[1] = its_create_collection(pe1, pe1); > + its_send_mapc(collection[0], true); > + its_send_mapc(collection[1], true); > + > + /* disable lpi at redist level */ > + gicv3_lpi_rdist_disable(pe0); > + gicv3_lpi_rdist_disable(pe1); > + > + /* lpis are interleaved inbetween the 2 PEs */ > + for (i = 0; i < 256; i++) { > + struct its_collection *col = i % 2 ? collection[0] : > + collection[1]; > + int vcpu = col->target_address >> 16; > + > + its_send_mapti(dev, LPI(i), i, col); > + gicv3_lpi_set_config(LPI(i), LPI_PROP_DEFAULT); > + gicv3_lpi_set_clr_pending(vcpu, LPI(i), true); > + } > + its_send_invall(collection[0]); > + its_send_invall(collection[1]); > + > + /* Set the PTZ bit on each pendbaser */ 'Clear' the PTZ. Otherwise looks good! > + > + expected[pe0] = 128; > + expected[pe1] = 128; > + > + ptr = gicv3_data.redist_base[pe0] + GICR_PENDBASER; > + pendbaser = readq(ptr); > + writeq(pendbaser & ~GICR_PENDBASER_PTZ, ptr); > + > + ptr = gicv3_data.redist_base[pe1] + GICR_PENDBASER; > + pendbaser = readq(ptr); > + writeq(pendbaser & ~GICR_PENDBASER_PTZ, ptr); > + > + gicv3_lpi_rdist_enable(pe0); > + gicv3_lpi_rdist_enable(pe1); > + > + puts("Now migrate the VM, then press a key to continue...\n"); > + (void)getchar(); > + report_info("Migration complete"); > + > + /* let's wait for the 256 LPIs to be handled */ > + mdelay(1000); > + > + check_lpi_hits(expected, "128 LPIs on both PE0 and PE1 after migration"); > +} Thanks, Zenghui
On 3/11/20 1:07 PM, Zenghui Yu wrote: > Hi Eric, > > On 2020/3/10 22:54, Eric Auger wrote: >> Add two new migration tests. One testing the migration of >> a topology where collection were unmapped. The second test >> checks the migration of the pending table. >> >> Signed-off-by: Eric Auger <eric.auger@redhat.com> >> >> --- >> >> v4 -> v5: >> - move stub from header to arm/gic.c >> >> v3 -> v4: >> - do not talk about odd/even CPUs, use pe0 and pe1 >> - comment the delay >> >> v2 -> v3: >> - tests belong to both its and migration groups >> - use LPI(i) >> - gicv3_lpi_set_pending_table_bit renamed into gicv3_lpi_set_clr_pending >> --- >> arm/gic.c | 146 ++++++++++++++++++++++++++++++++++++++++++++++ >> arm/unittests.cfg | 16 +++++ >> 2 files changed, 162 insertions(+) >> >> diff --git a/arm/gic.c b/arm/gic.c >> index b8fbc13..e6ffbc3 100644 >> --- a/arm/gic.c >> +++ b/arm/gic.c >> @@ -193,6 +193,7 @@ static void lpi_handler(struct pt_regs *regs >> __unused) >> smp_rmb(); /* pairs with wmb in lpi_stats_expect */ >> lpi_stats.observed.cpu_id = smp_processor_id(); >> lpi_stats.observed.lpi_id = irqnr; >> + acked[lpi_stats.observed.cpu_id]++; >> smp_wmb(); /* pairs with rmb in check_lpi_stats */ >> } >> @@ -236,6 +237,22 @@ static void secondary_lpi_test(void) >> while (1) >> wfi(); >> } >> + >> +static void check_lpi_hits(int *expected, const char *msg) >> +{ >> + bool pass = true; >> + int i; >> + >> + for (i = 0; i < nr_cpus; i++) { >> + if (acked[i] != expected[i]) { >> + report_info("expected %d LPIs on PE #%d, %d observed", >> + expected[i], i, acked[i]); >> + pass = false; >> + break; >> + } >> + } >> + report(pass, "%s", msg); >> +} >> #endif >> static void gicv2_ipi_send_self(void) >> @@ -591,6 +608,8 @@ static void gic_test_mmio(void) >> static void test_its_introspection(void) {} >> static void test_its_trigger(void) {} >> static void test_its_migration(void) {} >> +static void test_its_pending_migration(void) {} >> +static void test_migrate_unmapped_collection(void) {} >> #else /* __aarch64__ */ >> @@ -659,6 +678,17 @@ static int its_prerequisites(int nb_cpus) >> return 0; >> } >> +static void set_lpi(struct its_device *dev, u32 eventid, u32 physid, >> + struct its_collection *col) >> +{ >> + assert(dev && col); >> + >> + its_send_mapti(dev, physid, eventid, col); >> + >> + gicv3_lpi_set_config(physid, LPI_PROP_DEFAULT); >> + its_send_invall(col); > > Again, the col hasn't been mapped currently. right. Moving it outside of the helper then > >> +} >> + >> /* >> * Setup the configuration for those mappings: >> * dev_id=2 event=20 -> vcpu 3, intid=8195 >> @@ -799,6 +829,114 @@ static void test_its_migration(void) >> its_send_int(dev7, 255); >> check_lpi_stats("dev7/eventid=255 triggers LPI 8196 on PE #2 >> after migration"); >> } >> + >> +static void test_migrate_unmapped_collection(void) >> +{ >> + struct its_collection *col; >> + struct its_device *dev2, *dev7; >> + int pe0 = nr_cpus - 1; >> + u8 config; >> + >> + if (its_setup1()) >> + return; >> + >> + col = its_create_collection(pe0, pe0); >> + dev2 = its_get_device(2); >> + dev7 = its_get_device(7); >> + >> + /* MAPTI with the collection unmapped */ >> + set_lpi(dev2, 0, 8192, col); >> + >> + puts("Now migrate the VM, then press a key to continue...\n"); >> + (void)getchar(); >> + report_info("Migration complete"); >> + >> + /* on the destination, map the collection */ >> + its_send_mapc(col, true); >> + >> + lpi_stats_expect(2, 8196); >> + its_send_int(dev7, 255); >> + check_lpi_stats("dev7/eventid= 255 triggered LPI 8196 on PE #2"); >> + >> + config = gicv3_lpi_get_config(8192); >> + report(config == LPI_PROP_DEFAULT, >> + "Config of LPI 8192 was properly migrated"); >> + >> + lpi_stats_expect(pe0, 8192); >> + its_send_int(dev2, 0); >> + check_lpi_stats("dev2/eventid = 0 triggered LPI 8192 on PE0"); >> + >> + /* unmap the collection */ >> + its_send_mapc(col, false); > > Again, behavior is unpredictable. yep removing that test. > >> + >> + lpi_stats_expect(-1, -1); >> + its_send_int(dev2, 0); >> + check_lpi_stats("no LPI triggered after collection unmapping"); >> +} >> + >> +static void test_its_pending_migration(void) >> +{ >> + struct its_device *dev; >> + struct its_collection *collection[2]; >> + int *expected = malloc(nr_cpus * sizeof(int)); >> + int pe0 = nr_cpus - 1, pe1 = nr_cpus - 2; >> + u64 pendbaser; >> + void *ptr; >> + int i; >> + >> + if (its_prerequisites(4)) >> + return; >> + >> + dev = its_create_device(2 /* dev id */, 8 /* nb_ites */); >> + its_send_mapd(dev, true); >> + >> + collection[0] = its_create_collection(pe0, pe0); >> + collection[1] = its_create_collection(pe1, pe1); >> + its_send_mapc(collection[0], true); >> + its_send_mapc(collection[1], true); >> + >> + /* disable lpi at redist level */ >> + gicv3_lpi_rdist_disable(pe0); >> + gicv3_lpi_rdist_disable(pe1); >> + >> + /* lpis are interleaved inbetween the 2 PEs */ >> + for (i = 0; i < 256; i++) { >> + struct its_collection *col = i % 2 ? collection[0] : >> + collection[1]; >> + int vcpu = col->target_address >> 16; >> + >> + its_send_mapti(dev, LPI(i), i, col); >> + gicv3_lpi_set_config(LPI(i), LPI_PROP_DEFAULT); >> + gicv3_lpi_set_clr_pending(vcpu, LPI(i), true); >> + } >> + its_send_invall(collection[0]); >> + its_send_invall(collection[1]); >> + >> + /* Set the PTZ bit on each pendbaser */ > > 'Clear' the PTZ. yep > > Otherwise looks good! Thank you for your careful review! Best Regards Eric > >> + >> + expected[pe0] = 128; >> + expected[pe1] = 128; >> + >> + ptr = gicv3_data.redist_base[pe0] + GICR_PENDBASER; >> + pendbaser = readq(ptr); >> + writeq(pendbaser & ~GICR_PENDBASER_PTZ, ptr); >> + >> + ptr = gicv3_data.redist_base[pe1] + GICR_PENDBASER; >> + pendbaser = readq(ptr); >> + writeq(pendbaser & ~GICR_PENDBASER_PTZ, ptr); >> + >> + gicv3_lpi_rdist_enable(pe0); >> + gicv3_lpi_rdist_enable(pe1); >> + >> + puts("Now migrate the VM, then press a key to continue...\n"); >> + (void)getchar(); >> + report_info("Migration complete"); >> + >> + /* let's wait for the 256 LPIs to be handled */ >> + mdelay(1000); >> + >> + check_lpi_hits(expected, "128 LPIs on both PE0 and PE1 after >> migration"); >> +} > > Thanks, > Zenghui >
diff --git a/arm/gic.c b/arm/gic.c index b8fbc13..e6ffbc3 100644 --- a/arm/gic.c +++ b/arm/gic.c @@ -193,6 +193,7 @@ static void lpi_handler(struct pt_regs *regs __unused) smp_rmb(); /* pairs with wmb in lpi_stats_expect */ lpi_stats.observed.cpu_id = smp_processor_id(); lpi_stats.observed.lpi_id = irqnr; + acked[lpi_stats.observed.cpu_id]++; smp_wmb(); /* pairs with rmb in check_lpi_stats */ } @@ -236,6 +237,22 @@ static void secondary_lpi_test(void) while (1) wfi(); } + +static void check_lpi_hits(int *expected, const char *msg) +{ + bool pass = true; + int i; + + for (i = 0; i < nr_cpus; i++) { + if (acked[i] != expected[i]) { + report_info("expected %d LPIs on PE #%d, %d observed", + expected[i], i, acked[i]); + pass = false; + break; + } + } + report(pass, "%s", msg); +} #endif static void gicv2_ipi_send_self(void) @@ -591,6 +608,8 @@ static void gic_test_mmio(void) static void test_its_introspection(void) {} static void test_its_trigger(void) {} static void test_its_migration(void) {} +static void test_its_pending_migration(void) {} +static void test_migrate_unmapped_collection(void) {} #else /* __aarch64__ */ @@ -659,6 +678,17 @@ static int its_prerequisites(int nb_cpus) return 0; } +static void set_lpi(struct its_device *dev, u32 eventid, u32 physid, + struct its_collection *col) +{ + assert(dev && col); + + its_send_mapti(dev, physid, eventid, col); + + gicv3_lpi_set_config(physid, LPI_PROP_DEFAULT); + its_send_invall(col); +} + /* * Setup the configuration for those mappings: * dev_id=2 event=20 -> vcpu 3, intid=8195 @@ -799,6 +829,114 @@ static void test_its_migration(void) its_send_int(dev7, 255); check_lpi_stats("dev7/eventid=255 triggers LPI 8196 on PE #2 after migration"); } + +static void test_migrate_unmapped_collection(void) +{ + struct its_collection *col; + struct its_device *dev2, *dev7; + int pe0 = nr_cpus - 1; + u8 config; + + if (its_setup1()) + return; + + col = its_create_collection(pe0, pe0); + dev2 = its_get_device(2); + dev7 = its_get_device(7); + + /* MAPTI with the collection unmapped */ + set_lpi(dev2, 0, 8192, col); + + puts("Now migrate the VM, then press a key to continue...\n"); + (void)getchar(); + report_info("Migration complete"); + + /* on the destination, map the collection */ + its_send_mapc(col, true); + + lpi_stats_expect(2, 8196); + its_send_int(dev7, 255); + check_lpi_stats("dev7/eventid= 255 triggered LPI 8196 on PE #2"); + + config = gicv3_lpi_get_config(8192); + report(config == LPI_PROP_DEFAULT, + "Config of LPI 8192 was properly migrated"); + + lpi_stats_expect(pe0, 8192); + its_send_int(dev2, 0); + check_lpi_stats("dev2/eventid = 0 triggered LPI 8192 on PE0"); + + /* unmap the collection */ + its_send_mapc(col, false); + + lpi_stats_expect(-1, -1); + its_send_int(dev2, 0); + check_lpi_stats("no LPI triggered after collection unmapping"); +} + +static void test_its_pending_migration(void) +{ + struct its_device *dev; + struct its_collection *collection[2]; + int *expected = malloc(nr_cpus * sizeof(int)); + int pe0 = nr_cpus - 1, pe1 = nr_cpus - 2; + u64 pendbaser; + void *ptr; + int i; + + if (its_prerequisites(4)) + return; + + dev = its_create_device(2 /* dev id */, 8 /* nb_ites */); + its_send_mapd(dev, true); + + collection[0] = its_create_collection(pe0, pe0); + collection[1] = its_create_collection(pe1, pe1); + its_send_mapc(collection[0], true); + its_send_mapc(collection[1], true); + + /* disable lpi at redist level */ + gicv3_lpi_rdist_disable(pe0); + gicv3_lpi_rdist_disable(pe1); + + /* lpis are interleaved inbetween the 2 PEs */ + for (i = 0; i < 256; i++) { + struct its_collection *col = i % 2 ? collection[0] : + collection[1]; + int vcpu = col->target_address >> 16; + + its_send_mapti(dev, LPI(i), i, col); + gicv3_lpi_set_config(LPI(i), LPI_PROP_DEFAULT); + gicv3_lpi_set_clr_pending(vcpu, LPI(i), true); + } + its_send_invall(collection[0]); + its_send_invall(collection[1]); + + /* Set the PTZ bit on each pendbaser */ + + expected[pe0] = 128; + expected[pe1] = 128; + + ptr = gicv3_data.redist_base[pe0] + GICR_PENDBASER; + pendbaser = readq(ptr); + writeq(pendbaser & ~GICR_PENDBASER_PTZ, ptr); + + ptr = gicv3_data.redist_base[pe1] + GICR_PENDBASER; + pendbaser = readq(ptr); + writeq(pendbaser & ~GICR_PENDBASER_PTZ, ptr); + + gicv3_lpi_rdist_enable(pe0); + gicv3_lpi_rdist_enable(pe1); + + puts("Now migrate the VM, then press a key to continue...\n"); + (void)getchar(); + report_info("Migration complete"); + + /* let's wait for the 256 LPIs to be handled */ + mdelay(1000); + + check_lpi_hits(expected, "128 LPIs on both PE0 and PE1 after migration"); +} #endif int main(int argc, char **argv) @@ -840,6 +978,14 @@ int main(int argc, char **argv) report_prefix_push(argv[1]); test_its_migration(); report_prefix_pop(); + } else if (!strcmp(argv[1], "its-pending-migration")) { + report_prefix_push(argv[1]); + test_its_pending_migration(); + report_prefix_pop(); + } else if (!strcmp(argv[1], "its-migrate-unmapped-collection")) { + report_prefix_push(argv[1]); + test_migrate_unmapped_collection(); + report_prefix_pop(); } else if (strcmp(argv[1], "its-introspection") == 0) { report_prefix_push(argv[1]); test_its_introspection(); diff --git a/arm/unittests.cfg b/arm/unittests.cfg index 480adec..b96f0a1 100644 --- a/arm/unittests.cfg +++ b/arm/unittests.cfg @@ -144,6 +144,22 @@ extra_params = -machine gic-version=3 -append 'its-migration' groups = its migration arch = arm64 +[its-pending-migration] +file = gic.flat +smp = $MAX_SMP +accel = kvm +extra_params = -machine gic-version=3 -append 'its-pending-migration' +groups = its migration +arch = arm64 + +[its-migrate-unmapped-collection] +file = gic.flat +smp = $MAX_SMP +accel = kvm +extra_params = -machine gic-version=3 -append 'its-migrate-unmapped-collection' +groups = its migration +arch = arm64 + # Test PSCI emulation [psci] file = psci.flat
Add two new migration tests. One testing the migration of a topology where collection were unmapped. The second test checks the migration of the pending table. Signed-off-by: Eric Auger <eric.auger@redhat.com> --- v4 -> v5: - move stub from header to arm/gic.c v3 -> v4: - do not talk about odd/even CPUs, use pe0 and pe1 - comment the delay v2 -> v3: - tests belong to both its and migration groups - use LPI(i) - gicv3_lpi_set_pending_table_bit renamed into gicv3_lpi_set_clr_pending --- arm/gic.c | 146 ++++++++++++++++++++++++++++++++++++++++++++++ arm/unittests.cfg | 16 +++++ 2 files changed, 162 insertions(+)