| Message ID | 20200430021314.6425-1-justin.he@arm.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | vhost: vsock: don't send pkt when vq is not started | expand |
Hi Jia, thanks for the patch, some comments below: On Thu, Apr 30, 2020 at 10:13:14AM +0800, Jia He wrote: > Ning Bo reported an abnormal 2-second gap when booting Kata container [1]. > The unconditional timeout is caused by VSOCK_DEFAULT_CONNECT_TIMEOUT of > connect at client side. The vhost vsock client tries to connect an > initlizing virtio vsock server. > > The abnormal flow looks like: > host-userspace vhost vsock guest vsock > ============== =========== ============ > connect() --------> vhost_transport_send_pkt_work() initializing > | vq->private_data==NULL > | will not be queued > V > schedule_timeout(2s) > vhost_vsock_start() <--------- device ready > set vq->private_data > > wait for 2s and failed > > connect() again vq->private_data!=NULL recv connecting pkt > > 1. host userspace sends a connect pkt, at that time, guest vsock is under > initializing, hence the vhost_vsock_start has not been called. So > vq->private_data==NULL, and the pkt is not been queued to send to guest. > 2. then it sleeps for 2s > 3. after guest vsock finishes initializing, vq->private_data is set. > 4. When host userspace wakes up after 2s, send connecting pkt again, > everything is fine. > > This fixes it by checking vq->private_data in vhost_transport_send_pkt, > and return at once if !vq->private_data. This makes user connect() > be returned with ECONNREFUSED. > > After this patch, kata-runtime (with vsock enabled) boottime reduces from > 3s to 1s on ThunderX2 arm64 server. > > [1] https://github.com/kata-containers/runtime/issues/1917 > > Reported-by: Ning Bo <n.b@live.com> > Signed-off-by: Jia He <justin.he@arm.com> > --- > drivers/vhost/vsock.c | 8 ++++++++ > 1 file changed, 8 insertions(+) > > diff --git a/drivers/vhost/vsock.c b/drivers/vhost/vsock.c > index e36aaf9ba7bd..67474334dd88 100644 > --- a/drivers/vhost/vsock.c > +++ b/drivers/vhost/vsock.c > @@ -241,6 +241,7 @@ vhost_transport_send_pkt(struct virtio_vsock_pkt *pkt) > { > struct vhost_vsock *vsock; > int len = pkt->len; > + struct vhost_virtqueue *vq; > > rcu_read_lock(); > > @@ -252,6 +253,13 @@ vhost_transport_send_pkt(struct virtio_vsock_pkt *pkt) > return -ENODEV; > } > > + vq = &vsock->vqs[VSOCK_VQ_RX]; > + if (!vq->private_data) { I think is better to use vhost_vq_get_backend(): if (!vhost_vq_get_backend(&vsock->vqs[VSOCK_VQ_RX])) { ... This function should be called with 'vq->mutex' acquired as explained in the comment, but here we can avoid that, because we are not using the vq, so it is safe, because in vhost_transport_do_send_pkt() we check it again. Please add a comment explaining that. As an alternative to this patch, should we kick the send worker when the device is ready? IIUC we reach the timeout because the send worker (that runs vhost_transport_do_send_pkt()) exits immediately since 'vq->private_data' is NULL, and no one will requeue it. Let's do it when we know the device is ready: diff --git a/drivers/vhost/vsock.c b/drivers/vhost/vsock.c index e36aaf9ba7bd..295b5867944f 100644 --- a/drivers/vhost/vsock.c +++ b/drivers/vhost/vsock.c @@ -543,6 +543,11 @@ static int vhost_vsock_start(struct vhost_vsock *vsock) mutex_unlock(&vq->mutex); } + /* Some packets may have been queued before the device was started, + * let's kick the send worker to send them. + */ + vhost_work_queue(&vsock->dev, &vsock->send_pkt_work); + mutex_unlock(&vsock->dev.mutex); return 0; I didn't test it, can you try if it fixes the issue? I'm not sure which is better... Thanks, Stefano
Hi Stefano > -----Original Message----- > From: Stefano Garzarella <sgarzare@redhat.com> > Sent: Thursday, April 30, 2020 4:26 PM > To: Justin He <Justin.He@arm.com> > Cc: Stefan Hajnoczi <stefanha@redhat.com>; Michael S. Tsirkin > <mst@redhat.com>; Jason Wang <jasowang@redhat.com>; > kvm@vger.kernel.org; virtualization@lists.linux-foundation.org; > netdev@vger.kernel.org; linux-kernel@vger.kernel.org; Kaly Xin > <Kaly.Xin@arm.com> > Subject: Re: [PATCH] vhost: vsock: don't send pkt when vq is not started > > Hi Jia, > thanks for the patch, some comments below: > > On Thu, Apr 30, 2020 at 10:13:14AM +0800, Jia He wrote: > > Ning Bo reported an abnormal 2-second gap when booting Kata container > [1]. > > The unconditional timeout is caused by > VSOCK_DEFAULT_CONNECT_TIMEOUT of > > connect at client side. The vhost vsock client tries to connect an > > initlizing virtio vsock server. > > > > The abnormal flow looks like: > > host-userspace vhost vsock guest vsock > > ============== =========== ============ > > connect() --------> vhost_transport_send_pkt_work() initializing > > | vq->private_data==NULL > > | will not be queued > > V > > schedule_timeout(2s) > > vhost_vsock_start() <--------- device ready > > set vq->private_data > > > > wait for 2s and failed > > > > connect() again vq->private_data!=NULL recv connecting pkt > > > > 1. host userspace sends a connect pkt, at that time, guest vsock is under > > initializing, hence the vhost_vsock_start has not been called. So > > vq->private_data==NULL, and the pkt is not been queued to send to guest. > > 2. then it sleeps for 2s > > 3. after guest vsock finishes initializing, vq->private_data is set. > > 4. When host userspace wakes up after 2s, send connecting pkt again, > > everything is fine. > > > > This fixes it by checking vq->private_data in vhost_transport_send_pkt, > > and return at once if !vq->private_data. This makes user connect() > > be returned with ECONNREFUSED. > > > > After this patch, kata-runtime (with vsock enabled) boottime reduces from > > 3s to 1s on ThunderX2 arm64 server. > > > > [1] https://github.com/kata-containers/runtime/issues/1917 > > > > Reported-by: Ning Bo <n.b@live.com> > > Signed-off-by: Jia He <justin.he@arm.com> > > --- > > drivers/vhost/vsock.c | 8 ++++++++ > > 1 file changed, 8 insertions(+) > > > > diff --git a/drivers/vhost/vsock.c b/drivers/vhost/vsock.c > > index e36aaf9ba7bd..67474334dd88 100644 > > --- a/drivers/vhost/vsock.c > > +++ b/drivers/vhost/vsock.c > > @@ -241,6 +241,7 @@ vhost_transport_send_pkt(struct virtio_vsock_pkt > *pkt) > > { > > struct vhost_vsock *vsock; > > int len = pkt->len; > > +struct vhost_virtqueue *vq; > > > > rcu_read_lock(); > > > > @@ -252,6 +253,13 @@ vhost_transport_send_pkt(struct virtio_vsock_pkt > *pkt) > > return -ENODEV; > > } > > > > +vq = &vsock->vqs[VSOCK_VQ_RX]; > > +if (!vq->private_data) { > > I think is better to use vhost_vq_get_backend(): > > if (!vhost_vq_get_backend(&vsock->vqs[VSOCK_VQ_RX])) { > ... > > This function should be called with 'vq->mutex' acquired as explained in > the comment, but here we can avoid that, because we are not using the vq, > so it is safe, because in vhost_transport_do_send_pkt() we check it again. > > Please add a comment explaining that. > Thanks, vhost_vq_get_backend is better. I chose a 5.3 kernel to develop and missed this helper. > > As an alternative to this patch, should we kick the send worker when the > device is ready? > > IIUC we reach the timeout because the send worker (that runs > vhost_transport_do_send_pkt()) exits immediately since 'vq->private_data' > is NULL, and no one will requeue it. > > Let's do it when we know the device is ready: > > diff --git a/drivers/vhost/vsock.c b/drivers/vhost/vsock.c > index e36aaf9ba7bd..295b5867944f 100644 > --- a/drivers/vhost/vsock.c > +++ b/drivers/vhost/vsock.c > @@ -543,6 +543,11 @@ static int vhost_vsock_start(struct vhost_vsock > *vsock) > mutex_unlock(&vq->mutex); > } > > + /* Some packets may have been queued before the device was started, > + * let's kick the send worker to send them. > + */ > + vhost_work_queue(&vsock->dev, &vsock->send_pkt_work); > + Yes, it works. But do you think a threshold should be set here to prevent the queue from being too long? E.g. the client user sends too many connect pkts in a short time before the server is completely ready. > mutex_unlock(&vsock->dev.mutex); > return 0; > > I didn't test it, can you try if it fixes the issue? > > I'm not sure which is better... I don't know, either. Wait for more comments
On Thu, Apr 30, 2020 at 10:06:26AM +0000, Justin He wrote: > Hi Stefano > > > -----Original Message----- > > From: Stefano Garzarella <sgarzare@redhat.com> > > Sent: Thursday, April 30, 2020 4:26 PM > > To: Justin He <Justin.He@arm.com> > > Cc: Stefan Hajnoczi <stefanha@redhat.com>; Michael S. Tsirkin > > <mst@redhat.com>; Jason Wang <jasowang@redhat.com>; > > kvm@vger.kernel.org; virtualization@lists.linux-foundation.org; > > netdev@vger.kernel.org; linux-kernel@vger.kernel.org; Kaly Xin > > <Kaly.Xin@arm.com> > > Subject: Re: [PATCH] vhost: vsock: don't send pkt when vq is not started > > > > Hi Jia, > > thanks for the patch, some comments below: > > > > On Thu, Apr 30, 2020 at 10:13:14AM +0800, Jia He wrote: > > > Ning Bo reported an abnormal 2-second gap when booting Kata container > > [1]. > > > The unconditional timeout is caused by > > VSOCK_DEFAULT_CONNECT_TIMEOUT of > > > connect at client side. The vhost vsock client tries to connect an > > > initlizing virtio vsock server. > > > > > > The abnormal flow looks like: > > > host-userspace vhost vsock guest vsock > > > ============== =========== ============ > > > connect() --------> vhost_transport_send_pkt_work() initializing > > > | vq->private_data==NULL > > > | will not be queued > > > V > > > schedule_timeout(2s) > > > vhost_vsock_start() <--------- device ready > > > set vq->private_data > > > > > > wait for 2s and failed > > > > > > connect() again vq->private_data!=NULL recv connecting pkt > > > > > > 1. host userspace sends a connect pkt, at that time, guest vsock is under > > > initializing, hence the vhost_vsock_start has not been called. So > > > vq->private_data==NULL, and the pkt is not been queued to send to guest. > > > 2. then it sleeps for 2s > > > 3. after guest vsock finishes initializing, vq->private_data is set. > > > 4. When host userspace wakes up after 2s, send connecting pkt again, > > > everything is fine. > > > > > > This fixes it by checking vq->private_data in vhost_transport_send_pkt, > > > and return at once if !vq->private_data. This makes user connect() > > > be returned with ECONNREFUSED. > > > > > > After this patch, kata-runtime (with vsock enabled) boottime reduces from > > > 3s to 1s on ThunderX2 arm64 server. > > > > > > [1] https://github.com/kata-containers/runtime/issues/1917 > > > > > > Reported-by: Ning Bo <n.b@live.com> > > > Signed-off-by: Jia He <justin.he@arm.com> > > > --- > > > drivers/vhost/vsock.c | 8 ++++++++ > > > 1 file changed, 8 insertions(+) > > > > > > diff --git a/drivers/vhost/vsock.c b/drivers/vhost/vsock.c > > > index e36aaf9ba7bd..67474334dd88 100644 > > > --- a/drivers/vhost/vsock.c > > > +++ b/drivers/vhost/vsock.c > > > @@ -241,6 +241,7 @@ vhost_transport_send_pkt(struct virtio_vsock_pkt > > *pkt) > > > { > > > struct vhost_vsock *vsock; > > > int len = pkt->len; > > > +struct vhost_virtqueue *vq; > > > > > > rcu_read_lock(); > > > > > > @@ -252,6 +253,13 @@ vhost_transport_send_pkt(struct virtio_vsock_pkt > > *pkt) > > > return -ENODEV; > > > } > > > > > > +vq = &vsock->vqs[VSOCK_VQ_RX]; > > > +if (!vq->private_data) { > > > > I think is better to use vhost_vq_get_backend(): > > > > if (!vhost_vq_get_backend(&vsock->vqs[VSOCK_VQ_RX])) { > > ... > > > > This function should be called with 'vq->mutex' acquired as explained in > > the comment, but here we can avoid that, because we are not using the vq, > > so it is safe, because in vhost_transport_do_send_pkt() we check it again. > > > > Please add a comment explaining that. > > > > Thanks, vhost_vq_get_backend is better. I chose a 5.3 kernel to develop > and missed this helper. :-) > > > > As an alternative to this patch, should we kick the send worker when the > > device is ready? > > > > IIUC we reach the timeout because the send worker (that runs > > vhost_transport_do_send_pkt()) exits immediately since 'vq->private_data' > > is NULL, and no one will requeue it. > > > > Let's do it when we know the device is ready: > > > > diff --git a/drivers/vhost/vsock.c b/drivers/vhost/vsock.c > > index e36aaf9ba7bd..295b5867944f 100644 > > --- a/drivers/vhost/vsock.c > > +++ b/drivers/vhost/vsock.c > > @@ -543,6 +543,11 @@ static int vhost_vsock_start(struct vhost_vsock > > *vsock) > > mutex_unlock(&vq->mutex); > > } > > > > + /* Some packets may have been queued before the device was started, > > + * let's kick the send worker to send them. > > + */ > > + vhost_work_queue(&vsock->dev, &vsock->send_pkt_work); > > + > Yes, it works. > But do you think a threshold should be set here to prevent the queue > from being too long? E.g. the client user sends too many connect pkts > in a short time before the server is completely ready. When the user call the connect() the socket status is moved to SS_CONNECTING (see net/vmw_vsock/af_vsock.c), so another connect() on the same socket will receive EALREADY error. If the user uses multiple sockets, the socket layer already check for any limits, so I don't think we should put a threshold here. > > > mutex_unlock(&vsock->dev.mutex); > > return 0; > > > > I didn't test it, can you try if it fixes the issue? > > > > I'm not sure which is better... > I don't know, either. Wait for more comments
On Thu, Apr 30, 2020 at 06:25:21PM +0200, Stefano Garzarella wrote: > On Thu, Apr 30, 2020 at 10:06:26AM +0000, Justin He wrote: > > Hi Stefano > > > > > -----Original Message----- > > > From: Stefano Garzarella <sgarzare@redhat.com> > > > Sent: Thursday, April 30, 2020 4:26 PM > > > To: Justin He <Justin.He@arm.com> > > > Cc: Stefan Hajnoczi <stefanha@redhat.com>; Michael S. Tsirkin > > > <mst@redhat.com>; Jason Wang <jasowang@redhat.com>; > > > kvm@vger.kernel.org; virtualization@lists.linux-foundation.org; > > > netdev@vger.kernel.org; linux-kernel@vger.kernel.org; Kaly Xin > > > <Kaly.Xin@arm.com> > > > Subject: Re: [PATCH] vhost: vsock: don't send pkt when vq is not started > > > > > > Hi Jia, > > > thanks for the patch, some comments below: > > > > > > On Thu, Apr 30, 2020 at 10:13:14AM +0800, Jia He wrote: > > > > Ning Bo reported an abnormal 2-second gap when booting Kata container > > > [1]. > > > > The unconditional timeout is caused by > > > VSOCK_DEFAULT_CONNECT_TIMEOUT of > > > > connect at client side. The vhost vsock client tries to connect an > > > > initlizing virtio vsock server. > > > > > > > > The abnormal flow looks like: > > > > host-userspace vhost vsock guest vsock > > > > ============== =========== ============ > > > > connect() --------> vhost_transport_send_pkt_work() initializing > > > > | vq->private_data==NULL > > > > | will not be queued > > > > V > > > > schedule_timeout(2s) > > > > vhost_vsock_start() <--------- device ready > > > > set vq->private_data > > > > > > > > wait for 2s and failed > > > > > > > > connect() again vq->private_data!=NULL recv connecting pkt > > > > > > > > 1. host userspace sends a connect pkt, at that time, guest vsock is under > > > > initializing, hence the vhost_vsock_start has not been called. So > > > > vq->private_data==NULL, and the pkt is not been queued to send to guest. > > > > 2. then it sleeps for 2s > > > > 3. after guest vsock finishes initializing, vq->private_data is set. > > > > 4. When host userspace wakes up after 2s, send connecting pkt again, > > > > everything is fine. > > > > > > > > This fixes it by checking vq->private_data in vhost_transport_send_pkt, > > > > and return at once if !vq->private_data. This makes user connect() > > > > be returned with ECONNREFUSED. > > > > > > > > After this patch, kata-runtime (with vsock enabled) boottime reduces from > > > > 3s to 1s on ThunderX2 arm64 server. > > > > > > > > [1] https://github.com/kata-containers/runtime/issues/1917 > > > > > > > > Reported-by: Ning Bo <n.b@live.com> > > > > Signed-off-by: Jia He <justin.he@arm.com> > > > > --- > > > > drivers/vhost/vsock.c | 8 ++++++++ > > > > 1 file changed, 8 insertions(+) > > > > > > > > diff --git a/drivers/vhost/vsock.c b/drivers/vhost/vsock.c > > > > index e36aaf9ba7bd..67474334dd88 100644 > > > > --- a/drivers/vhost/vsock.c > > > > +++ b/drivers/vhost/vsock.c > > > > @@ -241,6 +241,7 @@ vhost_transport_send_pkt(struct virtio_vsock_pkt > > > *pkt) > > > > { > > > > struct vhost_vsock *vsock; > > > > int len = pkt->len; > > > > +struct vhost_virtqueue *vq; > > > > > > > > rcu_read_lock(); > > > > > > > > @@ -252,6 +253,13 @@ vhost_transport_send_pkt(struct virtio_vsock_pkt > > > *pkt) > > > > return -ENODEV; > > > > } > > > > > > > > +vq = &vsock->vqs[VSOCK_VQ_RX]; > > > > +if (!vq->private_data) { > > > > > > I think is better to use vhost_vq_get_backend(): > > > > > > if (!vhost_vq_get_backend(&vsock->vqs[VSOCK_VQ_RX])) { > > > ... > > > > > > This function should be called with 'vq->mutex' acquired as explained in > > > the comment, but here we can avoid that, because we are not using the vq, > > > so it is safe, because in vhost_transport_do_send_pkt() we check it again. > > > > > > Please add a comment explaining that. > > > > > > > Thanks, vhost_vq_get_backend is better. I chose a 5.3 kernel to develop > > and missed this helper. > > :-) > > > > > > > As an alternative to this patch, should we kick the send worker when the > > > device is ready? > > > > > > IIUC we reach the timeout because the send worker (that runs > > > vhost_transport_do_send_pkt()) exits immediately since 'vq->private_data' > > > is NULL, and no one will requeue it. > > > > > > Let's do it when we know the device is ready: > > > > > > diff --git a/drivers/vhost/vsock.c b/drivers/vhost/vsock.c > > > index e36aaf9ba7bd..295b5867944f 100644 > > > --- a/drivers/vhost/vsock.c > > > +++ b/drivers/vhost/vsock.c > > > @@ -543,6 +543,11 @@ static int vhost_vsock_start(struct vhost_vsock > > > *vsock) > > > mutex_unlock(&vq->mutex); > > > } > > > > > > + /* Some packets may have been queued before the device was started, > > > + * let's kick the send worker to send them. > > > + */ > > > + vhost_work_queue(&vsock->dev, &vsock->send_pkt_work); > > > + > > Yes, it works. > > But do you think a threshold should be set here to prevent the queue > > from being too long? E.g. the client user sends too many connect pkts > > in a short time before the server is completely ready. > > When the user call the connect() the socket status is moved to > SS_CONNECTING (see net/vmw_vsock/af_vsock.c), so another connect() on > the same socket will receive EALREADY error. > > If the user uses multiple sockets, the socket layer already check for > any limits, so I don't think we should put a threshold here. > > > > > > mutex_unlock(&vsock->dev.mutex); > > > return 0; > > > > > > I didn't test it, can you try if it fixes the issue? > > > > > > I'm not sure which is better... > > I don't know, either. Wait for more comments
On Thu, Apr 30, 2020 at 03:43:00PM -0400, Michael S. Tsirkin wrote: > On Thu, Apr 30, 2020 at 06:25:21PM +0200, Stefano Garzarella wrote: > > On Thu, Apr 30, 2020 at 10:06:26AM +0000, Justin He wrote: > > > Hi Stefano > > > > > > > -----Original Message----- > > > > From: Stefano Garzarella <sgarzare@redhat.com> > > > > Sent: Thursday, April 30, 2020 4:26 PM > > > > To: Justin He <Justin.He@arm.com> > > > > Cc: Stefan Hajnoczi <stefanha@redhat.com>; Michael S. Tsirkin > > > > <mst@redhat.com>; Jason Wang <jasowang@redhat.com>; > > > > kvm@vger.kernel.org; virtualization@lists.linux-foundation.org; > > > > netdev@vger.kernel.org; linux-kernel@vger.kernel.org; Kaly Xin > > > > <Kaly.Xin@arm.com> > > > > Subject: Re: [PATCH] vhost: vsock: don't send pkt when vq is not started > > > > > > > > Hi Jia, > > > > thanks for the patch, some comments below: > > > > > > > > On Thu, Apr 30, 2020 at 10:13:14AM +0800, Jia He wrote: > > > > > Ning Bo reported an abnormal 2-second gap when booting Kata container > > > > [1]. > > > > > The unconditional timeout is caused by > > > > VSOCK_DEFAULT_CONNECT_TIMEOUT of > > > > > connect at client side. The vhost vsock client tries to connect an > > > > > initlizing virtio vsock server. > > > > > > > > > > The abnormal flow looks like: > > > > > host-userspace vhost vsock guest vsock > > > > > ============== =========== ============ > > > > > connect() --------> vhost_transport_send_pkt_work() initializing > > > > > | vq->private_data==NULL > > > > > | will not be queued > > > > > V > > > > > schedule_timeout(2s) > > > > > vhost_vsock_start() <--------- device ready > > > > > set vq->private_data > > > > > > > > > > wait for 2s and failed > > > > > > > > > > connect() again vq->private_data!=NULL recv connecting pkt > > > > > > > > > > 1. host userspace sends a connect pkt, at that time, guest vsock is under > > > > > initializing, hence the vhost_vsock_start has not been called. So > > > > > vq->private_data==NULL, and the pkt is not been queued to send to guest. > > > > > 2. then it sleeps for 2s > > > > > 3. after guest vsock finishes initializing, vq->private_data is set. > > > > > 4. When host userspace wakes up after 2s, send connecting pkt again, > > > > > everything is fine. > > > > > > > > > > This fixes it by checking vq->private_data in vhost_transport_send_pkt, > > > > > and return at once if !vq->private_data. This makes user connect() > > > > > be returned with ECONNREFUSED. > > > > > > > > > > After this patch, kata-runtime (with vsock enabled) boottime reduces from > > > > > 3s to 1s on ThunderX2 arm64 server. > > > > > > > > > > [1] https://github.com/kata-containers/runtime/issues/1917 > > > > > > > > > > Reported-by: Ning Bo <n.b@live.com> > > > > > Signed-off-by: Jia He <justin.he@arm.com> > > > > > --- > > > > > drivers/vhost/vsock.c | 8 ++++++++ > > > > > 1 file changed, 8 insertions(+) > > > > > > > > > > diff --git a/drivers/vhost/vsock.c b/drivers/vhost/vsock.c > > > > > index e36aaf9ba7bd..67474334dd88 100644 > > > > > --- a/drivers/vhost/vsock.c > > > > > +++ b/drivers/vhost/vsock.c > > > > > @@ -241,6 +241,7 @@ vhost_transport_send_pkt(struct virtio_vsock_pkt > > > > *pkt) > > > > > { > > > > > struct vhost_vsock *vsock; > > > > > int len = pkt->len; > > > > > +struct vhost_virtqueue *vq; > > > > > > > > > > rcu_read_lock(); > > > > > > > > > > @@ -252,6 +253,13 @@ vhost_transport_send_pkt(struct virtio_vsock_pkt > > > > *pkt) > > > > > return -ENODEV; > > > > > } > > > > > > > > > > +vq = &vsock->vqs[VSOCK_VQ_RX]; > > > > > +if (!vq->private_data) { > > > > > > > > I think is better to use vhost_vq_get_backend(): > > > > > > > > if (!vhost_vq_get_backend(&vsock->vqs[VSOCK_VQ_RX])) { > > > > ... > > > > > > > > This function should be called with 'vq->mutex' acquired as explained in > > > > the comment, but here we can avoid that, because we are not using the vq, > > > > so it is safe, because in vhost_transport_do_send_pkt() we check it again. > > > > > > > > Please add a comment explaining that. > > > > > > > > > > Thanks, vhost_vq_get_backend is better. I chose a 5.3 kernel to develop > > > and missed this helper. > > > > :-) > > > > > > > > > > As an alternative to this patch, should we kick the send worker when the > > > > device is ready? > > > > > > > > IIUC we reach the timeout because the send worker (that runs > > > > vhost_transport_do_send_pkt()) exits immediately since 'vq->private_data' > > > > is NULL, and no one will requeue it. > > > > > > > > Let's do it when we know the device is ready: > > > > > > > > diff --git a/drivers/vhost/vsock.c b/drivers/vhost/vsock.c > > > > index e36aaf9ba7bd..295b5867944f 100644 > > > > --- a/drivers/vhost/vsock.c > > > > +++ b/drivers/vhost/vsock.c > > > > @@ -543,6 +543,11 @@ static int vhost_vsock_start(struct vhost_vsock > > > > *vsock) > > > > mutex_unlock(&vq->mutex); > > > > } > > > > > > > > + /* Some packets may have been queued before the device was started, > > > > + * let's kick the send worker to send them. > > > > + */ > > > > + vhost_work_queue(&vsock->dev, &vsock->send_pkt_work); > > > > + > > > Yes, it works. > > > But do you think a threshold should be set here to prevent the queue > > > from being too long? E.g. the client user sends too many connect pkts > > > in a short time before the server is completely ready. > > > > When the user call the connect() the socket status is moved to > > SS_CONNECTING (see net/vmw_vsock/af_vsock.c), so another connect() on > > the same socket will receive EALREADY error. > > > > If the user uses multiple sockets, the socket layer already check for > > any limits, so I don't think we should put a threshold here. > > > > > > > > > mutex_unlock(&vsock->dev.mutex); > > > > return 0; > > > > > > > > I didn't test it, can you try if it fixes the issue? > > > > > > > > I'm not sure which is better... > > > I don't know, either. Wait for more comments
diff --git a/drivers/vhost/vsock.c b/drivers/vhost/vsock.c index e36aaf9ba7bd..67474334dd88 100644 --- a/drivers/vhost/vsock.c +++ b/drivers/vhost/vsock.c @@ -241,6 +241,7 @@ vhost_transport_send_pkt(struct virtio_vsock_pkt *pkt) { struct vhost_vsock *vsock; int len = pkt->len; + struct vhost_virtqueue *vq; rcu_read_lock(); @@ -252,6 +253,13 @@ vhost_transport_send_pkt(struct virtio_vsock_pkt *pkt) return -ENODEV; } + vq = &vsock->vqs[VSOCK_VQ_RX]; + if (!vq->private_data) { + rcu_read_unlock(); + virtio_transport_free_pkt(pkt); + return -ECONNREFUSED; + } + if (pkt->reply) atomic_inc(&vsock->queued_replies);
Ning Bo reported an abnormal 2-second gap when booting Kata container [1]. The unconditional timeout is caused by VSOCK_DEFAULT_CONNECT_TIMEOUT of connect at client side. The vhost vsock client tries to connect an initlizing virtio vsock server. The abnormal flow looks like: host-userspace vhost vsock guest vsock ============== =========== ============ connect() --------> vhost_transport_send_pkt_work() initializing | vq->private_data==NULL | will not be queued V schedule_timeout(2s) vhost_vsock_start() <--------- device ready set vq->private_data wait for 2s and failed connect() again vq->private_data!=NULL recv connecting pkt 1. host userspace sends a connect pkt, at that time, guest vsock is under initializing, hence the vhost_vsock_start has not been called. So vq->private_data==NULL, and the pkt is not been queued to send to guest. 2. then it sleeps for 2s 3. after guest vsock finishes initializing, vq->private_data is set. 4. When host userspace wakes up after 2s, send connecting pkt again, everything is fine. This fixes it by checking vq->private_data in vhost_transport_send_pkt, and return at once if !vq->private_data. This makes user connect() be returned with ECONNREFUSED. After this patch, kata-runtime (with vsock enabled) boottime reduces from 3s to 1s on ThunderX2 arm64 server. [1] https://github.com/kata-containers/runtime/issues/1917 Reported-by: Ning Bo <n.b@live.com> Signed-off-by: Jia He <justin.he@arm.com> --- drivers/vhost/vsock.c | 8 ++++++++ 1 file changed, 8 insertions(+)