diff mbox series

[kvm-unit-tests,v1,4/4] s390x: edat test

Message ID 20210209143835.1031617-5-imbrenda@linux.ibm.com (mailing list archive)
State New, archived
Headers show
Series s390: Add support for large pages | expand

Commit Message

Claudio Imbrenda Feb. 9, 2021, 2:38 p.m. UTC
Simple EDAT test.

Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
---
 s390x/Makefile      |   1 +
 s390x/edat.c        | 238 ++++++++++++++++++++++++++++++++++++++++++++
 s390x/unittests.cfg |   3 +
 3 files changed, 242 insertions(+)
 create mode 100644 s390x/edat.c

Comments

Thomas Huth Feb. 11, 2021, 11:35 a.m. UTC | #1
On 09/02/2021 15.38, Claudio Imbrenda wrote:
> Simple EDAT test.
> 
> Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
> ---
>   s390x/Makefile      |   1 +
>   s390x/edat.c        | 238 ++++++++++++++++++++++++++++++++++++++++++++
>   s390x/unittests.cfg |   3 +
>   3 files changed, 242 insertions(+)
>   create mode 100644 s390x/edat.c
> 
> diff --git a/s390x/Makefile b/s390x/Makefile
> index 08d85c9f..fc885150 100644
> --- a/s390x/Makefile
> +++ b/s390x/Makefile
> @@ -20,6 +20,7 @@ tests += $(TEST_DIR)/sclp.elf
>   tests += $(TEST_DIR)/css.elf
>   tests += $(TEST_DIR)/uv-guest.elf
>   tests += $(TEST_DIR)/sie.elf
> +tests += $(TEST_DIR)/edat.elf
>   
>   tests_binary = $(patsubst %.elf,%.bin,$(tests))
>   ifneq ($(HOST_KEY_DOCUMENT),)
> diff --git a/s390x/edat.c b/s390x/edat.c
> new file mode 100644
> index 00000000..504a1501
> --- /dev/null
> +++ b/s390x/edat.c
> @@ -0,0 +1,238 @@
> +/* SPDX-License-Identifier: GPL-2.0-only */
> +/*
> + * EDAT test.
> + *
> + * Copyright (c) 2021 IBM Corp
> + *
> + * Authors:
> + *	Claudio Imbrenda <imbrenda@linux.ibm.com>
> + */
> +#include <libcflat.h>
> +#include <vmalloc.h>
> +#include <asm/facility.h>
> +#include <asm/interrupt.h>
> +#include <mmu.h>
> +#include <asm/pgtable.h>
> +#include <asm-generic/barrier.h>
> +
> +#define TEID_ADDR	PAGE_MASK
> +#define TEID_AI		0x003
> +#define TEID_M		0x004
> +#define TEID_A		0x008
> +#define TEID_FS		0xc00
> +
> +#define LC_SIZE	(2 * PAGE_SIZE)
> +#define VIRT(x)	((void *)((unsigned long)(x) + (unsigned long)mem))
> +
> +static uint8_t prefix_buf[LC_SIZE] __attribute__((aligned(LC_SIZE)));
> +static unsigned int tmp[1024] __attribute__((aligned(PAGE_SIZE)));
> +static void *root, *mem, *m;
> +static struct lowcore *lc;
> +volatile unsigned int *p;
> +
> +/* Expect a program interrupt, and clear the TEID */
> +static void expect_dat_fault(void)
> +{
> +	expect_pgm_int();
> +	lc->trans_exc_id = 0;
> +}
> +
> +/* Check if a protection exception happened for the given address */
> +static bool check_pgm_prot(void *ptr)
> +{
> +	unsigned long teid = lc->trans_exc_id;
> +
> +	if (lc->pgm_int_code != PGM_INT_CODE_PROTECTION)
> +		return 0;

return false.
It's a bool return type.

> +	if (~teid & TEID_M)

I'd maybe rather write this as:

         if (!(teid & TEID_M))

... but it's just a matter of taste.

> +		return 1;

                 return true;

So this is for backward compatiblity with older Z systems that do not have 
the corresponding facility? Should there be a corresponding facility check 
somewhere? Or maybe add at least a comment?

> +	return (~teid & TEID_A) &&
> +		((teid & TEID_ADDR) == ((uint64_t)ptr & PAGE_MASK)) &&
> +		!(teid & TEID_AI);

So you're checking for one specific type of protection exception here only 
... please add an appropriate comment.

> +}
> +
> +static void test_dat(void)
> +{
> +	report_prefix_push("edat off");
> +	/* disable EDAT */
> +	ctl_clear_bit(0, 23);
> +
> +	/* Check some basics */
> +	p[0] = 42;
> +	report(p[0] == 42, "pte, r/w");
> +	p[0] = 0;
> +
> +	protect_page(m, PAGE_ENTRY_P);
> +	expect_dat_fault();
> +	p[0] = 42;
> +	unprotect_page(m, PAGE_ENTRY_P);
> +	report(!p[0] && check_pgm_prot(m), "pte, ro");
> +
> +	/* The FC bit should be ignored because EDAT is off */
> +	p[0] = 42;

I'd suggest to set p[0] = 0 here...

> +	protect_dat_entry(m, SEGMENT_ENTRY_FC, 4);

... and change the value to 42 after enabling the protection ... otherwise 
you don't really test the non-working write protection here, do you?

> +	report(p[0] == 42, "pmd, fc=1, r/w");
> +	unprotect_dat_entry(m, SEGMENT_ENTRY_FC, 4);
> +	p[0] = 0;
> +
> +	/* Segment protection should work even with EDAT off */
> +	protect_dat_entry(m, SEGMENT_ENTRY_P, 4);
> +	expect_dat_fault();
> +	p[0] = 42;
> +	report(!p[0] && check_pgm_prot(m), "pmd, ro");
> +	unprotect_dat_entry(m, SEGMENT_ENTRY_P, 4);
> +
> +	/* The FC bit should be ignored because EDAT is off*/

Set p[0] to 0 again before enabling the protection? Or maybe use a different 
value than 42 below...?

> +	protect_dat_entry(m, REGION3_ENTRY_FC, 3);
> +	p[0] = 42;
> +	report(p[0] == 42, "pud, fc=1, r/w");
> +	unprotect_dat_entry(m, REGION3_ENTRY_FC, 3);
> +	p[0] = 0;
> +
> +	/* Region1/2/3 protection should not work, because EDAT is off */
> +	protect_dat_entry(m, REGION_ENTRY_P, 3);
> +	p[0] = 42;
> +	report(p[0] == 42, "pud, ro");
> +	unprotect_dat_entry(m, REGION_ENTRY_P, 3);
> +	p[0] = 0;
> +
> +	protect_dat_entry(m, REGION_ENTRY_P, 2);
> +	p[0] = 42;
> +	report(p[0] == 42, "p4d, ro");
> +	unprotect_dat_entry(m, REGION_ENTRY_P, 2);
> +	p[0] = 0;
> +
> +	protect_dat_entry(m, REGION_ENTRY_P, 1);
> +	p[0] = 42;
> +	report(p[0] == 42, "pgd, ro");
> +	unprotect_dat_entry(m, REGION_ENTRY_P, 1);
> +	p[0] = 0;
> +
> +	report_prefix_pop();
> +}

  Thomas
Claudio Imbrenda Feb. 11, 2021, 12:18 p.m. UTC | #2
On Thu, 11 Feb 2021 12:35:49 +0100
Thomas Huth <thuth@redhat.com> wrote:

> On 09/02/2021 15.38, Claudio Imbrenda wrote:
> > Simple EDAT test.
> > 
> > Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
> > ---
> >   s390x/Makefile      |   1 +
> >   s390x/edat.c        | 238
> > ++++++++++++++++++++++++++++++++++++++++++++ s390x/unittests.cfg |
> >  3 + 3 files changed, 242 insertions(+)
> >   create mode 100644 s390x/edat.c
> > 
> > diff --git a/s390x/Makefile b/s390x/Makefile
> > index 08d85c9f..fc885150 100644
> > --- a/s390x/Makefile
> > +++ b/s390x/Makefile
> > @@ -20,6 +20,7 @@ tests += $(TEST_DIR)/sclp.elf
> >   tests += $(TEST_DIR)/css.elf
> >   tests += $(TEST_DIR)/uv-guest.elf
> >   tests += $(TEST_DIR)/sie.elf
> > +tests += $(TEST_DIR)/edat.elf
> >   
> >   tests_binary = $(patsubst %.elf,%.bin,$(tests))
> >   ifneq ($(HOST_KEY_DOCUMENT),)
> > diff --git a/s390x/edat.c b/s390x/edat.c
> > new file mode 100644
> > index 00000000..504a1501
> > --- /dev/null
> > +++ b/s390x/edat.c
> > @@ -0,0 +1,238 @@
> > +/* SPDX-License-Identifier: GPL-2.0-only */
> > +/*
> > + * EDAT test.
> > + *
> > + * Copyright (c) 2021 IBM Corp
> > + *
> > + * Authors:
> > + *	Claudio Imbrenda <imbrenda@linux.ibm.com>
> > + */
> > +#include <libcflat.h>
> > +#include <vmalloc.h>
> > +#include <asm/facility.h>
> > +#include <asm/interrupt.h>
> > +#include <mmu.h>
> > +#include <asm/pgtable.h>
> > +#include <asm-generic/barrier.h>
> > +
> > +#define TEID_ADDR	PAGE_MASK
> > +#define TEID_AI		0x003
> > +#define TEID_M		0x004
> > +#define TEID_A		0x008
> > +#define TEID_FS		0xc00
> > +
> > +#define LC_SIZE	(2 * PAGE_SIZE)
> > +#define VIRT(x)	((void *)((unsigned long)(x) + (unsigned
> > long)mem)) +
> > +static uint8_t prefix_buf[LC_SIZE]
> > __attribute__((aligned(LC_SIZE))); +static unsigned int tmp[1024]
> > __attribute__((aligned(PAGE_SIZE))); +static void *root, *mem, *m;
> > +static struct lowcore *lc;
> > +volatile unsigned int *p;
> > +
> > +/* Expect a program interrupt, and clear the TEID */
> > +static void expect_dat_fault(void)
> > +{
> > +	expect_pgm_int();
> > +	lc->trans_exc_id = 0;
> > +}
> > +
> > +/* Check if a protection exception happened for the given address
> > */ +static bool check_pgm_prot(void *ptr)
> > +{
> > +	unsigned long teid = lc->trans_exc_id;
> > +
> > +	if (lc->pgm_int_code != PGM_INT_CODE_PROTECTION)
> > +		return 0;  
> 
> return false.
> It's a bool return type.

yeah, that looks cleaner, I'll fix it

> > +	if (~teid & TEID_M)  
> 
> I'd maybe rather write this as:
> 
>          if (!(teid & TEID_M))
> 
> ... but it's just a matter of taste.

yes, I actually had it that way in the beginning, but using ~ is
shorter and does not need parentheses

> > +		return 1;  
> 
>                  return true;
> 
> So this is for backward compatiblity with older Z systems that do not
> have the corresponding facility? Should there be a corresponding
> facility check somewhere? Or maybe add at least a comment?

no, it's not for backwards compatibility as far as I know. If I read
the documentation correctly, that bit might be zero under some
circumstances, and here I will just give up instead of checking if the
circumstances were actually correct.

> > +	return (~teid & TEID_A) &&
> > +		((teid & TEID_ADDR) == ((uint64_t)ptr &
> > PAGE_MASK)) &&
> > +		!(teid & TEID_AI);  
> 
> So you're checking for one specific type of protection exception here
> only ... please add an appropriate comment.

more or less, but I'll add a comment to explain what's going on

> > +}
> > +
> > +static void test_dat(void)
> > +{
> > +	report_prefix_push("edat off");
> > +	/* disable EDAT */
> > +	ctl_clear_bit(0, 23);
> > +
> > +	/* Check some basics */
> > +	p[0] = 42;
> > +	report(p[0] == 42, "pte, r/w");
> > +	p[0] = 0;
> > +
> > +	protect_page(m, PAGE_ENTRY_P);
> > +	expect_dat_fault();
> > +	p[0] = 42;
> > +	unprotect_page(m, PAGE_ENTRY_P);
> > +	report(!p[0] && check_pgm_prot(m), "pte, ro");
> > +
> > +	/* The FC bit should be ignored because EDAT is off */
> > +	p[0] = 42;  
> 
> I'd suggest to set p[0] = 0 here...
> 
> > +	protect_dat_entry(m, SEGMENT_ENTRY_FC, 4);  
> 
> ... and change the value to 42 after enabling the protection ...
> otherwise you don't really test the non-working write protection
> here, do you?

but this is not the write protection. here I'm setting the bit for
large pages. so first I write something, then I set the bit, then I
check if I can still read it. if not, it means that the FC bit was not
ignored (i.e. the entry was considered as a large page instead of a
normal segment table entry pointing to a page table)

Write protection for segment entries _should_ work even with EDAT off,
and that is in fact what the next test checks...

> > +	report(p[0] == 42, "pmd, fc=1, r/w");
> > +	unprotect_dat_entry(m, SEGMENT_ENTRY_FC, 4);
> > +	p[0] = 0;
> > +

... this one here:

> > +	/* Segment protection should work even with EDAT off */
> > +	protect_dat_entry(m, SEGMENT_ENTRY_P, 4);
> > +	expect_dat_fault();
> > +	p[0] = 42;
> > +	report(!p[0] && check_pgm_prot(m), "pmd, ro");
> > +	unprotect_dat_entry(m, SEGMENT_ENTRY_P, 4);
> > +
> > +	/* The FC bit should be ignored because EDAT is off*/  
> 
> Set p[0] to 0 again before enabling the protection? Or maybe use a
> different value than 42 below...?

why? we already checked that p[0] == 0, and if p[0] somehow still is
42, we are going to set it to 42 again

> > +	protect_dat_entry(m, REGION3_ENTRY_FC, 3);
> > +	p[0] = 42;

but! we should set it to 42 BEFORE setting the FC bit!
I will fix this

and maybe add a few more comments to explain what's going on

> > +	report(p[0] == 42, "pud, fc=1, r/w");
> > +	unprotect_dat_entry(m, REGION3_ENTRY_FC, 3);
> > +	p[0] = 0;
> > +
> > +	/* Region1/2/3 protection should not work, because EDAT is
> > off */
> > +	protect_dat_entry(m, REGION_ENTRY_P, 3);
> > +	p[0] = 42;
> > +	report(p[0] == 42, "pud, ro");
> > +	unprotect_dat_entry(m, REGION_ENTRY_P, 3);
> > +	p[0] = 0;
> > +
> > +	protect_dat_entry(m, REGION_ENTRY_P, 2);
> > +	p[0] = 42;
> > +	report(p[0] == 42, "p4d, ro");
> > +	unprotect_dat_entry(m, REGION_ENTRY_P, 2);
> > +	p[0] = 0;
> > +
> > +	protect_dat_entry(m, REGION_ENTRY_P, 1);
> > +	p[0] = 42;
> > +	report(p[0] == 42, "pgd, ro");
> > +	unprotect_dat_entry(m, REGION_ENTRY_P, 1);
> > +	p[0] = 0;
> > +
> > +	report_prefix_pop();
> > +}  
> 
>   Thomas
>
diff mbox series

Patch

diff --git a/s390x/Makefile b/s390x/Makefile
index 08d85c9f..fc885150 100644
--- a/s390x/Makefile
+++ b/s390x/Makefile
@@ -20,6 +20,7 @@  tests += $(TEST_DIR)/sclp.elf
 tests += $(TEST_DIR)/css.elf
 tests += $(TEST_DIR)/uv-guest.elf
 tests += $(TEST_DIR)/sie.elf
+tests += $(TEST_DIR)/edat.elf
 
 tests_binary = $(patsubst %.elf,%.bin,$(tests))
 ifneq ($(HOST_KEY_DOCUMENT),)
diff --git a/s390x/edat.c b/s390x/edat.c
new file mode 100644
index 00000000..504a1501
--- /dev/null
+++ b/s390x/edat.c
@@ -0,0 +1,238 @@ 
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * EDAT test.
+ *
+ * Copyright (c) 2021 IBM Corp
+ *
+ * Authors:
+ *	Claudio Imbrenda <imbrenda@linux.ibm.com>
+ */
+#include <libcflat.h>
+#include <vmalloc.h>
+#include <asm/facility.h>
+#include <asm/interrupt.h>
+#include <mmu.h>
+#include <asm/pgtable.h>
+#include <asm-generic/barrier.h>
+
+#define TEID_ADDR	PAGE_MASK
+#define TEID_AI		0x003
+#define TEID_M		0x004
+#define TEID_A		0x008
+#define TEID_FS		0xc00
+
+#define LC_SIZE	(2 * PAGE_SIZE)
+#define VIRT(x)	((void *)((unsigned long)(x) + (unsigned long)mem))
+
+static uint8_t prefix_buf[LC_SIZE] __attribute__((aligned(LC_SIZE)));
+static unsigned int tmp[1024] __attribute__((aligned(PAGE_SIZE)));
+static void *root, *mem, *m;
+static struct lowcore *lc;
+volatile unsigned int *p;
+
+/* Expect a program interrupt, and clear the TEID */
+static void expect_dat_fault(void)
+{
+	expect_pgm_int();
+	lc->trans_exc_id = 0;
+}
+
+/* Check if a protection exception happened for the given address */
+static bool check_pgm_prot(void *ptr)
+{
+	unsigned long teid = lc->trans_exc_id;
+
+	if (lc->pgm_int_code != PGM_INT_CODE_PROTECTION)
+		return 0;
+	if (~teid & TEID_M)
+		return 1;
+	return (~teid & TEID_A) &&
+		((teid & TEID_ADDR) == ((uint64_t)ptr & PAGE_MASK)) &&
+		!(teid & TEID_AI);
+}
+
+static void test_dat(void)
+{
+	report_prefix_push("edat off");
+	/* disable EDAT */
+	ctl_clear_bit(0, 23);
+
+	/* Check some basics */
+	p[0] = 42;
+	report(p[0] == 42, "pte, r/w");
+	p[0] = 0;
+
+	protect_page(m, PAGE_ENTRY_P);
+	expect_dat_fault();
+	p[0] = 42;
+	unprotect_page(m, PAGE_ENTRY_P);
+	report(!p[0] && check_pgm_prot(m), "pte, ro");
+
+	/* The FC bit should be ignored because EDAT is off */
+	p[0] = 42;
+	protect_dat_entry(m, SEGMENT_ENTRY_FC, 4);
+	report(p[0] == 42, "pmd, fc=1, r/w");
+	unprotect_dat_entry(m, SEGMENT_ENTRY_FC, 4);
+	p[0] = 0;
+
+	/* Segment protection should work even with EDAT off */
+	protect_dat_entry(m, SEGMENT_ENTRY_P, 4);
+	expect_dat_fault();
+	p[0] = 42;
+	report(!p[0] && check_pgm_prot(m), "pmd, ro");
+	unprotect_dat_entry(m, SEGMENT_ENTRY_P, 4);
+
+	/* The FC bit should be ignored because EDAT is off*/
+	protect_dat_entry(m, REGION3_ENTRY_FC, 3);
+	p[0] = 42;
+	report(p[0] == 42, "pud, fc=1, r/w");
+	unprotect_dat_entry(m, REGION3_ENTRY_FC, 3);
+	p[0] = 0;
+
+	/* Region1/2/3 protection should not work, because EDAT is off */
+	protect_dat_entry(m, REGION_ENTRY_P, 3);
+	p[0] = 42;
+	report(p[0] == 42, "pud, ro");
+	unprotect_dat_entry(m, REGION_ENTRY_P, 3);
+	p[0] = 0;
+
+	protect_dat_entry(m, REGION_ENTRY_P, 2);
+	p[0] = 42;
+	report(p[0] == 42, "p4d, ro");
+	unprotect_dat_entry(m, REGION_ENTRY_P, 2);
+	p[0] = 0;
+
+	protect_dat_entry(m, REGION_ENTRY_P, 1);
+	p[0] = 42;
+	report(p[0] == 42, "pgd, ro");
+	unprotect_dat_entry(m, REGION_ENTRY_P, 1);
+	p[0] = 0;
+
+	report_prefix_pop();
+}
+
+static void test_edat1(void)
+{
+	report_prefix_push("edat1");
+	/* Enable EDAT */
+	ctl_set_bit(0, 23);
+	p[0] = 0;
+
+	/* Segment protection should work */
+	expect_dat_fault();
+	protect_dat_entry(m, SEGMENT_ENTRY_P, 4);
+	p[0] = 42;
+	report(!p[0] && check_pgm_prot(m), "pmd, ro");
+	unprotect_dat_entry(m, SEGMENT_ENTRY_P, 4);
+
+	/* Region1/2/3 protection should work now */
+	expect_dat_fault();
+	protect_dat_entry(m, REGION_ENTRY_P, 3);
+	p[0] = 42;
+	report(!p[0] && check_pgm_prot(m), "pud, ro");
+	unprotect_dat_entry(m, REGION_ENTRY_P, 3);
+
+	expect_dat_fault();
+	protect_dat_entry(m, REGION_ENTRY_P, 2);
+	p[0] = 42;
+	report(!p[0] && check_pgm_prot(m), "p4d, ro");
+	unprotect_dat_entry(m, REGION_ENTRY_P, 2);
+
+	expect_dat_fault();
+	protect_dat_entry(m, REGION_ENTRY_P, 1);
+	p[0] = 42;
+	report(!p[0] && check_pgm_prot(m), "pgd, ro");
+	unprotect_dat_entry(m, REGION_ENTRY_P, 1);
+
+	/* Large pages should work */
+	p[0] = 42;
+	install_large_page(root, 0, mem);
+	report(p[0] == 42, "pmd, large");
+
+	/* Prefixing should not work with large pages */
+	report(!memcmp(0, VIRT(prefix_buf), LC_SIZE) &&
+		!memcmp(prefix_buf, mem, LC_SIZE),
+		"pmd, large, prefixing");
+
+	report_prefix_pop();
+}
+
+static void test_edat2(void)
+{
+	report_prefix_push("edat2");
+	p[0] = 42;
+
+	/* Huge pages should work */
+	install_huge_page(root, 0, mem);
+	report(p[0] == 42, "pud, huge");
+
+	/* Prefixing should not work with huge pages */
+	report(!memcmp(0, VIRT(prefix_buf), LC_SIZE) &&
+		!memcmp(prefix_buf, mem, LC_SIZE),
+		"pmd, large, prefixing");
+
+	report_prefix_pop();
+}
+
+static unsigned int setup(void)
+{
+	bool has_edat1 = test_facility(8);
+	bool has_edat2 = test_facility(78);
+	unsigned long pa, va;
+
+	if (has_edat2 && !has_edat1)
+		report_abort("EDAT2 available, but EDAT1 not available");
+
+	/* Setup DAT 1:1 mapping and memory management */
+	setup_vm();
+	root = (void *)(stctg(1) & PAGE_MASK);
+
+	/*
+	 * Get a pgd worth of virtual memory, so we can test things later
+	 * without interfering with the test code or the interrupt handler
+	 */
+	mem = alloc_vpages_aligned(BIT_ULL(41), 41);
+	assert(mem);
+	va = (unsigned long)mem;
+
+	/* Map the first 1GB of real memory */
+	for (pa = 0; pa < SZ_1G; pa += PAGE_SIZE, va += PAGE_SIZE)
+		install_page(root, pa, (void *)va);
+
+	/* Move the lowcore to a known non-zero location */
+	assert((unsigned long)&prefix_buf < SZ_2G);
+	memcpy(prefix_buf, 0, LC_SIZE);
+	set_prefix((uint32_t)(intptr_t)prefix_buf);
+	/* Clear the old copy */
+	memset(prefix_buf, 0, LC_SIZE);
+
+	/* m will point to tmp through the new virtual mapping */
+	m = VIRT(&tmp);
+	/* p is the same as m but volatile */
+	p = (volatile unsigned int *)m;
+
+	return has_edat1 + has_edat2;
+}
+
+int main(void)
+{
+	unsigned int edat;
+
+	report_prefix_push("edat");
+	edat = setup();
+
+	test_dat();
+
+	if (edat)
+		test_edat1();
+	else
+		report_skip("EDAT not available");
+
+	if (edat >= 2)
+		test_edat2();
+	else
+		report_skip("EDAT2 not available");
+
+	report_prefix_pop();
+	return report_summary();
+}
diff --git a/s390x/unittests.cfg b/s390x/unittests.cfg
index 2298be6c..8da4a0a3 100644
--- a/s390x/unittests.cfg
+++ b/s390x/unittests.cfg
@@ -99,3 +99,6 @@  file = uv-guest.elf
 
 [sie]
 file = sie.elf
+
+[edat]
+file = edat.elf