diff mbox series

[5/7] x86/boot/compressed/64: Add CPUID sanity check to 32-bit boot-path

Message ID 20210210102135.30667-6-joro@8bytes.org (mailing list archive)
State New, archived
Headers show
Series x86/seves: Support 32-bit boot path and other updates | expand

Commit Message

Joerg Roedel Feb. 10, 2021, 10:21 a.m. UTC 
From: Joerg Roedel <jroedel@suse.de>

The 32-bit #VC handler has no GHCB and can only handle CPUID exit codes.
It is needed by the early boot code to handle #VC exceptions raised in
verify_cpu() and to get the position of the C bit.

But the CPUID information comes from the hypervisor, which is untrusted
and might return results which trick the guest into the no-SEV boot path
with no C bit set in the page-tables. All data written to memory would
then be unencrypted and could leak sensitive data to the hypervisor.

Add sanity checks to the 32-bit boot #VC handler to make sure the
hypervisor does not pretend that SEV is not enabled.

Signed-off-by: Joerg Roedel <jroedel@suse.de>
---
 arch/x86/boot/compressed/mem_encrypt.S | 36 ++++++++++++++++++++++++++
 1 file changed, 36 insertions(+)
diff mbox series

Patch

diff --git a/arch/x86/boot/compressed/mem_encrypt.S b/arch/x86/boot/compressed/mem_encrypt.S
index 350ecb56c7e4..091502cde070 100644
--- a/arch/x86/boot/compressed/mem_encrypt.S
+++ b/arch/x86/boot/compressed/mem_encrypt.S
@@ -126,6 +126,34 @@  SYM_CODE_START(startup32_vc_handler)
 	SEV_ES_REQ_CPUID fn=%ebx reg=3
 	movl	%edx, (%esp)
 
+	/*
+	 * Sanity check CPUID results from the Hypervisor. See comment in
+	 * do_vc_no_ghcb() for more details on why this is necessary.
+	 */
+
+	/* Fail if Hypervisor bit not set in CPUID[1].ECX[31] */
+	cmpl    $1, %ebx
+	jne     .Lcheck_leaf
+	btl     $31, 4(%esp)
+	jnc     .Lfail
+	jmp     .Ldone
+
+.Lcheck_leaf:
+	/* Fail if SEV leaf not available in CPUID[0x80000000].EAX */
+	cmpl    $0x80000000, %ebx
+	jne     .Lcheck_sev
+	cmpl    $0x8000001f, 12(%esp)
+	jb      .Lfail
+	jmp     .Ldone
+
+.Lcheck_sev:
+	/* Fail if SEV bit not set in CPUID[0x8000001f].EAX[1] */
+	cmpl    $0x8000001f, %ebx
+	jne     .Ldone
+	btl     $1, 12(%esp)
+	jnc     .Lfail
+
+.Ldone:
 	popl	%edx
 	popl	%ecx
 	popl	%ebx
@@ -139,6 +167,14 @@  SYM_CODE_START(startup32_vc_handler)
 
 	iret
 .Lfail:
+	/* Send terminate request to Hypervisor */
+	movl    $0x100, %eax
+	xorl    %edx, %edx
+	movl    $MSR_AMD64_SEV_ES_GHCB, %ecx
+	wrmsr
+	rep; vmmcall
+
+	/* If request fails, go to hlt loop */
 	hlt
 	jmp .Lfail
 SYM_CODE_END(startup32_vc_handler)