| Message ID | 20210219121337.76533-12-alexandru.elisei@arm.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | GIC fixes and improvements | expand |
Hi Alexandru, On 2/19/21 1:13 PM, Alexandru Elisei wrote: > The LPI code validates a result similarly to the IPI tests, by checking if > the target CPU received the interrupt with the expected interrupt number. > However, the LPI tests invent their own way of checking the test results by > creating a global struct (lpi_stats), using a separate interrupt handler > (lpi_handler) and test function (check_lpi_stats). > > There are several areas that can be improved in the LPI code, which are > already covered by the IPI tests: > > - check_lpi_stats() doesn't take into account that the target CPU can > receive the correct interrupt multiple times. > - check_lpi_stats() doesn't take into the account the scenarios where all > online CPUs can receive the interrupt, but the target CPU is the last CPU > that touches lpi_stats.observed. > - Insufficient or missing memory synchronization. > > Instead of duplicating code, let's convert the LPI tests to use > check_acked() and the same interrupt handler as the IPI tests, which has > been renamed to irq_handler() to avoid any confusion. > > check_lpi_stats() has been replaced with check_acked() which, together with > using irq_handler(), instantly gives us more correctness checks and proper > memory synchronization between threads. lpi_stats.expected has been > replaced by the CPU mask and the expected interrupt number arguments to > check_acked(), with no change in semantics. > > lpi_handler() aborted the test if the interrupt number was not an LPI. This > was changed in favor of allowing the test to continue, as it will fail in > check_acked(), but possibly print information useful for debugging. If the > test receives spurious interrupts, those are reported via report_info() at > the end of the test for consistency with the IPI tests, which don't treat > spurious interrupts as critical errors. > > In the spirit of code reuse, secondary_lpi_tests() has been replaced with > ipi_recv() because the two are now identical; ipi_recv() has been renamed > to irq_recv(), similarly to irq_handler(), to avoid confusion. > > CC: Eric Auger <eric.auger@redhat.com> > Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Thanks Eric > --- > arm/gic.c | 188 ++++++++++++++++++++++++------------------------------ > 1 file changed, 85 insertions(+), 103 deletions(-) > > diff --git a/arm/gic.c b/arm/gic.c > index 8bc2a35908f2..98135ef2cb06 100644 > --- a/arm/gic.c > +++ b/arm/gic.c > @@ -105,13 +105,12 @@ static bool check_acked(cpumask_t *mask, int sender, int irqnum) > ++missing; > else if (acked[cpu] > 1) > ++extra; > - } else { > - if (acked[cpu]) > + } else if (acked[cpu]) { > ++unexpected; > } > if (!acked[cpu]) > continue; > - smp_rmb(); /* pairs with smp_wmb in ipi_handler */ > + smp_rmb(); /* pairs with smp_wmb in irq_handler */ > > if (has_gicv2 && irq_sender[cpu] != sender) { > report_info("cpu%d received IPI from wrong sender %d", > @@ -149,11 +148,12 @@ static void check_spurious(void) > static int gic_get_sender(int irqstat) > { > if (gic_version() == 2) > + /* GICC_IAR.CPUID is RAZ for non-SGIs */ > return (irqstat >> 10) & 7; > return -1; > } > > -static void ipi_handler(struct pt_regs *regs __unused) > +static void irq_handler(struct pt_regs *regs __unused) > { > u32 irqstat = gic_read_iar(); > u32 irqnr = gic_iar_irqnr(irqstat); > @@ -185,75 +185,6 @@ static void setup_irq(irq_handler_fn handler) > } > > #if defined(__aarch64__) > -struct its_event { > - int cpu_id; > - int lpi_id; > -}; > - > -struct its_stats { > - struct its_event expected; > - struct its_event observed; > -}; > - > -static struct its_stats lpi_stats; > - > -static void lpi_handler(struct pt_regs *regs __unused) > -{ > - u32 irqstat = gic_read_iar(); > - int irqnr = gic_iar_irqnr(irqstat); > - > - gic_write_eoir(irqstat); > - assert(irqnr >= 8192); > - smp_rmb(); /* pairs with wmb in lpi_stats_expect */ > - lpi_stats.observed.cpu_id = smp_processor_id(); > - lpi_stats.observed.lpi_id = irqnr; > - acked[lpi_stats.observed.cpu_id]++; > - smp_wmb(); /* pairs with rmb in check_lpi_stats */ > -} > - > -static void lpi_stats_expect(int exp_cpu_id, int exp_lpi_id) > -{ > - lpi_stats.expected.cpu_id = exp_cpu_id; > - lpi_stats.expected.lpi_id = exp_lpi_id; > - lpi_stats.observed.cpu_id = -1; > - lpi_stats.observed.lpi_id = -1; > - smp_wmb(); /* pairs with rmb in handler */ > -} > - > -static void check_lpi_stats(const char *msg) > -{ > - int i; > - > - for (i = 0; i < 50; i++) { > - mdelay(100); > - smp_rmb(); /* pairs with wmb in lpi_handler */ > - if (lpi_stats.observed.cpu_id == lpi_stats.expected.cpu_id && > - lpi_stats.observed.lpi_id == lpi_stats.expected.lpi_id) { > - report(true, "%s", msg); > - return; > - } > - } > - > - if (lpi_stats.observed.cpu_id == -1 && lpi_stats.observed.lpi_id == -1) { > - report_info("No LPI received whereas (cpuid=%d, intid=%d) " > - "was expected", lpi_stats.expected.cpu_id, > - lpi_stats.expected.lpi_id); > - } else { > - report_info("Unexpected LPI (cpuid=%d, intid=%d)", > - lpi_stats.observed.cpu_id, > - lpi_stats.observed.lpi_id); > - } > - report(false, "%s", msg); > -} > - > -static void secondary_lpi_test(void) > -{ > - setup_irq(lpi_handler); > - cpumask_set_cpu(smp_processor_id(), &ready); > - while (1) > - wfi(); > -} > - > static void check_lpi_hits(int *expected, const char *msg) > { > bool pass = true; > @@ -347,7 +278,7 @@ static void ipi_test_smp(void) > > static void ipi_send(void) > { > - setup_irq(ipi_handler); > + setup_irq(irq_handler); > wait_on_ready(); > ipi_test_self(); > ipi_test_smp(); > @@ -355,9 +286,9 @@ static void ipi_send(void) > exit(report_summary()); > } > > -static void ipi_recv(void) > +static void irq_recv(void) > { > - setup_irq(ipi_handler); > + setup_irq(irq_handler); > cpumask_set_cpu(smp_processor_id(), &ready); > while (1) > wfi(); > @@ -368,7 +299,7 @@ static void ipi_test(void *data __unused) > if (smp_processor_id() == IPI_SENDER) > ipi_send(); > else > - ipi_recv(); > + irq_recv(); > } > > static struct gic gicv2 = { > @@ -696,14 +627,12 @@ static int its_prerequisites(int nb_cpus) > return -1; > } > > - stats_reset(); > - > - setup_irq(lpi_handler); > + setup_irq(irq_handler); > > for_each_present_cpu(cpu) { > if (cpu == 0) > continue; > - smp_boot_secondary(cpu, secondary_lpi_test); > + smp_boot_secondary(cpu, irq_recv); > } > wait_on_ready(); > > @@ -757,6 +686,7 @@ static void test_its_trigger(void) > { > struct its_collection *col3; > struct its_device *dev2, *dev7; > + cpumask_t mask; > > if (its_setup1()) > return; > @@ -767,13 +697,21 @@ static void test_its_trigger(void) > > report_prefix_push("int"); > > - lpi_stats_expect(3, 8195); > + stats_reset(); > + cpumask_clear(&mask); > + cpumask_set_cpu(3, &mask); > its_send_int(dev2, 20); > - check_lpi_stats("dev=2, eventid=20 -> lpi= 8195, col=3"); > + wait_for_interrupts(&mask); > + report(check_acked(&mask, 0, 8195), > + "dev=2, eventid=20 -> lpi= 8195, col=3"); > > - lpi_stats_expect(2, 8196); > + stats_reset(); > + cpumask_clear(&mask); > + cpumask_set_cpu(2, &mask); > its_send_int(dev7, 255); > - check_lpi_stats("dev=7, eventid=255 -> lpi= 8196, col=2"); > + wait_for_interrupts(&mask); > + report(check_acked(&mask, 0, 8196), > + "dev=7, eventid=255 -> lpi= 8196, col=2"); > > report_prefix_pop(); > > @@ -786,9 +724,12 @@ static void test_its_trigger(void) > gicv3_lpi_set_config(8195, LPI_PROP_DEFAULT & ~LPI_PROP_ENABLED); > its_send_inv(dev2, 20); > > - lpi_stats_expect(-1, -1); > + stats_reset(); > + cpumask_clear(&mask); > its_send_int(dev2, 20); > - check_lpi_stats("dev2/eventid=20 does not trigger any LPI"); > + wait_for_interrupts(&mask); > + report(check_acked(&mask, -1, -1), > + "dev2/eventid=20 does not trigger any LPI"); > > /* > * re-enable the LPI but willingly do not call invall > @@ -796,18 +737,29 @@ static void test_its_trigger(void) > * The LPI should not hit > */ > gicv3_lpi_set_config(8195, LPI_PROP_DEFAULT); > - lpi_stats_expect(-1, -1); > + stats_reset(); > + cpumask_clear(&mask); > its_send_int(dev2, 20); > - check_lpi_stats("dev2/eventid=20 still does not trigger any LPI"); > + wait_for_interrupts(&mask); > + report(check_acked(&mask, -1, -1), > + "dev2/eventid=20 still does not trigger any LPI"); > > /* Now call the invall and check the LPI hits */ > + stats_reset(); > + cpumask_clear(&mask); > + cpumask_set_cpu(3, &mask); > its_send_invall(col3); > - lpi_stats_expect(3, 8195); > - check_lpi_stats("dev2/eventid=20 pending LPI is received"); > + wait_for_interrupts(&mask); > + report(check_acked(&mask, 0, 8195), > + "dev2/eventid=20 pending LPI is received"); > > - lpi_stats_expect(3, 8195); > + stats_reset(); > + cpumask_clear(&mask); > + cpumask_set_cpu(3, &mask); > its_send_int(dev2, 20); > - check_lpi_stats("dev2/eventid=20 now triggers an LPI"); > + wait_for_interrupts(&mask); > + report(check_acked(&mask, 0, 8195), > + "dev2/eventid=20 now triggers an LPI"); > > report_prefix_pop(); > > @@ -818,9 +770,13 @@ static void test_its_trigger(void) > */ > > its_send_mapd(dev2, false); > - lpi_stats_expect(-1, -1); > + stats_reset(); > + cpumask_clear(&mask); > its_send_int(dev2, 20); > - check_lpi_stats("no LPI after device unmap"); > + wait_for_interrupts(&mask); > + report(check_acked(&mask, -1, -1), "no LPI after device unmap"); > + > + check_spurious(); > report_prefix_pop(); > } > > @@ -828,6 +784,7 @@ static void test_its_migration(void) > { > struct its_device *dev2, *dev7; > bool test_skipped = false; > + cpumask_t mask; > > if (its_setup1()) { > test_skipped = true; > @@ -844,13 +801,23 @@ do_migrate: > if (test_skipped) > return; > > - lpi_stats_expect(3, 8195); > + stats_reset(); > + cpumask_clear(&mask); > + cpumask_set_cpu(3, &mask); > its_send_int(dev2, 20); > - check_lpi_stats("dev2/eventid=20 triggers LPI 8195 on PE #3 after migration"); > + wait_for_interrupts(&mask); > + report(check_acked(&mask, 0, 8195), > + "dev2/eventid=20 triggers LPI 8195 on PE #3 after migration"); > > - lpi_stats_expect(2, 8196); > + stats_reset(); > + cpumask_clear(&mask); > + cpumask_set_cpu(2, &mask); > its_send_int(dev7, 255); > - check_lpi_stats("dev7/eventid=255 triggers LPI 8196 on PE #2 after migration"); > + wait_for_interrupts(&mask); > + report(check_acked(&mask, 0, 8196), > + "dev7/eventid=255 triggers LPI 8196 on PE #2 after migration"); > + > + check_spurious(); > } > > #define ERRATA_UNMAPPED_COLLECTIONS "ERRATA_8c58be34494b" > @@ -860,6 +827,7 @@ static void test_migrate_unmapped_collection(void) > struct its_collection *col = NULL; > struct its_device *dev2 = NULL, *dev7 = NULL; > bool test_skipped = false; > + cpumask_t mask; > int pe0 = 0; > u8 config; > > @@ -894,17 +862,27 @@ do_migrate: > its_send_mapc(col, true); > its_send_invall(col); > > - lpi_stats_expect(2, 8196); > + stats_reset(); > + cpumask_clear(&mask); > + cpumask_set_cpu(2, &mask); > its_send_int(dev7, 255); > - check_lpi_stats("dev7/eventid= 255 triggered LPI 8196 on PE #2"); > + wait_for_interrupts(&mask); > + report(check_acked(&mask, 0, 8196), > + "dev7/eventid= 255 triggered LPI 8196 on PE #2"); > > config = gicv3_lpi_get_config(8192); > report(config == LPI_PROP_DEFAULT, > "Config of LPI 8192 was properly migrated"); > > - lpi_stats_expect(pe0, 8192); > + stats_reset(); > + cpumask_clear(&mask); > + cpumask_set_cpu(pe0, &mask); > its_send_int(dev2, 0); > - check_lpi_stats("dev2/eventid = 0 triggered LPI 8192 on PE0"); > + wait_for_interrupts(&mask); > + report(check_acked(&mask, 0, 8192), > + "dev2/eventid = 0 triggered LPI 8192 on PE0"); > + > + check_spurious(); > } > > static void test_its_pending_migration(void) > @@ -961,6 +939,10 @@ static void test_its_pending_migration(void) > pendbaser = readq(ptr); > writeq(pendbaser & ~GICR_PENDBASER_PTZ, ptr); > > + /* > + * Reset and initialization values for acked are the same, so we don't > + * need to explicitely call stats_reset(). > + */ > gicv3_lpi_rdist_enable(pe0); > gicv3_lpi_rdist_enable(pe1); > >
diff --git a/arm/gic.c b/arm/gic.c index 8bc2a35908f2..98135ef2cb06 100644 --- a/arm/gic.c +++ b/arm/gic.c @@ -105,13 +105,12 @@ static bool check_acked(cpumask_t *mask, int sender, int irqnum) ++missing; else if (acked[cpu] > 1) ++extra; - } else { - if (acked[cpu]) + } else if (acked[cpu]) { ++unexpected; } if (!acked[cpu]) continue; - smp_rmb(); /* pairs with smp_wmb in ipi_handler */ + smp_rmb(); /* pairs with smp_wmb in irq_handler */ if (has_gicv2 && irq_sender[cpu] != sender) { report_info("cpu%d received IPI from wrong sender %d", @@ -149,11 +148,12 @@ static void check_spurious(void) static int gic_get_sender(int irqstat) { if (gic_version() == 2) + /* GICC_IAR.CPUID is RAZ for non-SGIs */ return (irqstat >> 10) & 7; return -1; } -static void ipi_handler(struct pt_regs *regs __unused) +static void irq_handler(struct pt_regs *regs __unused) { u32 irqstat = gic_read_iar(); u32 irqnr = gic_iar_irqnr(irqstat); @@ -185,75 +185,6 @@ static void setup_irq(irq_handler_fn handler) } #if defined(__aarch64__) -struct its_event { - int cpu_id; - int lpi_id; -}; - -struct its_stats { - struct its_event expected; - struct its_event observed; -}; - -static struct its_stats lpi_stats; - -static void lpi_handler(struct pt_regs *regs __unused) -{ - u32 irqstat = gic_read_iar(); - int irqnr = gic_iar_irqnr(irqstat); - - gic_write_eoir(irqstat); - assert(irqnr >= 8192); - smp_rmb(); /* pairs with wmb in lpi_stats_expect */ - lpi_stats.observed.cpu_id = smp_processor_id(); - lpi_stats.observed.lpi_id = irqnr; - acked[lpi_stats.observed.cpu_id]++; - smp_wmb(); /* pairs with rmb in check_lpi_stats */ -} - -static void lpi_stats_expect(int exp_cpu_id, int exp_lpi_id) -{ - lpi_stats.expected.cpu_id = exp_cpu_id; - lpi_stats.expected.lpi_id = exp_lpi_id; - lpi_stats.observed.cpu_id = -1; - lpi_stats.observed.lpi_id = -1; - smp_wmb(); /* pairs with rmb in handler */ -} - -static void check_lpi_stats(const char *msg) -{ - int i; - - for (i = 0; i < 50; i++) { - mdelay(100); - smp_rmb(); /* pairs with wmb in lpi_handler */ - if (lpi_stats.observed.cpu_id == lpi_stats.expected.cpu_id && - lpi_stats.observed.lpi_id == lpi_stats.expected.lpi_id) { - report(true, "%s", msg); - return; - } - } - - if (lpi_stats.observed.cpu_id == -1 && lpi_stats.observed.lpi_id == -1) { - report_info("No LPI received whereas (cpuid=%d, intid=%d) " - "was expected", lpi_stats.expected.cpu_id, - lpi_stats.expected.lpi_id); - } else { - report_info("Unexpected LPI (cpuid=%d, intid=%d)", - lpi_stats.observed.cpu_id, - lpi_stats.observed.lpi_id); - } - report(false, "%s", msg); -} - -static void secondary_lpi_test(void) -{ - setup_irq(lpi_handler); - cpumask_set_cpu(smp_processor_id(), &ready); - while (1) - wfi(); -} - static void check_lpi_hits(int *expected, const char *msg) { bool pass = true; @@ -347,7 +278,7 @@ static void ipi_test_smp(void) static void ipi_send(void) { - setup_irq(ipi_handler); + setup_irq(irq_handler); wait_on_ready(); ipi_test_self(); ipi_test_smp(); @@ -355,9 +286,9 @@ static void ipi_send(void) exit(report_summary()); } -static void ipi_recv(void) +static void irq_recv(void) { - setup_irq(ipi_handler); + setup_irq(irq_handler); cpumask_set_cpu(smp_processor_id(), &ready); while (1) wfi(); @@ -368,7 +299,7 @@ static void ipi_test(void *data __unused) if (smp_processor_id() == IPI_SENDER) ipi_send(); else - ipi_recv(); + irq_recv(); } static struct gic gicv2 = { @@ -696,14 +627,12 @@ static int its_prerequisites(int nb_cpus) return -1; } - stats_reset(); - - setup_irq(lpi_handler); + setup_irq(irq_handler); for_each_present_cpu(cpu) { if (cpu == 0) continue; - smp_boot_secondary(cpu, secondary_lpi_test); + smp_boot_secondary(cpu, irq_recv); } wait_on_ready(); @@ -757,6 +686,7 @@ static void test_its_trigger(void) { struct its_collection *col3; struct its_device *dev2, *dev7; + cpumask_t mask; if (its_setup1()) return; @@ -767,13 +697,21 @@ static void test_its_trigger(void) report_prefix_push("int"); - lpi_stats_expect(3, 8195); + stats_reset(); + cpumask_clear(&mask); + cpumask_set_cpu(3, &mask); its_send_int(dev2, 20); - check_lpi_stats("dev=2, eventid=20 -> lpi= 8195, col=3"); + wait_for_interrupts(&mask); + report(check_acked(&mask, 0, 8195), + "dev=2, eventid=20 -> lpi= 8195, col=3"); - lpi_stats_expect(2, 8196); + stats_reset(); + cpumask_clear(&mask); + cpumask_set_cpu(2, &mask); its_send_int(dev7, 255); - check_lpi_stats("dev=7, eventid=255 -> lpi= 8196, col=2"); + wait_for_interrupts(&mask); + report(check_acked(&mask, 0, 8196), + "dev=7, eventid=255 -> lpi= 8196, col=2"); report_prefix_pop(); @@ -786,9 +724,12 @@ static void test_its_trigger(void) gicv3_lpi_set_config(8195, LPI_PROP_DEFAULT & ~LPI_PROP_ENABLED); its_send_inv(dev2, 20); - lpi_stats_expect(-1, -1); + stats_reset(); + cpumask_clear(&mask); its_send_int(dev2, 20); - check_lpi_stats("dev2/eventid=20 does not trigger any LPI"); + wait_for_interrupts(&mask); + report(check_acked(&mask, -1, -1), + "dev2/eventid=20 does not trigger any LPI"); /* * re-enable the LPI but willingly do not call invall @@ -796,18 +737,29 @@ static void test_its_trigger(void) * The LPI should not hit */ gicv3_lpi_set_config(8195, LPI_PROP_DEFAULT); - lpi_stats_expect(-1, -1); + stats_reset(); + cpumask_clear(&mask); its_send_int(dev2, 20); - check_lpi_stats("dev2/eventid=20 still does not trigger any LPI"); + wait_for_interrupts(&mask); + report(check_acked(&mask, -1, -1), + "dev2/eventid=20 still does not trigger any LPI"); /* Now call the invall and check the LPI hits */ + stats_reset(); + cpumask_clear(&mask); + cpumask_set_cpu(3, &mask); its_send_invall(col3); - lpi_stats_expect(3, 8195); - check_lpi_stats("dev2/eventid=20 pending LPI is received"); + wait_for_interrupts(&mask); + report(check_acked(&mask, 0, 8195), + "dev2/eventid=20 pending LPI is received"); - lpi_stats_expect(3, 8195); + stats_reset(); + cpumask_clear(&mask); + cpumask_set_cpu(3, &mask); its_send_int(dev2, 20); - check_lpi_stats("dev2/eventid=20 now triggers an LPI"); + wait_for_interrupts(&mask); + report(check_acked(&mask, 0, 8195), + "dev2/eventid=20 now triggers an LPI"); report_prefix_pop(); @@ -818,9 +770,13 @@ static void test_its_trigger(void) */ its_send_mapd(dev2, false); - lpi_stats_expect(-1, -1); + stats_reset(); + cpumask_clear(&mask); its_send_int(dev2, 20); - check_lpi_stats("no LPI after device unmap"); + wait_for_interrupts(&mask); + report(check_acked(&mask, -1, -1), "no LPI after device unmap"); + + check_spurious(); report_prefix_pop(); } @@ -828,6 +784,7 @@ static void test_its_migration(void) { struct its_device *dev2, *dev7; bool test_skipped = false; + cpumask_t mask; if (its_setup1()) { test_skipped = true; @@ -844,13 +801,23 @@ do_migrate: if (test_skipped) return; - lpi_stats_expect(3, 8195); + stats_reset(); + cpumask_clear(&mask); + cpumask_set_cpu(3, &mask); its_send_int(dev2, 20); - check_lpi_stats("dev2/eventid=20 triggers LPI 8195 on PE #3 after migration"); + wait_for_interrupts(&mask); + report(check_acked(&mask, 0, 8195), + "dev2/eventid=20 triggers LPI 8195 on PE #3 after migration"); - lpi_stats_expect(2, 8196); + stats_reset(); + cpumask_clear(&mask); + cpumask_set_cpu(2, &mask); its_send_int(dev7, 255); - check_lpi_stats("dev7/eventid=255 triggers LPI 8196 on PE #2 after migration"); + wait_for_interrupts(&mask); + report(check_acked(&mask, 0, 8196), + "dev7/eventid=255 triggers LPI 8196 on PE #2 after migration"); + + check_spurious(); } #define ERRATA_UNMAPPED_COLLECTIONS "ERRATA_8c58be34494b" @@ -860,6 +827,7 @@ static void test_migrate_unmapped_collection(void) struct its_collection *col = NULL; struct its_device *dev2 = NULL, *dev7 = NULL; bool test_skipped = false; + cpumask_t mask; int pe0 = 0; u8 config; @@ -894,17 +862,27 @@ do_migrate: its_send_mapc(col, true); its_send_invall(col); - lpi_stats_expect(2, 8196); + stats_reset(); + cpumask_clear(&mask); + cpumask_set_cpu(2, &mask); its_send_int(dev7, 255); - check_lpi_stats("dev7/eventid= 255 triggered LPI 8196 on PE #2"); + wait_for_interrupts(&mask); + report(check_acked(&mask, 0, 8196), + "dev7/eventid= 255 triggered LPI 8196 on PE #2"); config = gicv3_lpi_get_config(8192); report(config == LPI_PROP_DEFAULT, "Config of LPI 8192 was properly migrated"); - lpi_stats_expect(pe0, 8192); + stats_reset(); + cpumask_clear(&mask); + cpumask_set_cpu(pe0, &mask); its_send_int(dev2, 0); - check_lpi_stats("dev2/eventid = 0 triggered LPI 8192 on PE0"); + wait_for_interrupts(&mask); + report(check_acked(&mask, 0, 8192), + "dev2/eventid = 0 triggered LPI 8192 on PE0"); + + check_spurious(); } static void test_its_pending_migration(void) @@ -961,6 +939,10 @@ static void test_its_pending_migration(void) pendbaser = readq(ptr); writeq(pendbaser & ~GICR_PENDBASER_PTZ, ptr); + /* + * Reset and initialization values for acked are the same, so we don't + * need to explicitely call stats_reset(). + */ gicv3_lpi_rdist_enable(pe0); gicv3_lpi_rdist_enable(pe1);
The LPI code validates a result similarly to the IPI tests, by checking if the target CPU received the interrupt with the expected interrupt number. However, the LPI tests invent their own way of checking the test results by creating a global struct (lpi_stats), using a separate interrupt handler (lpi_handler) and test function (check_lpi_stats). There are several areas that can be improved in the LPI code, which are already covered by the IPI tests: - check_lpi_stats() doesn't take into account that the target CPU can receive the correct interrupt multiple times. - check_lpi_stats() doesn't take into the account the scenarios where all online CPUs can receive the interrupt, but the target CPU is the last CPU that touches lpi_stats.observed. - Insufficient or missing memory synchronization. Instead of duplicating code, let's convert the LPI tests to use check_acked() and the same interrupt handler as the IPI tests, which has been renamed to irq_handler() to avoid any confusion. check_lpi_stats() has been replaced with check_acked() which, together with using irq_handler(), instantly gives us more correctness checks and proper memory synchronization between threads. lpi_stats.expected has been replaced by the CPU mask and the expected interrupt number arguments to check_acked(), with no change in semantics. lpi_handler() aborted the test if the interrupt number was not an LPI. This was changed in favor of allowing the test to continue, as it will fail in check_acked(), but possibly print information useful for debugging. If the test receives spurious interrupts, those are reported via report_info() at the end of the test for consistency with the IPI tests, which don't treat spurious interrupts as critical errors. In the spirit of code reuse, secondary_lpi_tests() has been replaced with ipi_recv() because the two are now identical; ipi_recv() has been renamed to irq_recv(), similarly to irq_handler(), to avoid confusion. CC: Eric Auger <eric.auger@redhat.com> Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com> --- arm/gic.c | 188 ++++++++++++++++++++++++------------------------------ 1 file changed, 85 insertions(+), 103 deletions(-)