diff mbox series

[v11,5/7] KVM: stats: Add documentation for binary statistics interface

Message ID 20210618044819.3690166-6-jingzhangos@google.com (mailing list archive)
State New, archived
Headers show
Series KVM statistics data fd-based binary interface | expand

Commit Message

Jing Zhang June 18, 2021, 4:48 a.m. UTC
This new API provides a file descriptor for every VM and VCPU to read
KVM statistics data in binary format.
It is meant to provide a lightweight, flexible, scalable and efficient
lock-free solution for user space telemetry applications to pull the
statistics data periodically for large scale systems. The pulling
frequency could be as high as a few times per second.
The statistics descriptors are defined by KVM in kernel and can be
by userspace to discover VM/VCPU statistics during the one-time setup
stage.
The statistics data itself could be read out by userspace telemetry
periodically without any extra parsing or setup effort.
There are a few existed interface protocols and definitions, but no
one can fulfil all the requirements this interface implemented as
below:
1. During high frequency periodic stats reading, there should be no
   extra efforts except the stats data read itself.
2. Support stats annotation, like type (cumulative, instantaneous,
   peak, histogram, etc) and unit (counter, time, size, cycles, etc).
3. The stats data reading should be free of lock/synchronization. We
   don't care about the consistency between all the stats data. All
   stats data can not be read out at exactly the same time. We really
   care about the change or trend of the stats data. The lock-free
   solution is not just for efficiency and scalability, also for the
   stats data accuracy and usability. For example, in the situation
   that all the stats data readings are protected by a global lock,
   if one VCPU died somehow with that lock held, then all stats data
   reading would be blocked, then we have no way from stats data that
   which VCPU has died.
4. The stats data reading workload can be handed over to other
   unprivileged process.

Reviewed-by: David Matlack <dmatlack@google.com>
Reviewed-by: Ricardo Koller <ricarkol@google.com>
Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
Reviewed-by: Fuad Tabba <tabba@google.com>
Signed-off-by: Jing Zhang <jingzhangos@google.com>
---
 Documentation/virt/kvm/api.rst | 176 ++++++++++++++++++++++++++++++++-
 1 file changed, 175 insertions(+), 1 deletion(-)

Comments

Greg Kroah-Hartman June 18, 2021, 7:02 a.m. UTC | #1
On Fri, Jun 18, 2021 at 04:48:17AM +0000, Jing Zhang wrote:
> This new API provides a file descriptor for every VM and VCPU to read
> KVM statistics data in binary format.
> It is meant to provide a lightweight, flexible, scalable and efficient
> lock-free solution for user space telemetry applications to pull the
> statistics data periodically for large scale systems. The pulling
> frequency could be as high as a few times per second.
> The statistics descriptors are defined by KVM in kernel and can be
> by userspace to discover VM/VCPU statistics during the one-time setup
> stage.
> The statistics data itself could be read out by userspace telemetry
> periodically without any extra parsing or setup effort.
> There are a few existed interface protocols and definitions, but no
> one can fulfil all the requirements this interface implemented as
> below:
> 1. During high frequency periodic stats reading, there should be no
>    extra efforts except the stats data read itself.
> 2. Support stats annotation, like type (cumulative, instantaneous,
>    peak, histogram, etc) and unit (counter, time, size, cycles, etc).
> 3. The stats data reading should be free of lock/synchronization. We
>    don't care about the consistency between all the stats data. All
>    stats data can not be read out at exactly the same time. We really
>    care about the change or trend of the stats data. The lock-free
>    solution is not just for efficiency and scalability, also for the
>    stats data accuracy and usability. For example, in the situation
>    that all the stats data readings are protected by a global lock,
>    if one VCPU died somehow with that lock held, then all stats data
>    reading would be blocked, then we have no way from stats data that
>    which VCPU has died.
> 4. The stats data reading workload can be handed over to other
>    unprivileged process.
> 
> Reviewed-by: David Matlack <dmatlack@google.com>
> Reviewed-by: Ricardo Koller <ricarkol@google.com>
> Reviewed-by: Krish Sadhukhan <krish.sadhukhan@oracle.com>
> Reviewed-by: Fuad Tabba <tabba@google.com>
> Signed-off-by: Jing Zhang <jingzhangos@google.com>
> ---
>  Documentation/virt/kvm/api.rst | 176 ++++++++++++++++++++++++++++++++-
>  1 file changed, 175 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst
> index e328caa35d6c..7ca1c8d190c0 100644
> --- a/Documentation/virt/kvm/api.rst
> +++ b/Documentation/virt/kvm/api.rst
> @@ -5034,7 +5034,6 @@ see KVM_XEN_VCPU_SET_ATTR above.
>  The KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_ADJUST type may not be used
>  with the KVM_XEN_VCPU_GET_ATTR ioctl.
>  
> -
>  4.131 KVM_GET_SREGS2
>  ------------------
>  
> @@ -5081,6 +5080,173 @@ Writes special registers into the vcpu.
>  See KVM_GET_SREGS2 for the data structures.
>  This ioctl (when supported) replaces the KVM_SET_SREGS.
>  
> +4.133 KVM_GET_STATS_FD
> +----------------------
> +
> +:Capability: KVM_CAP_STATS_BINARY_FD
> +:Architectures: all
> +:Type: vm ioctl, vcpu ioctl
> +:Parameters: none
> +:Returns: statistics file descriptor on success, < 0 on error
> +
> +Errors:
> +
> +  ======     ======================================================
> +  ENOMEM     if the fd could not be created due to lack of memory
> +  EMFILE     if the number of opened files exceeds the limit
> +  ======     ======================================================
> +
> +The file descriptor can be used to read VM/vCPU statistics data in binary
> +format. The file data is organized into three blocks as below:
> ++-------------+
> +|   Header    |
> ++-------------+
> +| Descriptors |
> ++-------------+
> +| Stats Data  |
> ++-------------+
> +
> +The Header block is always at the start of the file. It is only needed to be
> +read one time for the lifetime of the file descriptor.
> +It is in the form of ``struct kvm_stats_header`` as below::
> +
> +	#define KVM_STATS_ID_MAXLEN		64
> +
> +	struct kvm_stats_header {
> +		__u32 name_size;
> +		__u32 count;
> +		__u32 desc_offset;
> +		__u32 data_offset;
> +		char id[];
> +	};
> +
> +The ``id`` field is a '\0' terminated string which identifies the corresponding
> +KVM statistics. For VM statistics, it is in the form of "kvm-{kvm pid}", like
> +"kvm-12345". For VCPU statistics, it is in the form of
> +"kvm-{kvm pid}/vcpu-{vcpu id}", like "kvm-12345/vcpu-12".
> +
> +The ``name_size`` field is the size (in byte) of the statistics name string
> +(including trailing '\0') appended to the end of every statistics descriptor.
> +
> +The ``count`` field is the number of statistics.
> +
> +The ``desc_offset`` field is the offset of the Descriptors block from the start
> +of the file indicated by the file descriptor.
> +
> +The ``data_offset`` field is the offset of the Stats Data block from the start
> +of the file indicated by the file descriptor.
> +
> +The Descriptors block is only needed to be read once for the lifetime of the
> +file descriptor. It is an array of ``struct kvm_stats_desc`` as shown in
> +below code block::
> +
> +	#define KVM_STATS_TYPE_SHIFT		0
> +	#define KVM_STATS_TYPE_MASK		(0xF << KVM_STATS_TYPE_SHIFT)
> +	#define KVM_STATS_TYPE_CUMULATIVE	(0x0 << KVM_STATS_TYPE_SHIFT)
> +	#define KVM_STATS_TYPE_INSTANT		(0x1 << KVM_STATS_TYPE_SHIFT)
> +	#define KVM_STATS_TYPE_MAX		KVM_STATS_TYPE_INSTANT
> +
> +	#define KVM_STATS_UNIT_SHIFT		4
> +	#define KVM_STATS_UNIT_MASK		(0xF << KVM_STATS_UNIT_SHIFT)
> +	#define KVM_STATS_UNIT_NONE		(0x0 << KVM_STATS_UNIT_SHIFT)
> +	#define KVM_STATS_UNIT_BYTES		(0x1 << KVM_STATS_UNIT_SHIFT)
> +	#define KVM_STATS_UNIT_SECONDS		(0x2 << KVM_STATS_UNIT_SHIFT)
> +	#define KVM_STATS_UNIT_CYCLES		(0x3 << KVM_STATS_UNIT_SHIFT)
> +	#define KVM_STATS_UNIT_MAX		KVM_STATS_UNIT_CYCLES
> +
> +	#define KVM_STATS_BASE_SHIFT		8
> +	#define KVM_STATS_BASE_MASK		(0xF << KVM_STATS_BASE_SHIFT)
> +	#define KVM_STATS_BASE_POW10		(0x0 << KVM_STATS_BASE_SHIFT)
> +	#define KVM_STATS_BASE_POW2		(0x1 << KVM_STATS_BASE_SHIFT)
> +	#define KVM_STATS_BASE_MAX		KVM_STATS_BASE_POW2
> +
> +	struct kvm_stats_desc {
> +		__u32 flags;
> +		__s16 exponent;
> +		__u16 size;
> +		__u32 offset;
> +		__u32 unused;
> +		char name[];
> +	};

As I mention in another patch, this should be sucked in directly from
the .h file in kerneldoc format, so that everything stays in sync.  I
bet almost this whole file can be put into the .h file, look at how drm
and v4l2 does this in a way that you only have to write the above one
time, not try to keep it in sync in two different places.

thanks,

greg k-h
Paolo Bonzini June 18, 2021, 8:26 a.m. UTC | #2
On 18/06/21 09:02, Greg KH wrote:
>> +	struct kvm_stats_desc {
>> +		__u32 flags;
>> +		__s16 exponent;
>> +		__u16 size;
>> +		__u32 offset;
>> +		__u32 unused;
>> +		char name[];
>> +	};
> As I mention in another patch, this should be sucked in directly from
> the .h file in kerneldoc format, so that everything stays in sync.  I
> bet almost this whole file can be put into the .h file, look at how drm
> and v4l2 does this in a way that you only have to write the above one
> time, not try to keep it in sync in two different places.

V4L's userspace-api/media/v4l is absurdly good and I'd say it's by far 
the best documentation of any Linux subsystem, but it's all handwritten 
just like in KVM.  In fact, grepping for kernel-doc directives in 
Documentation/ gives no hits for the V4L uAPI documentation.

DRM has great kernel documentation, but quality-wise the KVM userland 
documentation is on a completely different level compared to DRM; just 
compare https://www.kernel.org/doc/html/latest/virt/kvm/api.html to 
https://www.kernel.org/doc/html/latest/gpu/drm-uapi.html.  The latter is 
not about how to use the DRM interfaces from userspace, it's about how 
to implement the userspace interfaces.  It is full of kernel struct 
definitions that should have no place in a uAPI manual, and does not 
include documentation for almost anything in include/uapi/drm/drm.h

Paolo
Greg Kroah-Hartman June 18, 2021, 8:31 a.m. UTC | #3
On Fri, Jun 18, 2021 at 10:26:59AM +0200, Paolo Bonzini wrote:
> On 18/06/21 09:02, Greg KH wrote:
> > > +	struct kvm_stats_desc {
> > > +		__u32 flags;
> > > +		__s16 exponent;
> > > +		__u16 size;
> > > +		__u32 offset;
> > > +		__u32 unused;
> > > +		char name[];
> > > +	};
> > As I mention in another patch, this should be sucked in directly from
> > the .h file in kerneldoc format, so that everything stays in sync.  I
> > bet almost this whole file can be put into the .h file, look at how drm
> > and v4l2 does this in a way that you only have to write the above one
> > time, not try to keep it in sync in two different places.
> 
> V4L's userspace-api/media/v4l is absurdly good and I'd say it's by far the
> best documentation of any Linux subsystem, but it's all handwritten just
> like in KVM.  In fact, grepping for kernel-doc directives in Documentation/
> gives no hits for the V4L uAPI documentation.
> 
> DRM has great kernel documentation, but quality-wise the KVM userland
> documentation is on a completely different level compared to DRM; just
> compare https://www.kernel.org/doc/html/latest/virt/kvm/api.html to
> https://www.kernel.org/doc/html/latest/gpu/drm-uapi.html.  The latter is not
> about how to use the DRM interfaces from userspace, it's about how to
> implement the userspace interfaces.  It is full of kernel struct definitions
> that should have no place in a uAPI manual, and does not include
> documentation for almost anything in include/uapi/drm/drm.h

Ok, it's your maintenance burden, not mine, I was just suggesting a way
to make it easier :)

I'll not complain about this anymore...

thanks,

greg k-h
Paolo Bonzini June 18, 2021, 8:37 a.m. UTC | #4
On 18/06/21 10:31, Greg KH wrote:
> Ok, it's your maintenance burden, not mine, I was just suggesting a way
> to make it easier :)
> 
> I'll not complain about this anymore...

I wish there was a way to keep them in sync without either sacrificing 
the quality of the documentation or reading kvm.h 100 times, I would 
jump on it!

Paolo
diff mbox series

Patch

diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst
index e328caa35d6c..7ca1c8d190c0 100644
--- a/Documentation/virt/kvm/api.rst
+++ b/Documentation/virt/kvm/api.rst
@@ -5034,7 +5034,6 @@  see KVM_XEN_VCPU_SET_ATTR above.
 The KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_ADJUST type may not be used
 with the KVM_XEN_VCPU_GET_ATTR ioctl.
 
-
 4.131 KVM_GET_SREGS2
 ------------------
 
@@ -5081,6 +5080,173 @@  Writes special registers into the vcpu.
 See KVM_GET_SREGS2 for the data structures.
 This ioctl (when supported) replaces the KVM_SET_SREGS.
 
+4.133 KVM_GET_STATS_FD
+----------------------
+
+:Capability: KVM_CAP_STATS_BINARY_FD
+:Architectures: all
+:Type: vm ioctl, vcpu ioctl
+:Parameters: none
+:Returns: statistics file descriptor on success, < 0 on error
+
+Errors:
+
+  ======     ======================================================
+  ENOMEM     if the fd could not be created due to lack of memory
+  EMFILE     if the number of opened files exceeds the limit
+  ======     ======================================================
+
+The file descriptor can be used to read VM/vCPU statistics data in binary
+format. The file data is organized into three blocks as below:
++-------------+
+|   Header    |
++-------------+
+| Descriptors |
++-------------+
+| Stats Data  |
++-------------+
+
+The Header block is always at the start of the file. It is only needed to be
+read one time for the lifetime of the file descriptor.
+It is in the form of ``struct kvm_stats_header`` as below::
+
+	#define KVM_STATS_ID_MAXLEN		64
+
+	struct kvm_stats_header {
+		__u32 name_size;
+		__u32 count;
+		__u32 desc_offset;
+		__u32 data_offset;
+		char id[];
+	};
+
+The ``id`` field is a '\0' terminated string which identifies the corresponding
+KVM statistics. For VM statistics, it is in the form of "kvm-{kvm pid}", like
+"kvm-12345". For VCPU statistics, it is in the form of
+"kvm-{kvm pid}/vcpu-{vcpu id}", like "kvm-12345/vcpu-12".
+
+The ``name_size`` field is the size (in byte) of the statistics name string
+(including trailing '\0') appended to the end of every statistics descriptor.
+
+The ``count`` field is the number of statistics.
+
+The ``desc_offset`` field is the offset of the Descriptors block from the start
+of the file indicated by the file descriptor.
+
+The ``data_offset`` field is the offset of the Stats Data block from the start
+of the file indicated by the file descriptor.
+
+The Descriptors block is only needed to be read once for the lifetime of the
+file descriptor. It is an array of ``struct kvm_stats_desc`` as shown in
+below code block::
+
+	#define KVM_STATS_TYPE_SHIFT		0
+	#define KVM_STATS_TYPE_MASK		(0xF << KVM_STATS_TYPE_SHIFT)
+	#define KVM_STATS_TYPE_CUMULATIVE	(0x0 << KVM_STATS_TYPE_SHIFT)
+	#define KVM_STATS_TYPE_INSTANT		(0x1 << KVM_STATS_TYPE_SHIFT)
+	#define KVM_STATS_TYPE_MAX		KVM_STATS_TYPE_INSTANT
+
+	#define KVM_STATS_UNIT_SHIFT		4
+	#define KVM_STATS_UNIT_MASK		(0xF << KVM_STATS_UNIT_SHIFT)
+	#define KVM_STATS_UNIT_NONE		(0x0 << KVM_STATS_UNIT_SHIFT)
+	#define KVM_STATS_UNIT_BYTES		(0x1 << KVM_STATS_UNIT_SHIFT)
+	#define KVM_STATS_UNIT_SECONDS		(0x2 << KVM_STATS_UNIT_SHIFT)
+	#define KVM_STATS_UNIT_CYCLES		(0x3 << KVM_STATS_UNIT_SHIFT)
+	#define KVM_STATS_UNIT_MAX		KVM_STATS_UNIT_CYCLES
+
+	#define KVM_STATS_BASE_SHIFT		8
+	#define KVM_STATS_BASE_MASK		(0xF << KVM_STATS_BASE_SHIFT)
+	#define KVM_STATS_BASE_POW10		(0x0 << KVM_STATS_BASE_SHIFT)
+	#define KVM_STATS_BASE_POW2		(0x1 << KVM_STATS_BASE_SHIFT)
+	#define KVM_STATS_BASE_MAX		KVM_STATS_BASE_POW2
+
+	struct kvm_stats_desc {
+		__u32 flags;
+		__s16 exponent;
+		__u16 size;
+		__u32 offset;
+		__u32 unused;
+		char name[];
+	};
+
+The ``flags`` field contains the type and unit of the statistics data described
+by this descriptor. Its endianness is CPU native.
+The following flags are supported:
+
+Bits 0-3 of ``flags`` encode the type:
+  * ``KVM_STATS_TYPE_CUMULATIVE``
+    The statistics data is cumulative. The value of data can only be increased.
+    Most of the counters used in KVM are of this type.
+    The corresponding ``count`` field for this type is always 1.
+  * ``KVM_STATS_TYPE_INSTANT``
+    The statistics data is instantaneous. Its value can be increased or
+    decreased. This type is usually used as a measurement of some resources,
+    like the number of dirty pages, the number of large pages, etc.
+    The corresponding ``count`` field for this type is always 1.
+
+Bits 4-7 of ``flags`` encode the unit:
+  * ``KVM_STATS_UNIT_NONE``
+    There is no unit for the value of statistics data. This usually means that
+    the value is a simple counter of an event.
+  * ``KVM_STATS_UNIT_BYTES``
+    It indicates that the statistics data is used to measure memory size, in the
+    unit of Byte, KiByte, MiByte, GiByte, etc. The unit of the data is
+    determined by the ``exponent`` field in the descriptor. The
+    ``KVM_STATS_BASE_POW2`` flag is valid in this case. The unit of the data is
+    determined by ``pow(2, exponent)``. For example, if value is 10,
+    ``exponent`` is 20, which means the unit of statistics data is MiByte, we
+    can get the statistics data in the unit of Byte by
+    ``value * pow(2, exponent) = 10 * pow(2, 20) = 10 MiByte`` which is
+    10 * 1024 * 1024 Bytes.
+  * ``KVM_STATS_UNIT_SECONDS``
+    It indicates that the statistics data is used to measure time/latency, in
+    the unit of nanosecond, microsecond, millisecond and second. The unit of the
+    data is determined by the ``exponent`` field in the descriptor. The
+    ``KVM_STATS_BASE_POW10`` flag is valid in this case. The unit of the data
+    is determined by ``pow(10, exponent)``. For example, if value is 2000000,
+    ``exponent`` is -6, which means the unit of statistics data is microsecond,
+    we can get the statistics data in the unit of second by
+    ``value * pow(10, exponent) = 2000000 * pow(10, -6) = 2 seconds``.
+  * ``KVM_STATS_UNIT_CYCLES``
+    It indicates that the statistics data is used to measure CPU clock cycles.
+    The ``KVM_STATS_BASE_POW10`` flag is valid in this case. For example, if
+    value is 200, ``exponent`` is 4, we can get the number of CPU clock cycles
+    by ``value * pow(10, exponent) = 200 * pow(10, 4) = 2000000``.
+
+Bits 8-11 of ``flags`` encode the base:
+  * ``KVM_STATS_BASE_POW10``
+    The scale is based on power of 10. It is used for measurement of time and
+    CPU clock cycles.
+  * ``KVM_STATS_BASE_POW2``
+    The scale is based on power of 2. It is used for measurement of memory size.
+
+The ``exponent`` field is the scale of corresponding statistics data. For
+example, if the unit is ``KVM_STATS_UNIT_BYTES``, the base is
+``KVM_STATS_BASE_POW2``, the ``exponent`` is 10, then we know that the real
+unit of the statistics data is KBytes a.k.a pow(2, 10) = 1024 bytes.
+If the unit is ``KVM_STATS_UNIT_SECONDS``, the base is ``KVM_STATS_BASE_POW10``,
+the ``exponent`` is -6, then we know that the real unit of the statistics data
+is microsecond a.k.a 1 second * pow(10, -6) = 1 microsecond.
+
+The ``size`` field is the number of values of this statistics data. Its
+value is usually 1 for most of simple statistics. 1 means it contains an
+unsigned 64bit data.
+
+The ``offset`` field is the offset from the start of Data Block to the start of
+the corresponding statistics data.
+
+The ``unused`` fields are reserved for future support for other types of
+statistics data, like log/linear histogram. Its current value is always 0.
+
+The ``name`` field is the name string of the statistics data. The name string
+starts at the end of ``struct kvm_stats_desc``.
+The maximum length (including trailing '\0') is indicated by ``name_size``
+in ``struct kvm_stats_header``.
+
+The Stats Data block contains an array of statistics data whose type is __u64.
+It would be read out by userspace periodically.
+The order of data value in Stats Data block is the same as the order of
+descriptors in Descriptors block.
 
 5. The kvm_run structure
 ========================
@@ -6969,3 +7135,11 @@  The argument to KVM_ENABLE_CAP is also a bitmask, and must be a subset
 of the result of KVM_CHECK_EXTENSION.  KVM will forward to userspace
 the hypercalls whose corresponding bit is in the argument, and return
 ENOSYS for the others.
+
+8.35 KVM_CAP_STATS_BINARY_FD
+----------------------------
+
+:Architectures: all
+
+This capability indicates the feature that userspace can create get a file
+descriptor for every VM and VCPU to read statistics data in binary format.