diff mbox series

[v1,06/12] target/riscv: Support start kernel directly by KVM

Message ID 20211120074644.729-7-jiangyifei@huawei.com (mailing list archive)
State New, archived
Headers show
Series Add riscv kvm accel support | expand

Commit Message

Yifei Jiang Nov. 20, 2021, 7:46 a.m. UTC
Get kernel and fdt start address in virt.c, and pass them to KVM
when cpu reset. In addition, add kvm_riscv.h to place riscv specific
interface.

Signed-off-by: Yifei Jiang <jiangyifei@huawei.com>
Signed-off-by: Mingwang Li <limingwang@huawei.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
---
 hw/riscv/boot.c          | 11 +++++++++++
 hw/riscv/virt.c          |  7 +++++++
 include/hw/riscv/boot.h  |  1 +
 target/riscv/cpu.c       |  8 ++++++++
 target/riscv/cpu.h       |  3 +++
 target/riscv/kvm-stub.c  | 25 +++++++++++++++++++++++++
 target/riscv/kvm.c       | 14 ++++++++++++++
 target/riscv/kvm_riscv.h | 24 ++++++++++++++++++++++++
 target/riscv/meson.build |  2 +-
 9 files changed, 94 insertions(+), 1 deletion(-)
 create mode 100644 target/riscv/kvm-stub.c
 create mode 100644 target/riscv/kvm_riscv.h

Comments

Anup Patel Dec. 3, 2021, 6:31 a.m. UTC | #1
On Sat, Nov 20, 2021 at 1:17 PM Yifei Jiang <jiangyifei@huawei.com> wrote:
>
> Get kernel and fdt start address in virt.c, and pass them to KVM
> when cpu reset. In addition, add kvm_riscv.h to place riscv specific
> interface.
>
> Signed-off-by: Yifei Jiang <jiangyifei@huawei.com>
> Signed-off-by: Mingwang Li <limingwang@huawei.com>
> Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
> ---
>  hw/riscv/boot.c          | 11 +++++++++++
>  hw/riscv/virt.c          |  7 +++++++
>  include/hw/riscv/boot.h  |  1 +
>  target/riscv/cpu.c       |  8 ++++++++
>  target/riscv/cpu.h       |  3 +++
>  target/riscv/kvm-stub.c  | 25 +++++++++++++++++++++++++
>  target/riscv/kvm.c       | 14 ++++++++++++++
>  target/riscv/kvm_riscv.h | 24 ++++++++++++++++++++++++
>  target/riscv/meson.build |  2 +-
>  9 files changed, 94 insertions(+), 1 deletion(-)
>  create mode 100644 target/riscv/kvm-stub.c
>  create mode 100644 target/riscv/kvm_riscv.h
>
> diff --git a/hw/riscv/boot.c b/hw/riscv/boot.c
> index 519fa455a1..00df6d7810 100644
> --- a/hw/riscv/boot.c
> +++ b/hw/riscv/boot.c
> @@ -317,3 +317,14 @@ void riscv_setup_rom_reset_vec(MachineState *machine, RISCVHartArrayState *harts
>
>      return;
>  }
> +
> +void riscv_setup_direct_kernel(hwaddr kernel_addr, hwaddr fdt_addr)
> +{
> +    CPUState *cs;
> +
> +    for (cs = first_cpu; cs; cs = CPU_NEXT(cs)) {
> +        RISCVCPU *riscv_cpu = RISCV_CPU(cs);
> +        riscv_cpu->env.kernel_addr = kernel_addr;
> +        riscv_cpu->env.fdt_addr = fdt_addr;
> +    }
> +}
> diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c
> index 3af074148e..e3452b25e8 100644
> --- a/hw/riscv/virt.c
> +++ b/hw/riscv/virt.c
> @@ -941,6 +941,13 @@ static void virt_machine_init(MachineState *machine)
>                                virt_memmap[VIRT_MROM].size, kernel_entry,
>                                fdt_load_addr, machine->fdt);
>
> +    /*
> +     * Only direct boot kernel is currently supported for KVM VM,
> +     * So here setup kernel start address and fdt address.
> +     * TODO:Support firmware loading and integrate to TCG start
> +     */
> +    riscv_setup_direct_kernel(kernel_entry, fdt_load_addr);

This should be under "if (kvm_enabled()) {".

Also, update virt machine such that the "-bios" parameter is ignored
and treated like "-bios none" when KVM is enabled.

Further, virt machine should not create an ACLINT (or SiFive CLINT)
instance when KVM is enabled. Event the PLIC should be created
without M-mode PLIC contexts when KVM is enabled.

Regards,
Anup

> +
>      /* SiFive Test MMIO device */
>      sifive_test_create(memmap[VIRT_TEST].base);
>
> diff --git a/include/hw/riscv/boot.h b/include/hw/riscv/boot.h
> index baff11dd8a..5834c234aa 100644
> --- a/include/hw/riscv/boot.h
> +++ b/include/hw/riscv/boot.h
> @@ -58,5 +58,6 @@ void riscv_rom_copy_firmware_info(MachineState *machine, hwaddr rom_base,
>                                    hwaddr rom_size,
>                                    uint32_t reset_vec_size,
>                                    uint64_t kernel_entry);
> +void riscv_setup_direct_kernel(hwaddr kernel_addr, hwaddr fdt_addr);
>
>  #endif /* RISCV_BOOT_H */
> diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
> index f812998123..1c944872a3 100644
> --- a/target/riscv/cpu.c
> +++ b/target/riscv/cpu.c
> @@ -29,6 +29,8 @@
>  #include "hw/qdev-properties.h"
>  #include "migration/vmstate.h"
>  #include "fpu/softfloat-helpers.h"
> +#include "sysemu/kvm.h"
> +#include "kvm_riscv.h"
>
>  /* RISC-V CPU definitions */
>
> @@ -380,6 +382,12 @@ static void riscv_cpu_reset(DeviceState *dev)
>      cs->exception_index = RISCV_EXCP_NONE;
>      env->load_res = -1;
>      set_default_nan_mode(1, &env->fp_status);
> +
> +#ifndef CONFIG_USER_ONLY
> +    if (kvm_enabled()) {
> +        kvm_riscv_reset_vcpu(cpu);
> +    }
> +#endif
>  }
>
>  static void riscv_cpu_disas_set_info(CPUState *s, disassemble_info *info)
> diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h
> index 0760c0af93..2807eb1bcb 100644
> --- a/target/riscv/cpu.h
> +++ b/target/riscv/cpu.h
> @@ -255,6 +255,9 @@ struct CPURISCVState {
>
>      /* Fields from here on are preserved across CPU reset. */
>      QEMUTimer *timer; /* Internal timer */
> +
> +    hwaddr kernel_addr;
> +    hwaddr fdt_addr;
>  };
>
>  OBJECT_DECLARE_TYPE(RISCVCPU, RISCVCPUClass,
> diff --git a/target/riscv/kvm-stub.c b/target/riscv/kvm-stub.c
> new file mode 100644
> index 0000000000..39b96fe3f4
> --- /dev/null
> +++ b/target/riscv/kvm-stub.c
> @@ -0,0 +1,25 @@
> +/*
> + * QEMU KVM RISC-V specific function stubs
> + *
> + * Copyright (c) 2020 Huawei Technologies Co., Ltd
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2 or later, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program.  If not, see <http://www.gnu.org/licenses/>.
> + */
> +#include "qemu/osdep.h"
> +#include "cpu.h"
> +#include "kvm_riscv.h"
> +
> +void kvm_riscv_reset_vcpu(RISCVCPU *cpu)
> +{
> +    abort();
> +}
> diff --git a/target/riscv/kvm.c b/target/riscv/kvm.c
> index 5fe5ca4434..7f3ffcc2b4 100644
> --- a/target/riscv/kvm.c
> +++ b/target/riscv/kvm.c
> @@ -37,6 +37,7 @@
>  #include "hw/irq.h"
>  #include "qemu/log.h"
>  #include "hw/loader.h"
> +#include "kvm_riscv.h"
>
>  static uint64_t kvm_riscv_reg_id(CPURISCVState *env, uint64_t type, uint64_t idx)
>  {
> @@ -444,6 +445,19 @@ int kvm_arch_handle_exit(CPUState *cs, struct kvm_run *run)
>      return 0;
>  }
>
> +void kvm_riscv_reset_vcpu(RISCVCPU *cpu)
> +{
> +    CPURISCVState *env = &cpu->env;
> +
> +    if (!kvm_enabled()) {
> +        return;
> +    }
> +    env->pc = cpu->env.kernel_addr;
> +    env->gpr[10] = kvm_arch_vcpu_id(CPU(cpu)); /* a0 */
> +    env->gpr[11] = cpu->env.fdt_addr;          /* a1 */
> +    env->satp = 0;
> +}
> +
>  bool kvm_arch_cpu_check_are_resettable(void)
>  {
>      return true;
> diff --git a/target/riscv/kvm_riscv.h b/target/riscv/kvm_riscv.h
> new file mode 100644
> index 0000000000..f38c82bf59
> --- /dev/null
> +++ b/target/riscv/kvm_riscv.h
> @@ -0,0 +1,24 @@
> +/*
> + * QEMU KVM support -- RISC-V specific functions.
> + *
> + * Copyright (c) 2020 Huawei Technologies Co., Ltd
> + *
> + * This program is free software; you can redistribute it and/or modify it
> + * under the terms and conditions of the GNU General Public License,
> + * version 2 or later, as published by the Free Software Foundation.
> + *
> + * This program is distributed in the hope it will be useful, but WITHOUT
> + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
> + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
> + * more details.
> + *
> + * You should have received a copy of the GNU General Public License along with
> + * this program.  If not, see <http://www.gnu.org/licenses/>.
> + */
> +
> +#ifndef QEMU_KVM_RISCV_H
> +#define QEMU_KVM_RISCV_H
> +
> +void kvm_riscv_reset_vcpu(RISCVCPU *cpu);
> +
> +#endif
> diff --git a/target/riscv/meson.build b/target/riscv/meson.build
> index 2faf08a941..fe41cc5805 100644
> --- a/target/riscv/meson.build
> +++ b/target/riscv/meson.build
> @@ -19,7 +19,7 @@ riscv_ss.add(files(
>    'bitmanip_helper.c',
>    'translate.c',
>  ))
> -riscv_ss.add(when: 'CONFIG_KVM', if_true: files('kvm.c'))
> +riscv_ss.add(when: 'CONFIG_KVM', if_true: files('kvm.c'), if_false: files('kvm-stub.c'))
>
>  riscv_softmmu_ss = ss.source_set()
>  riscv_softmmu_ss.add(files(
> --
> 2.19.1
>
>
> --
> kvm-riscv mailing list
> kvm-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/kvm-riscv
Yifei Jiang Dec. 10, 2021, 10 a.m. UTC | #2
> -----Original Message-----
> From: kvm-riscv [mailto:kvm-riscv-bounces@lists.infradead.org] On Behalf Of
> Anup Patel
> Sent: Friday, December 3, 2021 2:31 PM
> To: Jiangyifei <jiangyifei@huawei.com>
> Cc: QEMU Developers <qemu-devel@nongnu.org>; open list:RISC-V
> <qemu-riscv@nongnu.org>; kvm-riscv@lists.infradead.org; KVM General
> <kvm@vger.kernel.org>; libvir-list@redhat.com; Anup Patel
> <anup.patel@wdc.com>; Palmer Dabbelt <palmer@dabbelt.com>; Alistair
> Francis <Alistair.Francis@wdc.com>; Bin Meng <bin.meng@windriver.com>;
> Fanliang (EulerOS) <fanliang@huawei.com>; Wubin (H)
> <wu.wubin@huawei.com>; Wanghaibin (D) <wanghaibin.wang@huawei.com>;
> wanbo (G) <wanbo13@huawei.com>; limingwang (A)
> <limingwang@huawei.com>
> Subject: Re: [PATCH v1 06/12] target/riscv: Support start kernel directly by KVM
> 
> On Sat, Nov 20, 2021 at 1:17 PM Yifei Jiang <jiangyifei@huawei.com> wrote:
> >
> > Get kernel and fdt start address in virt.c, and pass them to KVM when
> > cpu reset. In addition, add kvm_riscv.h to place riscv specific
> > interface.
> >
> > Signed-off-by: Yifei Jiang <jiangyifei@huawei.com>
> > Signed-off-by: Mingwang Li <limingwang@huawei.com>
> > Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
> > ---
> >  hw/riscv/boot.c          | 11 +++++++++++
> >  hw/riscv/virt.c          |  7 +++++++
> >  include/hw/riscv/boot.h  |  1 +
> >  target/riscv/cpu.c       |  8 ++++++++
> >  target/riscv/cpu.h       |  3 +++
> >  target/riscv/kvm-stub.c  | 25 +++++++++++++++++++++++++
> >  target/riscv/kvm.c       | 14 ++++++++++++++
> >  target/riscv/kvm_riscv.h | 24 ++++++++++++++++++++++++
> > target/riscv/meson.build |  2 +-
> >  9 files changed, 94 insertions(+), 1 deletion(-)  create mode 100644
> > target/riscv/kvm-stub.c  create mode 100644 target/riscv/kvm_riscv.h
> >
> > diff --git a/hw/riscv/boot.c b/hw/riscv/boot.c index
> > 519fa455a1..00df6d7810 100644
> > --- a/hw/riscv/boot.c
> > +++ b/hw/riscv/boot.c
> > @@ -317,3 +317,14 @@ void riscv_setup_rom_reset_vec(MachineState
> > *machine, RISCVHartArrayState *harts
> >
> >      return;
> >  }
> > +
> > +void riscv_setup_direct_kernel(hwaddr kernel_addr, hwaddr fdt_addr) {
> > +    CPUState *cs;
> > +
> > +    for (cs = first_cpu; cs; cs = CPU_NEXT(cs)) {
> > +        RISCVCPU *riscv_cpu = RISCV_CPU(cs);
> > +        riscv_cpu->env.kernel_addr = kernel_addr;
> > +        riscv_cpu->env.fdt_addr = fdt_addr;
> > +    }
> > +}
> > diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c index
> > 3af074148e..e3452b25e8 100644
> > --- a/hw/riscv/virt.c
> > +++ b/hw/riscv/virt.c
> > @@ -941,6 +941,13 @@ static void virt_machine_init(MachineState
> *machine)
> >                                virt_memmap[VIRT_MROM].size,
> kernel_entry,
> >                                fdt_load_addr, machine->fdt);
> >
> > +    /*
> > +     * Only direct boot kernel is currently supported for KVM VM,
> > +     * So here setup kernel start address and fdt address.
> > +     * TODO:Support firmware loading and integrate to TCG start
> > +     */
> > +    riscv_setup_direct_kernel(kernel_entry, fdt_load_addr);
> 
> This should be under "if (kvm_enabled()) {".
> 
> Also, update virt machine such that the "-bios" parameter is ignored and
> treated like "-bios none" when KVM is enabled.
> 

Thanks, it will be modified in the next series.

> Further, virt machine should not create an ACLINT (or SiFive CLINT) instance
> when KVM is enabled. Event the PLIC should be created without M-mode PLIC
> contexts when KVM is enabled.
> 
> Regards,
> Anup
> 

Yes, you are right. But in order to reuse the PLIC, it is not planned to modify the PLIC at this time.

Yifei

> > +
> >      /* SiFive Test MMIO device */
> >      sifive_test_create(memmap[VIRT_TEST].base);
> >
> > diff --git a/include/hw/riscv/boot.h b/include/hw/riscv/boot.h index
> > baff11dd8a..5834c234aa 100644
> > --- a/include/hw/riscv/boot.h
> > +++ b/include/hw/riscv/boot.h
> > @@ -58,5 +58,6 @@ void riscv_rom_copy_firmware_info(MachineState
> *machine, hwaddr rom_base,
> >                                    hwaddr rom_size,
> >                                    uint32_t reset_vec_size,
> >                                    uint64_t kernel_entry);
> > +void riscv_setup_direct_kernel(hwaddr kernel_addr, hwaddr fdt_addr);
> >
> >  #endif /* RISCV_BOOT_H */
> > diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c index
> > f812998123..1c944872a3 100644
> > --- a/target/riscv/cpu.c
> > +++ b/target/riscv/cpu.c
> > @@ -29,6 +29,8 @@
> >  #include "hw/qdev-properties.h"
> >  #include "migration/vmstate.h"
> >  #include "fpu/softfloat-helpers.h"
> > +#include "sysemu/kvm.h"
> > +#include "kvm_riscv.h"
> >
> >  /* RISC-V CPU definitions */
> >
> > @@ -380,6 +382,12 @@ static void riscv_cpu_reset(DeviceState *dev)
> >      cs->exception_index = RISCV_EXCP_NONE;
> >      env->load_res = -1;
> >      set_default_nan_mode(1, &env->fp_status);
> > +
> > +#ifndef CONFIG_USER_ONLY
> > +    if (kvm_enabled()) {
> > +        kvm_riscv_reset_vcpu(cpu);
> > +    }
> > +#endif
> >  }
> >
> >  static void riscv_cpu_disas_set_info(CPUState *s, disassemble_info
> > *info) diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h index
> > 0760c0af93..2807eb1bcb 100644
> > --- a/target/riscv/cpu.h
> > +++ b/target/riscv/cpu.h
> > @@ -255,6 +255,9 @@ struct CPURISCVState {
> >
> >      /* Fields from here on are preserved across CPU reset. */
> >      QEMUTimer *timer; /* Internal timer */
> > +
> > +    hwaddr kernel_addr;
> > +    hwaddr fdt_addr;
> >  };
> >
> >  OBJECT_DECLARE_TYPE(RISCVCPU, RISCVCPUClass, diff --git
> > a/target/riscv/kvm-stub.c b/target/riscv/kvm-stub.c new file mode
> > 100644 index 0000000000..39b96fe3f4
> > --- /dev/null
> > +++ b/target/riscv/kvm-stub.c
> > @@ -0,0 +1,25 @@
> > +/*
> > + * QEMU KVM RISC-V specific function stubs
> > + *
> > + * Copyright (c) 2020 Huawei Technologies Co., Ltd
> > + *
> > + * This program is free software; you can redistribute it and/or
> > +modify it
> > + * under the terms and conditions of the GNU General Public License,
> > + * version 2 or later, as published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope it will be useful, but
> > +WITHOUT
> > + * ANY WARRANTY; without even the implied warranty of
> MERCHANTABILITY
> > +or
> > + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
> > +License for
> > + * more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > +along with
> > + * this program.  If not, see <http://www.gnu.org/licenses/>.
> > + */
> > +#include "qemu/osdep.h"
> > +#include "cpu.h"
> > +#include "kvm_riscv.h"
> > +
> > +void kvm_riscv_reset_vcpu(RISCVCPU *cpu) {
> > +    abort();
> > +}
> > diff --git a/target/riscv/kvm.c b/target/riscv/kvm.c index
> > 5fe5ca4434..7f3ffcc2b4 100644
> > --- a/target/riscv/kvm.c
> > +++ b/target/riscv/kvm.c
> > @@ -37,6 +37,7 @@
> >  #include "hw/irq.h"
> >  #include "qemu/log.h"
> >  #include "hw/loader.h"
> > +#include "kvm_riscv.h"
> >
> >  static uint64_t kvm_riscv_reg_id(CPURISCVState *env, uint64_t type,
> > uint64_t idx)  { @@ -444,6 +445,19 @@ int
> > kvm_arch_handle_exit(CPUState *cs, struct kvm_run *run)
> >      return 0;
> >  }
> >
> > +void kvm_riscv_reset_vcpu(RISCVCPU *cpu) {
> > +    CPURISCVState *env = &cpu->env;
> > +
> > +    if (!kvm_enabled()) {
> > +        return;
> > +    }
> > +    env->pc = cpu->env.kernel_addr;
> > +    env->gpr[10] = kvm_arch_vcpu_id(CPU(cpu)); /* a0 */
> > +    env->gpr[11] = cpu->env.fdt_addr;          /* a1 */
> > +    env->satp = 0;
> > +}
> > +
> >  bool kvm_arch_cpu_check_are_resettable(void)
> >  {
> >      return true;
> > diff --git a/target/riscv/kvm_riscv.h b/target/riscv/kvm_riscv.h new
> > file mode 100644 index 0000000000..f38c82bf59
> > --- /dev/null
> > +++ b/target/riscv/kvm_riscv.h
> > @@ -0,0 +1,24 @@
> > +/*
> > + * QEMU KVM support -- RISC-V specific functions.
> > + *
> > + * Copyright (c) 2020 Huawei Technologies Co., Ltd
> > + *
> > + * This program is free software; you can redistribute it and/or
> > +modify it
> > + * under the terms and conditions of the GNU General Public License,
> > + * version 2 or later, as published by the Free Software Foundation.
> > + *
> > + * This program is distributed in the hope it will be useful, but
> > +WITHOUT
> > + * ANY WARRANTY; without even the implied warranty of
> MERCHANTABILITY
> > +or
> > + * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public
> > +License for
> > + * more details.
> > + *
> > + * You should have received a copy of the GNU General Public License
> > +along with
> > + * this program.  If not, see <http://www.gnu.org/licenses/>.
> > + */
> > +
> > +#ifndef QEMU_KVM_RISCV_H
> > +#define QEMU_KVM_RISCV_H
> > +
> > +void kvm_riscv_reset_vcpu(RISCVCPU *cpu);
> > +
> > +#endif
> > diff --git a/target/riscv/meson.build b/target/riscv/meson.build index
> > 2faf08a941..fe41cc5805 100644
> > --- a/target/riscv/meson.build
> > +++ b/target/riscv/meson.build
> > @@ -19,7 +19,7 @@ riscv_ss.add(files(
> >    'bitmanip_helper.c',
> >    'translate.c',
> >  ))
> > -riscv_ss.add(when: 'CONFIG_KVM', if_true: files('kvm.c'))
> > +riscv_ss.add(when: 'CONFIG_KVM', if_true: files('kvm.c'), if_false:
> > +files('kvm-stub.c'))
> >
> >  riscv_softmmu_ss = ss.source_set()
> >  riscv_softmmu_ss.add(files(
> > --
> > 2.19.1
> >
> >
> > --
> > kvm-riscv mailing list
> > kvm-riscv@lists.infradead.org
> > http://lists.infradead.org/mailman/listinfo/kvm-riscv
> 
> --
> kvm-riscv mailing list
> kvm-riscv@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/kvm-riscv
diff mbox series

Patch

diff --git a/hw/riscv/boot.c b/hw/riscv/boot.c
index 519fa455a1..00df6d7810 100644
--- a/hw/riscv/boot.c
+++ b/hw/riscv/boot.c
@@ -317,3 +317,14 @@  void riscv_setup_rom_reset_vec(MachineState *machine, RISCVHartArrayState *harts
 
     return;
 }
+
+void riscv_setup_direct_kernel(hwaddr kernel_addr, hwaddr fdt_addr)
+{
+    CPUState *cs;
+
+    for (cs = first_cpu; cs; cs = CPU_NEXT(cs)) {
+        RISCVCPU *riscv_cpu = RISCV_CPU(cs);
+        riscv_cpu->env.kernel_addr = kernel_addr;
+        riscv_cpu->env.fdt_addr = fdt_addr;
+    }
+}
diff --git a/hw/riscv/virt.c b/hw/riscv/virt.c
index 3af074148e..e3452b25e8 100644
--- a/hw/riscv/virt.c
+++ b/hw/riscv/virt.c
@@ -941,6 +941,13 @@  static void virt_machine_init(MachineState *machine)
                               virt_memmap[VIRT_MROM].size, kernel_entry,
                               fdt_load_addr, machine->fdt);
 
+    /*
+     * Only direct boot kernel is currently supported for KVM VM,
+     * So here setup kernel start address and fdt address.
+     * TODO:Support firmware loading and integrate to TCG start
+     */
+    riscv_setup_direct_kernel(kernel_entry, fdt_load_addr);
+
     /* SiFive Test MMIO device */
     sifive_test_create(memmap[VIRT_TEST].base);
 
diff --git a/include/hw/riscv/boot.h b/include/hw/riscv/boot.h
index baff11dd8a..5834c234aa 100644
--- a/include/hw/riscv/boot.h
+++ b/include/hw/riscv/boot.h
@@ -58,5 +58,6 @@  void riscv_rom_copy_firmware_info(MachineState *machine, hwaddr rom_base,
                                   hwaddr rom_size,
                                   uint32_t reset_vec_size,
                                   uint64_t kernel_entry);
+void riscv_setup_direct_kernel(hwaddr kernel_addr, hwaddr fdt_addr);
 
 #endif /* RISCV_BOOT_H */
diff --git a/target/riscv/cpu.c b/target/riscv/cpu.c
index f812998123..1c944872a3 100644
--- a/target/riscv/cpu.c
+++ b/target/riscv/cpu.c
@@ -29,6 +29,8 @@ 
 #include "hw/qdev-properties.h"
 #include "migration/vmstate.h"
 #include "fpu/softfloat-helpers.h"
+#include "sysemu/kvm.h"
+#include "kvm_riscv.h"
 
 /* RISC-V CPU definitions */
 
@@ -380,6 +382,12 @@  static void riscv_cpu_reset(DeviceState *dev)
     cs->exception_index = RISCV_EXCP_NONE;
     env->load_res = -1;
     set_default_nan_mode(1, &env->fp_status);
+
+#ifndef CONFIG_USER_ONLY
+    if (kvm_enabled()) {
+        kvm_riscv_reset_vcpu(cpu);
+    }
+#endif
 }
 
 static void riscv_cpu_disas_set_info(CPUState *s, disassemble_info *info)
diff --git a/target/riscv/cpu.h b/target/riscv/cpu.h
index 0760c0af93..2807eb1bcb 100644
--- a/target/riscv/cpu.h
+++ b/target/riscv/cpu.h
@@ -255,6 +255,9 @@  struct CPURISCVState {
 
     /* Fields from here on are preserved across CPU reset. */
     QEMUTimer *timer; /* Internal timer */
+
+    hwaddr kernel_addr;
+    hwaddr fdt_addr;
 };
 
 OBJECT_DECLARE_TYPE(RISCVCPU, RISCVCPUClass,
diff --git a/target/riscv/kvm-stub.c b/target/riscv/kvm-stub.c
new file mode 100644
index 0000000000..39b96fe3f4
--- /dev/null
+++ b/target/riscv/kvm-stub.c
@@ -0,0 +1,25 @@ 
+/*
+ * QEMU KVM RISC-V specific function stubs
+ *
+ * Copyright (c) 2020 Huawei Technologies Co., Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+#include "qemu/osdep.h"
+#include "cpu.h"
+#include "kvm_riscv.h"
+
+void kvm_riscv_reset_vcpu(RISCVCPU *cpu)
+{
+    abort();
+}
diff --git a/target/riscv/kvm.c b/target/riscv/kvm.c
index 5fe5ca4434..7f3ffcc2b4 100644
--- a/target/riscv/kvm.c
+++ b/target/riscv/kvm.c
@@ -37,6 +37,7 @@ 
 #include "hw/irq.h"
 #include "qemu/log.h"
 #include "hw/loader.h"
+#include "kvm_riscv.h"
 
 static uint64_t kvm_riscv_reg_id(CPURISCVState *env, uint64_t type, uint64_t idx)
 {
@@ -444,6 +445,19 @@  int kvm_arch_handle_exit(CPUState *cs, struct kvm_run *run)
     return 0;
 }
 
+void kvm_riscv_reset_vcpu(RISCVCPU *cpu)
+{
+    CPURISCVState *env = &cpu->env;
+
+    if (!kvm_enabled()) {
+        return;
+    }
+    env->pc = cpu->env.kernel_addr;
+    env->gpr[10] = kvm_arch_vcpu_id(CPU(cpu)); /* a0 */
+    env->gpr[11] = cpu->env.fdt_addr;          /* a1 */
+    env->satp = 0;
+}
+
 bool kvm_arch_cpu_check_are_resettable(void)
 {
     return true;
diff --git a/target/riscv/kvm_riscv.h b/target/riscv/kvm_riscv.h
new file mode 100644
index 0000000000..f38c82bf59
--- /dev/null
+++ b/target/riscv/kvm_riscv.h
@@ -0,0 +1,24 @@ 
+/*
+ * QEMU KVM support -- RISC-V specific functions.
+ *
+ * Copyright (c) 2020 Huawei Technologies Co., Ltd
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2 or later, as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
+ * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
+ * more details.
+ *
+ * You should have received a copy of the GNU General Public License along with
+ * this program.  If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef QEMU_KVM_RISCV_H
+#define QEMU_KVM_RISCV_H
+
+void kvm_riscv_reset_vcpu(RISCVCPU *cpu);
+
+#endif
diff --git a/target/riscv/meson.build b/target/riscv/meson.build
index 2faf08a941..fe41cc5805 100644
--- a/target/riscv/meson.build
+++ b/target/riscv/meson.build
@@ -19,7 +19,7 @@  riscv_ss.add(files(
   'bitmanip_helper.c',
   'translate.c',
 ))
-riscv_ss.add(when: 'CONFIG_KVM', if_true: files('kvm.c'))
+riscv_ss.add(when: 'CONFIG_KVM', if_true: files('kvm.c'), if_false: files('kvm-stub.c'))
 
 riscv_softmmu_ss = ss.source_set()
 riscv_softmmu_ss.add(files(