@@ -1,32 +1,32 @@
.. SPDX-License-Identifier: GPL-2.0
-=========================================
-Power State Coordination Interface (PSCI)
-=========================================
+=======================
+ARM Hypercall Interface
+=======================
-KVM implements the PSCI (Power State Coordination Interface)
-specification in order to provide services such as CPU on/off, reset
-and power-off to the guest.
+KVM handles the hypercall services as requested by the guests. New hypercall
+services are regularly made available by the ARM specification or by KVM (as
+vendor services) if they make sense from a virtualization point of view.
-The PSCI specification is regularly updated to provide new features,
-and KVM implements these updates if they make sense from a virtualization
-point of view.
-
-This means that a guest booted on two different versions of KVM can
-observe two different "firmware" revisions. This could cause issues if
-a given guest is tied to a particular PSCI revision (unlikely), or if
-a migration causes a different PSCI version to be exposed out of the
-blue to an unsuspecting guest.
+This means that a guest booted on two different versions of KVM can observe
+two different "firmware" revisions. This could cause issues if a given guest
+is tied to a particular version of a hypercall service, or if a migration
+causes a different version to be exposed out of the blue to an unsuspecting
+guest.
In order to remedy this situation, KVM exposes a set of "firmware
pseudo-registers" that can be manipulated using the GET/SET_ONE_REG
interface. These registers can be saved/restored by userspace, and set
to a convenient value if required.
-The following register is defined:
+The following registers are defined:
* KVM_REG_ARM_PSCI_VERSION:
+ KVM implements the PSCI (Power State Coordination Interface)
+ specification in order to provide services such as CPU on/off, reset
+ and power-off to the guest.
+
- Only valid if the vcpu has the KVM_ARM_VCPU_PSCI_0_2 feature set
(and thus has already been initialized)
- Returns the current PSCI version on GET_ONE_REG (defaulting to the
@@ -74,4 +74,55 @@ The following register is defined:
KVM_REG_ARM_SMCCC_ARCH_WORKAROUND_2_NOT_REQUIRED:
The workaround is always active on this vCPU or it is not needed.
-.. [1] https://developer.arm.com/-/media/developer/pdf/ARM_DEN_0070A_Firmware_interfaces_for_mitigating_CVE-2017-5715.pdf
+Contrary to the above registers, the following registers exposes the hypercall
+services in the form of a feature-bitmap. This bitmap is translated to the
+services that are exposed to the guest. There is a register defined per service
+call owner and can be accessed via GET/SET_ONE_REG interface.
+
+A new KVM capability, KVM_CAP_ARM_HVC_FW_REG_BMAP, is introduced to let
+user-space know of this extension. A simple 'read' of the capability would
+return the number of bitmapped registers. The user-space is expected to
+make a not of this value and configure each of the register.
+
+By default, these registers are set with the upper limit of the features that
+are supported. User-space can discover this configuration via GET_ONE_REG. If
+unsatisfied, the user-space can write back the desired bitmap back via
+SET_ONE_REG.
+
+The psuedo-firmware bitmap register are as follows:
+
+* KVM_REG_ARM_STD_BMAP:
+ Controls the bitmap of the ARM Standard Secure Service Calls.
+
+ The following bits are accepted:
+
+ KVM_REG_ARM_STD_BIT_TRNG_V1_0:
+ The bit represents the services offered under v1.0 of ARM True Random
+ Number Generator (TRNG) specification, ARM DEN0098.
+
+* KVM_REG_ARM_STD_HYP_BMAP:
+ Controls the bitmap of the ARM Standard Hypervisor Service Calls.
+
+ The following bits are accepted:
+
+ KVM_REG_ARM_STD_HYP_BIT_PV_TIME:
+ The bit represents the Paravirtualized Time service as represented by
+ ARM DEN0057A.
+
+* KVM_REG_ARM_VENDOR_HYP_BMAP:
+ Controls the bitmap of the Vendor specific Hypervisor Service Calls.
+
+ The following bits are accepted:
+
+ KVM_REG_ARM_VENDOR_HYP_BIT_PTP:
+ The bit represents the Precision Time Protocol KVM service.
+
+Errors:
+
+ ======= =============================================================
+ -ENOENT Unknown register accessed.
+ -EBUSY Attempt a 'write' to the register after the VM has started.
+ -EINVAL Invalid bitmap written to the register.
+ ======= =============================================================
+
+.. [1] https://developer.arm.com/-/media/developer/pdf/ARM_DEN_0070A_Firmware_interfaces_for_mitigating_CVE-2017-5715.pdf
\ No newline at end of file
Add the documentation for the bitmap firmware registers in psci.rst. This includes the details for KVM_REG_ARM_STD_BMAP, KVM_REG_ARM_STD_HYP_BMAP, and KVM_REG_ARM_VENDOR_HYP_BMAP registers. Signed-off-by: Raghavendra Rao Ananta <rananta@google.com> --- Documentation/virt/kvm/arm/psci.rst | 85 +++++++++++++++++++++++------ 1 file changed, 68 insertions(+), 17 deletions(-)