@@ -10,12 +10,13 @@
#define SETUP_EFI 4
#define SETUP_APPLE_PROPERTIES 5
#define SETUP_JAILHOUSE 6
+#define SETUP_CC_BLOB 7
+#define SETUP_IMA 8
#define SETUP_RNG_SEED 9
+#define SETUP_ENUM_MAX SETUP_RNG_SEED
#define SETUP_INDIRECT (1<<31)
-
-/* SETUP_INDIRECT | max(SETUP_*) */
-#define SETUP_TYPE_MAX (SETUP_INDIRECT | SETUP_JAILHOUSE)
+#define SETUP_TYPE_MAX (SETUP_ENUM_MAX | SETUP_INDIRECT)
/* ram_size flags */
#define RAMDISK_IMAGE_START_MASK 0x07FF
@@ -571,6 +571,53 @@ extern "C" {
*/
#define I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC fourcc_mod_code(INTEL, 8)
+/*
+ * Intel Tile 4 layout
+ *
+ * This is a tiled layout using 4KB tiles in a row-major layout. It has the same
+ * shape as Tile Y at two granularities: 4KB (128B x 32) and 64B (16B x 4). It
+ * only differs from Tile Y at the 256B granularity in between. At this
+ * granularity, Tile Y has a shape of 16B x 32 rows, but this tiling has a shape
+ * of 64B x 8 rows.
+ */
+#define I915_FORMAT_MOD_4_TILED fourcc_mod_code(INTEL, 9)
+
+/*
+ * Intel color control surfaces (CCS) for DG2 render compression.
+ *
+ * The main surface is Tile 4 and at plane index 0. The CCS data is stored
+ * outside of the GEM object in a reserved memory area dedicated for the
+ * storage of the CCS data for all RC/RC_CC/MC compressible GEM objects. The
+ * main surface pitch is required to be a multiple of four Tile 4 widths.
+ */
+#define I915_FORMAT_MOD_4_TILED_DG2_RC_CCS fourcc_mod_code(INTEL, 10)
+
+/*
+ * Intel color control surfaces (CCS) for DG2 media compression.
+ *
+ * The main surface is Tile 4 and at plane index 0. For semi-planar formats
+ * like NV12, the Y and UV planes are Tile 4 and are located at plane indices
+ * 0 and 1, respectively. The CCS for all planes are stored outside of the
+ * GEM object in a reserved memory area dedicated for the storage of the
+ * CCS data for all RC/RC_CC/MC compressible GEM objects. The main surface
+ * pitch is required to be a multiple of four Tile 4 widths.
+ */
+#define I915_FORMAT_MOD_4_TILED_DG2_MC_CCS fourcc_mod_code(INTEL, 11)
+
+/*
+ * Intel Color Control Surface with Clear Color (CCS) for DG2 render compression.
+ *
+ * The main surface is Tile 4 and at plane index 0. The CCS data is stored
+ * outside of the GEM object in a reserved memory area dedicated for the
+ * storage of the CCS data for all RC/RC_CC/MC compressible GEM objects. The
+ * main surface pitch is required to be a multiple of four Tile 4 widths. The
+ * clear color is stored at plane index 1 and the pitch should be ignored. The
+ * format of the 256 bits of clear color data matches the one used for the
+ * I915_FORMAT_MOD_Y_TILED_GEN12_RC_CCS_CC modifier, see its description
+ * for details.
+ */
+#define I915_FORMAT_MOD_4_TILED_DG2_RC_CCS_CC fourcc_mod_code(INTEL, 12)
+
/*
* Tiled, NV12MT, grouped in 64 (pixels) x 32 (lines) -sized macroblocks
*
@@ -608,6 +655,28 @@ extern "C" {
*/
#define DRM_FORMAT_MOD_QCOM_COMPRESSED fourcc_mod_code(QCOM, 1)
+/*
+ * Qualcomm Tiled Format
+ *
+ * Similar to DRM_FORMAT_MOD_QCOM_COMPRESSED but not compressed.
+ * Implementation may be platform and base-format specific.
+ *
+ * Each macrotile consists of m x n (mostly 4 x 4) tiles.
+ * Pixel data pitch/stride is aligned with macrotile width.
+ * Pixel data height is aligned with macrotile height.
+ * Entire pixel data buffer is aligned with 4k(bytes).
+ */
+#define DRM_FORMAT_MOD_QCOM_TILED3 fourcc_mod_code(QCOM, 3)
+
+/*
+ * Qualcomm Alternate Tiled Format
+ *
+ * Alternate tiled format typically only used within GMEM.
+ * Implementation may be platform and base-format specific.
+ */
+#define DRM_FORMAT_MOD_QCOM_TILED2 fourcc_mod_code(QCOM, 2)
+
+
/* Vivante framebuffer modifiers */
/*
@@ -1691,6 +1691,7 @@ enum ethtool_link_mode_bit_indices {
ETHTOOL_LINK_MODE_400000baseCR4_Full_BIT = 89,
ETHTOOL_LINK_MODE_100baseFX_Half_BIT = 90,
ETHTOOL_LINK_MODE_100baseFX_Full_BIT = 91,
+ ETHTOOL_LINK_MODE_10baseT1L_Full_BIT = 92,
/* must be last entry */
__ETHTOOL_LINK_MODE_MASK_NBITS
};
@@ -75,10 +75,13 @@ struct input_id {
* Note that input core does not clamp reported values to the
* [minimum, maximum] limits, such task is left to userspace.
*
- * The default resolution for main axes (ABS_X, ABS_Y, ABS_Z)
- * is reported in units per millimeter (units/mm), resolution
- * for rotational axes (ABS_RX, ABS_RY, ABS_RZ) is reported
- * in units per radian.
+ * The default resolution for main axes (ABS_X, ABS_Y, ABS_Z,
+ * ABS_MT_POSITION_X, ABS_MT_POSITION_Y) is reported in units
+ * per millimeter (units/mm), resolution for rotational axes
+ * (ABS_RX, ABS_RY, ABS_RZ) is reported in units per radian.
+ * The resolution for the size axes (ABS_MT_TOUCH_MAJOR,
+ * ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MAJOR, ABS_MT_WIDTH_MINOR)
+ * is reported in units per millimeter (units/mm).
* When INPUT_PROP_ACCELEROMETER is set the resolution changes.
* The main axes (ABS_X, ABS_Y, ABS_Z) are then reported in
* units per g (units/g) and in units per degree per second
@@ -268,6 +271,7 @@ struct input_mask {
#define BUS_RMI 0x1D
#define BUS_CEC 0x1E
#define BUS_INTEL_ISHTP 0x1F
+#define BUS_AMD_SFH 0x20
/*
* MT_TOOL types
@@ -616,6 +616,7 @@
#define PCI_EXP_SLTCTL_PWR_OFF 0x0400 /* Power Off */
#define PCI_EXP_SLTCTL_EIC 0x0800 /* Electromechanical Interlock Control */
#define PCI_EXP_SLTCTL_DLLSCE 0x1000 /* Data Link Layer State Changed Enable */
+#define PCI_EXP_SLTCTL_ASPL_DISABLE 0x2000 /* Auto Slot Power Limit Disable */
#define PCI_EXP_SLTCTL_IBPD_DISABLE 0x4000 /* In-band PD disable */
#define PCI_EXP_SLTSTA 0x1a /* Slot Status */
#define PCI_EXP_SLTSTA_ABP 0x0001 /* Attention Button Pressed */
@@ -87,7 +87,7 @@ struct vhost_msg {
struct vhost_msg_v2 {
uint32_t type;
- uint32_t reserved;
+ uint32_t asid;
union {
struct vhost_iotlb_msg iotlb;
uint8_t padding[64];
@@ -153,4 +153,13 @@ struct vhost_vdpa_iova_range {
/* vhost-net should add virtio_net_hdr for RX, and strip for TX packets. */
#define VHOST_NET_F_VIRTIO_NET_HDR 27
+/* Use message type V2 */
+#define VHOST_BACKEND_F_IOTLB_MSG_V2 0x1
+/* IOTLB can accept batching hints */
+#define VHOST_BACKEND_F_IOTLB_BATCH 0x2
+/* IOTLB can accept address space identifier through V2 type of IOTLB
+ * message
+ */
+#define VHOST_BACKEND_F_IOTLB_ASID 0x3
+
#endif
@@ -73,12 +73,12 @@
* Virtio Transitional IDs
*/
-#define VIRTIO_TRANS_ID_NET 1000 /* transitional virtio net */
-#define VIRTIO_TRANS_ID_BLOCK 1001 /* transitional virtio block */
-#define VIRTIO_TRANS_ID_BALLOON 1002 /* transitional virtio balloon */
-#define VIRTIO_TRANS_ID_CONSOLE 1003 /* transitional virtio console */
-#define VIRTIO_TRANS_ID_SCSI 1004 /* transitional virtio SCSI */
-#define VIRTIO_TRANS_ID_RNG 1005 /* transitional virtio rng */
-#define VIRTIO_TRANS_ID_9P 1009 /* transitional virtio 9p console */
+#define VIRTIO_TRANS_ID_NET 0x1000 /* transitional virtio net */
+#define VIRTIO_TRANS_ID_BLOCK 0x1001 /* transitional virtio block */
+#define VIRTIO_TRANS_ID_BALLOON 0x1002 /* transitional virtio balloon */
+#define VIRTIO_TRANS_ID_CONSOLE 0x1003 /* transitional virtio console */
+#define VIRTIO_TRANS_ID_SCSI 0x1004 /* transitional virtio SCSI */
+#define VIRTIO_TRANS_ID_RNG 0x1005 /* transitional virtio rng */
+#define VIRTIO_TRANS_ID_9P 0x1009 /* transitional virtio 9p console */
#endif /* _LINUX_VIRTIO_IDS_H */
@@ -139,8 +139,10 @@ struct kvm_guest_debug_arch {
__u64 dbg_wvr[KVM_ARM_MAX_DBG_REGS];
};
+#define KVM_DEBUG_ARCH_HSR_HIGH_VALID (1 << 0)
struct kvm_debug_exit_arch {
__u32 hsr;
+ __u32 hsr_high; /* ESR_EL2[61:32] */
__u64 far; /* used for watchpoints */
};
@@ -332,6 +334,31 @@ struct kvm_arm_copy_mte_tags {
#define KVM_ARM64_SVE_VLS_WORDS \
((KVM_ARM64_SVE_VQ_MAX - KVM_ARM64_SVE_VQ_MIN) / 64 + 1)
+/* Bitmap feature firmware registers */
+#define KVM_REG_ARM_FW_FEAT_BMAP (0x0016 << KVM_REG_ARM_COPROC_SHIFT)
+#define KVM_REG_ARM_FW_FEAT_BMAP_REG(r) (KVM_REG_ARM64 | KVM_REG_SIZE_U64 | \
+ KVM_REG_ARM_FW_FEAT_BMAP | \
+ ((r) & 0xffff))
+
+#define KVM_REG_ARM_STD_BMAP KVM_REG_ARM_FW_FEAT_BMAP_REG(0)
+
+enum {
+ KVM_REG_ARM_STD_BIT_TRNG_V1_0 = 0,
+};
+
+#define KVM_REG_ARM_STD_HYP_BMAP KVM_REG_ARM_FW_FEAT_BMAP_REG(1)
+
+enum {
+ KVM_REG_ARM_STD_HYP_BIT_PV_TIME = 0,
+};
+
+#define KVM_REG_ARM_VENDOR_HYP_BMAP KVM_REG_ARM_FW_FEAT_BMAP_REG(2)
+
+enum {
+ KVM_REG_ARM_VENDOR_HYP_BIT_FUNC_FEAT = 0,
+ KVM_REG_ARM_VENDOR_HYP_BIT_PTP = 1,
+};
+
/* Device Control API: ARM VGIC */
#define KVM_DEV_ARM_VGIC_GRP_ADDR 0
#define KVM_DEV_ARM_VGIC_GRP_DIST_REGS 1
@@ -383,7 +383,7 @@ __SYSCALL(__NR_syslog, sys_syslog)
/* kernel/ptrace.c */
#define __NR_ptrace 117
-__SYSCALL(__NR_ptrace, sys_ptrace)
+__SC_COMP(__NR_ptrace, sys_ptrace, compat_sys_ptrace)
/* kernel/sched/core.c */
#define __NR_sched_setparam 118
@@ -779,7 +779,7 @@ __SYSCALL(__NR_rseq, sys_rseq)
#define __NR_kexec_file_load 294
__SYSCALL(__NR_kexec_file_load, sys_kexec_file_load)
/* 295 through 402 are unassigned to sync up with generic numbers, don't use */
-#if __BITS_PER_LONG == 32
+#if defined(__SYSCALL_COMPAT) || __BITS_PER_LONG == 32
#define __NR_clock_gettime64 403
__SYSCALL(__NR_clock_gettime64, sys_clock_gettime)
#define __NR_clock_settime64 404
@@ -82,6 +82,23 @@ struct kvm_riscv_timer {
__u64 state;
};
+/*
+ * ISA extension IDs specific to KVM. This is not the same as the host ISA
+ * extension IDs as that is internal to the host and should not be exposed
+ * to the guest. This should always be contiguous to keep the mapping simple
+ * in KVM implementation.
+ */
+enum KVM_RISCV_ISA_EXT_ID {
+ KVM_RISCV_ISA_EXT_A = 0,
+ KVM_RISCV_ISA_EXT_C,
+ KVM_RISCV_ISA_EXT_D,
+ KVM_RISCV_ISA_EXT_F,
+ KVM_RISCV_ISA_EXT_H,
+ KVM_RISCV_ISA_EXT_I,
+ KVM_RISCV_ISA_EXT_M,
+ KVM_RISCV_ISA_EXT_MAX,
+};
+
/* Possible states for kvm_riscv_timer */
#define KVM_RISCV_TIMER_STATE_OFF 0
#define KVM_RISCV_TIMER_STATE_ON 1
@@ -123,6 +140,9 @@ struct kvm_riscv_timer {
#define KVM_REG_RISCV_FP_D_REG(name) \
(offsetof(struct __riscv_d_ext_state, name) / sizeof(__u64))
+/* ISA Extension registers are mapped as type 7 */
+#define KVM_REG_RISCV_ISA_EXT (0x07 << KVM_REG_RISCV_TYPE_SHIFT)
+
#endif
#endif /* __LINUX_KVM_RISCV_H */
@@ -15,12 +15,13 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*/
-#ifdef __LP64__
+#if defined(__LP64__) && !defined(__SYSCALL_COMPAT)
#define __ARCH_WANT_NEW_STAT
#define __ARCH_WANT_SET_GET_RLIMIT
#endif /* __LP64__ */
#define __ARCH_WANT_SYS_CLONE3
+#define __ARCH_WANT_MEMFD_SECRET
#include <asm-generic/unistd.h>
@@ -428,11 +428,12 @@ struct kvm_sync_regs {
struct kvm_vcpu_events events;
};
-#define KVM_X86_QUIRK_LINT0_REENABLED (1 << 0)
-#define KVM_X86_QUIRK_CD_NW_CLEARED (1 << 1)
-#define KVM_X86_QUIRK_LAPIC_MMIO_HOLE (1 << 2)
-#define KVM_X86_QUIRK_OUT_7E_INC_RIP (1 << 3)
-#define KVM_X86_QUIRK_MISC_ENABLE_NO_MWAIT (1 << 4)
+#define KVM_X86_QUIRK_LINT0_REENABLED (1 << 0)
+#define KVM_X86_QUIRK_CD_NW_CLEARED (1 << 1)
+#define KVM_X86_QUIRK_LAPIC_MMIO_HOLE (1 << 2)
+#define KVM_X86_QUIRK_OUT_7E_INC_RIP (1 << 3)
+#define KVM_X86_QUIRK_MISC_ENABLE_NO_MWAIT (1 << 4)
+#define KVM_X86_QUIRK_FIX_HYPERCALL_INSN (1 << 5)
#define KVM_STATE_NESTED_FORMAT_VMX 0
#define KVM_STATE_NESTED_FORMAT_SVM 1
@@ -5,20 +5,6 @@
#define MAP_32BIT 0x40 /* only give out 32bit addresses */
#ifdef CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS
-/*
- * Take the 4 protection key bits out of the vma->vm_flags
- * value and turn them in to the bits that we can put in
- * to a pte.
- *
- * Only override these if Protection Keys are available
- * (which is only on 64-bit).
- */
-#define arch_vm_get_page_prot(vm_flags) __pgprot( \
- ((vm_flags) & VM_PKEY_BIT0 ? _PAGE_PKEY_BIT0 : 0) | \
- ((vm_flags) & VM_PKEY_BIT1 ? _PAGE_PKEY_BIT1 : 0) | \
- ((vm_flags) & VM_PKEY_BIT2 ? _PAGE_PKEY_BIT2 : 0) | \
- ((vm_flags) & VM_PKEY_BIT3 ? _PAGE_PKEY_BIT3 : 0))
-
#define arch_calc_vm_prot_bits(prot, key) ( \
((key) & 0x1 ? VM_PKEY_BIT0 : 0) | \
((key) & 0x2 ? VM_PKEY_BIT1 : 0) | \
@@ -444,6 +444,9 @@ struct kvm_run {
#define KVM_SYSTEM_EVENT_SHUTDOWN 1
#define KVM_SYSTEM_EVENT_RESET 2
#define KVM_SYSTEM_EVENT_CRASH 3
+#define KVM_SYSTEM_EVENT_WAKEUP 4
+#define KVM_SYSTEM_EVENT_SUSPEND 5
+#define KVM_SYSTEM_EVENT_SEV_TERM 6
__u32 type;
__u32 ndata;
union {
@@ -644,6 +647,7 @@ struct kvm_vapic_addr {
#define KVM_MP_STATE_OPERATING 7
#define KVM_MP_STATE_LOAD 8
#define KVM_MP_STATE_AP_RESET_HOLD 9
+#define KVM_MP_STATE_SUSPENDED 10
struct kvm_mp_state {
__u32 mp_state;
@@ -1148,8 +1152,9 @@ struct kvm_ppc_resize_hpt {
#define KVM_CAP_S390_MEM_OP_EXTENSION 211
#define KVM_CAP_PMU_CAPABILITY 212
#define KVM_CAP_DISABLE_QUIRKS2 213
-/* #define KVM_CAP_VM_TSC_CONTROL 214 */
+#define KVM_CAP_VM_TSC_CONTROL 214
#define KVM_CAP_SYSTEM_EVENT_DATA 215
+#define KVM_CAP_ARM_SYSTEM_SUSPEND 216
#ifdef KVM_CAP_IRQ_ROUTING
@@ -1238,6 +1243,7 @@ struct kvm_x86_mce {
#define KVM_XEN_HVM_CONFIG_SHARED_INFO (1 << 2)
#define KVM_XEN_HVM_CONFIG_RUNSTATE (1 << 3)
#define KVM_XEN_HVM_CONFIG_EVTCHN_2LEVEL (1 << 4)
+#define KVM_XEN_HVM_CONFIG_EVTCHN_SEND (1 << 5)
struct kvm_xen_hvm_config {
__u32 flags;
@@ -1476,7 +1482,8 @@ struct kvm_s390_ucas_mapping {
#define KVM_SET_PIT2 _IOW(KVMIO, 0xa0, struct kvm_pit_state2)
/* Available with KVM_CAP_PPC_GET_PVINFO */
#define KVM_PPC_GET_PVINFO _IOW(KVMIO, 0xa1, struct kvm_ppc_pvinfo)
-/* Available with KVM_CAP_TSC_CONTROL */
+/* Available with KVM_CAP_TSC_CONTROL for a vCPU, or with
+* KVM_CAP_VM_TSC_CONTROL to set defaults for a VM */
#define KVM_SET_TSC_KHZ _IO(KVMIO, 0xa2)
#define KVM_GET_TSC_KHZ _IO(KVMIO, 0xa3)
/* Available with KVM_CAP_PCI_2_3 */
@@ -1692,6 +1699,32 @@ struct kvm_xen_hvm_attr {
struct {
__u64 gfn;
} shared_info;
+ struct {
+ __u32 send_port;
+ __u32 type; /* EVTCHNSTAT_ipi / EVTCHNSTAT_interdomain */
+ __u32 flags;
+#define KVM_XEN_EVTCHN_DEASSIGN (1 << 0)
+#define KVM_XEN_EVTCHN_UPDATE (1 << 1)
+#define KVM_XEN_EVTCHN_RESET (1 << 2)
+ /*
+ * Events sent by the guest are either looped back to
+ * the guest itself (potentially on a different port#)
+ * or signalled via an eventfd.
+ */
+ union {
+ struct {
+ __u32 port;
+ __u32 vcpu;
+ __u32 priority;
+ } port;
+ struct {
+ __u32 port; /* Zero for eventfd */
+ __s32 fd;
+ } eventfd;
+ __u32 padding[4];
+ } deliver;
+ } evtchn;
+ __u32 xen_version;
__u64 pad[8];
} u;
};
@@ -1700,11 +1733,17 @@ struct kvm_xen_hvm_attr {
#define KVM_XEN_ATTR_TYPE_LONG_MODE 0x0
#define KVM_XEN_ATTR_TYPE_SHARED_INFO 0x1
#define KVM_XEN_ATTR_TYPE_UPCALL_VECTOR 0x2
+/* Available with KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_EVTCHN_SEND */
+#define KVM_XEN_ATTR_TYPE_EVTCHN 0x3
+#define KVM_XEN_ATTR_TYPE_XEN_VERSION 0x4
/* Per-vCPU Xen attributes */
#define KVM_XEN_VCPU_GET_ATTR _IOWR(KVMIO, 0xca, struct kvm_xen_vcpu_attr)
#define KVM_XEN_VCPU_SET_ATTR _IOW(KVMIO, 0xcb, struct kvm_xen_vcpu_attr)
+/* Available with KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_EVTCHN_SEND */
+#define KVM_XEN_HVM_EVTCHN_SEND _IOW(KVMIO, 0xd0, struct kvm_irq_routing_xen_evtchn)
+
#define KVM_GET_SREGS2 _IOR(KVMIO, 0xcc, struct kvm_sregs2)
#define KVM_SET_SREGS2 _IOW(KVMIO, 0xcd, struct kvm_sregs2)
@@ -1722,6 +1761,13 @@ struct kvm_xen_vcpu_attr {
__u64 time_blocked;
__u64 time_offline;
} runstate;
+ __u32 vcpu_id;
+ struct {
+ __u32 port;
+ __u32 priority;
+ __u64 expires_ns;
+ } timer;
+ __u8 vector;
} u;
};
@@ -1732,6 +1778,10 @@ struct kvm_xen_vcpu_attr {
#define KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_CURRENT 0x3
#define KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_DATA 0x4
#define KVM_XEN_VCPU_ATTR_TYPE_RUNSTATE_ADJUST 0x5
+/* Available with KVM_CAP_XEN_HVM / KVM_XEN_HVM_CONFIG_EVTCHN_SEND */
+#define KVM_XEN_VCPU_ATTR_TYPE_VCPU_ID 0x6
+#define KVM_XEN_VCPU_ATTR_TYPE_TIMER 0x7
+#define KVM_XEN_VCPU_ATTR_TYPE_UPCALL_VECTOR 0x8
/* Secure Encrypted Virtualization command */
enum sev_cmd_id {
@@ -2032,7 +2082,7 @@ struct kvm_stats_header {
#define KVM_STATS_UNIT_SECONDS (0x2 << KVM_STATS_UNIT_SHIFT)
#define KVM_STATS_UNIT_CYCLES (0x3 << KVM_STATS_UNIT_SHIFT)
#define KVM_STATS_UNIT_BOOLEAN (0x4 << KVM_STATS_UNIT_SHIFT)
-#define KVM_STATS_UNIT_MAX KVM_STATS_UNIT_CYCLES
+#define KVM_STATS_UNIT_MAX KVM_STATS_UNIT_BOOLEAN
#define KVM_STATS_BASE_SHIFT 8
#define KVM_STATS_BASE_MASK (0xF << KVM_STATS_BASE_SHIFT)
@@ -33,7 +33,8 @@
UFFD_FEATURE_THREAD_ID | \
UFFD_FEATURE_MINOR_HUGETLBFS | \
UFFD_FEATURE_MINOR_SHMEM | \
- UFFD_FEATURE_EXACT_ADDRESS)
+ UFFD_FEATURE_EXACT_ADDRESS | \
+ UFFD_FEATURE_WP_HUGETLBFS_SHMEM)
#define UFFD_API_IOCTLS \
((__u64)1 << _UFFDIO_REGISTER | \
(__u64)1 << _UFFDIO_UNREGISTER | \
@@ -47,7 +48,8 @@
#define UFFD_API_RANGE_IOCTLS_BASIC \
((__u64)1 << _UFFDIO_WAKE | \
(__u64)1 << _UFFDIO_COPY | \
- (__u64)1 << _UFFDIO_CONTINUE)
+ (__u64)1 << _UFFDIO_CONTINUE | \
+ (__u64)1 << _UFFDIO_WRITEPROTECT)
/*
* Valid ioctl command number range with this API is from 0x00 to
@@ -194,6 +196,9 @@ struct uffdio_api {
* UFFD_FEATURE_EXACT_ADDRESS indicates that the exact address of page
* faults would be provided and the offset within the page would not be
* masked.
+ *
+ * UFFD_FEATURE_WP_HUGETLBFS_SHMEM indicates that userfaultfd
+ * write-protection mode is supported on both shmem and hugetlbfs.
*/
#define UFFD_FEATURE_PAGEFAULT_FLAG_WP (1<<0)
#define UFFD_FEATURE_EVENT_FORK (1<<1)
@@ -207,6 +212,7 @@ struct uffdio_api {
#define UFFD_FEATURE_MINOR_HUGETLBFS (1<<9)
#define UFFD_FEATURE_MINOR_SHMEM (1<<10)
#define UFFD_FEATURE_EXACT_ADDRESS (1<<11)
+#define UFFD_FEATURE_WP_HUGETLBFS_SHMEM (1<<12)
__u64 features;
__u64 ioctls;
@@ -643,7 +643,7 @@ enum {
};
/**
- * VFIO_DEVICE_GET_PCI_HOT_RESET_INFO - _IORW(VFIO_TYPE, VFIO_BASE + 12,
+ * VFIO_DEVICE_GET_PCI_HOT_RESET_INFO - _IOWR(VFIO_TYPE, VFIO_BASE + 12,
* struct vfio_pci_hot_reset_info)
*
* Return: 0 on success, -errno on failure:
@@ -770,7 +770,7 @@ struct vfio_device_ioeventfd {
#define VFIO_DEVICE_IOEVENTFD _IO(VFIO_TYPE, VFIO_BASE + 16)
/**
- * VFIO_DEVICE_FEATURE - _IORW(VFIO_TYPE, VFIO_BASE + 17,
+ * VFIO_DEVICE_FEATURE - _IOWR(VFIO_TYPE, VFIO_BASE + 17,
* struct vfio_device_feature)
*
* Get, set, or probe feature data of the device. The feature is selected
@@ -89,11 +89,6 @@
/* Set or get vhost backend capability */
-/* Use message type V2 */
-#define VHOST_BACKEND_F_IOTLB_MSG_V2 0x1
-/* IOTLB can accept batching hints */
-#define VHOST_BACKEND_F_IOTLB_BATCH 0x2
-
#define VHOST_SET_BACKEND_FEATURES _IOW(VHOST_VIRTIO, 0x25, __u64)
#define VHOST_GET_BACKEND_FEATURES _IOR(VHOST_VIRTIO, 0x26, __u64)
@@ -150,11 +145,30 @@
/* Get the valid iova range */
#define VHOST_VDPA_GET_IOVA_RANGE _IOR(VHOST_VIRTIO, 0x78, \
struct vhost_vdpa_iova_range)
-
/* Get the config size */
#define VHOST_VDPA_GET_CONFIG_SIZE _IOR(VHOST_VIRTIO, 0x79, __u32)
/* Get the count of all virtqueues */
#define VHOST_VDPA_GET_VQS_COUNT _IOR(VHOST_VIRTIO, 0x80, __u32)
+/* Get the number of virtqueue groups. */
+#define VHOST_VDPA_GET_GROUP_NUM _IOR(VHOST_VIRTIO, 0x81, __u32)
+
+/* Get the number of address spaces. */
+#define VHOST_VDPA_GET_AS_NUM _IOR(VHOST_VIRTIO, 0x7A, unsigned int)
+
+/* Get the group for a virtqueue: read index, write group in num,
+ * The virtqueue index is stored in the index field of
+ * vhost_vring_state. The group for this specific virtqueue is
+ * returned via num field of vhost_vring_state.
+ */
+#define VHOST_VDPA_GET_VRING_GROUP _IOWR(VHOST_VIRTIO, 0x7B, \
+ struct vhost_vring_state)
+/* Set the ASID for a virtqueue group. The group index is stored in
+ * the index field of vhost_vring_state, the ASID associated with this
+ * group is stored at num field of vhost_vring_state.
+ */
+#define VHOST_VDPA_SET_GROUP_ASID _IOW(VHOST_VIRTIO, 0x7C, \
+ struct vhost_vring_state)
+
#endif
Main reason is for new vhost_vdpa address space ioctls to be available. Update kernel headers until 9de1f9c8ca51 ("Merge tag 'irq-core-2022-08-01' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip"). Signed-off-by: Eugenio Pérez <eperezma@redhat.com> --- include/standard-headers/asm-x86/bootparam.h | 7 +- include/standard-headers/drm/drm_fourcc.h | 69 ++++++++++++++++++++ include/standard-headers/linux/ethtool.h | 1 + include/standard-headers/linux/input.h | 12 ++-- include/standard-headers/linux/pci_regs.h | 1 + include/standard-headers/linux/vhost_types.h | 11 +++- include/standard-headers/linux/virtio_ids.h | 14 ++-- linux-headers/asm-arm64/kvm.h | 27 ++++++++ linux-headers/asm-generic/unistd.h | 4 +- linux-headers/asm-riscv/kvm.h | 20 ++++++ linux-headers/asm-riscv/unistd.h | 3 +- linux-headers/asm-x86/kvm.h | 11 ++-- linux-headers/asm-x86/mman.h | 14 ---- linux-headers/linux/kvm.h | 56 +++++++++++++++- linux-headers/linux/userfaultfd.h | 10 ++- linux-headers/linux/vfio.h | 4 +- linux-headers/linux/vhost.h | 26 ++++++-- 17 files changed, 240 insertions(+), 50 deletions(-)