diff mbox series

[RFC,v3,2/2] KVM: x86/mmu: replace BUG() with KVM_BUG() in shadow mmu

Message ID 20221128002043.1555543-3-mizhang@google.com (mailing list archive)
State New, archived
Headers show
Series Deprecate BUG() in pte_list_remove() in shadow mmu | expand

Commit Message

Mingwei Zhang Nov. 28, 2022, 12:20 a.m. UTC
Replace BUG() in pte_list_remove() with KVM_BUG() to avoid crashing the
host. MMU bug is difficult to discover due to various racing conditions and
corner cases and thus it extremely hard to debug. The situation gets much
worse when it triggers the shutdown of a host. Host machine crash
eliminates everything including the potential clues for debugging.

From cloud computing service perspective, BUG() or BUG_ON() is probably no
longer appropriate as the host reliability is top priority. Crashing the
physical machine is almost never a good option as it eliminates innocent
VMs and cause service outage in a larger scope. Even worse, if attacker can
reliably triggers this code by diverting the control flow or corrupting the
memory, then this becomes vm-of-death attack. This is a huge attack vector
to cloud providers, as the death of one single host machine is not the end
of the story. Without manual interferences, a failed cloud job may be
dispatched to other hosts and continue host crashes until all of them are
dead.

Because of the above reasons, shrink the scope of crash to the target VM
only. KVM_BUG() and KVM_BUG_ON() requires a valid struct kvm which requires
extra plumbing. Avoid it in this version by just using
kvm_get_running_vcpu()->kvm instead.

Cc: Nagareddy Reddy <nspreddy@google.com>
Cc: Jim Mattson <jmattson@google.com>
Cc: David Matlack <dmatlack@google.com>
Signed-off-by: Mingwei Zhang <mizhang@google.com>
---
 arch/x86/kvm/mmu/mmu.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

Comments

Sean Christopherson Nov. 28, 2022, 5:46 p.m. UTC | #1
On Mon, Nov 28, 2022, Mingwei Zhang wrote:
> Replace BUG() in pte_list_remove() with KVM_BUG() to avoid crashing the
> host. MMU bug is difficult to discover due to various racing conditions and
> corner cases and thus it extremely hard to debug. The situation gets much
> worse when it triggers the shutdown of a host. Host machine crash
> eliminates everything including the potential clues for debugging.
> 
> From cloud computing service perspective, BUG() or BUG_ON() is probably no
> longer appropriate as the host reliability is top priority.

I don't think we need to bring "cloud computing" into this.  Linus has made it
clear over and over and over that BUG() / BUG_ON() need to be avoided unless
the alternative is worse.  E.g. the BUG() in __handle_changed_spte() is warranted
because the alternative is silent corruption of guest data.

> Crashing the physical machine is almost never a good option as it eliminates
> innocent VMs and cause service outage in a larger scope. Even worse, if
> attacker can reliably triggers this code by diverting the control flow or
> corrupting the memory,

Or if there's a KVM bug, which is waaaaay more likely.

> then this becomes vm-of-death attack.

This is true of any BUG(), and really of any unexpected fault while holding a
spinlock, e.g. NULL pointer derefs in the MMU are almost always fatal as well.

> This is a huge attack vector to cloud providers, as the death of one single
> host machine is not the end of the story. Without manual interferences, a
> failed cloud job may be dispatched to other hosts and continue host crashes
> until all of them are dead.
> 
> Because of the above reasons, shrink the scope of crash to the target VM
> only. KVM_BUG() and KVM_BUG_ON() requires a valid struct kvm which requires
> extra plumbing. Avoid it in this version by just using
> kvm_get_running_vcpu()->kvm instead.

Stale comment.

> Cc: Nagareddy Reddy <nspreddy@google.com>
> Cc: Jim Mattson <jmattson@google.com>
> Cc: David Matlack <dmatlack@google.com>
> Signed-off-by: Mingwei Zhang <mizhang@google.com>
> ---
>  arch/x86/kvm/mmu/mmu.c | 6 +++---
>  1 file changed, 3 insertions(+), 3 deletions(-)
> 
> diff --git a/arch/x86/kvm/mmu/mmu.c b/arch/x86/kvm/mmu/mmu.c
> index b5a44b8f5f7b..e132d82ab4c0 100644
> --- a/arch/x86/kvm/mmu/mmu.c
> +++ b/arch/x86/kvm/mmu/mmu.c
> @@ -956,12 +956,12 @@ static void pte_list_remove(struct kvm *kvm, u64 *spte,
>  
>  	if (!rmap_head->val) {
>  		pr_err("%s: %p 0->BUG\n", __func__, spte);

These probably need to be ratelimited (or "once").  Bugging the VM will prevent
doing anything useful with the VM, but KVM still needs to destroy the VM, which
means zapping SPTEs and purging the rmaps.  Theoretically, there could be thousands
of broken rmaps.

> -		BUG();
> +		KVM_BUG(true, kvm, "");

If you don't want to provide a message, use KVM_BUG_ON(), not an empty message.
Though my vote would be to fold the existing pr_err() messages into KVM_BUG(),
which would make the WARN much more helpful and would address the pr_err() issue
above.  The __func__ printing can also go away in that case because the stack
track will provide all the necessary info.  The only reason not to drop the
pr_err() entirely is if a ratelimited message is helpful for debugging failures
that occur in production, which I doubt it true.

And rather than pass "true", wrap the actual check with the KVM_BUG().

>  	} else if (!(rmap_head->val & 1)) {
>  		rmap_printk("%p 1->0\n", spte);
>  		if ((u64 *)rmap_head->val != spte) {
>  			pr_err("%s:  %p 1->BUG\n", __func__, spte);
> -			BUG();
> +			KVM_BUG(true, kvm, "");

KVM needs to return here, otherwise KVM is knowingly writing a garbage pointer,
e.g. will corrupt memory or trigger a fault.

>  		}
>  		rmap_head->val = 0;
>  	} else {

Something like this?

---
 arch/x86/kvm/mmu/mmu.c | 20 ++++++++++----------
 1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/x86/kvm/mmu/mmu.c b/arch/x86/kvm/mmu/mmu.c
index b5a44b8f5f7b..12790ccb8731 100644
--- a/arch/x86/kvm/mmu/mmu.c
+++ b/arch/x86/kvm/mmu/mmu.c
@@ -954,15 +954,16 @@ static void pte_list_remove(struct kvm *kvm, u64 *spte,
 	struct pte_list_desc *prev_desc;
 	int i;
 
-	if (!rmap_head->val) {
-		pr_err("%s: %p 0->BUG\n", __func__, spte);
-		BUG();
-	} else if (!(rmap_head->val & 1)) {
+	if (KVM_BUG(!rmap_head->val, kvm, "rmap for %p is empty", spte))
+		return;
+
+	if (!(rmap_head->val & 1)) {
 		rmap_printk("%p 1->0\n", spte);
-		if ((u64 *)rmap_head->val != spte) {
-			pr_err("%s:  %p 1->BUG\n", __func__, spte);
-			BUG();
-		}
+
+		if (KVM_BUG((u64 *)rmap_head->val != spte, kvm,
+			    "single rmap for %p doesn't match", spte))
+			return;
+
 		rmap_head->val = 0;
 	} else {
 		rmap_printk("%p many->many\n", spte);
@@ -979,8 +980,7 @@ static void pte_list_remove(struct kvm *kvm, u64 *spte,
 			prev_desc = desc;
 			desc = desc->more;
 		}
-		pr_err("%s: %p many->many\n", __func__, spte);
-		BUG();
+		KVM_BUG(true, kvm, "no rmap for %p (many->many)", spte);
 	}
 }
 

base-commit: d74237e747db7f9f27e821e6683d58185e846378
--
Mingwei Zhang Nov. 28, 2022, 7:26 p.m. UTC | #2
> Something like this?
>
> ---
>  arch/x86/kvm/mmu/mmu.c | 20 ++++++++++----------
>  1 file changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/arch/x86/kvm/mmu/mmu.c b/arch/x86/kvm/mmu/mmu.c
> index b5a44b8f5f7b..12790ccb8731 100644
> --- a/arch/x86/kvm/mmu/mmu.c
> +++ b/arch/x86/kvm/mmu/mmu.c
> @@ -954,15 +954,16 @@ static void pte_list_remove(struct kvm *kvm, u64 *spte,
>         struct pte_list_desc *prev_desc;
>         int i;
>
> -       if (!rmap_head->val) {
> -               pr_err("%s: %p 0->BUG\n", __func__, spte);
> -               BUG();
> -       } else if (!(rmap_head->val & 1)) {
> +       if (KVM_BUG(!rmap_head->val, kvm, "rmap for %p is empty", spte))
> +               return;
> +
> +       if (!(rmap_head->val & 1)) {
>                 rmap_printk("%p 1->0\n", spte);
> -               if ((u64 *)rmap_head->val != spte) {
> -                       pr_err("%s:  %p 1->BUG\n", __func__, spte);
> -                       BUG();
> -               }
> +
> +               if (KVM_BUG((u64 *)rmap_head->val != spte, kvm,
> +                           "single rmap for %p doesn't match", spte))
> +                       return;
> +
>                 rmap_head->val = 0;
>         } else {
>                 rmap_printk("%p many->many\n", spte);
> @@ -979,8 +980,7 @@ static void pte_list_remove(struct kvm *kvm, u64 *spte,
>                         prev_desc = desc;
>                         desc = desc->more;
>                 }
> -               pr_err("%s: %p many->many\n", __func__, spte);
> -               BUG();
> +               KVM_BUG(true, kvm, "no rmap for %p (many->many)", spte);
>         }
>  }
>
>
> base-commit: d74237e747db7f9f27e821e6683d58185e846378
> --
>

make sense, will update that in the next version.
diff mbox series

Patch

diff --git a/arch/x86/kvm/mmu/mmu.c b/arch/x86/kvm/mmu/mmu.c
index b5a44b8f5f7b..e132d82ab4c0 100644
--- a/arch/x86/kvm/mmu/mmu.c
+++ b/arch/x86/kvm/mmu/mmu.c
@@ -956,12 +956,12 @@  static void pte_list_remove(struct kvm *kvm, u64 *spte,
 
 	if (!rmap_head->val) {
 		pr_err("%s: %p 0->BUG\n", __func__, spte);
-		BUG();
+		KVM_BUG(true, kvm, "");
 	} else if (!(rmap_head->val & 1)) {
 		rmap_printk("%p 1->0\n", spte);
 		if ((u64 *)rmap_head->val != spte) {
 			pr_err("%s:  %p 1->BUG\n", __func__, spte);
-			BUG();
+			KVM_BUG(true, kvm, "");
 		}
 		rmap_head->val = 0;
 	} else {
@@ -980,7 +980,7 @@  static void pte_list_remove(struct kvm *kvm, u64 *spte,
 			desc = desc->more;
 		}
 		pr_err("%s: %p many->many\n", __func__, spte);
-		BUG();
+		KVM_BUG(true, kvm, "");
 	}
 }