| Message ID | 20230201132051.126868-12-pmorel@linux.ibm.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | s390x: CPU Topology | expand |
On Wed, 2023-02-01 at 14:20 +0100, Pierre Morel wrote: > > > > Add some basic examples for the definition of cpu topology > > > > in s390x. > > > > > > > > Signed-off-by: Pierre Morel <pmorel@linux.ibm.com> > > > > --- > > > > docs/system/s390x/cpu-topology.rst | 294 +++++++++++++++++++++++++++++ > > > > docs/system/target-s390x.rst | 1 + > > > > 2 files changed, 295 insertions(+) > > > > create mode 100644 docs/system/s390x/cpu-topology.rst > > > > > > > > diff --git a/docs/system/s390x/cpu-topology.rst b/docs/system/s390x/cpu-topology.rst > > > > new file mode 100644 > > > > index 0000000000..e2190318c0 > > > > --- /dev/null > > > > +++ b/docs/system/s390x/cpu-topology.rst > > > > @@ -0,0 +1,294 @@ > > > > +CPU topology on s390x > > > > +===================== > > > > + > > > > +Since QEMU 8.0, CPU topology on s390x provides up to 4 levels of > > > > +topology containers: drawers, books, sockets and cores. Cores isn't a container itself, at least as defined by STSI. Maybe use "nodes" instead? > > > > + > > > > +The first three containers define a tree hierarchy, the last one > > > > +provides the placement of the CPUs inside the parent container and > > > > +3 CPU attributes: The latter half of the sentence is a bit confusing, it's too informed by the output of STSI. Suggestion: The first three are containers, defining a tree shaped hierarchy. There are three attributes associated with each core: > > > > + > > > > +- CPU type > > > > +- polarity entitlement > > > > +- dedication > > > > + > > > > +Note also that since 7.2 threads are no longer supported in the topology > > > > +and the ``-smp`` command line argument accepts only ``threads=1``. > > > > + > > > > +Prerequisites > > > > +------------- > > > > + > > > > +To use CPU topology a Linux QEMU/KVM machine providing the CPU topology facility > > > > +(STFLE bit 11) is required. > > > > + > > > > +However, since this facility has been enabled by default in an early version > > > > +of QEMU, we use a capability, ``KVM_CAP_S390_CPU_TOPOLOGY``, to notify KVM > > > > +that QEMU is supporting CPU topology. supports > > > > + > > > > +Enabling CPU topology > > > > +--------------------- > > > > + > > > > +Currently, CPU topology is only enabled in the host model by default. > > > > + > > > > +Enabling CPU topology in a CPU model is done by setting the CPU flag > > > > +``ctop`` to ``on`` like in: > > > > + > > > > +.. code-block:: bash > > > > + > > > > + -cpu gen16b,ctop=on > > > > + > > > > +Having the topology disabled by default allows migration between > > > > +old and new QEMU without adding new flags. > > > > + > > > > +Default topology usage > > > > +---------------------- > > > > + > > > > +The CPU topology, can be specified on the QEMU command line Drop the comma. > > > > +with the ``-smp`` or the ``-device`` QEMU command arguments > > > > +without using any new attributes. Might want to split this up for -smp and -device. If none of the new attributes (drawers, books) are specified for the -smp flag, <description of default> If none of the new attributes (drawer, book, dedicated, entitlement) are specified for the -device cpu flag, the topology will be ... > > > > +In this case, the topology will be calculated by simply adding > > > > +to the topology the cores based on the core-id starting with > > > > +core-0 at position 0 of socket-0, book-0, drawer-0 with default > > > > +modifier attributes: horizontal polarity and no dedication. > > > > + > > > > +In the following machine we define 8 sockets with 4 cores each. > > > > +Note that s390x QEMU machines do not implement multithreading. You could drop that since you already said it earlier. > > > > + > > > > +.. code-block:: bash > > > > + > > > > + $ qemu-system-s390x -m 2G \ > > > > + -cpu gen16b,ctop=on \ > > > > + -smp cpus=5,sockets=8,cores=4,maxcpus=32 \ > > > > + -device host-s390x-cpu,core-id=14 \ > > > > + > > > > +New CPUs can be plugged using the device_add hmp command like in: "as in" or "like so" sounds better to my non-native ears. Applies to other instances, too. > > > > > + > > > > +.. code-block:: bash > > > > + > > > > + (qemu) device_add gen16b-s390x-cpu,core-id=9 > > > > + > > > > +The core-id defines the placement of the core in the topology by > > > > +starting with core 0 in socket 0 up to maxcpus. Suggestion: The same placement of the CPU is derived from the core-id as described above. > > > > + > > > > +In the example above: > > > > + > > > > +* There are 5 CPUs provided to the guest with the ``-smp`` command line > > > > + They will take the core-ids 0,1,2,3,4 > > > > + As we have 4 cores in a socket, we have 4 CPUs provided > > > > + to the guest in socket 0, with core-ids 0,1,2,3. > > > > + The last cpu, with core-id 4, will be on socket 1. > > > > + > > > > +* the core with ID 14 provided by the ``-device`` command line will > > > > + be placed in socket 3, with core-id 14 > > > > + > > > > +* the core with ID 9 provided by the ``device_add`` qmp command will You said it's a hmp command earlier. > > > > + be placed in socket 2, with core-id 9 > > > > + > > > > +Polarity and dedication s/Polarity/Polarization, same below > > > > +----------------------- > > > > + > > > > +Polarity can be of two types: horizontal or vertical. > > > > + > > > > +The horizontal polarization specifies that all guest's vCPUs get > > > > +almost the same amount of provisioning of real CPU by the host. > > > > + > > > > +The vertical polarization specifies that guest's vCPU can get > > > > +different real CPU provisions: > > > > + No reason to capitalize vertical below, is there? > > > > +- a vCPU with Vertical high entitlement specifies that this > > > > + vCPU gets 100% of the real CPU provisioning. > > > > + > > > > +- a vCPU with Vertical medium entitlement specifies that this > > > > + vCPU shares the real CPU with other vCPUs. > > > > + > > > > +- a vCPU with Vertical low entitlement specifies that this > > > > + vCPU only get real CPU provisioning when no other vCPU need it. getS, vCPUs or needS > > > > + > > > > +In the case a vCPU with vertical high entitlement does not use In case > > > > +the real CPU, the unused "slack" can be dispatched to other vCPU vCPUs > > > > +with medium or low entitlement. > > > > + > > > > +A subsystem reset puts all vCPU of the configuration into the vCPUs > > > > +horizontal polarization. > > > > + > > > > +The admin specifies the dedicated bit when the vCPU is dedicated > > > > +to a single real CPU. > > > > + > > > > +As for the Linux admin, the dedicated bit is an indication on the Drop everything before the comma. indication of > > > > +affinity of a vCPU for a real CPU while the entitlement indicates the affinity of a vCPU to a real CPU, while > > > > +sharing or exclusivity of use. > > > > + > > > > +Defining the topology on command line on the command line > > > > +------------------------------------- > > > > + > > > > +The topology can be defined entirely during the CPU definition, The topology can entirely be defined using -device cpu statements, > > > > +with the exception of CPU 0 which must be defined with the -smp > > > > +argument. > > > > + > > > > +For example, here we set the position of the cores 1,2,3 on position ... to > > > > +drawer 1, book 1, socket 2 and cores 0,9 and 14 on drawer 0, same here, s/on/to > > > > +book 0, socket 0 with all horizontal polarity and not dedicated. > > > > +The core 4, will be set on its default position on socket 1 set to ... in socket 1 > > > > +(since we have 4 core per socket) and we define it with dedication and > > > > +vertical high entitlement. > > > > + > > > > +.. code-block:: bash > > > > + > > > > + $ qemu-system-s390x -m 2G \ > > > > + -cpu gen16b,ctop=on \ > > > > + -smp cpus=1,sockets=8,cores=4,maxcpus=32 \ > > > > + \ > > > > + -device gen16b-s390x-cpu,drawer-id=1,book-id=1,socket-id=2,core-id=1 \ > > > > + -device gen16b-s390x-cpu,drawer-id=1,book-id=1,socket-id=2,core-id=2 \ > > > > + -device gen16b-s390x-cpu,drawer-id=1,book-id=1,socket-id=2,core-id=3 \ > > > > + \ > > > > + -device gen16b-s390x-cpu,drawer-id=0,book-id=0,socket-id=0,core-id=9 \ > > > > + -device gen16b-s390x-cpu,drawer-id=0,book-id=0,socket-id=0,core-id=14 \ > > > > + \ > > > > + -device gen16b-s390x-cpu,core-id=4,dedicated=on,polarity=3 \ > > > > + > > > > +QAPI interface for topology > > > > +--------------------------- > > > > + > > > > +Let's start QEMU with the following command: > > > > + > > > > +.. code-block:: bash > > > > + > > > > + sudo /usr/local/bin/qemu-system-s390x \ > > > > + -enable-kvm \ > > > > + -cpu z14,ctop=on \ > > > > + -smp 1,drawers=3,books=3,sockets=2,cores=2,maxcpus=36 \ > > > > + \ > > > > + -device z14-s390x-cpu,core-id=19,polarity=3 \ > > > > + -device z14-s390x-cpu,core-id=11,polarity=1 \ > > > > + -device z14-s390x-cpu,core-id=112,polarity=3 \ > > > > + ... > > > > + > > > > +and see the result when using of the QAPI interface. s/of// > > > > + > > > > +addons to query-cpus-fast > > > > ++++++++++++++++++++++++++ > > > > + > > > > +The command query-cpus-fast allows the admin to query the topology > > > > +tree and modifiers for all configured vCPU. vCPUs > > > > + > > > > +.. code-block:: QMP > > > > + > > > > + -> { "execute": "query-cpus-fast" } > > > > + { > > > > + "return": [ > > > > + { > > > > + "dedicated": false, > > > > + "thread-id": 3631238, > > > > + "props": { > > > > + "core-id": 0, > > > > + "socket-id": 0, > > > > + "drawer-id": 0, > > > > + "book-id": 0 > > > > + }, > > > > + "cpu-state": "operating", > > > > + "qom-path": "/machine/unattached/device[0]", > > > > + "polarity": 2, > > > > + "cpu-index": 0, > > > > + "target": "s390x" > > > > + }, > > > > + { > > > > + "dedicated": false, > > > > + "thread-id": 3631248, > > > > + "props": { > > > > + "core-id": 19, > > > > + "socket-id": 9, > > > > + "drawer-id": 0, > > > > + "book-id": 2 > > > > + }, > > > > + "cpu-state": "operating", > > > > + "qom-path": "/machine/peripheral-anon/device[0]", > > > > + "polarity": 3, > > > > + "cpu-index": 19, > > > > + "target": "s390x" > > > > + }, > > > > + { > > > > + "dedicated": false, > > > > + "thread-id": 3631249, > > > > + "props": { > > > > + "core-id": 11, > > > > + "socket-id": 5, > > > > + "drawer-id": 0, > > > > + "book-id": 1 > > > > + }, > > > > + "cpu-state": "operating", > > > > + "qom-path": "/machine/peripheral-anon/device[1]", > > > > + "polarity": 1, > > > > + "cpu-index": 11, > > > > + "target": "s390x" > > > > + }, > > > > + { > > > > + "dedicated": true, > > > > + "thread-id": 3631250, > > > > + "props": { > > > > + "core-id": 112, > > > > + "socket-id": 56, > > > > + "drawer-id": 3, > > > > + "book-id": 14 > > > > + }, > > > > + "cpu-state": "operating", > > > > + "qom-path": "/machine/peripheral-anon/device[2]", > > > > + "polarity": 3, > > > > + "cpu-index": 112, > > > > + "target": "s390x" > > > > + } > > > > + ] > > > > + } > > > > + > > > > +x-set-cpu-topology > > > > +++++++++++++++++++ > > > > + > > > > +The command x-set-cpu-topology allows the admin to modify the topology > > > > +tree or the topology modifiers of a vCPU in the configuration. > > > > + > > > > +.. code-block:: QMP > > > > + > > > > + -> { "execute": "x-set-cpu-topology", > > > > + "arguments": { > > > > + "core": 11, > > > > + "socket": 0, > > > > + "book": 0, > > > > + "drawer": 0, > > > > + "polarity": 0, > > > > + "dedicated": false > > > > + } > > > > + } > > > > + <- {"return": {}} > > > > + > > > > + > > > > +event CPU_POLARITY_CHANGE > > > > ++++++++++++++++++++++++++ > > > > + > > > > +When a guest is requesting a modification of the polarity, requests > > > > +QEMU sends a CPU_POLARITY_CHANGE event. > > > > + > > > > +When requesting the change, the guest only specifies horizontal or > > > > +vertical polarity. > > > > +The dedication and fine grain vertical entitlement depends on admin > > > > +to set according to its response to this event. It is the job of the admin to set the dedication and fine grained vertical entitlement in response to this event. > > > > + > > > > +Note that a vertical polarized dedicated vCPU can only have a high > > > > +entitlement, this gives 6 possibilities for a vCPU polarity: for vCPU polarization. > > > > + > > > > +- Horizontal > > > > +- Horizontal dedicated > > > > +- Vertical low > > > > +- Vertical medium > > > > +- Vertical high > > > > +- Vertical high dedicated > > > > + > > > > +Example of the event received when the guest issues the CPU instruction > > > > +Perform Topology Function PTF(0) to request an horizontal polarity: > > > > + > > > > +.. code-block:: QMP > > > > + > > > > + <- { "event": "CPU_POLARITY_CHANGE", > > > > + "data": { "polarity": 0 }, > > > > + "timestamp": { "seconds": 1401385907, "microseconds": 422329 } } > > > > + > > > > + > > > > diff --git a/docs/system/target-s390x.rst b/docs/system/target-s390x.rst > > > > index c636f64113..ff0ffe04f3 100644 > > > > --- a/docs/system/target-s390x.rst > > > > +++ b/docs/system/target-s390x.rst > > > > @@ -33,3 +33,4 @@ Architectural features > > > > .. toctree:: > > > > s390x/bootdevices > > > > s390x/protvirt > > > > + s390x/cpu-topology I'm not too big a fan of using "admin", I guess in reality it's mostly going to be libvirt adjusting things. Maybe reformulate sentences to get rid of it or use "outside administrative entity" or something similar. But in the end it's not too important.
diff --git a/docs/system/s390x/cpu-topology.rst b/docs/system/s390x/cpu-topology.rst new file mode 100644 index 0000000000..e2190318c0 --- /dev/null +++ b/docs/system/s390x/cpu-topology.rst @@ -0,0 +1,294 @@ +CPU topology on s390x +===================== + +Since QEMU 8.0, CPU topology on s390x provides up to 4 levels of +topology containers: drawers, books, sockets and cores. + +The first three containers define a tree hierarchy, the last one +provides the placement of the CPUs inside the parent container and +3 CPU attributes: + +- CPU type +- polarity entitlement +- dedication + +Note also that since 7.2 threads are no longer supported in the topology +and the ``-smp`` command line argument accepts only ``threads=1``. + +Prerequisites +------------- + +To use CPU topology a Linux QEMU/KVM machine providing the CPU topology facility +(STFLE bit 11) is required. + +However, since this facility has been enabled by default in an early version +of QEMU, we use a capability, ``KVM_CAP_S390_CPU_TOPOLOGY``, to notify KVM +that QEMU is supporting CPU topology. + +Enabling CPU topology +--------------------- + +Currently, CPU topology is only enabled in the host model by default. + +Enabling CPU topology in a CPU model is done by setting the CPU flag +``ctop`` to ``on`` like in: + +.. code-block:: bash + + -cpu gen16b,ctop=on + +Having the topology disabled by default allows migration between +old and new QEMU without adding new flags. + +Default topology usage +---------------------- + +The CPU topology, can be specified on the QEMU command line +with the ``-smp`` or the ``-device`` QEMU command arguments +without using any new attributes. +In this case, the topology will be calculated by simply adding +to the topology the cores based on the core-id starting with +core-0 at position 0 of socket-0, book-0, drawer-0 with default +modifier attributes: horizontal polarity and no dedication. + +In the following machine we define 8 sockets with 4 cores each. +Note that s390x QEMU machines do not implement multithreading. + +.. code-block:: bash + + $ qemu-system-s390x -m 2G \ + -cpu gen16b,ctop=on \ + -smp cpus=5,sockets=8,cores=4,maxcpus=32 \ + -device host-s390x-cpu,core-id=14 \ + +New CPUs can be plugged using the device_add hmp command like in: + +.. code-block:: bash + + (qemu) device_add gen16b-s390x-cpu,core-id=9 + +The core-id defines the placement of the core in the topology by +starting with core 0 in socket 0 up to maxcpus. + +In the example above: + +* There are 5 CPUs provided to the guest with the ``-smp`` command line + They will take the core-ids 0,1,2,3,4 + As we have 4 cores in a socket, we have 4 CPUs provided + to the guest in socket 0, with core-ids 0,1,2,3. + The last cpu, with core-id 4, will be on socket 1. + +* the core with ID 14 provided by the ``-device`` command line will + be placed in socket 3, with core-id 14 + +* the core with ID 9 provided by the ``device_add`` qmp command will + be placed in socket 2, with core-id 9 + +Polarity and dedication +----------------------- + +Polarity can be of two types: horizontal or vertical. + +The horizontal polarization specifies that all guest's vCPUs get +almost the same amount of provisioning of real CPU by the host. + +The vertical polarization specifies that guest's vCPU can get +different real CPU provisions: + +- a vCPU with Vertical high entitlement specifies that this + vCPU gets 100% of the real CPU provisioning. + +- a vCPU with Vertical medium entitlement specifies that this + vCPU shares the real CPU with other vCPUs. + +- a vCPU with Vertical low entitlement specifies that this + vCPU only get real CPU provisioning when no other vCPU need it. + +In the case a vCPU with vertical high entitlement does not use +the real CPU, the unused "slack" can be dispatched to other vCPU +with medium or low entitlement. + +A subsystem reset puts all vCPU of the configuration into the +horizontal polarization. + +The admin specifies the dedicated bit when the vCPU is dedicated +to a single real CPU. + +As for the Linux admin, the dedicated bit is an indication on the +affinity of a vCPU for a real CPU while the entitlement indicates the +sharing or exclusivity of use. + +Defining the topology on command line +------------------------------------- + +The topology can be defined entirely during the CPU definition, +with the exception of CPU 0 which must be defined with the -smp +argument. + +For example, here we set the position of the cores 1,2,3 on +drawer 1, book 1, socket 2 and cores 0,9 and 14 on drawer 0, +book 0, socket 0 with all horizontal polarity and not dedicated. +The core 4, will be set on its default position on socket 1 +(since we have 4 core per socket) and we define it with dedication and +vertical high entitlement. + +.. code-block:: bash + + $ qemu-system-s390x -m 2G \ + -cpu gen16b,ctop=on \ + -smp cpus=1,sockets=8,cores=4,maxcpus=32 \ + \ + -device gen16b-s390x-cpu,drawer-id=1,book-id=1,socket-id=2,core-id=1 \ + -device gen16b-s390x-cpu,drawer-id=1,book-id=1,socket-id=2,core-id=2 \ + -device gen16b-s390x-cpu,drawer-id=1,book-id=1,socket-id=2,core-id=3 \ + \ + -device gen16b-s390x-cpu,drawer-id=0,book-id=0,socket-id=0,core-id=9 \ + -device gen16b-s390x-cpu,drawer-id=0,book-id=0,socket-id=0,core-id=14 \ + \ + -device gen16b-s390x-cpu,core-id=4,dedicated=on,polarity=3 \ + +QAPI interface for topology +--------------------------- + +Let's start QEMU with the following command: + +.. code-block:: bash + + sudo /usr/local/bin/qemu-system-s390x \ + -enable-kvm \ + -cpu z14,ctop=on \ + -smp 1,drawers=3,books=3,sockets=2,cores=2,maxcpus=36 \ + \ + -device z14-s390x-cpu,core-id=19,polarity=3 \ + -device z14-s390x-cpu,core-id=11,polarity=1 \ + -device z14-s390x-cpu,core-id=112,polarity=3 \ + ... + +and see the result when using of the QAPI interface. + +addons to query-cpus-fast ++++++++++++++++++++++++++ + +The command query-cpus-fast allows the admin to query the topology +tree and modifiers for all configured vCPU. + +.. code-block:: QMP + + -> { "execute": "query-cpus-fast" } + { + "return": [ + { + "dedicated": false, + "thread-id": 3631238, + "props": { + "core-id": 0, + "socket-id": 0, + "drawer-id": 0, + "book-id": 0 + }, + "cpu-state": "operating", + "qom-path": "/machine/unattached/device[0]", + "polarity": 2, + "cpu-index": 0, + "target": "s390x" + }, + { + "dedicated": false, + "thread-id": 3631248, + "props": { + "core-id": 19, + "socket-id": 9, + "drawer-id": 0, + "book-id": 2 + }, + "cpu-state": "operating", + "qom-path": "/machine/peripheral-anon/device[0]", + "polarity": 3, + "cpu-index": 19, + "target": "s390x" + }, + { + "dedicated": false, + "thread-id": 3631249, + "props": { + "core-id": 11, + "socket-id": 5, + "drawer-id": 0, + "book-id": 1 + }, + "cpu-state": "operating", + "qom-path": "/machine/peripheral-anon/device[1]", + "polarity": 1, + "cpu-index": 11, + "target": "s390x" + }, + { + "dedicated": true, + "thread-id": 3631250, + "props": { + "core-id": 112, + "socket-id": 56, + "drawer-id": 3, + "book-id": 14 + }, + "cpu-state": "operating", + "qom-path": "/machine/peripheral-anon/device[2]", + "polarity": 3, + "cpu-index": 112, + "target": "s390x" + } + ] + } + +x-set-cpu-topology +++++++++++++++++++ + +The command x-set-cpu-topology allows the admin to modify the topology +tree or the topology modifiers of a vCPU in the configuration. + +.. code-block:: QMP + + -> { "execute": "x-set-cpu-topology", + "arguments": { + "core": 11, + "socket": 0, + "book": 0, + "drawer": 0, + "polarity": 0, + "dedicated": false + } + } + <- {"return": {}} + + +event CPU_POLARITY_CHANGE ++++++++++++++++++++++++++ + +When a guest is requesting a modification of the polarity, +QEMU sends a CPU_POLARITY_CHANGE event. + +When requesting the change, the guest only specifies horizontal or +vertical polarity. +The dedication and fine grain vertical entitlement depends on admin +to set according to its response to this event. + +Note that a vertical polarized dedicated vCPU can only have a high +entitlement, this gives 6 possibilities for a vCPU polarity: + +- Horizontal +- Horizontal dedicated +- Vertical low +- Vertical medium +- Vertical high +- Vertical high dedicated + +Example of the event received when the guest issues the CPU instruction +Perform Topology Function PTF(0) to request an horizontal polarity: + +.. code-block:: QMP + + <- { "event": "CPU_POLARITY_CHANGE", + "data": { "polarity": 0 }, + "timestamp": { "seconds": 1401385907, "microseconds": 422329 } } + + diff --git a/docs/system/target-s390x.rst b/docs/system/target-s390x.rst index c636f64113..ff0ffe04f3 100644 --- a/docs/system/target-s390x.rst +++ b/docs/system/target-s390x.rst @@ -33,3 +33,4 @@ Architectural features .. toctree:: s390x/bootdevices s390x/protvirt + s390x/cpu-topology
Add some basic examples for the definition of cpu topology in s390x. Signed-off-by: Pierre Morel <pmorel@linux.ibm.com> --- docs/system/s390x/cpu-topology.rst | 294 +++++++++++++++++++++++++++++ docs/system/target-s390x.rst | 1 + 2 files changed, 295 insertions(+) create mode 100644 docs/system/s390x/cpu-topology.rst