@@ -342,3 +342,15 @@
'TARGET_S390X',
'TARGET_MIPS',
'TARGET_LOONGARCH64' ] } }
+
+##
+# @CpuS390Polarization:
+#
+# An enumeration of cpu polarization that can be assumed by a virtual
+# S390 CPU
+#
+# Since: 8.0
+##
+{ 'enum': 'CpuS390Polarization',
+ 'prefix': 'S390_CPU_POLARIZATION',
+ 'data': [ 'horizontal', 'vertical' ] }
@@ -48,6 +48,18 @@
'prefix': 'S390_CPU_STATE',
'data': [ 'uninitialized', 'stopped', 'check-stop', 'operating', 'load' ] }
+##
+# @CpuS390Entitlement:
+#
+# An enumeration of cpu entitlements that can be assumed by a virtual
+# S390 CPU
+#
+# Since: 8.0
+##
+{ 'enum': 'CpuS390Entitlement',
+ 'prefix': 'S390_CPU_ENTITLEMENT',
+ 'data': [ 'horizontal', 'low', 'medium', 'high' ] }
+
##
# @CpuInfoS390:
#
@@ -70,7 +82,7 @@
#
# @thread-id: ID of the underlying host thread
#
-# @props: properties describing to which node/socket/core/thread
+# @props: properties describing to which node/drawer/book/socket/core/thread
# virtual CPU belongs to, provided if supported by board
#
# @target: the QEMU system emulation target, which determines which
@@ -900,13 +912,15 @@
# a CPU is being hotplugged.
#
# @node-id: NUMA node ID the CPU belongs to
-# @socket-id: socket number within node/board the CPU belongs to
+# @drawer-id: drawer number within node/board the CPU belongs to (since 8.0)
+# @book-id: book number within drawer/node/board the CPU belongs to (since 8.0)
+# @socket-id: socket number within book/node/board the CPU belongs to
# @die-id: die number within socket the CPU belongs to (since 4.1)
# @cluster-id: cluster number within die the CPU belongs to (since 7.1)
# @core-id: core number within cluster the CPU belongs to
# @thread-id: thread number within core the CPU belongs to
#
-# Note: currently there are 6 properties that could be present
+# Note: currently there are 8 properties that could be present
# but management should be prepared to pass through other
# properties with device_add command to allow for future
# interface extension. This also requires the filed names to be kept in
@@ -916,6 +930,8 @@
##
{ 'struct': 'CpuInstanceProperties',
'data': { '*node-id': 'int',
+ '*drawer-id': 'int',
+ '*book-id': 'int',
'*socket-id': 'int',
'*die-id': 'int',
'*cluster-id': 'int',
@@ -1465,6 +1481,10 @@
#
# @cpus: number of virtual CPUs in the virtual machine
#
+# @drawers: number of drawers in the CPU topology (since 8.0)
+#
+# @books: number of books in the CPU topology (since 8.0)
+#
# @sockets: number of sockets in the CPU topology
#
# @dies: number of dies per socket in the CPU topology
@@ -1481,6 +1501,8 @@
##
{ 'struct': 'SMPConfiguration', 'data': {
'*cpus': 'int',
+ '*drawers': 'int',
+ '*books': 'int',
'*sockets': 'int',
'*dies': 'int',
'*clusters': 'int',
@@ -131,12 +131,16 @@ typedef struct {
* @clusters_supported - whether clusters are supported by the machine
* @has_clusters - whether clusters are explicitly specified in the user
* provided SMP configuration
+ * @books_supported - whether books are supported by the machine
+ * @drawers_supported - whether drawers are supported by the machine
*/
typedef struct {
bool prefer_sockets;
bool dies_supported;
bool clusters_supported;
bool has_clusters;
+ bool books_supported;
+ bool drawers_supported;
} SMPCompatProps;
/**
@@ -301,7 +305,9 @@ typedef struct DeviceMemoryState {
/**
* CpuTopology:
* @cpus: the number of present logical processors on the machine
- * @sockets: the number of sockets on the machine
+ * @drawers: the number of drawers on the machine
+ * @books: the number of books in one drawer
+ * @sockets: the number of sockets in one book
* @dies: the number of dies in one socket
* @clusters: the number of clusters in one die
* @cores: the number of cores in one cluster
@@ -310,6 +316,8 @@ typedef struct DeviceMemoryState {
*/
typedef struct CpuTopology {
unsigned int cpus;
+ unsigned int drawers;
+ unsigned int books;
unsigned int sockets;
unsigned int dies;
unsigned int clusters;
new file mode 100644
@@ -0,0 +1,15 @@
+/*
+ * CPU Topology
+ *
+ * Copyright IBM Corp. 2022
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2 or (at
+ * your option) any later version. See the COPYING file in the top-level
+ * directory.
+ */
+#ifndef HW_S390X_CPU_TOPOLOGY_H
+#define HW_S390X_CPU_TOPOLOGY_H
+
+#define S390_TOPOLOGY_CPU_IFL 0x03
+
+#endif
@@ -131,6 +131,11 @@ struct CPUArchState {
#if !defined(CONFIG_USER_ONLY)
uint32_t core_id; /* PoP "CPU address", same as cpu_index */
+ int32_t socket_id;
+ int32_t book_id;
+ int32_t drawer_id;
+ bool dedicated;
+ uint8_t entitlement; /* Used only for vertical polarization */
uint64_t cpuid;
#endif
@@ -31,6 +31,14 @@ static char *cpu_hierarchy_to_string(MachineState *ms)
MachineClass *mc = MACHINE_GET_CLASS(ms);
GString *s = g_string_new(NULL);
+ if (mc->smp_props.drawers_supported) {
+ g_string_append_printf(s, " * drawers (%u)", ms->smp.drawers);
+ }
+
+ if (mc->smp_props.books_supported) {
+ g_string_append_printf(s, " * books (%u)", ms->smp.books);
+ }
+
g_string_append_printf(s, "sockets (%u)", ms->smp.sockets);
if (mc->smp_props.dies_supported) {
@@ -73,6 +81,8 @@ void machine_parse_smp_config(MachineState *ms,
{
MachineClass *mc = MACHINE_GET_CLASS(ms);
unsigned cpus = config->has_cpus ? config->cpus : 0;
+ unsigned drawers = config->has_drawers ? config->drawers : 0;
+ unsigned books = config->has_books ? config->books : 0;
unsigned sockets = config->has_sockets ? config->sockets : 0;
unsigned dies = config->has_dies ? config->dies : 0;
unsigned clusters = config->has_clusters ? config->clusters : 0;
@@ -85,6 +95,8 @@ void machine_parse_smp_config(MachineState *ms,
* explicit configuration like "cpus=0" is not allowed.
*/
if ((config->has_cpus && config->cpus == 0) ||
+ (config->has_drawers && config->drawers == 0) ||
+ (config->has_books && config->books == 0) ||
(config->has_sockets && config->sockets == 0) ||
(config->has_dies && config->dies == 0) ||
(config->has_clusters && config->clusters == 0) ||
@@ -111,6 +123,19 @@ void machine_parse_smp_config(MachineState *ms,
dies = dies > 0 ? dies : 1;
clusters = clusters > 0 ? clusters : 1;
+ if (!mc->smp_props.books_supported && books > 1) {
+ error_setg(errp, "books not supported by this machine's CPU topology");
+ return;
+ }
+ books = books > 0 ? books : 1;
+
+ if (!mc->smp_props.drawers_supported && drawers > 1) {
+ error_setg(errp,
+ "drawers not supported by this machine's CPU topology");
+ return;
+ }
+ drawers = drawers > 0 ? drawers : 1;
+
/* compute missing values based on the provided ones */
if (cpus == 0 && maxcpus == 0) {
sockets = sockets > 0 ? sockets : 1;
@@ -124,33 +149,41 @@ void machine_parse_smp_config(MachineState *ms,
if (sockets == 0) {
cores = cores > 0 ? cores : 1;
threads = threads > 0 ? threads : 1;
- sockets = maxcpus / (dies * clusters * cores * threads);
+ sockets = maxcpus /
+ (drawers * books * dies * clusters * cores * threads);
} else if (cores == 0) {
threads = threads > 0 ? threads : 1;
- cores = maxcpus / (sockets * dies * clusters * threads);
+ cores = maxcpus /
+ (drawers * books * sockets * dies * clusters * threads);
}
} else {
/* prefer cores over sockets since 6.2 */
if (cores == 0) {
sockets = sockets > 0 ? sockets : 1;
threads = threads > 0 ? threads : 1;
- cores = maxcpus / (sockets * dies * clusters * threads);
+ cores = maxcpus /
+ (drawers * books * sockets * dies * clusters * threads);
} else if (sockets == 0) {
threads = threads > 0 ? threads : 1;
- sockets = maxcpus / (dies * clusters * cores * threads);
+ sockets = maxcpus /
+ (drawers * books * dies * clusters * cores * threads);
}
}
/* try to calculate omitted threads at last */
if (threads == 0) {
- threads = maxcpus / (sockets * dies * clusters * cores);
+ threads = maxcpus /
+ (drawers * books * sockets * dies * clusters * cores);
}
}
- maxcpus = maxcpus > 0 ? maxcpus : sockets * dies * clusters * cores * threads;
+ maxcpus = maxcpus > 0 ? maxcpus : drawers * books * sockets * dies *
+ clusters * cores * threads;
cpus = cpus > 0 ? cpus : maxcpus;
ms->smp.cpus = cpus;
+ ms->smp.drawers = drawers;
+ ms->smp.books = books;
ms->smp.sockets = sockets;
ms->smp.dies = dies;
ms->smp.clusters = clusters;
@@ -161,7 +194,8 @@ void machine_parse_smp_config(MachineState *ms,
mc->smp_props.has_clusters = config->has_clusters;
/* sanity-check of the computed topology */
- if (sockets * dies * clusters * cores * threads != maxcpus) {
+ if (drawers * books * sockets * dies * clusters * cores * threads !=
+ maxcpus) {
g_autofree char *topo_msg = cpu_hierarchy_to_string(ms);
error_setg(errp, "Invalid CPU topology: "
"product of the hierarchy must match maxcpus: "
@@ -831,6 +831,8 @@ static void machine_get_smp(Object *obj, Visitor *v, const char *name,
MachineState *ms = MACHINE(obj);
SMPConfiguration *config = &(SMPConfiguration){
.has_cpus = true, .cpus = ms->smp.cpus,
+ .has_drawers = true, .drawers = ms->smp.drawers,
+ .has_books = true, .books = ms->smp.books,
.has_sockets = true, .sockets = ms->smp.sockets,
.has_dies = true, .dies = ms->smp.dies,
.has_clusters = true, .clusters = ms->smp.clusters,
@@ -1096,6 +1098,8 @@ static void machine_initfn(Object *obj)
/* default to mc->default_cpus */
ms->smp.cpus = mc->default_cpus;
ms->smp.max_cpus = mc->default_cpus;
+ ms->smp.drawers = 1;
+ ms->smp.books = 1;
ms->smp.sockets = 1;
ms->smp.dies = 1;
ms->smp.clusters = 1;
@@ -733,6 +733,8 @@ static void ccw_machine_class_init(ObjectClass *oc, void *data)
mc->no_sdcard = 1;
mc->max_cpus = S390_MAX_CPUS;
mc->has_hotpluggable_cpus = true;
+ mc->smp_props.books_supported = true;
+ mc->smp_props.drawers_supported = true;
assert(!mc->get_hotplug_handler);
mc->get_hotplug_handler = s390_get_hotplug_handler;
mc->cpu_index_to_instance_props = s390_cpu_index_to_props;
@@ -727,6 +727,12 @@ static QemuOptsList qemu_smp_opts = {
{
.name = "cpus",
.type = QEMU_OPT_NUMBER,
+ }, {
+ .name = "drawers",
+ .type = QEMU_OPT_NUMBER,
+ }, {
+ .name = "books",
+ .type = QEMU_OPT_NUMBER,
}, {
.name = "sockets",
.type = QEMU_OPT_NUMBER,
@@ -37,6 +37,7 @@
#ifndef CONFIG_USER_ONLY
#include "sysemu/reset.h"
#endif
+#include "hw/s390x/cpu-topology.h"
#define CR0_RESET 0xE0UL
#define CR14_RESET 0xC2000000UL;
@@ -259,6 +260,12 @@ static gchar *s390_gdb_arch_name(CPUState *cs)
static Property s390x_cpu_properties[] = {
#if !defined(CONFIG_USER_ONLY)
DEFINE_PROP_UINT32("core-id", S390CPU, env.core_id, 0),
+ DEFINE_PROP_INT32("socket-id", S390CPU, env.socket_id, -1),
+ DEFINE_PROP_INT32("book-id", S390CPU, env.book_id, -1),
+ DEFINE_PROP_INT32("drawer-id", S390CPU, env.drawer_id, -1),
+ DEFINE_PROP_BOOL("dedicated", S390CPU, env.dedicated, false),
+ DEFINE_PROP_UINT8("entitlement", S390CPU, env.entitlement,
+ S390_CPU_ENTITLEMENT_MEDIUM),
#endif
DEFINE_PROP_END_OF_LIST()
};
@@ -250,11 +250,14 @@ SRST
ERST
DEF("smp", HAS_ARG, QEMU_OPTION_smp,
- "-smp [[cpus=]n][,maxcpus=maxcpus][,sockets=sockets][,dies=dies][,clusters=clusters][,cores=cores][,threads=threads]\n"
+ "-smp [[cpus=]n][,maxcpus=maxcpus][,drawers=drawers][,books=books][,sockets=sockets]\n"
+ " [,dies=dies][,clusters=clusters][,cores=cores][,threads=threads]\n"
" set the number of initial CPUs to 'n' [default=1]\n"
" maxcpus= maximum number of total CPUs, including\n"
" offline CPUs for hotplug, etc\n"
- " sockets= number of sockets on the machine board\n"
+ " drawers= number of drawers on the machine board\n"
+ " books= number of books in one drawer\n"
+ " sockets= number of sockets in one book\n"
" dies= number of dies in one socket\n"
" clusters= number of clusters in one die\n"
" cores= number of cores in one cluster\n"