@@ -434,6 +434,7 @@
#define X86_FEATURE_SEV_ES (19*32+ 3) /* AMD Secure Encrypted Virtualization - Encrypted State */
#define X86_FEATURE_V_TSC_AUX (19*32+ 9) /* "" Virtual TSC_AUX */
#define X86_FEATURE_SME_COHERENT (19*32+10) /* "" AMD hardware-enforced cache coherency */
+#define X86_FEATURE_DEBUG_SWAP (19*32+14) /* AMD SEV-ES full debug state swap support */
/* AMD-defined Extended Feature 2 EAX, CPUID level 0x80000021 (EAX), word 20 */
#define X86_FEATURE_NO_NESTED_DATA_BP (20*32+ 0) /* "" No Nested Data Breakpoints */
@@ -288,6 +288,7 @@ static_assert((X2AVIC_MAX_PHYSICAL_ID & AVIC_PHYSICAL_MAX_INDEX_MASK) == X2AVIC_
#define AVIC_HPA_MASK ~((0xFFFULL << 52) | 0xFFF)
+#define SVM_SEV_FEAT_DEBUG_SWAP BIT(5)
struct vmcb_seg {
u16 selector;
@@ -434,6 +434,7 @@
#define X86_FEATURE_SEV_ES (19*32+ 3) /* AMD Secure Encrypted Virtualization - Encrypted State */
#define X86_FEATURE_V_TSC_AUX (19*32+ 9) /* "" Virtual TSC_AUX */
#define X86_FEATURE_SME_COHERENT (19*32+10) /* "" AMD hardware-enforced cache coherency */
+#define X86_FEATURE_DEBUG_SWAP (19*32+14) /* AMD SEV-ES full debug state swap support */
/* AMD-defined Extended Feature 2 EAX, CPUID level 0x80000021 (EAX), word 20 */
#define X86_FEATURE_NO_NESTED_DATA_BP (20*32+ 0) /* "" No Nested Data Breakpoints */
@@ -23,6 +23,7 @@
#include <asm/pkru.h>
#include <asm/trapnr.h>
#include <asm/fpu/xcr.h>
+#include <asm/debugreg.h>
#include "mmu.h"
#include "x86.h"
@@ -54,9 +55,14 @@ module_param_named(sev, sev_enabled, bool, 0444);
/* enable/disable SEV-ES support */
static bool sev_es_enabled = true;
module_param_named(sev_es, sev_es_enabled, bool, 0444);
+
+/* enable/disable SEV-ES DebugSwap support */
+static bool sev_es_debug_swap_enabled = true;
+module_param_named(debug_swap, sev_es_debug_swap_enabled, bool, 0444);
#else
#define sev_enabled false
#define sev_es_enabled false
+#define sev_es_debug_swap_enabled false
#endif /* CONFIG_KVM_AMD_SEV */
static u8 sev_enc_bit;
@@ -606,6 +612,9 @@ static int sev_es_sync_vmsa(struct vcpu_svm *svm)
save->xss = svm->vcpu.arch.ia32_xss;
save->dr6 = svm->vcpu.arch.dr6;
+ if (sev_es_debug_swap_enabled)
+ save->sev_features |= SVM_SEV_FEAT_DEBUG_SWAP;
+
pr_debug("Virtual Machine Save Area (VMSA):\n");
print_hex_dump_debug("", DUMP_PREFIX_NONE, 16, 1, save, sizeof(*save), false);
@@ -2258,6 +2267,9 @@ void __init sev_hardware_setup(void)
out:
sev_enabled = sev_supported;
sev_es_enabled = sev_es_supported;
+ if (!sev_es_enabled || !cpu_feature_enabled(X86_FEATURE_DEBUG_SWAP) ||
+ !cpu_feature_enabled(X86_FEATURE_NO_NESTED_DATA_BP))
+ sev_es_debug_swap_enabled = false;
#endif
}
@@ -2978,14 +2990,17 @@ static void sev_es_init_vmcb(struct vcpu_svm *svm)
svm_set_intercept(svm, TRAP_CR8_WRITE);
/*
+ * Unless DebugSwap (depends on X86_FEATURE_NO_NESTED_DATA_BP) is enabled,
* DR7 access must remain intercepted for an SEV-ES guest to disallow
* the guest kernel set up a #DB on memory that's needed to vector a #DB
* as otherwise the CPU gets stuck in an infinite #DB loop.
*/
vmcb->control.intercepts[INTERCEPT_DR] = 0;
- vmcb_set_intercept(&vmcb->control, INTERCEPT_DR7_READ);
- vmcb_set_intercept(&vmcb->control, INTERCEPT_DR7_WRITE);
- recalc_intercepts(svm);
+ if (!sev_es_debug_swap_enabled) {
+ vmcb_set_intercept(&vmcb->control, INTERCEPT_DR7_READ);
+ vmcb_set_intercept(&vmcb->control, INTERCEPT_DR7_WRITE);
+ recalc_intercepts(svm);
+ }
/* Can't intercept XSETBV, HV can't modify XCR0 directly */
svm_clr_intercept(svm, INTERCEPT_XSETBV);
@@ -3055,6 +3070,22 @@ void sev_es_prepare_switch_to_guest(struct sev_es_save_area *hostsa)
hostsa->xcr0 = xgetbv(XCR_XFEATURE_ENABLED_MASK);
hostsa->pkru = read_pkru();
hostsa->xss = host_xss;
+
+ /*
+ * If DebugSwap is enabled, debug registers are loaded but NOT saved by
+ * the CPU (Type-B). If DebugSwap is disabled/unsupported, the CPU both
+ * saves and loads debug registers (Type-A).
+ */
+ if (sev_es_debug_swap_enabled) {
+ hostsa->dr0 = native_get_debugreg(0);
+ hostsa->dr1 = native_get_debugreg(1);
+ hostsa->dr2 = native_get_debugreg(2);
+ hostsa->dr3 = native_get_debugreg(3);
+ hostsa->dr0_addr_mask = amd_get_dr_addr_mask(0);
+ hostsa->dr1_addr_mask = amd_get_dr_addr_mask(1);
+ hostsa->dr2_addr_mask = amd_get_dr_addr_mask(2);
+ hostsa->dr3_addr_mask = amd_get_dr_addr_mask(3);
+ }
}
void sev_vcpu_deliver_sipi_vector(struct kvm_vcpu *vcpu, u8 vector)
Add support for "DebugSwap for SEV-ES guests", which provides support for swapping DR[0-3] and DR[0-3]_ADDR_MASK on VMRUN and VMEXIT, i.e. allows KVM to expose debug capabilities to SEV-ES guests. Without DebugSwap support, the CPU doesn't save/load most _guest_ debug registers (except DR6/7), and KVM cannot manually context switch guest DRs due the VMSA being encrypted. Enable DebugSwap if and only if the CPU also supports NoNestedDataBp, which causes the CPU to ignore nested #DBs, i.e. #DBs that occur when vectoring a #DB. Without NoNestedDataBp, a malicious guest can DoS the host by putting the CPU into an infinite loop of vectoring #DBs (see https://bugzilla.redhat.com/show_bug.cgi?id=1278496) Set the features bit in sev_es_sync_vmsa() which is the last point when VMSA is not encrypted yet as sev_(es_)init_vmcb() (where the most init happens) is called not only when VCPU is initialised but also on intrahost migration when VMSA is encrypted. Eliminate DR7 intercepts as KVM can't modify guest DR7, and intercepting DR7 would completely defeat the purpose of enabling DebugSwap. Make X86_FEATURE_DEBUG_SWAP appear in /proc/cpuinfo (by not adding "") to let the operator know if the VM can debug. Signed-off-by: Alexey Kardashevskiy <aik@amd.com> --- Changes: v6: * rewrote the commit log as suggested by Sean * clr_exception_intercept(#DB) moved to a separate patch (next to this) * updated tools/arch/x86/include/asm/cpufeatures.h (old versions from when this was a single patch, ignore?) v9: * changed the commit log to one from Sean * moved #DB intercept handling later in the series v5: * added CPUID's DebugSwap feature * commit log, comments updated * redid the whole thing v4: * removed sev_es_is_debug_swap_enabled() helper * made sev_es_debug_swap_enabled (module param) static * set sev_feature early in sev_es_init_vmcb() and made intercepts dependend on it vs. module param * move set_/clr_dr_intercepts to .c v3: * rewrote the commit log again * rebased on tip/master to use recently defined X86_FEATURE_NO_NESTED_DATA_BP * s/boot_cpu_has/cpu_feature_enabled/ v2: * debug_swap moved from vcpu to module_param * rewrote commit log --- Tested with: === int x; int main(int argc, char *argv[]) { x = 1; return 0; } === gcc -g a.c rsync a.out ruby-954vm:~/ ssh -t ruby-954vm 'gdb -ex "file a.out" -ex "watch x" -ex r' where ruby-954vm is a VM. With "/sys/module/kvm_amd/parameters/debug_swap = 0", gdb does not stop on the watchpoint, with "= 1" - gdb does. --- arch/x86/include/asm/cpufeatures.h | 1 + arch/x86/include/asm/svm.h | 1 + tools/arch/x86/include/asm/cpufeatures.h | 1 + arch/x86/kvm/svm/sev.c | 37 ++++++++++++++++++-- 4 files changed, 37 insertions(+), 3 deletions(-)