diff mbox series

[v2,14/16] virtio-mem: Expose device memory via multiple memslots if enabled

Message ID 20230825132149.366064-15-david@redhat.com (mailing list archive)
State New, archived
Headers show
Series virtio-mem: Expose device memory through multiple memslots | expand

Commit Message

David Hildenbrand Aug. 25, 2023, 1:21 p.m. UTC
Having large virtio-mem devices that only expose little memory to a VM
is currently a problem: we map the whole sparse memory region into the
guest using a single memslot, resulting in one gigantic memslot in KVM.
KVM allocates metadata for the whole memslot, which can result in quite
some memory waste.

Assuming we have a 1 TiB virtio-mem device and only expose little (e.g.,
1 GiB) memory, we would create a single 1 TiB memslot and KVM has to
allocate metadata for that 1 TiB memslot: on x86, this implies allocating
a significant amount of memory for metadata:

(1) RMAP: 8 bytes per 4 KiB, 8 bytes per 2 MiB, 8 bytes per 1 GiB
    -> For 1 TiB: 2147483648 + 4194304 + 8192 = ~ 2 GiB (0.2 %)

    With the TDP MMU (cat /sys/module/kvm/parameters/tdp_mmu) this gets
    allocated lazily when required for nested VMs
(2) gfn_track: 2 bytes per 4 KiB
    -> For 1 TiB: 536870912 = ~512 MiB (0.05 %)
(3) lpage_info: 4 bytes per 2 MiB, 4 bytes per 1 GiB
    -> For 1 TiB: 2097152 + 4096 = ~2 MiB (0.0002 %)
(4) 2x dirty bitmaps for tracking: 2x 1 bit per 4 KiB page
    -> For 1 TiB: 536870912 = 64 MiB (0.006 %)

So we primarily care about (1) and (2). The bad thing is, that the
memory consumption *doubles* once SMM is enabled, because we create the
memslot once for !SMM and once for SMM.

Having a 1 TiB memslot without the TDP MMU consumes around:
* With SMM: 5 GiB
* Without SMM: 2.5 GiB
Having a 1 TiB memslot with the TDP MMU consumes around:
* With SMM: 1 GiB
* Without SMM: 512 MiB

... and that's really something we want to optimize, to be able to just
start a VM with small boot memory (e.g., 4 GiB) and a virtio-mem device
that can grow very large (e.g., 1 TiB).

Consequently, using multiple memslots and only mapping the memslots we
really need can significantly reduce memory waste and speed up
memslot-related operations. Let's expose the sparse RAM memory region using
multiple memslots, mapping only the memslots we currently need into our
device memory region container.

* With VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE, we only map the memslots that
  actually have memory plugged, and dynamically (un)map when
  (un)plugging memory blocks.

* Without VIRTIO_MEM_F_UNPLUGGED_INACCESSIBLE, we always map the memslots
  covered by the usable region, and dynamically (un)map when resizing the
  usable region.

We'll auto-detect the number of memslots to use based on the memslot limit
provided by the core. We'll use at most 1 memslot per gigabyte. Note that
our global limit of memslots accross all memory devices is currently set to
256: even with multiple large virtio-mem devices, we'd still have a sane
limit on the number of memslots used.

The default is a single memslot for now ("multiple-memslots=off"). The
optimization must be enabled manually using "multiple-memslots=on", because
some vhost setups (e.g., hotplug of vhost-user devices) might be
problematic until we support more memslots especially in vhost-user
backends.

Note that "multiple-memslots=on" is just a hint that multiple memslots
*may* be used for internal optimizations, not that multiple memslots
*must* be used. The actual number of memslots that are used is an
internal detail: for example, once memslot metadata is no longer an
issue, we could simply stop optimizing for that. Migration source and
destination can differ on the setting of "multiple-memslots".

Signed-off-by: David Hildenbrand <david@redhat.com>
---
 hw/virtio/virtio-mem-pci.c     |  21 +++
 hw/virtio/virtio-mem.c         | 266 ++++++++++++++++++++++++++++++++-
 include/hw/virtio/virtio-mem.h |  23 ++-
 3 files changed, 306 insertions(+), 4 deletions(-)
diff mbox series

Patch

diff --git a/hw/virtio/virtio-mem-pci.c b/hw/virtio/virtio-mem-pci.c
index c4597e029e..1b4e9a3284 100644
--- a/hw/virtio/virtio-mem-pci.c
+++ b/hw/virtio/virtio-mem-pci.c
@@ -48,6 +48,25 @@  static MemoryRegion *virtio_mem_pci_get_memory_region(MemoryDeviceState *md,
     return vmc->get_memory_region(vmem, errp);
 }
 
+static void virtio_mem_pci_decide_memslots(MemoryDeviceState *md,
+                                           unsigned int limit)
+{
+    VirtIOMEMPCI *pci_mem = VIRTIO_MEM_PCI(md);
+    VirtIOMEM *vmem = VIRTIO_MEM(&pci_mem->vdev);
+    VirtIOMEMClass *vmc = VIRTIO_MEM_GET_CLASS(vmem);
+
+    vmc->decide_memslots(vmem, limit);
+}
+
+static unsigned int virtio_mem_pci_get_memslots(MemoryDeviceState *md)
+{
+    VirtIOMEMPCI *pci_mem = VIRTIO_MEM_PCI(md);
+    VirtIOMEM *vmem = VIRTIO_MEM(&pci_mem->vdev);
+    VirtIOMEMClass *vmc = VIRTIO_MEM_GET_CLASS(vmem);
+
+    return vmc->get_memslots(vmem);
+}
+
 static uint64_t virtio_mem_pci_get_plugged_size(const MemoryDeviceState *md,
                                                 Error **errp)
 {
@@ -150,6 +169,8 @@  static void virtio_mem_pci_class_init(ObjectClass *klass, void *data)
     mdc->set_addr = virtio_mem_pci_set_addr;
     mdc->get_plugged_size = virtio_mem_pci_get_plugged_size;
     mdc->get_memory_region = virtio_mem_pci_get_memory_region;
+    mdc->decide_memslots = virtio_mem_pci_decide_memslots;
+    mdc->get_memslots = virtio_mem_pci_get_memslots;
     mdc->fill_device_info = virtio_mem_pci_fill_device_info;
     mdc->get_min_alignment = virtio_mem_pci_get_min_alignment;
 
diff --git a/hw/virtio/virtio-mem.c b/hw/virtio/virtio-mem.c
index b6e781741e..724fcb189a 100644
--- a/hw/virtio/virtio-mem.c
+++ b/hw/virtio/virtio-mem.c
@@ -66,6 +66,13 @@  static uint32_t virtio_mem_default_thp_size(void)
     return default_thp_size;
 }
 
+/*
+ * The minimum memslot size depends on this setting ("sane default"), the
+ * device block size, and the memory backend page size. The last (or single)
+ * memslot might be smaller than this constant.
+ */
+#define VIRTIO_MEM_MIN_MEMSLOT_SIZE (1 * GiB)
+
 /*
  * We want to have a reasonable default block size such that
  * 1. We avoid splitting THPs when unplugging memory, which degrades
@@ -483,6 +490,94 @@  static bool virtio_mem_valid_range(const VirtIOMEM *vmem, uint64_t gpa,
     return true;
 }
 
+static void virtio_mem_activate_memslot(VirtIOMEM *vmem, unsigned int idx)
+{
+    const uint64_t memslot_offset = idx * vmem->memslot_size;
+
+    /*
+     * Instead of enabling/disabling memslot, we add/remove them. This should
+     * make address space updates faster, because we don't have to loop over
+     * many disabled subregions.
+     */
+    if (memory_region_is_mapped(&vmem->memslots[idx])) {
+        return;
+    }
+    memory_region_add_subregion(vmem->mr, memslot_offset, &vmem->memslots[idx]);
+}
+
+static void virtio_mem_deactivate_memslot(VirtIOMEM *vmem, unsigned int idx)
+{
+    if (!memory_region_is_mapped(&vmem->memslots[idx])) {
+        return;
+    }
+    memory_region_del_subregion(vmem->mr, &vmem->memslots[idx]);
+}
+
+static void virtio_mem_activate_memslots_to_plug(VirtIOMEM *vmem,
+                                                 uint64_t offset, uint64_t size)
+{
+    const unsigned int start_idx = offset / vmem->memslot_size;
+    const unsigned int end_idx = (offset + size + vmem->memslot_size - 1) /
+                                 vmem->memslot_size;
+    unsigned int idx;
+
+    if (vmem->unplugged_inaccessible == ON_OFF_AUTO_OFF) {
+        /* All memslots covered by the usable region are always enabled. */
+        return;
+    }
+
+    /* Activate all involved memslots in a single transaction. */
+    memory_region_transaction_begin();
+    for (idx = start_idx; idx < end_idx; idx++) {
+        virtio_mem_activate_memslot(vmem, idx);
+    }
+    memory_region_transaction_commit();
+}
+
+static void virtio_mem_deactivate_unplugged_memslots(VirtIOMEM *vmem,
+                                                     uint64_t offset,
+                                                     uint64_t size)
+{
+    const uint64_t region_size = memory_region_size(&vmem->memdev->mr);
+    const unsigned int start_idx = offset / vmem->memslot_size;
+    const unsigned int end_idx = (offset + size + vmem->memslot_size - 1) /
+                                 vmem->memslot_size;
+    unsigned int idx;
+
+    if (vmem->unplugged_inaccessible == ON_OFF_AUTO_OFF) {
+        /* All memslots covered by the usable region are always enabled. */
+        return;
+    }
+
+    /* Deactivate all memslots with unplugged blocks in a single transaction. */
+    memory_region_transaction_begin();
+    for (idx = start_idx; idx < end_idx; idx++) {
+        const uint64_t memslot_offset = idx * vmem->memslot_size;
+        uint64_t memslot_size = vmem->memslot_size;
+
+        /* The size of the last memslot might be smaller. */
+        if (idx == vmem->nb_memslots - 1) {
+            memslot_size = region_size - memslot_offset;
+        }
+
+        /*
+         * Partially covered memslots might still have some blocks plugged and
+         * have to remain enabled if that's the case.
+         */
+        if (offset > memslot_offset ||
+            offset + size < memslot_offset + memslot_size) {
+            const uint64_t gpa = vmem->addr + memslot_offset;
+
+            if (!virtio_mem_is_range_unplugged(vmem, gpa, memslot_size)) {
+                continue;
+            }
+        }
+
+        virtio_mem_deactivate_memslot(vmem, idx);
+    }
+    memory_region_transaction_commit();
+}
+
 static int virtio_mem_set_block_state(VirtIOMEM *vmem, uint64_t start_gpa,
                                       uint64_t size, bool plug)
 {
@@ -500,6 +595,8 @@  static int virtio_mem_set_block_state(VirtIOMEM *vmem, uint64_t start_gpa,
         }
         virtio_mem_notify_unplug(vmem, offset, size);
         virtio_mem_set_range_unplugged(vmem, start_gpa, size);
+        /* Disable completely unplugged memslots after updating the state. */
+        virtio_mem_deactivate_unplugged_memslots(vmem, offset, size);
         return 0;
     }
 
@@ -527,7 +624,20 @@  static int virtio_mem_set_block_state(VirtIOMEM *vmem, uint64_t start_gpa,
     }
 
     if (!ret) {
+        /*
+         * Activate before notifying and rollback in case of any errors.
+         *
+         * When enabling a yet disabled memslot, memory notifiers will get
+         * notified about the added memory region and can register with the
+         * RamDiscardManager; this will traverse all plugged blocks and skip the
+         * blocks we are plugging here. The following notification will inform
+         * registered listeners about the blocks we're plugging.
+         */
+        virtio_mem_activate_memslots_to_plug(vmem, offset, size);
         ret = virtio_mem_notify_plug(vmem, offset, size);
+        if (ret) {
+            virtio_mem_deactivate_unplugged_memslots(vmem, offset, size);
+        }
     }
     if (ret) {
         /* Could be preallocation or a notifier populated memory. */
@@ -602,6 +712,7 @@  static void virtio_mem_resize_usable_region(VirtIOMEM *vmem,
 {
     uint64_t newsize = MIN(memory_region_size(&vmem->memdev->mr),
                            requested_size + VIRTIO_MEM_USABLE_EXTENT);
+    unsigned int idx;
 
     /* The usable region size always has to be multiples of the block size. */
     newsize = QEMU_ALIGN_UP(newsize, vmem->block_size);
@@ -616,12 +727,33 @@  static void virtio_mem_resize_usable_region(VirtIOMEM *vmem,
 
     trace_virtio_mem_resized_usable_region(vmem->usable_region_size, newsize);
     vmem->usable_region_size = newsize;
+
+    if (vmem->unplugged_inaccessible == ON_OFF_AUTO_OFF) {
+        /*
+         * Activate all memslots covered by the usable region and deactivate the
+         * remaining ones in a single transaction.
+         */
+        memory_region_transaction_begin();
+        for (idx = 0; idx < vmem->nb_memslots; idx++) {
+            if (vmem->memslot_size * idx < vmem->usable_region_size) {
+                virtio_mem_activate_memslot(vmem, idx);
+            } else {
+                virtio_mem_deactivate_memslot(vmem, idx);
+            }
+        }
+        memory_region_transaction_commit();
+    }
 }
 
 static int virtio_mem_unplug_all(VirtIOMEM *vmem)
 {
+    const uint64_t region_size = memory_region_size(&vmem->memdev->mr);
     RAMBlock *rb = vmem->memdev->mr.ram_block;
 
+    if (virtio_mem_is_busy()) {
+        return -EBUSY;
+    }
+
     if (vmem->size) {
         if (virtio_mem_is_busy()) {
             return -EBUSY;
@@ -634,6 +766,9 @@  static int virtio_mem_unplug_all(VirtIOMEM *vmem)
         bitmap_clear(vmem->bitmap, 0, vmem->bitmap_size);
         vmem->size = 0;
         notifier_list_notify(&vmem->size_change_notifiers, &vmem->size);
+
+        /* Deactivate all memslots after updating the state. */
+        virtio_mem_deactivate_unplugged_memslots(vmem, 0, region_size);
     }
 
     trace_virtio_mem_unplugged_all();
@@ -790,6 +925,43 @@  static void virtio_mem_system_reset(void *opaque)
     virtio_mem_unplug_all(vmem);
 }
 
+static void virtio_mem_prepare_mr(VirtIOMEM *vmem)
+{
+    const uint64_t region_size = memory_region_size(&vmem->memdev->mr);
+
+    g_assert(!vmem->mr);
+    vmem->mr = g_new0(MemoryRegion, 1);
+    memory_region_init(vmem->mr, OBJECT(vmem), "virtio-mem",
+                       region_size);
+    vmem->mr->align = memory_region_get_alignment(&vmem->memdev->mr);
+}
+
+static void virtio_mem_prepare_memslots(VirtIOMEM *vmem)
+{
+    const uint64_t region_size = memory_region_size(&vmem->memdev->mr);
+    unsigned int idx;
+
+    g_assert(!vmem->memslots && vmem->nb_memslots);
+    vmem->memslots = g_new0(MemoryRegion, vmem->nb_memslots);
+
+    /* Initialize our memslots, but don't map them yet. */
+    for (idx = 0; idx < vmem->nb_memslots; idx++) {
+        const uint64_t memslot_offset = idx * vmem->memslot_size;
+        uint64_t memslot_size = vmem->memslot_size;
+        char name[20];
+
+        /* The size of the last memslot might be smaller. */
+        if (idx == vmem->nb_memslots - 1) {
+            memslot_size = region_size - memslot_offset;
+        }
+
+        snprintf(name, sizeof(name), "memslot-%u", idx);
+        memory_region_init_alias(&vmem->memslots[idx], OBJECT(vmem), name,
+                                 &vmem->memdev->mr, memslot_offset,
+                                 memslot_size);
+    }
+}
+
 static void virtio_mem_device_realize(DeviceState *dev, Error **errp)
 {
     MachineState *ms = MACHINE(qdev_get_machine());
@@ -921,8 +1093,6 @@  static void virtio_mem_device_realize(DeviceState *dev, Error **errp)
         }
     }
 
-    virtio_mem_resize_usable_region(vmem, vmem->requested_size, true);
-
     vmem->bitmap_size = memory_region_size(&vmem->memdev->mr) /
                         vmem->block_size;
     vmem->bitmap = bitmap_new(vmem->bitmap_size);
@@ -930,6 +1100,18 @@  static void virtio_mem_device_realize(DeviceState *dev, Error **errp)
     virtio_init(vdev, VIRTIO_ID_MEM, sizeof(struct virtio_mem_config));
     vmem->vq = virtio_add_queue(vdev, 128, virtio_mem_handle_request);
 
+    if (!vmem->mr) {
+        virtio_mem_prepare_mr(vmem);
+    }
+    if (!vmem->nb_memslots || vmem->nb_memslots == 1) {
+        vmem->nb_memslots = 1;
+        vmem->memslot_size = memory_region_size(&vmem->memdev->mr);
+    }
+    if (!vmem->memslots) {
+        virtio_mem_prepare_memslots(vmem);
+    }
+
+    virtio_mem_resize_usable_region(vmem, vmem->requested_size, true);
     host_memory_backend_set_mapped(vmem->memdev, true);
     vmstate_register_ram(&vmem->memdev->mr, DEVICE(vmem));
     if (vmem->early_migration) {
@@ -963,6 +1145,7 @@  static void virtio_mem_device_unrealize(DeviceState *dev)
     }
     vmstate_unregister_ram(&vmem->memdev->mr, DEVICE(vmem));
     host_memory_backend_set_mapped(vmem->memdev, false);
+    virtio_mem_resize_usable_region(vmem, 0, true);
     virtio_del_queue(vdev, 0);
     virtio_cleanup(vdev);
     g_free(vmem->bitmap);
@@ -1235,9 +1418,66 @@  static MemoryRegion *virtio_mem_get_memory_region(VirtIOMEM *vmem, Error **errp)
     if (!vmem->memdev) {
         error_setg(errp, "'%s' property must be set", VIRTIO_MEM_MEMDEV_PROP);
         return NULL;
+    } else if (!vmem->mr) {
+        virtio_mem_prepare_mr(vmem);
     }
 
-    return &vmem->memdev->mr;
+    return vmem->mr;
+}
+
+static void virtio_mem_decide_memslots(VirtIOMEM *vmem, unsigned int limit)
+{
+    uint64_t region_size, memslot_size, min_memslot_size;
+    unsigned int memslots;
+    RAMBlock *rb;
+
+    /* We're called exactly once, before realizing the device. */
+    g_assert(!vmem->nb_memslots);
+
+    /* If realizing the device will fail, just assume a single memslot. */
+    if (limit <= 1 || !vmem->multiple_memslots || !vmem->memdev ||
+        !vmem->memdev->mr.ram_block) {
+        vmem->nb_memslots = 1;
+        return;
+    }
+
+    rb = vmem->memdev->mr.ram_block;
+    region_size = memory_region_size(&vmem->memdev->mr);
+
+    /*
+     * Determine the default block size now, to determine the minimum memslot
+     * size. We want the minimum slot size to be at least the device block size.
+     */
+    if (!vmem->block_size) {
+        vmem->block_size = virtio_mem_default_block_size(rb);
+    }
+    /* If realizing the device will fail, just assume a single memslot. */
+    if (vmem->block_size < qemu_ram_pagesize(rb) ||
+        !QEMU_IS_ALIGNED(region_size, vmem->block_size)) {
+        vmem->nb_memslots = 1;
+        return;
+    }
+
+    /*
+     * All memslots except the last one have a reasonable minimum size, and
+     * and all memslot sizes are aligned to the device block size.
+     */
+    memslot_size = QEMU_ALIGN_UP(region_size / limit, vmem->block_size);
+    min_memslot_size = MAX(vmem->block_size, VIRTIO_MEM_MIN_MEMSLOT_SIZE);
+    memslot_size = MAX(memslot_size, min_memslot_size);
+
+    memslots = QEMU_ALIGN_UP(region_size, memslot_size) / memslot_size;
+    if (memslots != 1) {
+        vmem->memslot_size = memslot_size;
+    }
+    vmem->nb_memslots = memslots;
+}
+
+static unsigned int virtio_mem_get_memslots(VirtIOMEM *vmem)
+{
+    /* We're called after instructed to make a decision. */
+    g_assert(vmem->nb_memslots);
+    return vmem->nb_memslots;
 }
 
 static void virtio_mem_add_size_change_notifier(VirtIOMEM *vmem,
@@ -1377,6 +1617,21 @@  static void virtio_mem_instance_init(Object *obj)
                         NULL, NULL);
 }
 
+static void virtio_mem_instance_finalize(Object *obj)
+{
+    VirtIOMEM *vmem = VIRTIO_MEM(obj);
+
+    /*
+     * Note: the core already dropped the references on all memory regions
+     * (it's passed as the owner to memory_region_init_*()) and finalized
+     * these objects. We can simply free the memory.
+     */
+    g_free(vmem->memslots);
+    vmem->memslots = NULL;
+    g_free(vmem->mr);
+    vmem->mr = NULL;
+}
+
 static Property virtio_mem_properties[] = {
     DEFINE_PROP_UINT64(VIRTIO_MEM_ADDR_PROP, VirtIOMEM, addr, 0),
     DEFINE_PROP_UINT32(VIRTIO_MEM_NODE_PROP, VirtIOMEM, node, 0),
@@ -1389,6 +1644,8 @@  static Property virtio_mem_properties[] = {
 #endif
     DEFINE_PROP_BOOL(VIRTIO_MEM_EARLY_MIGRATION_PROP, VirtIOMEM,
                      early_migration, true),
+    DEFINE_PROP_BOOL(VIRTIO_MEM_MULTIPLE_MEMSLOTS_PROP, VirtIOMEM,
+                     multiple_memslots, false),
     DEFINE_PROP_END_OF_LIST(),
 };
 
@@ -1556,6 +1813,8 @@  static void virtio_mem_class_init(ObjectClass *klass, void *data)
 
     vmc->fill_device_info = virtio_mem_fill_device_info;
     vmc->get_memory_region = virtio_mem_get_memory_region;
+    vmc->decide_memslots = virtio_mem_decide_memslots;
+    vmc->get_memslots = virtio_mem_get_memslots;
     vmc->add_size_change_notifier = virtio_mem_add_size_change_notifier;
     vmc->remove_size_change_notifier = virtio_mem_remove_size_change_notifier;
     vmc->unplug_request_check = virtio_mem_unplug_request_check;
@@ -1573,6 +1832,7 @@  static const TypeInfo virtio_mem_info = {
     .parent = TYPE_VIRTIO_DEVICE,
     .instance_size = sizeof(VirtIOMEM),
     .instance_init = virtio_mem_instance_init,
+    .instance_finalize = virtio_mem_instance_finalize,
     .class_init = virtio_mem_class_init,
     .class_size = sizeof(VirtIOMEMClass),
     .interfaces = (InterfaceInfo[]) {
diff --git a/include/hw/virtio/virtio-mem.h b/include/hw/virtio/virtio-mem.h
index ab0fe2b4f2..70096957db 100644
--- a/include/hw/virtio/virtio-mem.h
+++ b/include/hw/virtio/virtio-mem.h
@@ -33,6 +33,7 @@  OBJECT_DECLARE_TYPE(VirtIOMEM, VirtIOMEMClass,
 #define VIRTIO_MEM_UNPLUGGED_INACCESSIBLE_PROP "unplugged-inaccessible"
 #define VIRTIO_MEM_EARLY_MIGRATION_PROP "x-early-migration"
 #define VIRTIO_MEM_PREALLOC_PROP "prealloc"
+#define VIRTIO_MEM_MULTIPLE_MEMSLOTS_PROP "multiple-memslots"
 
 struct VirtIOMEM {
     VirtIODevice parent_obj;
@@ -44,7 +45,22 @@  struct VirtIOMEM {
     int32_t bitmap_size;
     unsigned long *bitmap;
 
-    /* assigned memory backend and memory region */
+    /* Device memory region in which we map the individual memslots. */
+    MemoryRegion *mr;
+
+    /* The individual memslots (aliases into the memory backend). */
+    MemoryRegion *memslots;
+
+    /* The total number of memslots. */
+    uint16_t nb_memslots;
+
+    /* Size of one memslot (the last one can be smaller). */
+    uint64_t memslot_size;
+
+    /*
+     * Assigned memory backend with the RAM memory region we split into
+     * memslots, to map the individual memslots only on demand.
+     */
     HostMemoryBackend *memdev;
 
     /* NUMA node */
@@ -82,6 +98,9 @@  struct VirtIOMEM {
      */
     bool early_migration;
 
+    /* Whether we may use multiple memslots instead of only a single one. */
+    bool multiple_memslots;
+
     /* notifiers to notify when "size" changes */
     NotifierList size_change_notifiers;
 
@@ -96,6 +115,8 @@  struct VirtIOMEMClass {
     /* public */
     void (*fill_device_info)(const VirtIOMEM *vmen, VirtioMEMDeviceInfo *vi);
     MemoryRegion *(*get_memory_region)(VirtIOMEM *vmem, Error **errp);
+    void (*decide_memslots)(VirtIOMEM *vmem, unsigned int limit);
+    unsigned int (*get_memslots)(VirtIOMEM *vmem);
     void (*add_size_change_notifier)(VirtIOMEM *vmem, Notifier *notifier);
     void (*remove_size_change_notifier)(VirtIOMEM *vmem, Notifier *notifier);
     void (*unplug_request_check)(VirtIOMEM *vmem, Error **errp);