diff mbox series

[v2] s390/vfio-ap: fix sysfs status attribute for AP queue devices

Message ID 20231108201135.351419-1-akrowiak@linux.ibm.com (mailing list archive)
State New, archived
Headers show
Series [v2] s390/vfio-ap: fix sysfs status attribute for AP queue devices | expand

Commit Message

Anthony Krowiak Nov. 8, 2023, 8:11 p.m. UTC
The 'status' attribute for AP queue devices bound to the vfio_ap device
driver displays incorrect status when the mediated device is attached to a
guest, but the queue device is not passed through. In the current
implementation, the status displayed is 'in_use' which is not correct; it
should be 'assigned'. This can happen if one of the queue devices
associated with a given adapter is not bound to the vfio_ap device driver.
For example:

Queues listed in /sys/bus/ap/drivers/vfio_ap:
14.0005
14.0006
14.000d
16.0006
16.000d

Queues listed in /sys/devices/vfio_ap/matrix/$UUID/matrix
14.0005
14.0006
14.000d
16.0005
16.0006
16.000d

Queues listed in /sys/devices/vfio_ap/matrix/$UUID/guest_matrix
14.0005
14.0006
14.000d

The reason no queues for adapter 0x16 are listed in the guest_matrix is
because queue 16.0005 is not bound to the vfio_ap device driver, so no
queue associated with the adapter is passed through to the guest;
therefore, each queue device for adapter 0x16 should display 'assigned'
instead of 'in_use', because those queues are not in use by a guest, but
only assigned to the mediated device.

Let's check the AP configuration for the guest to determine whether a
queue device is passed through before displaying a status of 'in_use'.

Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
Acked-by: Halil Pasic <pasic@linux.ibm.com>
Acked-by: Harald Freudenberger <freude@linux.ibm.com>
---
 drivers/s390/crypto/vfio_ap_ops.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)

Comments

Anthony Krowiak Nov. 8, 2023, 8:21 p.m. UTC | #1
Christian,
Can this be pushed with the Acks by Halil and Harald?

On 11/8/23 15:11, Tony Krowiak wrote:
> The 'status' attribute for AP queue devices bound to the vfio_ap device
> driver displays incorrect status when the mediated device is attached to a
> guest, but the queue device is not passed through. In the current
> implementation, the status displayed is 'in_use' which is not correct; it
> should be 'assigned'. This can happen if one of the queue devices
> associated with a given adapter is not bound to the vfio_ap device driver.
> For example:
> 
> Queues listed in /sys/bus/ap/drivers/vfio_ap:
> 14.0005
> 14.0006
> 14.000d
> 16.0006
> 16.000d
> 
> Queues listed in /sys/devices/vfio_ap/matrix/$UUID/matrix
> 14.0005
> 14.0006
> 14.000d
> 16.0005
> 16.0006
> 16.000d
> 
> Queues listed in /sys/devices/vfio_ap/matrix/$UUID/guest_matrix
> 14.0005
> 14.0006
> 14.000d
> 
> The reason no queues for adapter 0x16 are listed in the guest_matrix is
> because queue 16.0005 is not bound to the vfio_ap device driver, so no
> queue associated with the adapter is passed through to the guest;
> therefore, each queue device for adapter 0x16 should display 'assigned'
> instead of 'in_use', because those queues are not in use by a guest, but
> only assigned to the mediated device.
> 
> Let's check the AP configuration for the guest to determine whether a
> queue device is passed through before displaying a status of 'in_use'.
> 
> Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
> Acked-by: Halil Pasic <pasic@linux.ibm.com>
> Acked-by: Harald Freudenberger <freude@linux.ibm.com>
> ---
>   drivers/s390/crypto/vfio_ap_ops.c | 16 +++++++++++++++-
>   1 file changed, 15 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/s390/crypto/vfio_ap_ops.c b/drivers/s390/crypto/vfio_ap_ops.c
> index 4db538a55192..6e0a79086656 100644
> --- a/drivers/s390/crypto/vfio_ap_ops.c
> +++ b/drivers/s390/crypto/vfio_ap_ops.c
> @@ -1976,6 +1976,7 @@ static ssize_t status_show(struct device *dev,
>   {
>   	ssize_t nchars = 0;
>   	struct vfio_ap_queue *q;
> +	unsigned long apid, apqi;
>   	struct ap_matrix_mdev *matrix_mdev;
>   	struct ap_device *apdev = to_ap_dev(dev);
>   
> @@ -1983,8 +1984,21 @@ static ssize_t status_show(struct device *dev,
>   	q = dev_get_drvdata(&apdev->device);
>   	matrix_mdev = vfio_ap_mdev_for_queue(q);
>   
> +	/* If the queue is assigned to the matrix mediated device, then
> +	 * determine whether it is passed through to a guest; otherwise,
> +	 * indicate that it is unassigned.
> +	 */
>   	if (matrix_mdev) {
> -		if (matrix_mdev->kvm)
> +		apid = AP_QID_CARD(q->apqn);
> +		apqi = AP_QID_QUEUE(q->apqn);
> +		/*
> +		 * If the queue is passed through to the guest, then indicate
> +		 * that it is in use; otherwise, indicate that it is
> +		 * merely assigned to a matrix mediated device.
> +		 */
> +		if (matrix_mdev->kvm &&
> +		    test_bit_inv(apid, matrix_mdev->shadow_apcb.apm) &&
> +		    test_bit_inv(apqi, matrix_mdev->shadow_apcb.aqm))
>   			nchars = scnprintf(buf, PAGE_SIZE, "%s\n",
>   					   AP_QUEUE_IN_USE);
>   		else
Christian Borntraeger Nov. 20, 2023, 9:16 a.m. UTC | #2
Am 08.11.23 um 21:21 schrieb Tony Krowiak:
> Christian,
> Can this be pushed with the Acks by Halil and Harald?


[...]

>> Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com>
>> Acked-by: Halil Pasic <pasic@linux.ibm.com>
>> Acked-by: Harald Freudenberger <freude@linux.ibm.com>
>> ---
>>   drivers/s390/crypto/vfio_ap_ops.c | 16 +++++++++++++++-
>>   1 file changed, 15 insertions(+), 1 deletion(-)
>>

I think this can go via the s390 tree as well. Alexander do you want to take it?
Alexander Gordeev Nov. 21, 2023, 2:36 p.m. UTC | #3
On Mon, Nov 20, 2023 at 10:16:10AM +0100, Christian Borntraeger wrote:
> I think this can go via the s390 tree as well. Alexander do you want to take it?

Applied, thanks!

I assume, it does not need to wait until the merge window?
Anthony Krowiak Nov. 21, 2023, 10:02 p.m. UTC | #4
On 11/21/23 09:36, Alexander Gordeev wrote:
> On Mon, Nov 20, 2023 at 10:16:10AM +0100, Christian Borntraeger wrote:
>> I think this can go via the s390 tree as well. Alexander do you want to take it?
> 
> Applied, thanks!
> 
> I assume, it does not need to wait until the merge window?

I can't answer that question, but this is not a critical fix as it 
simply fixes an erroneous display of a queue's status via it's sysfs 
status attribute which is reflected in the lszcrypt -V output. The error 
only occurs in a specific instance which is likely rare.
diff mbox series

Patch

diff --git a/drivers/s390/crypto/vfio_ap_ops.c b/drivers/s390/crypto/vfio_ap_ops.c
index 4db538a55192..6e0a79086656 100644
--- a/drivers/s390/crypto/vfio_ap_ops.c
+++ b/drivers/s390/crypto/vfio_ap_ops.c
@@ -1976,6 +1976,7 @@  static ssize_t status_show(struct device *dev,
 {
 	ssize_t nchars = 0;
 	struct vfio_ap_queue *q;
+	unsigned long apid, apqi;
 	struct ap_matrix_mdev *matrix_mdev;
 	struct ap_device *apdev = to_ap_dev(dev);
 
@@ -1983,8 +1984,21 @@  static ssize_t status_show(struct device *dev,
 	q = dev_get_drvdata(&apdev->device);
 	matrix_mdev = vfio_ap_mdev_for_queue(q);
 
+	/* If the queue is assigned to the matrix mediated device, then
+	 * determine whether it is passed through to a guest; otherwise,
+	 * indicate that it is unassigned.
+	 */
 	if (matrix_mdev) {
-		if (matrix_mdev->kvm)
+		apid = AP_QID_CARD(q->apqn);
+		apqi = AP_QID_QUEUE(q->apqn);
+		/*
+		 * If the queue is passed through to the guest, then indicate
+		 * that it is in use; otherwise, indicate that it is
+		 * merely assigned to a matrix mediated device.
+		 */
+		if (matrix_mdev->kvm &&
+		    test_bit_inv(apid, matrix_mdev->shadow_apcb.apm) &&
+		    test_bit_inv(apqi, matrix_mdev->shadow_apcb.aqm))
 			nchars = scnprintf(buf, PAGE_SIZE, "%s\n",
 					   AP_QUEUE_IN_USE);
 		else