| Message ID | 20240404055635.316259-1-lulu@redhat.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | [v3] Documentation: Add reconnect process for VDUSE | expand |
On Thu, Apr 04, 2024 at 01:56:31PM +0800, Cindy Lu wrote: > Add a document explaining the reconnect process, including what the > Userspace App needs to do and how it works with the kernel. > > Signed-off-by: Cindy Lu <lulu@redhat.com> > --- > Documentation/userspace-api/vduse.rst | 41 +++++++++++++++++++++++++++ > 1 file changed, 41 insertions(+) > > diff --git a/Documentation/userspace-api/vduse.rst b/Documentation/userspace-api/vduse.rst > index bdb880e01132..7faa83462e78 100644 > --- a/Documentation/userspace-api/vduse.rst > +++ b/Documentation/userspace-api/vduse.rst > @@ -231,3 +231,44 @@ able to start the dataplane processing as follows: > after the used ring is filled. > > For more details on the uAPI, please see include/uapi/linux/vduse.h. > + > +HOW VDUSE devices reconnection works > +------------------------------------ > +1. What is reconnection? > + > + When the userspace application loads, it should establish a connection > + to the vduse kernel device. Sometimes,the userspace application exists, > + and we want to support its restart and connect to the kernel device again > + > +2. How can I support reconnection in a userspace application? > + > +2.1 During initialization, the userspace application should first verify the > + existence of the device "/dev/vduse/vduse_name". > + If it doesn't exist, it means this is the first-time for connection. goto step 2.2 > + If it exists, it means this is a reconnection, and we should goto step 2.3 > + > +2.2 Create a new VDUSE instance with ioctl(VDUSE_CREATE_DEV) on > + /dev/vduse/control. > + When ioctl(VDUSE_CREATE_DEV) is called, kernel allocates memory for > + the reconnect information. The total memory size is PAGE_SIZE*vq_mumber. Confused. Where is that allocation, in code? Thanks! > +2.3 Check if the information is suitable for reconnect > + If this is reconnection : > + Before attempting to reconnect, The userspace application needs to use the > + ioctl(VDUSE_DEV_GET_CONFIG, VDUSE_DEV_GET_STATUS, VDUSE_DEV_GET_FEATURES...) > + to get the information from kernel. > + Please review the information and confirm if it is suitable to reconnect. > + > +2.4 Userspace application needs to mmap the memory to userspace > + The userspace application requires mapping one page for every vq. These pages > + should be used to save vq-related information during system running. Additionally, > + the application must define its own structure to store information for reconnection. > + > +2.5 Completed the initialization and running the application. > + While the application is running, it is important to store relevant information > + about reconnections in mapped pages. When calling the ioctl VDUSE_VQ_GET_INFO to > + get vq information, it's necessary to check whether it's a reconnection. If it is > + a reconnection, the vq-related information must be get from the mapped pages. > + > +2.6 When the Userspace application exits, it is necessary to unmap all the > + pages for reconnection > -- > 2.43.0
On Mon, Apr 8, 2024 at 3:40 PM Michael S. Tsirkin <mst@redhat.com> wrote: > > On Thu, Apr 04, 2024 at 01:56:31PM +0800, Cindy Lu wrote: > > Add a document explaining the reconnect process, including what the > > Userspace App needs to do and how it works with the kernel. > > > > Signed-off-by: Cindy Lu <lulu@redhat.com> > > --- > > Documentation/userspace-api/vduse.rst | 41 +++++++++++++++++++++++++++ > > 1 file changed, 41 insertions(+) > > > > diff --git a/Documentation/userspace-api/vduse.rst b/Documentation/userspace-api/vduse.rst > > index bdb880e01132..7faa83462e78 100644 > > --- a/Documentation/userspace-api/vduse.rst > > +++ b/Documentation/userspace-api/vduse.rst > > @@ -231,3 +231,44 @@ able to start the dataplane processing as follows: > > after the used ring is filled. > > > > For more details on the uAPI, please see include/uapi/linux/vduse.h. > > + > > +HOW VDUSE devices reconnection works > > +------------------------------------ > > +1. What is reconnection? > > + > > + When the userspace application loads, it should establish a connection > > + to the vduse kernel device. Sometimes,the userspace application exists, > > + and we want to support its restart and connect to the kernel device again > > + > > +2. How can I support reconnection in a userspace application? > > + > > +2.1 During initialization, the userspace application should first verify the > > + existence of the device "/dev/vduse/vduse_name". > > + If it doesn't exist, it means this is the first-time for connection. goto step 2.2 > > + If it exists, it means this is a reconnection, and we should goto step 2.3 > > + > > +2.2 Create a new VDUSE instance with ioctl(VDUSE_CREATE_DEV) on > > + /dev/vduse/control. > > + When ioctl(VDUSE_CREATE_DEV) is called, kernel allocates memory for > > + the reconnect information. The total memory size is PAGE_SIZE*vq_mumber. > > Confused. Where is that allocation, in code? > > Thanks! > this should allocated in function vduse_create_dev(), I will rewrite this part to make it more clearer will send a new version soon Thanks cindy > > +2.3 Check if the information is suitable for reconnect > > + If this is reconnection : > > + Before attempting to reconnect, The userspace application needs to use the > > + ioctl(VDUSE_DEV_GET_CONFIG, VDUSE_DEV_GET_STATUS, VDUSE_DEV_GET_FEATURES...) > > + to get the information from kernel. > > + Please review the information and confirm if it is suitable to reconnect. > > + > > +2.4 Userspace application needs to mmap the memory to userspace > > + The userspace application requires mapping one page for every vq. These pages > > + should be used to save vq-related information during system running. Additionally, > > + the application must define its own structure to store information for reconnection. > > + > > +2.5 Completed the initialization and running the application. > > + While the application is running, it is important to store relevant information > > + about reconnections in mapped pages. When calling the ioctl VDUSE_VQ_GET_INFO to > > + get vq information, it's necessary to check whether it's a reconnection. If it is > > + a reconnection, the vq-related information must be get from the mapped pages. > > + > > +2.6 When the Userspace application exits, it is necessary to unmap all the > > + pages for reconnection > > -- > > 2.43.0 >
On Mon, Apr 08, 2024 at 08:39:21PM +0800, Cindy Lu wrote: > On Mon, Apr 8, 2024 at 3:40 PM Michael S. Tsirkin <mst@redhat.com> wrote: > > > > On Thu, Apr 04, 2024 at 01:56:31PM +0800, Cindy Lu wrote: > > > Add a document explaining the reconnect process, including what the > > > Userspace App needs to do and how it works with the kernel. > > > > > > Signed-off-by: Cindy Lu <lulu@redhat.com> > > > --- > > > Documentation/userspace-api/vduse.rst | 41 +++++++++++++++++++++++++++ > > > 1 file changed, 41 insertions(+) > > > > > > diff --git a/Documentation/userspace-api/vduse.rst b/Documentation/userspace-api/vduse.rst > > > index bdb880e01132..7faa83462e78 100644 > > > --- a/Documentation/userspace-api/vduse.rst > > > +++ b/Documentation/userspace-api/vduse.rst > > > @@ -231,3 +231,44 @@ able to start the dataplane processing as follows: > > > after the used ring is filled. > > > > > > For more details on the uAPI, please see include/uapi/linux/vduse.h. > > > + > > > +HOW VDUSE devices reconnection works > > > +------------------------------------ > > > +1. What is reconnection? > > > + > > > + When the userspace application loads, it should establish a connection > > > + to the vduse kernel device. Sometimes,the userspace application exists, > > > + and we want to support its restart and connect to the kernel device again > > > + > > > +2. How can I support reconnection in a userspace application? > > > + > > > +2.1 During initialization, the userspace application should first verify the > > > + existence of the device "/dev/vduse/vduse_name". > > > + If it doesn't exist, it means this is the first-time for connection. goto step 2.2 > > > + If it exists, it means this is a reconnection, and we should goto step 2.3 > > > + > > > +2.2 Create a new VDUSE instance with ioctl(VDUSE_CREATE_DEV) on > > > + /dev/vduse/control. > > > + When ioctl(VDUSE_CREATE_DEV) is called, kernel allocates memory for > > > + the reconnect information. The total memory size is PAGE_SIZE*vq_mumber. > > > > Confused. Where is that allocation, in code? > > > > Thanks! > > > this should allocated in function vduse_create_dev(), I mean, it's not allocated there ATM right? This is just doc patch to become part of a larger patchset? > I will rewrite > this part to make it more clearer > will send a new version soon > Thanks > cindy > > > > +2.3 Check if the information is suitable for reconnect > > > + If this is reconnection : > > > + Before attempting to reconnect, The userspace application needs to use the > > > + ioctl(VDUSE_DEV_GET_CONFIG, VDUSE_DEV_GET_STATUS, VDUSE_DEV_GET_FEATURES...) > > > + to get the information from kernel. > > > + Please review the information and confirm if it is suitable to reconnect. > > > + > > > +2.4 Userspace application needs to mmap the memory to userspace > > > + The userspace application requires mapping one page for every vq. These pages > > > + should be used to save vq-related information during system running. Additionally, > > > + the application must define its own structure to store information for reconnection. > > > + > > > +2.5 Completed the initialization and running the application. > > > + While the application is running, it is important to store relevant information > > > + about reconnections in mapped pages. When calling the ioctl VDUSE_VQ_GET_INFO to > > > + get vq information, it's necessary to check whether it's a reconnection. If it is > > > + a reconnection, the vq-related information must be get from the mapped pages. > > > + > > > +2.6 When the Userspace application exits, it is necessary to unmap all the > > > + pages for reconnection > > > -- > > > 2.43.0 > >
On Mon, Apr 8, 2024 at 8:50 PM Michael S. Tsirkin <mst@redhat.com> wrote: > > On Mon, Apr 08, 2024 at 08:39:21PM +0800, Cindy Lu wrote: > > On Mon, Apr 8, 2024 at 3:40 PM Michael S. Tsirkin <mst@redhat.com> wrote: > > > > > > On Thu, Apr 04, 2024 at 01:56:31PM +0800, Cindy Lu wrote: > > > > Add a document explaining the reconnect process, including what the > > > > Userspace App needs to do and how it works with the kernel. > > > > > > > > Signed-off-by: Cindy Lu <lulu@redhat.com> > > > > --- > > > > Documentation/userspace-api/vduse.rst | 41 +++++++++++++++++++++++++++ > > > > 1 file changed, 41 insertions(+) > > > > > > > > diff --git a/Documentation/userspace-api/vduse.rst b/Documentation/userspace-api/vduse.rst > > > > index bdb880e01132..7faa83462e78 100644 > > > > --- a/Documentation/userspace-api/vduse.rst > > > > +++ b/Documentation/userspace-api/vduse.rst > > > > @@ -231,3 +231,44 @@ able to start the dataplane processing as follows: > > > > after the used ring is filled. > > > > > > > > For more details on the uAPI, please see include/uapi/linux/vduse.h. > > > > + > > > > +HOW VDUSE devices reconnection works > > > > +------------------------------------ > > > > +1. What is reconnection? > > > > + > > > > + When the userspace application loads, it should establish a connection > > > > + to the vduse kernel device. Sometimes,the userspace application exists, > > > > + and we want to support its restart and connect to the kernel device again > > > > + > > > > +2. How can I support reconnection in a userspace application? > > > > + > > > > +2.1 During initialization, the userspace application should first verify the > > > > + existence of the device "/dev/vduse/vduse_name". > > > > + If it doesn't exist, it means this is the first-time for connection. goto step 2.2 > > > > + If it exists, it means this is a reconnection, and we should goto step 2.3 > > > > + > > > > +2.2 Create a new VDUSE instance with ioctl(VDUSE_CREATE_DEV) on > > > > + /dev/vduse/control. > > > > + When ioctl(VDUSE_CREATE_DEV) is called, kernel allocates memory for > > > > + the reconnect information. The total memory size is PAGE_SIZE*vq_mumber. > > > > > > Confused. Where is that allocation, in code? > > > > > > Thanks! > > > > > this should allocated in function vduse_create_dev(), > > I mean, it's not allocated there ATM right? This is just doc patch > to become part of a larger patchset? > Got it, thanks Michael I will send the whole patchset soon thanks Cindy > > I will rewrite > > this part to make it more clearer > > will send a new version soon > > Thanks > > cindy > > > > > > +2.3 Check if the information is suitable for reconnect > > > > + If this is reconnection : > > > > + Before attempting to reconnect, The userspace application needs to use the > > > > + ioctl(VDUSE_DEV_GET_CONFIG, VDUSE_DEV_GET_STATUS, VDUSE_DEV_GET_FEATURES...) > > > > + to get the information from kernel. > > > > + Please review the information and confirm if it is suitable to reconnect. > > > > + > > > > +2.4 Userspace application needs to mmap the memory to userspace > > > > + The userspace application requires mapping one page for every vq. These pages > > > > + should be used to save vq-related information during system running. Additionally, > > > > + the application must define its own structure to store information for reconnection. > > > > + > > > > +2.5 Completed the initialization and running the application. > > > > + While the application is running, it is important to store relevant information > > > > + about reconnections in mapped pages. When calling the ioctl VDUSE_VQ_GET_INFO to > > > > + get vq information, it's necessary to check whether it's a reconnection. If it is > > > > + a reconnection, the vq-related information must be get from the mapped pages. > > > > + > > > > +2.6 When the Userspace application exits, it is necessary to unmap all the > > > > + pages for reconnection > > > > -- > > > > 2.43.0 > > > >
diff --git a/Documentation/userspace-api/vduse.rst b/Documentation/userspace-api/vduse.rst index bdb880e01132..7faa83462e78 100644 --- a/Documentation/userspace-api/vduse.rst +++ b/Documentation/userspace-api/vduse.rst @@ -231,3 +231,44 @@ able to start the dataplane processing as follows: after the used ring is filled. For more details on the uAPI, please see include/uapi/linux/vduse.h. + +HOW VDUSE devices reconnection works +------------------------------------ +1. What is reconnection? + + When the userspace application loads, it should establish a connection + to the vduse kernel device. Sometimes,the userspace application exists, + and we want to support its restart and connect to the kernel device again + +2. How can I support reconnection in a userspace application? + +2.1 During initialization, the userspace application should first verify the + existence of the device "/dev/vduse/vduse_name". + If it doesn't exist, it means this is the first-time for connection. goto step 2.2 + If it exists, it means this is a reconnection, and we should goto step 2.3 + +2.2 Create a new VDUSE instance with ioctl(VDUSE_CREATE_DEV) on + /dev/vduse/control. + When ioctl(VDUSE_CREATE_DEV) is called, kernel allocates memory for + the reconnect information. The total memory size is PAGE_SIZE*vq_mumber. + +2.3 Check if the information is suitable for reconnect + If this is reconnection : + Before attempting to reconnect, The userspace application needs to use the + ioctl(VDUSE_DEV_GET_CONFIG, VDUSE_DEV_GET_STATUS, VDUSE_DEV_GET_FEATURES...) + to get the information from kernel. + Please review the information and confirm if it is suitable to reconnect. + +2.4 Userspace application needs to mmap the memory to userspace + The userspace application requires mapping one page for every vq. These pages + should be used to save vq-related information during system running. Additionally, + the application must define its own structure to store information for reconnection. + +2.5 Completed the initialization and running the application. + While the application is running, it is important to store relevant information + about reconnections in mapped pages. When calling the ioctl VDUSE_VQ_GET_INFO to + get vq information, it's necessary to check whether it's a reconnection. If it is + a reconnection, the vq-related information must be get from the mapped pages. + +2.6 When the Userspace application exits, it is necessary to unmap all the + pages for reconnection
Add a document explaining the reconnect process, including what the Userspace App needs to do and how it works with the kernel. Signed-off-by: Cindy Lu <lulu@redhat.com> --- Documentation/userspace-api/vduse.rst | 41 +++++++++++++++++++++++++++ 1 file changed, 41 insertions(+)