| Message ID | 20240418193528.41780-4-dwmw2@infradead.org (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | Cleaning up the KVM clock mess | expand |
On 18/04/2024 20:34, David Woodhouse wrote: > From: Jack Allister <jalliste@amazon.com> > > In the common case (where kvm->arch.use_master_clock is true), the KVM > clock is defined as a simple arithmetic function of the guest TSC, based on > a reference point stored in kvm->arch.master_kernel_ns and > kvm->arch.master_cycle_now. > > The existing KVM_[GS]ET_CLOCK functionality does not allow for this > relationship to be precisely saved and restored by userspace. All it can > currently do is set the KVM clock at a given UTC reference time, which is > necessarily imprecise. > > So on live update, the guest TSC can remain cycle accurate at precisely the > same offset from the host TSC, but there is no way for userspace to restore > the KVM clock accurately. > > Even on live migration to a new host, where the accuracy of the guest time- > keeping is fundamentally limited by the accuracy of wallclock > synchronization between the source and destination hosts, the clock jump > experienced by the guest's TSC and its KVM clock should at least be > *consistent*. Even when the guest TSC suffers a discontinuity, its KVM > clock should still remain the *same* arithmetic function of the guest TSC, > and not suffer an *additional* discontinuity. > > To allow for accurate migration of the KVM clock, add per-vCPU ioctls which > save and restore the actual PV clock info in pvclock_vcpu_time_info. > > The restoration in KVM_SET_CLOCK_GUEST works by creating a new reference > point in time just as kvm_update_masterclock() does, and calculating the > corresponding guest TSC value. This guest TSC value is then passed through > the user-provided pvclock structure to generate the *intended* KVM clock > value at that point in time, and through the *actual* KVM clock calculation. > Then kvm->arch.kvmclock_offset is adjusted to eliminate for the difference. > > Where kvm->arch.use_master_clock is false (because the host TSC is > unreliable, or the guest TSCs are configured strangely), the KVM clock > is *not* defined as a function of the guest TSC so KVM_GET_CLOCK_GUEST > returns an error. In this case, as documented, userspace shall use the > legacy KVM_GET_CLOCK ioctl. The loss of precision is acceptable in this > case since the clocks are imprecise in this mode anyway. > > On *restoration*, if kvm->arch.use_master_clock is false, an error is > returned for similar reasons and userspace shall fall back to using > KVM_SET_CLOCK. This does mean that, as documented, userspace needs to use > *both* KVM_GET_CLOCK_GUEST and KVM_GET_CLOCK and send both results with the > migration data (unless the intent is to refuse to resume on a host with bad > TSC). > > (It may have been possible to make KVM_SET_CLOCK_GUEST "good enough" in the > non-masterclock mode, as that mode is necessarily imprecise anyway. The > explicit fallback allows userspace to deliberately fail migration to a host > with misbehaving TSC where master clock mode wouldn't be active.) > > Co-developed-by: David Woodhouse <dwmw@amazon.co.uk> > Signed-off-by: Jack Allister <jalliste@amazon.com> > Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> > CC: Paul Durrant <paul@xen.org> > CC: Dongli Zhang <dongli.zhang@oracle.com> > --- > Documentation/virt/kvm/api.rst | 37 ++++++++ > arch/x86/kvm/x86.c | 156 +++++++++++++++++++++++++++++++++ > include/uapi/linux/kvm.h | 3 + > 3 files changed, 196 insertions(+) > > diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst > index f0b76ff5030d..758f6fc08fe5 100644 > --- a/Documentation/virt/kvm/api.rst > +++ b/Documentation/virt/kvm/api.rst > @@ -6352,6 +6352,43 @@ a single guest_memfd file, but the bound ranges must not overlap). > > See KVM_SET_USER_MEMORY_REGION2 for additional details. > > +4.143 KVM_GET_CLOCK_GUEST > +---------------------------- > + > +:Capability: none > +:Architectures: x86_64 > +:Type: vcpu ioctl > +:Parameters: struct pvclock_vcpu_time_info (out) > +:Returns: 0 on success, <0 on error > + > +Retrieves the current time information structure used for KVM/PV clocks, > +in precisely the form advertised to the guest vCPU, which gives parameters > +for a direct conversion from a guest TSC value to nanoseconds. > + > +When the KVM clock not is in "master clock" mode, for example because the > +host TSC is unreliable or the guest TSCs are oddly configured, the KVM clock > +is actually defined by the host CLOCK_MONOTONIC_RAW instead of the guest TSC. > +In this case, the KVM_GET_CLOCK_GUEST ioctl returns -EINVAL. > + > +4.144 KVM_SET_CLOCK_GUEST > +---------------------------- > + > +:Capability: none > +:Architectures: x86_64 > +:Type: vcpu ioctl > +:Parameters: struct pvclock_vcpu_time_info (in) > +:Returns: 0 on success, <0 on error > + > +Sets the KVM clock (for the whole VM) in terms of the vCPU TSC, using the > +pvclock structure as returned by KVM_GET_CLOCK_GUEST. This allows the precise > +arithmetic relationship between guest TSC and KVM clock to be preserved by > +userspace across migration. > + > +When the KVM clock is not in "master clock" mode, and the KVM clock is actually > +defined by the host CLOCK_MONOTONIC_RAW, this ioctl returns -EINVAL. Userspace > +may choose to set the clock using the less precise KVM_SET_CLOCK ioctl, or may > +choose to fail, denying migration to a host whose TSC is misbehaving. > + > 5. The kvm_run structure > ======================== > > diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c > index 23281c508c27..42abce7b4fc9 100644 > --- a/arch/x86/kvm/x86.c > +++ b/arch/x86/kvm/x86.c > @@ -5868,6 +5868,154 @@ static int kvm_vcpu_ioctl_enable_cap(struct kvm_vcpu *vcpu, > } > } > > +#ifdef CONFIG_X86_64 > +static int kvm_vcpu_ioctl_get_clock_guest(struct kvm_vcpu *v, void __user *argp) > +{ > + struct pvclock_vcpu_time_info *hv_clock = &v->arch.hv_clock; > + > + /* > + * If KVM_REQ_CLOCK_UPDATE is already pending, or if the hv_clock has > + * never been generated at all, call kvm_guest_time_update() to do so. > + * Might as well use the PVCLOCK_TSC_STABLE_BIT as the check for ever > + * having been written. > + */ > + if (kvm_check_request(KVM_REQ_CLOCK_UPDATE, v) || > + !(hv_clock->flags & PVCLOCK_TSC_STABLE_BIT)) { > + if (kvm_guest_time_update(v)) > + return -EINVAL; nit: simple nested if, so you could use && > + } > + > + /* > + * PVCLOCK_TSC_STABLE_BIT is set in use_master_clock mode where the > + * KVM clock is defined in terms of the guest TSC. Otherwise, it is > + * is defined by the host CLOCK_MONOTONIC_RAW, and userspace should > + * use the legacy KVM_[GS]ET_CLOCK to migrate it. > + */ > + if (!(hv_clock->flags & PVCLOCK_TSC_STABLE_BIT)) > + return -EINVAL; > + > + if (copy_to_user(argp, hv_clock, sizeof(*hv_clock))) > + return -EFAULT; > + > + return 0; > +} > + Reviewed-by: Paul Durrant <paul@xen.org>
On Fri, 2024-04-19 at 16:40 +0100, Paul Durrant wrote: > > > + * If KVM_REQ_CLOCK_UPDATE is already pending, or if the > > hv_clock has > > + * never been generated at all, call > > kvm_guest_time_update() to do so. > > + * Might as well use the PVCLOCK_TSC_STABLE_BIT as the > > check for ever > > + * having been written. > > + */ > > + if (kvm_check_request(KVM_REQ_CLOCK_UPDATE, v) || > > + !(hv_clock->flags & PVCLOCK_TSC_STABLE_BIT)) { > > + if (kvm_guest_time_update(v)) > > + return -EINVAL; > > nit: simple nested if, so you could use && Yeah, I frowned at that a bit, and decided I preferred it this way just to highlight the fact that kvm_guest_time_update() is doing a *thing*. And then we bail with -EINVAL if that thing fails. If you stick it all in the if() statement, the code flow is logically the same but it's just a bit less obvious that there are side-effects here in the middle of the conditions, and that those side-effects are actually the *main* point of the statement.
On Thu, Apr 18, 2024 at 9:46 PM David Woodhouse <dwmw2@infradead.org> wrote: > + curr_tsc_hz = get_cpu_tsc_khz() * 1000LL; > + if (unlikely(curr_tsc_hz == 0)) { > + rc = -EINVAL; > + goto out; > + } > + > + if (kvm_caps.has_tsc_control) > + curr_tsc_hz = kvm_scale_tsc(curr_tsc_hz, > + v->arch.l1_tsc_scaling_ratio); > + > + /* > + * The scaling factors in the hv_clock do not depend solely on the > + * TSC frequency *requested* by userspace. They actually use the > + * host TSC frequency that was measured/detected by the host kernel, > + * scaled by kvm_scale_tsc() with the vCPU's l1_tsc_scaling_ratio. > + * So a sanity check that they *precisely* match would have false > + * negatives. Allow for a discrepancy of 1 kHz either way. This is not very clear - if kvm_caps.has_tsc_control, cur_tsc_hz is exactly the "host TSC frequency [...] scaled by kvm_scale_tsc() with the vCPU's l1_tsc_scaling_ratio". But even in that case there is a double rounding issue, I guess. > + /* > + * The call to pvclock_update_vm_gtod_copy() has created a new time > + * reference point in ka->master_cycle_now and ka->master_kernel_ns. > + * > + * Calculate the guest TSC at that moment, and the corresponding KVM > + * clock value according to user_hv_clock. The value according to the > + * current hv_clock will of course be ka->master_kernel_ns since no > + * TSC cycles have elapsed. > + * > + * Adjust ka->kvmclock_offset to the delta, so that both definitions > + * of the clock give precisely the same reading at the reference time. > + */ > + guest_tsc = kvm_read_l1_tsc(v, ka->master_cycle_now); > + user_clk_ns = __pvclock_read_cycles(&user_hv_clock, guest_tsc); > + ka->kvmclock_offset = user_clk_ns - ka->master_kernel_ns; > + > +out: > + kvm_end_pvclock_update(kvm); > + return rc; > +} > +#endif > + > long kvm_arch_vcpu_ioctl(struct file *filp, > unsigned int ioctl, unsigned long arg) > { > @@ -6256,6 +6404,14 @@ long kvm_arch_vcpu_ioctl(struct file *filp, > srcu_read_unlock(&vcpu->kvm->srcu, idx); > break; > } > +#ifdef CONFIG_X86_64 > + case KVM_SET_CLOCK_GUEST: > + r = kvm_vcpu_ioctl_set_clock_guest(vcpu, argp); > + break; > + case KVM_GET_CLOCK_GUEST: > + r = kvm_vcpu_ioctl_get_clock_guest(vcpu, argp); > + break; > +#endif > #ifdef CONFIG_KVM_HYPERV > case KVM_GET_SUPPORTED_HV_CPUID: > r = kvm_ioctl_get_supported_hv_cpuid(vcpu, argp); > diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h > index 2190adbe3002..0d306311e4d6 100644 > --- a/include/uapi/linux/kvm.h > +++ b/include/uapi/linux/kvm.h > @@ -1548,4 +1548,7 @@ struct kvm_create_guest_memfd { > __u64 reserved[6]; > }; > > +#define KVM_SET_CLOCK_GUEST _IOW(KVMIO, 0xd5, struct pvclock_vcpu_time_info) > +#define KVM_GET_CLOCK_GUEST _IOR(KVMIO, 0xd6, struct pvclock_vcpu_time_info) > + > #endif /* __LINUX_KVM_H */ > -- > 2.44.0 > On Thu, Apr 18, 2024 at 9:46 PM David Woodhouse <dwmw2@infradead.org> wrote: > > From: Jack Allister <jalliste@amazon.com> > > In the common case (where kvm->arch.use_master_clock is true), the KVM > clock is defined as a simple arithmetic function of the guest TSC, based on > a reference point stored in kvm->arch.master_kernel_ns and > kvm->arch.master_cycle_now. > > The existing KVM_[GS]ET_CLOCK functionality does not allow for this > relationship to be precisely saved and restored by userspace. All it can > currently do is set the KVM clock at a given UTC reference time, which is > necessarily imprecise. > > So on live update, the guest TSC can remain cycle accurate at precisely the > same offset from the host TSC, but there is no way for userspace to restore > the KVM clock accurately. > > Even on live migration to a new host, where the accuracy of the guest time- > keeping is fundamentally limited by the accuracy of wallclock > synchronization between the source and destination hosts, the clock jump > experienced by the guest's TSC and its KVM clock should at least be > *consistent*. Even when the guest TSC suffers a discontinuity, its KVM > clock should still remain the *same* arithmetic function of the guest TSC, > and not suffer an *additional* discontinuity. > > To allow for accurate migration of the KVM clock, add per-vCPU ioctls which > save and restore the actual PV clock info in pvclock_vcpu_time_info. > > The restoration in KVM_SET_CLOCK_GUEST works by creating a new reference > point in time just as kvm_update_masterclock() does, and calculating the > corresponding guest TSC value. This guest TSC value is then passed through > the user-provided pvclock structure to generate the *intended* KVM clock > value at that point in time, and through the *actual* KVM clock calculation. > Then kvm->arch.kvmclock_offset is adjusted to eliminate for the difference. > > Where kvm->arch.use_master_clock is false (because the host TSC is > unreliable, or the guest TSCs are configured strangely), the KVM clock > is *not* defined as a function of the guest TSC so KVM_GET_CLOCK_GUEST > returns an error. In this case, as documented, userspace shall use the > legacy KVM_GET_CLOCK ioctl. The loss of precision is acceptable in this > case since the clocks are imprecise in this mode anyway. > > On *restoration*, if kvm->arch.use_master_clock is false, an error is > returned for similar reasons and userspace shall fall back to using > KVM_SET_CLOCK. This does mean that, as documented, userspace needs to use > *both* KVM_GET_CLOCK_GUEST and KVM_GET_CLOCK and send both results with the > migration data (unless the intent is to refuse to resume on a host with bad > TSC). > > (It may have been possible to make KVM_SET_CLOCK_GUEST "good enough" in the > non-masterclock mode, as that mode is necessarily imprecise anyway. The > explicit fallback allows userspace to deliberately fail migration to a host > with misbehaving TSC where master clock mode wouldn't be active.) > > Co-developed-by: David Woodhouse <dwmw@amazon.co.uk> > Signed-off-by: Jack Allister <jalliste@amazon.com> > Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> > CC: Paul Durrant <paul@xen.org> > CC: Dongli Zhang <dongli.zhang@oracle.com> > --- > Documentation/virt/kvm/api.rst | 37 ++++++++ > arch/x86/kvm/x86.c | 156 +++++++++++++++++++++++++++++++++ > include/uapi/linux/kvm.h | 3 + > 3 files changed, 196 insertions(+) > > diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst > index f0b76ff5030d..758f6fc08fe5 100644 > --- a/Documentation/virt/kvm/api.rst > +++ b/Documentation/virt/kvm/api.rst > @@ -6352,6 +6352,43 @@ a single guest_memfd file, but the bound ranges must not overlap). > > See KVM_SET_USER_MEMORY_REGION2 for additional details. > > +4.143 KVM_GET_CLOCK_GUEST > +---------------------------- > + > +:Capability: none > +:Architectures: x86_64 > +:Type: vcpu ioctl > +:Parameters: struct pvclock_vcpu_time_info (out) > +:Returns: 0 on success, <0 on error > + > +Retrieves the current time information structure used for KVM/PV clocks, > +in precisely the form advertised to the guest vCPU, which gives parameters > +for a direct conversion from a guest TSC value to nanoseconds. > + > +When the KVM clock not is in "master clock" mode, for example because the > +host TSC is unreliable or the guest TSCs are oddly configured, the KVM clock > +is actually defined by the host CLOCK_MONOTONIC_RAW instead of the guest TSC. > +In this case, the KVM_GET_CLOCK_GUEST ioctl returns -EINVAL. > + > +4.144 KVM_SET_CLOCK_GUEST > +---------------------------- > + > +:Capability: none > +:Architectures: x86_64 > +:Type: vcpu ioctl > +:Parameters: struct pvclock_vcpu_time_info (in) > +:Returns: 0 on success, <0 on error > + > +Sets the KVM clock (for the whole VM) in terms of the vCPU TSC, using the > +pvclock structure as returned by KVM_GET_CLOCK_GUEST. This allows the precise > +arithmetic relationship between guest TSC and KVM clock to be preserved by > +userspace across migration. > + > +When the KVM clock is not in "master clock" mode, and the KVM clock is actually > +defined by the host CLOCK_MONOTONIC_RAW, this ioctl returns -EINVAL. Userspace > +may choose to set the clock using the less precise KVM_SET_CLOCK ioctl, or may > +choose to fail, denying migration to a host whose TSC is misbehaving. > + > 5. The kvm_run structure > ======================== > > diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c > index 23281c508c27..42abce7b4fc9 100644 > --- a/arch/x86/kvm/x86.c > +++ b/arch/x86/kvm/x86.c > @@ -5868,6 +5868,154 @@ static int kvm_vcpu_ioctl_enable_cap(struct kvm_vcpu *vcpu, > } > } > > +#ifdef CONFIG_X86_64 > +static int kvm_vcpu_ioctl_get_clock_guest(struct kvm_vcpu *v, void __user *argp) > +{ > + struct pvclock_vcpu_time_info *hv_clock = &v->arch.hv_clock; > + > + /* > + * If KVM_REQ_CLOCK_UPDATE is already pending, or if the hv_clock has > + * never been generated at all, call kvm_guest_time_update() to do so. > + * Might as well use the PVCLOCK_TSC_STABLE_BIT as the check for ever > + * having been written. > + */ > + if (kvm_check_request(KVM_REQ_CLOCK_UPDATE, v) || > + !(hv_clock->flags & PVCLOCK_TSC_STABLE_BIT)) { > + if (kvm_guest_time_update(v)) > + return -EINVAL; > + } > + > + /* > + * PVCLOCK_TSC_STABLE_BIT is set in use_master_clock mode where the > + * KVM clock is defined in terms of the guest TSC. Otherwise, it is > + * is defined by the host CLOCK_MONOTONIC_RAW, and userspace should > + * use the legacy KVM_[GS]ET_CLOCK to migrate it. > + */ > + if (!(hv_clock->flags & PVCLOCK_TSC_STABLE_BIT)) > + return -EINVAL; > + > + if (copy_to_user(argp, hv_clock, sizeof(*hv_clock))) > + return -EFAULT; > + > + return 0; > +} > + > +/* > + * Reverse the calculation in the hv_clock definition. > + * > + * time_ns = ( (cycles << shift) * mul ) >> 32; > + * (although shift can be negative, so that's bad C) > + * > + * So for a single second, > + * NSEC_PER_SEC = ( ( FREQ_HZ << shift) * mul ) >> 32 > + * NSEC_PER_SEC << 32 = ( FREQ_HZ << shift ) * mul > + * ( NSEC_PER_SEC << 32 ) / mul = FREQ_HZ << shift > + * ( NSEC_PER_SEC << 32 ) / mul ) >> shift = FREQ_HZ > + */ > +static uint64_t hvclock_to_hz(uint32_t mul, int8_t shift) > +{ > + uint64_t tm = NSEC_PER_SEC << 32; > + > + /* Maximise precision. Shift right until the top bit is set */ > + tm <<= 2; > + shift += 2; > + > + /* While 'mul' is even, increase the shift *after* the division */ > + while (!(mul & 1)) { > + shift++; > + mul >>= 1; > + } > + > + tm /= mul; > + > + if (shift > 0) > + return tm >> shift; > + else > + return tm << -shift; > +} > + > +static int kvm_vcpu_ioctl_set_clock_guest(struct kvm_vcpu *v, void __user *argp) > +{ > + struct pvclock_vcpu_time_info user_hv_clock; > + struct kvm *kvm = v->kvm; > + struct kvm_arch *ka = &kvm->arch; > + uint64_t curr_tsc_hz, user_tsc_hz; > + uint64_t user_clk_ns; > + uint64_t guest_tsc; > + int rc = 0; > + > + if (copy_from_user(&user_hv_clock, argp, sizeof(user_hv_clock))) > + return -EFAULT; > + > + if (!user_hv_clock.tsc_to_system_mul) > + return -EINVAL; > + > + user_tsc_hz = hvclock_to_hz(user_hv_clock.tsc_to_system_mul, > + user_hv_clock.tsc_shift); > + > + > + kvm_hv_request_tsc_page_update(kvm); > + kvm_start_pvclock_update(kvm); > + pvclock_update_vm_gtod_copy(kvm); > + > + /* > + * If not in use_master_clock mode, do not allow userspace to set > + * the clock in terms of the guest TSC. Userspace should either > + * fail the migration (to a host with suboptimal TSCs), or should > + * knowingly restore the KVM clock using KVM_SET_CLOCK instead. > + */ > + if (!ka->use_master_clock) { > + rc = -EINVAL; > + goto out; > + } > + > + curr_tsc_hz = get_cpu_tsc_khz() * 1000LL; > + if (unlikely(curr_tsc_hz == 0)) { > + rc = -EINVAL; > + goto out; > + } > + > + if (kvm_caps.has_tsc_control) > + curr_tsc_hz = kvm_scale_tsc(curr_tsc_hz, > + v->arch.l1_tsc_scaling_ratio); > + > + /* > + * The scaling factors in the hv_clock do not depend solely on the > + * TSC frequency *requested* by userspace. They actually use the > + * host TSC frequency that was measured/detected by the host kernel, > + * scaled by kvm_scale_tsc() with the vCPU's l1_tsc_scaling_ratio. > + * > + * So a sanity check that they *precisely* match would have false > + * negatives. Allow for a discrepancy of 1 kHz either way. > + */ > + if (user_tsc_hz < curr_tsc_hz - 1000 || > + user_tsc_hz > curr_tsc_hz + 1000) { > + rc = -ERANGE; > + goto out; > + } > + > + /* > + * The call to pvclock_update_vm_gtod_copy() has created a new time > + * reference point in ka->master_cycle_now and ka->master_kernel_ns. > + * > + * Calculate the guest TSC at that moment, and the corresponding KVM > + * clock value according to user_hv_clock. The value according to the > + * current hv_clock will of course be ka->master_kernel_ns since no > + * TSC cycles have elapsed. > + * > + * Adjust ka->kvmclock_offset to the delta, so that both definitions > + * of the clock give precisely the same reading at the reference time. > + */ > + guest_tsc = kvm_read_l1_tsc(v, ka->master_cycle_now); > + user_clk_ns = __pvclock_read_cycles(&user_hv_clock, guest_tsc); > + ka->kvmclock_offset = user_clk_ns - ka->master_kernel_ns; > + > +out: > + kvm_end_pvclock_update(kvm); > + return rc; > +} > +#endif > + > long kvm_arch_vcpu_ioctl(struct file *filp, > unsigned int ioctl, unsigned long arg) > { > @@ -6256,6 +6404,14 @@ long kvm_arch_vcpu_ioctl(struct file *filp, > srcu_read_unlock(&vcpu->kvm->srcu, idx); > break; > } > +#ifdef CONFIG_X86_64 > + case KVM_SET_CLOCK_GUEST: > + r = kvm_vcpu_ioctl_set_clock_guest(vcpu, argp); > + break; > + case KVM_GET_CLOCK_GUEST: > + r = kvm_vcpu_ioctl_get_clock_guest(vcpu, argp); > + break; > +#endif > #ifdef CONFIG_KVM_HYPERV > case KVM_GET_SUPPORTED_HV_CPUID: > r = kvm_ioctl_get_supported_hv_cpuid(vcpu, argp); > diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h > index 2190adbe3002..0d306311e4d6 100644 > --- a/include/uapi/linux/kvm.h > +++ b/include/uapi/linux/kvm.h > @@ -1548,4 +1548,7 @@ struct kvm_create_guest_memfd { > __u64 reserved[6]; > }; > > +#define KVM_SET_CLOCK_GUEST _IOW(KVMIO, 0xd5, struct pvclock_vcpu_time_info) > +#define KVM_GET_CLOCK_GUEST _IOR(KVMIO, 0xd6, struct pvclock_vcpu_time_info) > + > #endif /* __LINUX_KVM_H */ > -- > 2.44.0 >
On Mon, 2024-04-22 at 16:11 +0200, Paolo Bonzini wrote: > On Thu, Apr 18, 2024 at 9:46 PM David Woodhouse <dwmw2@infradead.org> wrote: > > + curr_tsc_hz = get_cpu_tsc_khz() * 1000LL; > > + if (unlikely(curr_tsc_hz == 0)) { > > + rc = -EINVAL; > > + goto out; > > + } > > + > > + if (kvm_caps.has_tsc_control) > > + curr_tsc_hz = kvm_scale_tsc(curr_tsc_hz, > > + v->arch.l1_tsc_scaling_ratio); > > + > > + /* > > + * The scaling factors in the hv_clock do not depend solely on the > > + * TSC frequency *requested* by userspace. They actually use the > > + * host TSC frequency that was measured/detected by the host kernel, > > + * scaled by kvm_scale_tsc() with the vCPU's l1_tsc_scaling_ratio. > > + * So a sanity check that they *precisely* match would have false > > + * negatives. Allow for a discrepancy of 1 kHz either way. > > This is not very clear - if kvm_caps.has_tsc_control, cur_tsc_hz is > exactly the "host TSC frequency [...] scaled by kvm_scale_tsc() with > the vCPU's l1_tsc_scaling_ratio". But even in that case there is a > double rounding issue, I guess. That's exactly what I'm saying, isn't it? Perhaps the issue is clearer if I say "that was measured/detected by *each* host kernel"? The point is that if I boot on a kernel which measured its TSC against the PIT and came up with a value of 3002MHz, and then migrate to an "identical" host which measured against *its* PIT and decided its TSC frequency was 2999MHz.... then migrate a guest with an explicit TSC frequency of 2500MHz from one host to the other... their effective tsc_to_system_mul and tsc_shift in the pvclock are *different* because... "The scaling factors in the hv_clock do not depend solely on the TSC frequency *requested* by userspace. They actually use the host TSC frequency that was measured/detected by each host kernel, scaled by kvm_scale_tsc() with the vCPU's l1_tsc_scaling_ratio." Or did I misunderstand your objection?
diff --git a/Documentation/virt/kvm/api.rst b/Documentation/virt/kvm/api.rst index f0b76ff5030d..758f6fc08fe5 100644 --- a/Documentation/virt/kvm/api.rst +++ b/Documentation/virt/kvm/api.rst @@ -6352,6 +6352,43 @@ a single guest_memfd file, but the bound ranges must not overlap). See KVM_SET_USER_MEMORY_REGION2 for additional details. +4.143 KVM_GET_CLOCK_GUEST +---------------------------- + +:Capability: none +:Architectures: x86_64 +:Type: vcpu ioctl +:Parameters: struct pvclock_vcpu_time_info (out) +:Returns: 0 on success, <0 on error + +Retrieves the current time information structure used for KVM/PV clocks, +in precisely the form advertised to the guest vCPU, which gives parameters +for a direct conversion from a guest TSC value to nanoseconds. + +When the KVM clock not is in "master clock" mode, for example because the +host TSC is unreliable or the guest TSCs are oddly configured, the KVM clock +is actually defined by the host CLOCK_MONOTONIC_RAW instead of the guest TSC. +In this case, the KVM_GET_CLOCK_GUEST ioctl returns -EINVAL. + +4.144 KVM_SET_CLOCK_GUEST +---------------------------- + +:Capability: none +:Architectures: x86_64 +:Type: vcpu ioctl +:Parameters: struct pvclock_vcpu_time_info (in) +:Returns: 0 on success, <0 on error + +Sets the KVM clock (for the whole VM) in terms of the vCPU TSC, using the +pvclock structure as returned by KVM_GET_CLOCK_GUEST. This allows the precise +arithmetic relationship between guest TSC and KVM clock to be preserved by +userspace across migration. + +When the KVM clock is not in "master clock" mode, and the KVM clock is actually +defined by the host CLOCK_MONOTONIC_RAW, this ioctl returns -EINVAL. Userspace +may choose to set the clock using the less precise KVM_SET_CLOCK ioctl, or may +choose to fail, denying migration to a host whose TSC is misbehaving. + 5. The kvm_run structure ======================== diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c index 23281c508c27..42abce7b4fc9 100644 --- a/arch/x86/kvm/x86.c +++ b/arch/x86/kvm/x86.c @@ -5868,6 +5868,154 @@ static int kvm_vcpu_ioctl_enable_cap(struct kvm_vcpu *vcpu, } } +#ifdef CONFIG_X86_64 +static int kvm_vcpu_ioctl_get_clock_guest(struct kvm_vcpu *v, void __user *argp) +{ + struct pvclock_vcpu_time_info *hv_clock = &v->arch.hv_clock; + + /* + * If KVM_REQ_CLOCK_UPDATE is already pending, or if the hv_clock has + * never been generated at all, call kvm_guest_time_update() to do so. + * Might as well use the PVCLOCK_TSC_STABLE_BIT as the check for ever + * having been written. + */ + if (kvm_check_request(KVM_REQ_CLOCK_UPDATE, v) || + !(hv_clock->flags & PVCLOCK_TSC_STABLE_BIT)) { + if (kvm_guest_time_update(v)) + return -EINVAL; + } + + /* + * PVCLOCK_TSC_STABLE_BIT is set in use_master_clock mode where the + * KVM clock is defined in terms of the guest TSC. Otherwise, it is + * is defined by the host CLOCK_MONOTONIC_RAW, and userspace should + * use the legacy KVM_[GS]ET_CLOCK to migrate it. + */ + if (!(hv_clock->flags & PVCLOCK_TSC_STABLE_BIT)) + return -EINVAL; + + if (copy_to_user(argp, hv_clock, sizeof(*hv_clock))) + return -EFAULT; + + return 0; +} + +/* + * Reverse the calculation in the hv_clock definition. + * + * time_ns = ( (cycles << shift) * mul ) >> 32; + * (although shift can be negative, so that's bad C) + * + * So for a single second, + * NSEC_PER_SEC = ( ( FREQ_HZ << shift) * mul ) >> 32 + * NSEC_PER_SEC << 32 = ( FREQ_HZ << shift ) * mul + * ( NSEC_PER_SEC << 32 ) / mul = FREQ_HZ << shift + * ( NSEC_PER_SEC << 32 ) / mul ) >> shift = FREQ_HZ + */ +static uint64_t hvclock_to_hz(uint32_t mul, int8_t shift) +{ + uint64_t tm = NSEC_PER_SEC << 32; + + /* Maximise precision. Shift right until the top bit is set */ + tm <<= 2; + shift += 2; + + /* While 'mul' is even, increase the shift *after* the division */ + while (!(mul & 1)) { + shift++; + mul >>= 1; + } + + tm /= mul; + + if (shift > 0) + return tm >> shift; + else + return tm << -shift; +} + +static int kvm_vcpu_ioctl_set_clock_guest(struct kvm_vcpu *v, void __user *argp) +{ + struct pvclock_vcpu_time_info user_hv_clock; + struct kvm *kvm = v->kvm; + struct kvm_arch *ka = &kvm->arch; + uint64_t curr_tsc_hz, user_tsc_hz; + uint64_t user_clk_ns; + uint64_t guest_tsc; + int rc = 0; + + if (copy_from_user(&user_hv_clock, argp, sizeof(user_hv_clock))) + return -EFAULT; + + if (!user_hv_clock.tsc_to_system_mul) + return -EINVAL; + + user_tsc_hz = hvclock_to_hz(user_hv_clock.tsc_to_system_mul, + user_hv_clock.tsc_shift); + + + kvm_hv_request_tsc_page_update(kvm); + kvm_start_pvclock_update(kvm); + pvclock_update_vm_gtod_copy(kvm); + + /* + * If not in use_master_clock mode, do not allow userspace to set + * the clock in terms of the guest TSC. Userspace should either + * fail the migration (to a host with suboptimal TSCs), or should + * knowingly restore the KVM clock using KVM_SET_CLOCK instead. + */ + if (!ka->use_master_clock) { + rc = -EINVAL; + goto out; + } + + curr_tsc_hz = get_cpu_tsc_khz() * 1000LL; + if (unlikely(curr_tsc_hz == 0)) { + rc = -EINVAL; + goto out; + } + + if (kvm_caps.has_tsc_control) + curr_tsc_hz = kvm_scale_tsc(curr_tsc_hz, + v->arch.l1_tsc_scaling_ratio); + + /* + * The scaling factors in the hv_clock do not depend solely on the + * TSC frequency *requested* by userspace. They actually use the + * host TSC frequency that was measured/detected by the host kernel, + * scaled by kvm_scale_tsc() with the vCPU's l1_tsc_scaling_ratio. + * + * So a sanity check that they *precisely* match would have false + * negatives. Allow for a discrepancy of 1 kHz either way. + */ + if (user_tsc_hz < curr_tsc_hz - 1000 || + user_tsc_hz > curr_tsc_hz + 1000) { + rc = -ERANGE; + goto out; + } + + /* + * The call to pvclock_update_vm_gtod_copy() has created a new time + * reference point in ka->master_cycle_now and ka->master_kernel_ns. + * + * Calculate the guest TSC at that moment, and the corresponding KVM + * clock value according to user_hv_clock. The value according to the + * current hv_clock will of course be ka->master_kernel_ns since no + * TSC cycles have elapsed. + * + * Adjust ka->kvmclock_offset to the delta, so that both definitions + * of the clock give precisely the same reading at the reference time. + */ + guest_tsc = kvm_read_l1_tsc(v, ka->master_cycle_now); + user_clk_ns = __pvclock_read_cycles(&user_hv_clock, guest_tsc); + ka->kvmclock_offset = user_clk_ns - ka->master_kernel_ns; + +out: + kvm_end_pvclock_update(kvm); + return rc; +} +#endif + long kvm_arch_vcpu_ioctl(struct file *filp, unsigned int ioctl, unsigned long arg) { @@ -6256,6 +6404,14 @@ long kvm_arch_vcpu_ioctl(struct file *filp, srcu_read_unlock(&vcpu->kvm->srcu, idx); break; } +#ifdef CONFIG_X86_64 + case KVM_SET_CLOCK_GUEST: + r = kvm_vcpu_ioctl_set_clock_guest(vcpu, argp); + break; + case KVM_GET_CLOCK_GUEST: + r = kvm_vcpu_ioctl_get_clock_guest(vcpu, argp); + break; +#endif #ifdef CONFIG_KVM_HYPERV case KVM_GET_SUPPORTED_HV_CPUID: r = kvm_ioctl_get_supported_hv_cpuid(vcpu, argp); diff --git a/include/uapi/linux/kvm.h b/include/uapi/linux/kvm.h index 2190adbe3002..0d306311e4d6 100644 --- a/include/uapi/linux/kvm.h +++ b/include/uapi/linux/kvm.h @@ -1548,4 +1548,7 @@ struct kvm_create_guest_memfd { __u64 reserved[6]; }; +#define KVM_SET_CLOCK_GUEST _IOW(KVMIO, 0xd5, struct pvclock_vcpu_time_info) +#define KVM_GET_CLOCK_GUEST _IOR(KVMIO, 0xd6, struct pvclock_vcpu_time_info) + #endif /* __LINUX_KVM_H */