@@ -543,7 +543,6 @@ config X86_EXTENDED_PLATFORM
AMD Elan
RDC R-321x SoC
SGI 320/540 (Visual Workstation)
- STA2X11-based (e.g. Northville)
64-bit platforms (CONFIG_64BIT=y):
Numascale NumaChip
@@ -723,16 +722,6 @@ config X86_RDC321X
as R-8610-(G).
If you don't have one of these chips, you should say N here.
-config X86_32_NON_STANDARD
- bool "Support non-standard 32-bit SMP architectures"
- depends on X86_32 && SMP
- depends on X86_EXTENDED_PLATFORM
- help
- This option compiles in the STA2X11 default
- subarchitecture. It is intended for a generic binary
- kernel. If you select them all, kernel will probe it one by
- one and will fallback to default.
-
# Alphabetically sorted list of Non standard 32 bit platforms
config X86_SUPPORTS_MEMORY_FAILURE
@@ -744,19 +733,6 @@ config X86_SUPPORTS_MEMORY_FAILURE
depends on X86_64 || !SPARSEMEM
select ARCH_SUPPORTS_MEMORY_FAILURE
-config STA2X11
- bool "STA2X11 Companion Chip Support"
- depends on X86_32_NON_STANDARD && PCI
- select SWIOTLB
- select MFD_STA2X11
- select GPIOLIB
- help
- This adds support for boards based on the STA2X11 IO-Hub,
- a.k.a. "ConneXt". The chip is used in place of the standard
- PC chipset, so all "standard" peripherals are missing. If this
- option is selected the kernel will still be able to boot on
- standard PC machines.
-
config X86_32_IRIS
tristate "Eurobraille/Iris poweroff module"
depends on X86_32
@@ -1094,7 +1070,7 @@ config UP_LATE_INIT
config X86_UP_APIC
bool "Local APIC support on uniprocessors" if !PCI_MSI
default PCI_MSI
- depends on X86_32 && !SMP && !X86_32_NON_STANDARD
+ depends on X86_32 && !SMP
help
A local APIC (Advanced Programmable Interrupt Controller) is an
integrated interrupt controller in the CPU. If you have a single-CPU
@@ -1119,7 +1095,7 @@ config X86_UP_IOAPIC
config X86_LOCAL_APIC
def_bool y
- depends on X86_64 || SMP || X86_32_NON_STANDARD || X86_UP_APIC || PCI_MSI
+ depends on X86_64 || SMP || X86_UP_APIC || PCI_MSI
select IRQ_DOMAIN_HIERARCHY
config ACPI_MADT_WAKEUP
@@ -1579,7 +1555,7 @@ config ARCH_FLATMEM_ENABLE
config ARCH_SPARSEMEM_ENABLE
def_bool y
- depends on X86_64 || NUMA || X86_32 || X86_32_NON_STANDARD
+ depends on X86_64 || NUMA || X86_32
select SPARSEMEM_STATIC if X86_32
select SPARSEMEM_VMEMMAP_ENABLE if X86_64
deleted file mode 100644
@@ -1,13 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0 */
-/*
- * Header file for STMicroelectronics ConneXt (STA2X11) IOHub
- */
-#ifndef __ASM_STA2X11_H
-#define __ASM_STA2X11_H
-
-#include <linux/pci.h>
-
-/* This needs to be called from the MFD to configure its sub-devices */
-struct sta2x11_instance *sta2x11_get_instance(struct pci_dev *pdev);
-
-#endif /* __ASM_STA2X11_H */
@@ -12,8 +12,6 @@ obj-$(CONFIG_X86_INTEL_CE) += ce4100.o
obj-$(CONFIG_ACPI) += acpi.o
obj-y += legacy.o irq.o
-obj-$(CONFIG_STA2X11) += sta2x11-fixup.o
-
obj-$(CONFIG_X86_NUMACHIP) += numachip.o
obj-$(CONFIG_X86_INTEL_MID) += intel_mid_pci.o
deleted file mode 100644
@@ -1,233 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * DMA translation between STA2x11 AMBA memory mapping and the x86 memory mapping
- *
- * ST Microelectronics ConneXt (STA2X11/STA2X10)
- *
- * Copyright (c) 2010-2011 Wind River Systems, Inc.
- */
-
-#include <linux/pci.h>
-#include <linux/pci_ids.h>
-#include <linux/export.h>
-#include <linux/list.h>
-#include <linux/dma-map-ops.h>
-#include <linux/swiotlb.h>
-#include <asm/iommu.h>
-#include <asm/sta2x11.h>
-
-#define STA2X11_SWIOTLB_SIZE (4*1024*1024)
-
-/*
- * We build a list of bus numbers that are under the ConneXt. The
- * main bridge hosts 4 busses, which are the 4 endpoints, in order.
- */
-#define STA2X11_NR_EP 4 /* 0..3 included */
-#define STA2X11_NR_FUNCS 8 /* 0..7 included */
-#define STA2X11_AMBA_SIZE (512 << 20)
-
-struct sta2x11_ahb_regs { /* saved during suspend */
- u32 base, pexlbase, pexhbase, crw;
-};
-
-struct sta2x11_mapping {
- int is_suspended;
- struct sta2x11_ahb_regs regs[STA2X11_NR_FUNCS];
-};
-
-struct sta2x11_instance {
- struct list_head list;
- int bus0;
- struct sta2x11_mapping map[STA2X11_NR_EP];
-};
-
-static LIST_HEAD(sta2x11_instance_list);
-
-/* At probe time, record new instances of this bridge (likely one only) */
-static void sta2x11_new_instance(struct pci_dev *pdev)
-{
- struct sta2x11_instance *instance;
-
- instance = kzalloc(sizeof(*instance), GFP_ATOMIC);
- if (!instance)
- return;
- /* This has a subordinate bridge, with 4 more-subordinate ones */
- instance->bus0 = pdev->subordinate->number + 1;
-
- if (list_empty(&sta2x11_instance_list)) {
- int size = STA2X11_SWIOTLB_SIZE;
- /* First instance: register your own swiotlb area */
- dev_info(&pdev->dev, "Using SWIOTLB (size %i)\n", size);
- if (swiotlb_init_late(size, GFP_DMA, NULL))
- dev_emerg(&pdev->dev, "init swiotlb failed\n");
- }
- list_add(&instance->list, &sta2x11_instance_list);
-}
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_STMICRO, 0xcc17, sta2x11_new_instance);
-
-/*
- * Utility functions used in this file from below
- */
-static struct sta2x11_instance *sta2x11_pdev_to_instance(struct pci_dev *pdev)
-{
- struct sta2x11_instance *instance;
- int ep;
-
- list_for_each_entry(instance, &sta2x11_instance_list, list) {
- ep = pdev->bus->number - instance->bus0;
- if (ep >= 0 && ep < STA2X11_NR_EP)
- return instance;
- }
- return NULL;
-}
-
-static int sta2x11_pdev_to_ep(struct pci_dev *pdev)
-{
- struct sta2x11_instance *instance;
-
- instance = sta2x11_pdev_to_instance(pdev);
- if (!instance)
- return -1;
-
- return pdev->bus->number - instance->bus0;
-}
-
-/* This is exported, as some devices need to access the MFD registers */
-struct sta2x11_instance *sta2x11_get_instance(struct pci_dev *pdev)
-{
- return sta2x11_pdev_to_instance(pdev);
-}
-EXPORT_SYMBOL(sta2x11_get_instance);
-
-/* At setup time, we use our own ops if the device is a ConneXt one */
-static void sta2x11_setup_pdev(struct pci_dev *pdev)
-{
- struct sta2x11_instance *instance = sta2x11_pdev_to_instance(pdev);
-
- if (!instance) /* either a sta2x11 bridge or another ST device */
- return;
-
- /* We must enable all devices as master, for audio DMA to work */
- pci_set_master(pdev);
-}
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_STMICRO, PCI_ANY_ID, sta2x11_setup_pdev);
-
-/*
- * At boot we must set up the mappings for the pcie-to-amba bridge.
- * It involves device access, and the same happens at suspend/resume time
- */
-
-#define AHB_MAPB 0xCA4
-#define AHB_CRW(i) (AHB_MAPB + 0 + (i) * 0x10)
-#define AHB_CRW_SZMASK 0xfffffc00UL
-#define AHB_CRW_ENABLE (1 << 0)
-#define AHB_CRW_WTYPE_MEM (2 << 1)
-#define AHB_CRW_ROE (1UL << 3) /* Relax Order Ena */
-#define AHB_CRW_NSE (1UL << 4) /* No Snoop Enable */
-#define AHB_BASE(i) (AHB_MAPB + 4 + (i) * 0x10)
-#define AHB_PEXLBASE(i) (AHB_MAPB + 8 + (i) * 0x10)
-#define AHB_PEXHBASE(i) (AHB_MAPB + 12 + (i) * 0x10)
-
-/* At probe time, enable mapping for each endpoint, using the pdev */
-static void sta2x11_map_ep(struct pci_dev *pdev)
-{
- struct sta2x11_instance *instance = sta2x11_pdev_to_instance(pdev);
- struct device *dev = &pdev->dev;
- u32 amba_base, max_amba_addr;
- int i, ret;
-
- if (!instance)
- return;
-
- pci_read_config_dword(pdev, AHB_BASE(0), &amba_base);
- max_amba_addr = amba_base + STA2X11_AMBA_SIZE - 1;
-
- ret = dma_direct_set_offset(dev, 0, amba_base, STA2X11_AMBA_SIZE);
- if (ret)
- dev_err(dev, "sta2x11: could not set DMA offset\n");
-
- dev->bus_dma_limit = max_amba_addr;
- dma_set_mask_and_coherent(&pdev->dev, max_amba_addr);
-
- /* Configure AHB mapping */
- pci_write_config_dword(pdev, AHB_PEXLBASE(0), 0);
- pci_write_config_dword(pdev, AHB_PEXHBASE(0), 0);
- pci_write_config_dword(pdev, AHB_CRW(0), STA2X11_AMBA_SIZE |
- AHB_CRW_WTYPE_MEM | AHB_CRW_ENABLE);
-
- /* Disable all the other windows */
- for (i = 1; i < STA2X11_NR_FUNCS; i++)
- pci_write_config_dword(pdev, AHB_CRW(i), 0);
-
- dev_info(&pdev->dev,
- "sta2x11: Map EP %i: AMBA address %#8x-%#8x\n",
- sta2x11_pdev_to_ep(pdev), amba_base, max_amba_addr);
-}
-DECLARE_PCI_FIXUP_ENABLE(PCI_VENDOR_ID_STMICRO, PCI_ANY_ID, sta2x11_map_ep);
-
-#ifdef CONFIG_PM /* Some register values must be saved and restored */
-
-static struct sta2x11_mapping *sta2x11_pdev_to_mapping(struct pci_dev *pdev)
-{
- struct sta2x11_instance *instance;
- int ep;
-
- instance = sta2x11_pdev_to_instance(pdev);
- if (!instance)
- return NULL;
- ep = sta2x11_pdev_to_ep(pdev);
- return instance->map + ep;
-}
-
-static void suspend_mapping(struct pci_dev *pdev)
-{
- struct sta2x11_mapping *map = sta2x11_pdev_to_mapping(pdev);
- int i;
-
- if (!map)
- return;
-
- if (map->is_suspended)
- return;
- map->is_suspended = 1;
-
- /* Save all window configs */
- for (i = 0; i < STA2X11_NR_FUNCS; i++) {
- struct sta2x11_ahb_regs *regs = map->regs + i;
-
- pci_read_config_dword(pdev, AHB_BASE(i), ®s->base);
- pci_read_config_dword(pdev, AHB_PEXLBASE(i), ®s->pexlbase);
- pci_read_config_dword(pdev, AHB_PEXHBASE(i), ®s->pexhbase);
- pci_read_config_dword(pdev, AHB_CRW(i), ®s->crw);
- }
-}
-DECLARE_PCI_FIXUP_SUSPEND(PCI_VENDOR_ID_STMICRO, PCI_ANY_ID, suspend_mapping);
-
-static void resume_mapping(struct pci_dev *pdev)
-{
- struct sta2x11_mapping *map = sta2x11_pdev_to_mapping(pdev);
- int i;
-
- if (!map)
- return;
-
-
- if (!map->is_suspended)
- goto out;
- map->is_suspended = 0;
-
- /* Restore all window configs */
- for (i = 0; i < STA2X11_NR_FUNCS; i++) {
- struct sta2x11_ahb_regs *regs = map->regs + i;
-
- pci_write_config_dword(pdev, AHB_BASE(i), regs->base);
- pci_write_config_dword(pdev, AHB_PEXLBASE(i), regs->pexlbase);
- pci_write_config_dword(pdev, AHB_PEXHBASE(i), regs->pexhbase);
- pci_write_config_dword(pdev, AHB_CRW(i), regs->crw);
- }
-out:
- pci_set_master(pdev); /* Like at boot, enable master on all devices */
-}
-DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_STMICRO, PCI_ANY_ID, resume_mapping);
-
-#endif /* CONFIG_PM */