diff mbox

[7/7] ACPI: cpufreq: Remove deprecated /proc/acpi/processor/../performance proc entries

Message ID 1233679606-1971-8-git-send-email-trenn@suse.de (mailing list archive)
State Accepted
Headers show

Commit Message

Thomas Renninger Feb. 3, 2009, 4:46 p.m. UTC
They were long enough set deprecated...

Update Documentation/cpu-freq/users-guide.txt:
The deprecated files listed there seen not to exist for some time anymore
already.

Signed-off-by: Thomas Renninger <trenn@suse.de>
CC: Len Brown <lenb@kernel.org>
CC: Linux ACPI list <linux-acpi@vger.kernel.org>
---
 Documentation/cpu-freq/user-guide.txt |   16 -----
 arch/x86/kernel/cpu/cpufreq/Kconfig   |   11 ----
 drivers/acpi/processor_perflib.c      |  105 ---------------------------------
 3 files changed, 0 insertions(+), 132 deletions(-)

Comments

Len Brown Feb. 4, 2009, 5:13 a.m. UTC | #1
applied

thanks,
--
Len Brown, Intel Open Source Technology Center

On Tue, 3 Feb 2009, Thomas Renninger wrote:

> They were long enough set deprecated...
> 
> Update Documentation/cpu-freq/users-guide.txt:
> The deprecated files listed there seen not to exist for some time anymore
> already.
> 
> Signed-off-by: Thomas Renninger <trenn@suse.de>
> CC: Len Brown <lenb@kernel.org>
> CC: Linux ACPI list <linux-acpi@vger.kernel.org>
> ---
>  Documentation/cpu-freq/user-guide.txt |   16 -----
>  arch/x86/kernel/cpu/cpufreq/Kconfig   |   11 ----
>  drivers/acpi/processor_perflib.c      |  105 ---------------------------------
>  3 files changed, 0 insertions(+), 132 deletions(-)
> 
> diff --git a/Documentation/cpu-freq/user-guide.txt b/Documentation/cpu-freq/user-guide.txt
> index 57f23cb..75f4119 100644
> --- a/Documentation/cpu-freq/user-guide.txt
> +++ b/Documentation/cpu-freq/user-guide.txt
> @@ -207,19 +207,3 @@ scaling_setspeed.		By "echoing" a new frequency into this
>  				you can change the speed of the CPU,
>  				but only within the limits of
>  				scaling_min_freq and scaling_max_freq.
> -				
> -
> -3.2 Deprecated Interfaces
> --------------------------
> -
> -Depending on your kernel configuration, you might find the following 
> -cpufreq-related files:
> -/proc/cpufreq
> -/proc/sys/cpu/*/speed
> -/proc/sys/cpu/*/speed-min
> -/proc/sys/cpu/*/speed-max
> -
> -These are files for deprecated interfaces to cpufreq, which offer far
> -less functionality. Because of this, these interfaces aren't described
> -here.
> -
> diff --git a/arch/x86/kernel/cpu/cpufreq/Kconfig b/arch/x86/kernel/cpu/cpufreq/Kconfig
> index b63b0db..52c8398 100644
> --- a/arch/x86/kernel/cpu/cpufreq/Kconfig
> +++ b/arch/x86/kernel/cpu/cpufreq/Kconfig
> @@ -230,17 +230,6 @@ config X86_E_POWERSAVER
>  
>  comment "shared options"
>  
> -config X86_ACPI_CPUFREQ_PROC_INTF
> -	bool "/proc/acpi/processor/../performance interface (deprecated)"
> -	depends on PROC_FS
> -	depends on X86_ACPI_CPUFREQ || X86_POWERNOW_K7_ACPI || X86_POWERNOW_K8_ACPI
> -	help
> -	  This enables the deprecated /proc/acpi/processor/../performance
> -	  interface. While it is helpful for debugging, the generic,
> -	  cross-architecture cpufreq interfaces should be used.
> -
> -	  If in doubt, say N.
> -
>  config X86_SPEEDSTEP_LIB
>  	tristate
>  	default (X86_SPEEDSTEP_ICH || X86_SPEEDSTEP_SMI || X86_P4_CLOCKMOD)
> diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
> index 846e227..9cc769b 100644
> --- a/drivers/acpi/processor_perflib.c
> +++ b/drivers/acpi/processor_perflib.c
> @@ -31,14 +31,6 @@
>  #include <linux/init.h>
>  #include <linux/cpufreq.h>
>  
> -#ifdef CONFIG_X86_ACPI_CPUFREQ_PROC_INTF
> -#include <linux/proc_fs.h>
> -#include <linux/seq_file.h>
> -#include <linux/mutex.h>
> -
> -#include <asm/uaccess.h>
> -#endif
> -
>  #ifdef CONFIG_X86
>  #include <asm/cpufeature.h>
>  #endif
> @@ -434,96 +426,6 @@ int acpi_processor_notify_smm(struct module *calling_module)
>  
>  EXPORT_SYMBOL(acpi_processor_notify_smm);
>  
> -#ifdef CONFIG_X86_ACPI_CPUFREQ_PROC_INTF
> -/* /proc/acpi/processor/../performance interface (DEPRECATED) */
> -
> -static int acpi_processor_perf_open_fs(struct inode *inode, struct file *file);
> -static struct file_operations acpi_processor_perf_fops = {
> -	.owner = THIS_MODULE,
> -	.open = acpi_processor_perf_open_fs,
> -	.read = seq_read,
> -	.llseek = seq_lseek,
> -	.release = single_release,
> -};
> -
> -static int acpi_processor_perf_seq_show(struct seq_file *seq, void *offset)
> -{
> -	struct acpi_processor *pr = seq->private;
> -	int i;
> -
> -
> -	if (!pr)
> -		goto end;
> -
> -	if (!pr->performance) {
> -		seq_puts(seq, "<not supported>\n");
> -		goto end;
> -	}
> -
> -	seq_printf(seq, "state count:             %d\n"
> -		   "active state:            P%d\n",
> -		   pr->performance->state_count, pr->performance->state);
> -
> -	seq_puts(seq, "states:\n");
> -	for (i = 0; i < pr->performance->state_count; i++)
> -		seq_printf(seq,
> -			   "   %cP%d:                  %d MHz, %d mW, %d uS\n",
> -			   (i == pr->performance->state ? '*' : ' '), i,
> -			   (u32) pr->performance->states[i].core_frequency,
> -			   (u32) pr->performance->states[i].power,
> -			   (u32) pr->performance->states[i].transition_latency);
> -
> -      end:
> -	return 0;
> -}
> -
> -static int acpi_processor_perf_open_fs(struct inode *inode, struct file *file)
> -{
> -	return single_open(file, acpi_processor_perf_seq_show,
> -			   PDE(inode)->data);
> -}
> -
> -static void acpi_cpufreq_add_file(struct acpi_processor *pr)
> -{
> -	struct acpi_device *device = NULL;
> -
> -
> -	if (acpi_bus_get_device(pr->handle, &device))
> -		return;
> -
> -	/* add file 'performance' [R/W] */
> -	proc_create_data(ACPI_PROCESSOR_FILE_PERFORMANCE, S_IFREG | S_IRUGO,
> -			 acpi_device_dir(device),
> -			 &acpi_processor_perf_fops, acpi_driver_data(device));
> -	return;
> -}
> -
> -static void acpi_cpufreq_remove_file(struct acpi_processor *pr)
> -{
> -	struct acpi_device *device = NULL;
> -
> -
> -	if (acpi_bus_get_device(pr->handle, &device))
> -		return;
> -
> -	/* remove file 'performance' */
> -	remove_proc_entry(ACPI_PROCESSOR_FILE_PERFORMANCE,
> -			  acpi_device_dir(device));
> -
> -	return;
> -}
> -
> -#else
> -static void acpi_cpufreq_add_file(struct acpi_processor *pr)
> -{
> -	return;
> -}
> -static void acpi_cpufreq_remove_file(struct acpi_processor *pr)
> -{
> -	return;
> -}
> -#endif				/* CONFIG_X86_ACPI_CPUFREQ_PROC_INTF */
> -
>  static int acpi_processor_get_psd(struct acpi_processor	*pr)
>  {
>  	int result = 0;
> @@ -747,14 +649,12 @@ err_ret:
>  }
>  EXPORT_SYMBOL(acpi_processor_preregister_performance);
>  
> -
>  int
>  acpi_processor_register_performance(struct acpi_processor_performance
>  				    *performance, unsigned int cpu)
>  {
>  	struct acpi_processor *pr;
>  
> -
>  	if (!(acpi_processor_ppc_status & PPC_REGISTERED))
>  		return -EINVAL;
>  
> @@ -781,8 +681,6 @@ acpi_processor_register_performance(struct acpi_processor_performance
>  		return -EIO;
>  	}
>  
> -	acpi_cpufreq_add_file(pr);
> -
>  	mutex_unlock(&performance_mutex);
>  	return 0;
>  }
> @@ -795,7 +693,6 @@ acpi_processor_unregister_performance(struct acpi_processor_performance
>  {
>  	struct acpi_processor *pr;
>  
> -
>  	mutex_lock(&performance_mutex);
>  
>  	pr = per_cpu(processors, cpu);
> @@ -808,8 +705,6 @@ acpi_processor_unregister_performance(struct acpi_processor_performance
>  		kfree(pr->performance->states);
>  	pr->performance = NULL;
>  
> -	acpi_cpufreq_remove_file(pr);
> -
>  	mutex_unlock(&performance_mutex);
>  
>  	return;
> -- 
> 1.6.0.2
> 
--
To unsubscribe from this list: send the line "unsubscribe linux-acpi" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/cpu-freq/user-guide.txt b/Documentation/cpu-freq/user-guide.txt
index 57f23cb..75f4119 100644
--- a/Documentation/cpu-freq/user-guide.txt
+++ b/Documentation/cpu-freq/user-guide.txt
@@ -207,19 +207,3 @@  scaling_setspeed.		By "echoing" a new frequency into this
 				you can change the speed of the CPU,
 				but only within the limits of
 				scaling_min_freq and scaling_max_freq.
-				
-
-3.2 Deprecated Interfaces
--------------------------
-
-Depending on your kernel configuration, you might find the following 
-cpufreq-related files:
-/proc/cpufreq
-/proc/sys/cpu/*/speed
-/proc/sys/cpu/*/speed-min
-/proc/sys/cpu/*/speed-max
-
-These are files for deprecated interfaces to cpufreq, which offer far
-less functionality. Because of this, these interfaces aren't described
-here.
-
diff --git a/arch/x86/kernel/cpu/cpufreq/Kconfig b/arch/x86/kernel/cpu/cpufreq/Kconfig
index b63b0db..52c8398 100644
--- a/arch/x86/kernel/cpu/cpufreq/Kconfig
+++ b/arch/x86/kernel/cpu/cpufreq/Kconfig
@@ -230,17 +230,6 @@  config X86_E_POWERSAVER
 
 comment "shared options"
 
-config X86_ACPI_CPUFREQ_PROC_INTF
-	bool "/proc/acpi/processor/../performance interface (deprecated)"
-	depends on PROC_FS
-	depends on X86_ACPI_CPUFREQ || X86_POWERNOW_K7_ACPI || X86_POWERNOW_K8_ACPI
-	help
-	  This enables the deprecated /proc/acpi/processor/../performance
-	  interface. While it is helpful for debugging, the generic,
-	  cross-architecture cpufreq interfaces should be used.
-
-	  If in doubt, say N.
-
 config X86_SPEEDSTEP_LIB
 	tristate
 	default (X86_SPEEDSTEP_ICH || X86_SPEEDSTEP_SMI || X86_P4_CLOCKMOD)
diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c
index 846e227..9cc769b 100644
--- a/drivers/acpi/processor_perflib.c
+++ b/drivers/acpi/processor_perflib.c
@@ -31,14 +31,6 @@ 
 #include <linux/init.h>
 #include <linux/cpufreq.h>
 
-#ifdef CONFIG_X86_ACPI_CPUFREQ_PROC_INTF
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/mutex.h>
-
-#include <asm/uaccess.h>
-#endif
-
 #ifdef CONFIG_X86
 #include <asm/cpufeature.h>
 #endif
@@ -434,96 +426,6 @@  int acpi_processor_notify_smm(struct module *calling_module)
 
 EXPORT_SYMBOL(acpi_processor_notify_smm);
 
-#ifdef CONFIG_X86_ACPI_CPUFREQ_PROC_INTF
-/* /proc/acpi/processor/../performance interface (DEPRECATED) */
-
-static int acpi_processor_perf_open_fs(struct inode *inode, struct file *file);
-static struct file_operations acpi_processor_perf_fops = {
-	.owner = THIS_MODULE,
-	.open = acpi_processor_perf_open_fs,
-	.read = seq_read,
-	.llseek = seq_lseek,
-	.release = single_release,
-};
-
-static int acpi_processor_perf_seq_show(struct seq_file *seq, void *offset)
-{
-	struct acpi_processor *pr = seq->private;
-	int i;
-
-
-	if (!pr)
-		goto end;
-
-	if (!pr->performance) {
-		seq_puts(seq, "<not supported>\n");
-		goto end;
-	}
-
-	seq_printf(seq, "state count:             %d\n"
-		   "active state:            P%d\n",
-		   pr->performance->state_count, pr->performance->state);
-
-	seq_puts(seq, "states:\n");
-	for (i = 0; i < pr->performance->state_count; i++)
-		seq_printf(seq,
-			   "   %cP%d:                  %d MHz, %d mW, %d uS\n",
-			   (i == pr->performance->state ? '*' : ' '), i,
-			   (u32) pr->performance->states[i].core_frequency,
-			   (u32) pr->performance->states[i].power,
-			   (u32) pr->performance->states[i].transition_latency);
-
-      end:
-	return 0;
-}
-
-static int acpi_processor_perf_open_fs(struct inode *inode, struct file *file)
-{
-	return single_open(file, acpi_processor_perf_seq_show,
-			   PDE(inode)->data);
-}
-
-static void acpi_cpufreq_add_file(struct acpi_processor *pr)
-{
-	struct acpi_device *device = NULL;
-
-
-	if (acpi_bus_get_device(pr->handle, &device))
-		return;
-
-	/* add file 'performance' [R/W] */
-	proc_create_data(ACPI_PROCESSOR_FILE_PERFORMANCE, S_IFREG | S_IRUGO,
-			 acpi_device_dir(device),
-			 &acpi_processor_perf_fops, acpi_driver_data(device));
-	return;
-}
-
-static void acpi_cpufreq_remove_file(struct acpi_processor *pr)
-{
-	struct acpi_device *device = NULL;
-
-
-	if (acpi_bus_get_device(pr->handle, &device))
-		return;
-
-	/* remove file 'performance' */
-	remove_proc_entry(ACPI_PROCESSOR_FILE_PERFORMANCE,
-			  acpi_device_dir(device));
-
-	return;
-}
-
-#else
-static void acpi_cpufreq_add_file(struct acpi_processor *pr)
-{
-	return;
-}
-static void acpi_cpufreq_remove_file(struct acpi_processor *pr)
-{
-	return;
-}
-#endif				/* CONFIG_X86_ACPI_CPUFREQ_PROC_INTF */
-
 static int acpi_processor_get_psd(struct acpi_processor	*pr)
 {
 	int result = 0;
@@ -747,14 +649,12 @@  err_ret:
 }
 EXPORT_SYMBOL(acpi_processor_preregister_performance);
 
-
 int
 acpi_processor_register_performance(struct acpi_processor_performance
 				    *performance, unsigned int cpu)
 {
 	struct acpi_processor *pr;
 
-
 	if (!(acpi_processor_ppc_status & PPC_REGISTERED))
 		return -EINVAL;
 
@@ -781,8 +681,6 @@  acpi_processor_register_performance(struct acpi_processor_performance
 		return -EIO;
 	}
 
-	acpi_cpufreq_add_file(pr);
-
 	mutex_unlock(&performance_mutex);
 	return 0;
 }
@@ -795,7 +693,6 @@  acpi_processor_unregister_performance(struct acpi_processor_performance
 {
 	struct acpi_processor *pr;
 
-
 	mutex_lock(&performance_mutex);
 
 	pr = per_cpu(processors, cpu);
@@ -808,8 +705,6 @@  acpi_processor_unregister_performance(struct acpi_processor_performance
 		kfree(pr->performance->states);
 	pr->performance = NULL;
 
-	acpi_cpufreq_remove_file(pr);
-
 	mutex_unlock(&performance_mutex);
 
 	return;