===================================================================
@@ -199,11 +199,6 @@ and is between 256 and 4096 characters.
unusable. The "log_buf_len" parameter may be useful
if you need to capture more output.
- acpi_display_output= [HW,ACPI]
- acpi_display_output=vendor
- acpi_display_output=video
- See above.
-
acpi_irq_balance [HW,ACPI]
ACPI will balance active IRQs
default in APIC mode
===================================================================
@@ -33,7 +33,6 @@
#include <linux/input.h>
#include <linux/backlight.h>
#include <linux/thermal.h>
-#include <linux/video_output.h>
#include <linux/sort.h>
#include <linux/pci.h>
#include <linux/pci_ids.h>
@@ -172,9 +171,6 @@ struct acpi_video_device_cap {
u8 _BQC:1; /* Get current brightness level */
u8 _BCQ:1; /* Some buggy BIOS uses _BCQ instead of _BQC */
u8 _DDC:1; /*Return the EDID for this device */
- u8 _DCS:1; /*Return status of output device */
- u8 _DGS:1; /*Query graphics state */
- u8 _DSS:1; /*Device state set */
};
struct acpi_video_brightness_flags {
@@ -202,7 +198,6 @@ struct acpi_video_device {
struct acpi_video_device_brightness *brightness;
struct backlight_device *backlight;
struct thermal_cooling_device *cooling_dev;
- struct output_device *output_dev;
};
static const char device_decode[][30] = {
@@ -226,10 +221,6 @@ static int acpi_video_get_next_level(str
u32 level_current, u32 event);
static int acpi_video_switch_brightness(struct acpi_video_device *device,
int event);
-static int acpi_video_device_get_state(struct acpi_video_device *device,
- unsigned long long *state);
-static int acpi_video_output_get(struct output_device *od);
-static int acpi_video_device_set_state(struct acpi_video_device *device, int state);
/*backlight device sysfs support*/
static int acpi_video_get_brightness(struct backlight_device *bd)
@@ -265,30 +256,6 @@ static struct backlight_ops acpi_backlig
.update_status = acpi_video_set_brightness,
};
-/*video output device sysfs support*/
-static int acpi_video_output_get(struct output_device *od)
-{
- unsigned long long state;
- struct acpi_video_device *vd =
- (struct acpi_video_device *)dev_get_drvdata(&od->dev);
- acpi_video_device_get_state(vd, &state);
- return (int)state;
-}
-
-static int acpi_video_output_set(struct output_device *od)
-{
- unsigned long state = od->request_state;
- struct acpi_video_device *vd=
- (struct acpi_video_device *)dev_get_drvdata(&od->dev);
- return acpi_video_device_set_state(vd, state);
-}
-
-static struct output_properties acpi_output_properties = {
- .set_state = acpi_video_output_set,
- .get_status = acpi_video_output_get,
-};
-
-
/* thermal cooling device callbacks */
static int video_get_max_state(struct thermal_cooling_device *cooling_dev, unsigned
long *state)
@@ -344,34 +311,6 @@ static struct thermal_cooling_device_ops
Video Management
-------------------------------------------------------------------------- */
-/* device */
-
-static int
-acpi_video_device_get_state(struct acpi_video_device *device,
- unsigned long long *state)
-{
- int status;
-
- status = acpi_evaluate_integer(device->dev->handle, "_DCS", NULL, state);
-
- return status;
-}
-
-static int
-acpi_video_device_set_state(struct acpi_video_device *device, int state)
-{
- int status;
- union acpi_object arg0 = { ACPI_TYPE_INTEGER };
- struct acpi_object_list args = { 1, &arg0 };
- unsigned long long ret;
-
-
- arg0.integer.value = state;
- status = acpi_evaluate_integer(device->dev->handle, "_DSS", &args, &ret);
-
- return status;
-}
-
static int
acpi_video_device_lcd_query_levels(struct acpi_video_device *device,
union acpi_object **levels)
@@ -831,15 +770,6 @@ static void acpi_video_device_find_cap(s
if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle, "_DDC", &h_dummy1))) {
device->cap._DDC = 1;
}
- if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle, "_DCS", &h_dummy1))) {
- device->cap._DCS = 1;
- }
- if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle, "_DGS", &h_dummy1))) {
- device->cap._DGS = 1;
- }
- if (ACPI_SUCCESS(acpi_get_handle(device->dev->handle, "_DSS", &h_dummy1))) {
- device->cap._DSS = 1;
- }
if (acpi_video_backlight_support()) {
struct backlight_properties props;
@@ -904,21 +834,6 @@ static void acpi_video_device_find_cap(s
printk(KERN_ERR PREFIX "Create sysfs link\n");
}
-
- if (acpi_video_display_switch_support()) {
-
- if (device->cap._DCS && device->cap._DSS) {
- static int count;
- char *name;
- name = kasprintf(GFP_KERNEL, "acpi_video%d", count);
- if (!name)
- return;
- count++;
- device->output_dev = video_output_register(name,
- NULL, device, &acpi_output_properties);
- kfree(name);
- }
- }
}
/*
@@ -1452,7 +1367,6 @@ static int acpi_video_bus_put_one_device
thermal_cooling_device_unregister(device->cooling_dev);
device->cooling_dev = NULL;
}
- video_output_unregister(device->output_dev);
return 0;
}
===================================================================
@@ -17,15 +17,14 @@
* capabilities the graphics cards plugged in support. The check for general
* video capabilities will be triggered by the first caller of
* acpi_video_get_capabilities(NULL); which will happen when the first
- * backlight (or display output) switching supporting driver calls:
+ * backlight switching supporting driver calls:
* acpi_video_backlight_support();
*
* Depending on whether ACPI graphics extensions (cmp. ACPI spec Appendix B)
* are available, video.ko should be used to handle the device.
*
* Otherwise vendor specific drivers like thinkpad_acpi, asus_acpi,
- * sony_acpi,... can take care about backlight brightness and display output
- * switching.
+ * sony_acpi,... can take care about backlight brightness.
*
* If CONFIG_ACPI_VIDEO is neither set as "compiled in" (y) nor as a module (m)
* this file will not be compiled, acpi_video_get_capabilities() and
@@ -83,11 +82,6 @@ long acpi_is_video_device(struct acpi_de
if (!device)
return 0;
- /* Is this device able to support video switching ? */
- if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOD", &h_dummy)) ||
- ACPI_SUCCESS(acpi_get_handle(device->handle, "_DOS", &h_dummy)))
- video_caps |= ACPI_VIDEO_OUTPUT_SWITCHING;
-
/* Is this device able to retrieve a video ROM ? */
if (ACPI_SUCCESS(acpi_get_handle(device->handle, "_ROM", &h_dummy)))
video_caps |= ACPI_VIDEO_ROM_AVAILABLE;
@@ -161,8 +155,6 @@ long acpi_video_get_capabilities(acpi_ha
*
* if (dmi_name_in_vendors("XY")) {
* acpi_video_support |=
- * ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VENDOR;
- * acpi_video_support |=
* ACPI_VIDEO_BACKLIGHT_DMI_VENDOR;
*}
*/
@@ -212,33 +204,8 @@ int acpi_video_backlight_support(void)
EXPORT_SYMBOL(acpi_video_backlight_support);
/*
- * Returns true if video.ko can do display output switching.
- * This does not work well/at all with binary graphics drivers
- * which disable system io ranges and do it on their own.
- */
-int acpi_video_display_switch_support(void)
-{
- if (!acpi_video_caps_checked)
- acpi_video_get_capabilities(NULL);
-
- if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VENDOR)
- return 0;
- else if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VIDEO)
- return 1;
-
- if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VENDOR)
- return 0;
- else if (acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING_DMI_VIDEO)
- return 1;
-
- return acpi_video_support & ACPI_VIDEO_OUTPUT_SWITCHING;
-}
-EXPORT_SYMBOL(acpi_video_display_switch_support);
-
-/*
- * Use acpi_display_output=vendor/video or acpi_backlight=vendor/video
- * To force that backlight or display output switching is processed by vendor
- * specific acpi drivers or video.ko driver.
+ * Use acpi_backlight=vendor/video to force that backlight switching
+ * is processed by vendor specific acpi drivers or video.ko driver.
*/
static int __init acpi_backlight(char *str)
{
@@ -255,19 +222,3 @@ static int __init acpi_backlight(char *s
return 1;
}
__setup("acpi_backlight=", acpi_backlight);
-
-static int __init acpi_display_output(char *str)
-{
- if (str == NULL || *str == '\0')
- return 1;
- else {
- if (!strcmp("vendor", str))
- acpi_video_support |=
- ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VENDOR;
- if (!strcmp("video", str))
- acpi_video_support |=
- ACPI_VIDEO_OUTPUT_SWITCHING_FORCE_VIDEO;
- }
- return 1;
-}
-__setup("acpi_display_output=", acpi_display_output);
===================================================================
@@ -107,7 +107,6 @@ config DRM_I915
select FB_CFB_IMAGEBLIT
# i915 depends on ACPI_VIDEO when ACPI is enabled
# but for select to work, need to select ACPI_VIDEO's dependencies, ick
- select VIDEO_OUTPUT_CONTROL if ACPI
select BACKLIGHT_CLASS_DEVICE if ACPI
select INPUT if ACPI
select ACPI_VIDEO if ACPI
===================================================================
@@ -3,7 +3,6 @@ config STUB_POULSBO
depends on PCI
# Poulsbo stub depends on ACPI_VIDEO when ACPI is enabled
# but for select to work, need to select ACPI_VIDEO's dependencies, ick
- select VIDEO_OUTPUT_CONTROL if ACPI
select BACKLIGHT_CLASS_DEVICE if ACPI
select INPUT if ACPI
select ACPI_VIDEO if ACPI