@@ -91,6 +91,8 @@ struct acpi_gpe_event_info *acpi_ev_low_get_gpe_info(u32 gpe_number,
struct acpi_gpe_block_info
*gpe_block);
+acpi_status acpi_ev_finish_gpe(struct acpi_gpe_event_info *gpe_event_info);
+
/*
* evgpeblk - Upper-level GPE block support
*/
@@ -419,6 +419,7 @@ struct acpi_gpe_handler_info {
union acpi_gpe_dispatch_info {
struct acpi_namespace_node *method_node; /* Method node for this GPE level */
struct acpi_gpe_handler_info *handler; /* Installed GPE handler */
+ struct acpi_namespace_node *device_node; /* Parent _PRW device for implicit notify */
};
/*
@@ -115,12 +115,13 @@ acpi_ev_enable_gpe(struct acpi_gpe_event_info *gpe_event_info)
ACPI_FUNCTION_TRACE(ev_enable_gpe);
/*
- * We will only allow a GPE to be enabled if it has either an
- * associated method (_Lxx/_Exx) or a handler. Otherwise, the
- * GPE will be immediately disabled by acpi_ev_gpe_dispatch the
- * first time it fires.
+ * We will only allow a GPE to be enabled if it has either an associated
+ * method (_Lxx/_Exx) or a handler, or is using the implicit notify
+ * feature. Otherwise, the GPE will be immediately disabled by
+ * acpi_ev_gpe_dispatch the first time it fires.
*/
- if (!(gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK)) {
+ if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
+ ACPI_GPE_DISPATCH_NONE) {
return_ACPI_STATUS(AE_NO_HANDLER);
}
@@ -486,12 +487,26 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context)
return_VOID;
}
- /*
- * Must check for control method type dispatch one more time to avoid a
- * race with ev_gpe_install_handler
- */
- if ((local_gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
- ACPI_GPE_DISPATCH_METHOD) {
+ /* Do the correct dispatch - normal method or implicit notify */
+
+ switch (local_gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) {
+ case ACPI_GPE_DISPATCH_NOTIFY:
+
+ /*
+ * Implicit notify.
+ * Dispatch a DEVICE_WAKE notify to the appropriate handler.
+ * NOTE: the request is queued for execution after this method
+ * completes. The notify handlers are NOT invoked synchronously
+ * from this thread -- because handlers may in turn run other
+ * control methods.
+ */
+ status =
+ acpi_ev_queue_notify_request(local_gpe_event_info->dispatch.
+ device_node,
+ ACPI_NOTIFY_DEVICE_WAKE);
+ break;
+
+ case ACPI_GPE_DISPATCH_METHOD:
/* Allocate the evaluation information block */
@@ -518,6 +533,11 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context)
(local_gpe_event_info->dispatch.
method_node)));
}
+
+ break;
+
+ default:
+ return_VOID; /* Should never happen */
}
/* Defer enabling of GPE until all notify handlers are done */
@@ -531,6 +551,7 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context)
return_VOID;
}
+
/*******************************************************************************
*
* FUNCTION: acpi_ev_asynch_enable_gpe
@@ -541,38 +562,60 @@ static void ACPI_SYSTEM_XFACE acpi_ev_asynch_execute_gpe_method(void *context)
* RETURN: None
*
* DESCRIPTION: Asynchronous clear/enable for GPE. This allows the GPE to
- * complete.
+ * complete (i.e., finish execution of Notify)
*
******************************************************************************/
static void ACPI_SYSTEM_XFACE acpi_ev_asynch_enable_gpe(void *context)
{
struct acpi_gpe_event_info *gpe_event_info = context;
+
+ (void)acpi_ev_finish_gpe(gpe_event_info);
+
+ ACPI_FREE(gpe_event_info);
+ return;
+}
+
+
+/*******************************************************************************
+ *
+ * FUNCTION: acpi_ev_finish_gpe
+ *
+ * PARAMETERS: gpe_event_info - Info for this GPE
+ *
+ * RETURN: Status
+ *
+ * DESCRIPTION: Clear/Enable a GPE. Common code that is used after execution
+ * of a GPE method or a synchronous or asynchronous GPE handler.
+ *
+ ******************************************************************************/
+
+acpi_status acpi_ev_finish_gpe(struct acpi_gpe_event_info *gpe_event_info)
+{
acpi_status status;
if ((gpe_event_info->flags & ACPI_GPE_XRUPT_TYPE_MASK) ==
ACPI_GPE_LEVEL_TRIGGERED) {
/*
- * GPE is level-triggered, we clear the GPE status bit after handling
- * the event.
+ * GPE is level-triggered, we clear the GPE status bit after
+ * handling the event.
*/
status = acpi_hw_clear_gpe(gpe_event_info);
if (ACPI_FAILURE(status)) {
- goto exit;
+ return (status);
}
}
/*
- * Enable this GPE, conditionally. This means that the GPE will only be
- * physically enabled if the enable_for_run bit is set in the event_info
+ * Enable this GPE, conditionally. This means that the GPE will
+ * only be physically enabled if the enable_for_run bit is set
+ * in the event_info.
*/
(void)acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_CONDITIONAL_ENABLE);
-
-exit:
- ACPI_FREE(gpe_event_info);
- return;
+ return (AE_OK);
}
+
/*******************************************************************************
*
* FUNCTION: acpi_ev_gpe_dispatch
@@ -595,6 +638,7 @@ acpi_ev_gpe_dispatch(struct acpi_namespace_node *gpe_device,
struct acpi_gpe_event_info *gpe_event_info, u32 gpe_number)
{
acpi_status status;
+ u32 return_value;
ACPI_FUNCTION_TRACE(ev_gpe_dispatch);
@@ -616,54 +660,49 @@ acpi_ev_gpe_dispatch(struct acpi_namespace_node *gpe_device,
}
/*
- * Dispatch the GPE to either an installed handler, or the control method
- * associated with this GPE (_Lxx or _Exx). If a handler exists, we invoke
- * it and do not attempt to run the method. If there is neither a handler
- * nor a method, we disable this GPE to prevent further such pointless
- * events from firing.
+ * Always disable the GPE so that it does not keep firing before
+ * any asynchronous activity completes (either from the execution
+ * of a GPE method or an asynchronous GPE handler.)
+ *
+ * If there is no handler or method to run, just disable the
+ * GPE and leave it disabled permanently to prevent further such
+ * pointless events from firing.
+ */
+ status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE);
+ if (ACPI_FAILURE(status)) {
+ ACPI_EXCEPTION((AE_INFO, status,
+ "Unable to disable GPE%02X", gpe_number));
+ return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
+ }
+
+ /*
+ * Dispatch the GPE to either an installed handler or the control
+ * method associated with this GPE (_Lxx or _Exx). If a handler
+ * exists, we invoke it and do not attempt to run the method.
+ * If there is neither a handler nor a method, leave the GPE
+ * disabled.
*/
switch (gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) {
case ACPI_GPE_DISPATCH_HANDLER:
- /*
- * Invoke the installed handler (at interrupt level)
- * Ignore return status for now.
- * TBD: leave GPE disabled on error?
- */
- (void)gpe_event_info->dispatch.handler->address(gpe_device,
- gpe_number,
- gpe_event_info->
- dispatch.
- handler->
- context);
-
- /* It is now safe to clear level-triggered events. */
-
- if ((gpe_event_info->flags & ACPI_GPE_XRUPT_TYPE_MASK) ==
- ACPI_GPE_LEVEL_TRIGGERED) {
- status = acpi_hw_clear_gpe(gpe_event_info);
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status,
- "Unable to clear GPE[0x%2X]",
- gpe_number));
- return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
- }
+ /* Invoke the installed handler (at interrupt level) */
+
+ return_value =
+ gpe_event_info->dispatch.handler->address(gpe_device,
+ gpe_number,
+ gpe_event_info->
+ dispatch.handler->
+ context);
+
+ /* If requested, clear (if level-triggered) and reenable the GPE */
+
+ if (return_value & ACPI_REENABLE_GPE) {
+ (void)acpi_ev_finish_gpe(gpe_event_info);
}
break;
case ACPI_GPE_DISPATCH_METHOD:
-
- /*
- * Disable the GPE, so it doesn't keep firing before the method has a
- * chance to run (it runs asynchronously with interrupts enabled).
- */
- status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE);
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status,
- "Unable to disable GPE[0x%2X]",
- gpe_number));
- return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
- }
+ case ACPI_GPE_DISPATCH_NOTIFY:
/*
* Execute the method associated with the GPE
@@ -690,17 +729,6 @@ acpi_ev_gpe_dispatch(struct acpi_namespace_node *gpe_device,
"No handler or method for GPE[0x%2X], disabling event",
gpe_number));
- /*
- * Disable the GPE. The GPE will remain disabled a handler
- * is installed or ACPICA is restarted.
- */
- status = acpi_hw_low_set_gpe(gpe_event_info, ACPI_GPE_DISABLE);
- if (ACPI_FAILURE(status)) {
- ACPI_EXCEPTION((AE_INFO, status,
- "Unable to disable GPE[0x%2X]",
- gpe_number));
- return_UINT32(ACPI_INTERRUPT_NOT_HANDLED);
- }
break;
}
@@ -472,9 +472,14 @@ acpi_ev_initialize_gpe_block(struct acpi_gpe_xrupt_info *gpe_xrupt_info,
gpe_index = (i * ACPI_GPE_REGISTER_WIDTH) + j;
gpe_event_info = &gpe_block->event_info[gpe_index];
- /* Ignore GPEs that have no corresponding _Lxx/_Exx method */
-
- if (!(gpe_event_info->flags & ACPI_GPE_DISPATCH_METHOD)
+ /*
+ * Ignore GPEs that have no corresponding _Lxx/_Exx method
+ * and GPEs that are used to wake the system
+ */
+ if (((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
+ ACPI_GPE_DISPATCH_NONE)
+ || ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK)
+ == ACPI_GPE_DISPATCH_HANDLER)
|| (gpe_event_info->flags & ACPI_GPE_CAN_WAKE)) {
continue;
}
@@ -412,6 +412,7 @@ acpi_ev_match_gpe_method(acpi_handle obj_handle,
* Add the GPE information from above to the gpe_event_info block for
* use during dispatch of this GPE.
*/
+ gpe_event_info->flags &= ~(ACPI_GPE_DISPATCH_MASK);
gpe_event_info->flags |= (u8)(type | ACPI_GPE_DISPATCH_METHOD);
gpe_event_info->dispatch.method_node = method_node;
@@ -166,39 +166,75 @@ acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number)
}
ACPI_EXPORT_SYMBOL(acpi_disable_gpe)
+
/*******************************************************************************
*
* FUNCTION: acpi_setup_gpe_for_wake
*
- * PARAMETERS: gpe_device - Parent GPE Device. NULL for GPE0/GPE1
- * gpe_number - GPE level within the GPE block
+ * PARAMETERS: wake_device - Device associated with the GPE (via _PRW)
+ * gpe_device - Parent GPE Device. NULL for GPE0/GPE1
+ * gpe_number - GPE level within the GPE block
*
* RETURN: Status
*
- * DESCRIPTION: Set the ACPI_GPE_CAN_WAKE flag for the given GPE. If the GPE
- * has a corresponding method and is currently enabled, disable it
- * (GPEs with corresponding methods are enabled unconditionally
- * during initialization, but GPEs that can wake up are expected
- * to be initially disabled).
+ * DESCRIPTION: Mark a GPE as having the ability to wake the system. This
+ * interface is intended to be used as the host executes the
+ * _PRW methods (Power Resources for Wake) in the system tables.
+ * Each _PRW appears under a Device Object (The wake_device), and
+ * contains the info for the wake GPE associated with the
+ * wake_device.
*
******************************************************************************/
-acpi_status acpi_setup_gpe_for_wake(acpi_handle gpe_device, u32 gpe_number)
+acpi_status
+acpi_setup_gpe_for_wake(acpi_handle wake_device,
+ acpi_handle gpe_device, u32 gpe_number)
{
- acpi_status status = AE_OK;
+ acpi_status status = AE_BAD_PARAMETER;
struct acpi_gpe_event_info *gpe_event_info;
+ struct acpi_namespace_node *device_node;
acpi_cpu_flags flags;
ACPI_FUNCTION_TRACE(acpi_setup_gpe_for_wake);
+ /* Parameter Validation */
+
+ if (!wake_device) {
+ /*
+ * By forcing wake_device to be valid, we automatically enable the
+ * implicit notify feature on all hosts.
+ */
+ return_ACPI_STATUS(AE_BAD_PARAMETER);
+ }
+
+ /* Validate wake_device is of type Device */
+
+ device_node = ACPI_CAST_PTR(struct acpi_namespace_node, wake_device);
+ if (device_node->type != ACPI_TYPE_DEVICE) {
+ return_ACPI_STATUS(AE_BAD_PARAMETER);
+ }
+
flags = acpi_os_acquire_lock(acpi_gbl_gpe_lock);
/* Ensure that we have a valid GPE number */
gpe_event_info = acpi_ev_get_gpe_event_info(gpe_device, gpe_number);
if (gpe_event_info) {
+ /*
+ * If there is no method or handler for this GPE, then the
+ * wake_device will be notified whenever this GPE fires (aka
+ * "implicit notify") Note: The GPE is assumed to be
+ * level-triggered (for windows compatibility).
+ */
+ if ((gpe_event_info->flags & ACPI_GPE_DISPATCH_MASK) ==
+ ACPI_GPE_DISPATCH_NONE) {
+ gpe_event_info->flags =
+ (ACPI_GPE_DISPATCH_NOTIFY |
+ ACPI_GPE_LEVEL_TRIGGERED);
+ gpe_event_info->dispatch.device_node = device_node;
+ }
+
gpe_event_info->flags |= ACPI_GPE_CAN_WAKE;
- } else {
- status = AE_BAD_PARAMETER;
+ status = AE_OK;
}
acpi_os_release_lock(acpi_gbl_gpe_lock, flags);
@@ -750,7 +750,8 @@ acpi_bus_extract_wakeup_device_power_package(struct acpi_device *device,
device->wakeup.resources.handles[i] = element->reference.handle;
}
- acpi_setup_gpe_for_wake(device->wakeup.gpe_device, device->wakeup.gpe_number);
+ acpi_setup_gpe_for_wake(device->wakeup.gpe_device, NULL,
+ device->wakeup.gpe_number);
return AE_OK;
}
@@ -292,10 +292,12 @@ acpi_status acpi_enable_gpe(acpi_handle gpe_device, u32 gpe_number);
acpi_status acpi_disable_gpe(acpi_handle gpe_device, u32 gpe_number);
-acpi_status acpi_setup_gpe_for_wake(acpi_handle gpe_device, u32 gpe_number);
-
acpi_status acpi_clear_gpe(acpi_handle gpe_device, u32 gpe_number);
+acpi_status
+acpi_setup_gpe_for_wake(acpi_handle parent_device,
+ acpi_handle gpe_device, u32 gpe_number);
+
acpi_status acpi_set_gpe_wake_mask(acpi_handle gpe_device, u32 gpe_number, u8 action);
acpi_status
@@ -664,25 +664,26 @@ typedef u32 acpi_event_status;
/*
* GPE info flags - Per GPE
- * +-------+---+-+-+
- * | 7:4 |3:2|1|0|
- * +-------+---+-+-+
- * | | | |
- * | | | +--- Interrupt type: edge or level triggered
- * | | +----- GPE can wake the system
- * | +-------- Type of dispatch:to method, handler, or none
- * +-------------- <Reserved>
+ * +-------+-+-+---+
+ * | 7:4 |3|2|1:0|
+ * +-------+-+-+---+
+ * | | | |
+ * | | | +-- Type of dispatch:to method, handler, notify, or none
+ * | | +----- Interrupt type: edge or level triggered
+ * | +------- Is a Wake GPE
+ * +------------ <Reserved>
*/
-#define ACPI_GPE_XRUPT_TYPE_MASK (u8) 0x01
-#define ACPI_GPE_LEVEL_TRIGGERED (u8) 0x01
-#define ACPI_GPE_EDGE_TRIGGERED (u8) 0x00
+#define ACPI_GPE_DISPATCH_NONE (u8) 0x00
+#define ACPI_GPE_DISPATCH_METHOD (u8) 0x01
+#define ACPI_GPE_DISPATCH_HANDLER (u8) 0x02
+#define ACPI_GPE_DISPATCH_NOTIFY (u8) 0x03
+#define ACPI_GPE_DISPATCH_MASK (u8) 0x03
-#define ACPI_GPE_CAN_WAKE (u8) 0x02
+#define ACPI_GPE_LEVEL_TRIGGERED (u8) 0x04
+#define ACPI_GPE_EDGE_TRIGGERED (u8) 0x00
+#define ACPI_GPE_XRUPT_TYPE_MASK (u8) 0x04
-#define ACPI_GPE_DISPATCH_MASK (u8) 0x0C
-#define ACPI_GPE_DISPATCH_HANDLER (u8) 0x04
-#define ACPI_GPE_DISPATCH_METHOD (u8) 0x08
-#define ACPI_GPE_DISPATCH_NOT_USED (u8) 0x00
+#define ACPI_GPE_CAN_WAKE (u8) 0x08
/*
* Flags for GPE and Lock interfaces
@@ -954,6 +955,10 @@ u32 (*acpi_interface_handler) (acpi_string interface_name, u32 supported);
#define ACPI_INTERRUPT_NOT_HANDLED 0x00
#define ACPI_INTERRUPT_HANDLED 0x01
+/* GPE handler return values */
+
+#define ACPI_REENABLE_GPE 0x80
+
/* Length of 32-bit EISAID values when converted back to a string */
#define ACPI_EISAID_STRING_SIZE 8 /* Includes null terminator */