diff mbox

[v4,3/4] ACPI: Update Memory hotplug messages

Message ID 1343358344-31517-4-git-send-email-toshi.kani@hp.com (mailing list archive)
State New, archived
Headers show

Commit Message

Toshi Kani July 27, 2012, 3:05 a.m. UTC
Updated Memory hotplug log messages with acpi_pr_<level>(),
dev_<level>() and pr_<level>().

Signed-off-by: Toshi Kani <toshi.kani@hp.com>
---
 drivers/acpi/acpi_memhotplug.c |   25 +++++++++++++------------
 1 files changed, 13 insertions(+), 12 deletions(-)
diff mbox

Patch

diff --git a/drivers/acpi/acpi_memhotplug.c b/drivers/acpi/acpi_memhotplug.c
index 24c807f..183fa3d 100644
--- a/drivers/acpi/acpi_memhotplug.c
+++ b/drivers/acpi/acpi_memhotplug.c
@@ -170,7 +170,7 @@  acpi_memory_get_device(acpi_handle handle,
 	/* Get the parent device */
 	result = acpi_bus_get_device(phandle, &pdevice);
 	if (result) {
-		printk(KERN_WARNING PREFIX "Cannot get acpi bus device");
+		acpi_pr_warn(phandle, "Cannot get acpi bus device\n");
 		return -EINVAL;
 	}
 
@@ -180,14 +180,14 @@  acpi_memory_get_device(acpi_handle handle,
 	 */
 	result = acpi_bus_add(&device, pdevice, handle, ACPI_BUS_TYPE_DEVICE);
 	if (result) {
-		printk(KERN_WARNING PREFIX "Cannot add acpi bus");
+		acpi_pr_warn(handle, "Cannot add acpi bus\n");
 		return -EINVAL;
 	}
 
       end:
 	*mem_device = acpi_driver_data(device);
 	if (!(*mem_device)) {
-		printk(KERN_ERR "\n driver data not found");
+		dev_err(&device->dev, "driver data not found\n");
 		return -ENODEV;
 	}
 
@@ -224,7 +224,8 @@  static int acpi_memory_enable_device(struct acpi_memory_device *mem_device)
 	/* Get the range from the _CRS */
 	result = acpi_memory_get_device_resources(mem_device);
 	if (result) {
-		printk(KERN_ERR PREFIX "get_device_resources failed\n");
+		dev_err(&mem_device->device->dev,
+			"get_device_resources failed\n");
 		mem_device->state = MEMORY_INVALID_STATE;
 		return result;
 	}
@@ -257,7 +258,7 @@  static int acpi_memory_enable_device(struct acpi_memory_device *mem_device)
 		num_enabled++;
 	}
 	if (!num_enabled) {
-		printk(KERN_ERR PREFIX "add_memory failed\n");
+		dev_err(&mem_device->device->dev, "add_memory failed\n");
 		mem_device->state = MEMORY_INVALID_STATE;
 		return -EINVAL;
 	}
@@ -353,7 +354,7 @@  static void acpi_memory_device_notify(acpi_handle handle, u32 event, void *data)
 			ACPI_DEBUG_PRINT((ACPI_DB_INFO,
 					  "\nReceived DEVICE CHECK notification for device\n"));
 		if (acpi_memory_get_device(handle, &mem_device)) {
-			printk(KERN_ERR PREFIX "Cannot find driver data\n");
+			acpi_pr_err(handle, "Cannot find driver data\n");
 			break;
 		}
 
@@ -361,7 +362,7 @@  static void acpi_memory_device_notify(acpi_handle handle, u32 event, void *data)
 			break;
 
 		if (acpi_memory_enable_device(mem_device)) {
-			printk(KERN_ERR PREFIX "Cannot enable memory device\n");
+			acpi_pr_err(handle, "Cannot enable memory device\n");
 			break;
 		}
 
@@ -373,12 +374,12 @@  static void acpi_memory_device_notify(acpi_handle handle, u32 event, void *data)
 				  "\nReceived EJECT REQUEST notification for device\n"));
 
 		if (acpi_bus_get_device(handle, &device)) {
-			printk(KERN_ERR PREFIX "Device doesn't exist\n");
+			acpi_pr_err(handle, "Device doesn't exist\n");
 			break;
 		}
 		mem_device = acpi_driver_data(device);
 		if (!mem_device) {
-			printk(KERN_ERR PREFIX "Driver Data is NULL\n");
+			acpi_pr_err(handle, "Driver Data is NULL\n");
 			break;
 		}
 
@@ -389,7 +390,7 @@  static void acpi_memory_device_notify(acpi_handle handle, u32 event, void *data)
 		 *      with generic sysfs driver
 		 */
 		if (acpi_memory_disable_device(mem_device)) {
-			printk(KERN_ERR PREFIX "Disable memory device\n");
+			acpi_pr_err(handle, "Failed to remove memory device\n");
 			/*
 			 * If _EJ0 was called but failed, _OST is not
 			 * necessary.
@@ -449,7 +450,7 @@  static int acpi_memory_device_add(struct acpi_device *device)
 	/* Set the device state */
 	mem_device->state = MEMORY_POWER_ON_STATE;
 
-	printk(KERN_DEBUG "%s \n", acpi_device_name(device));
+	pr_debug("%s\n", acpi_device_name(device));
 
 	/*
 	 * Early boot code has recognized memory area by EFI/E820.
@@ -464,7 +465,7 @@  static int acpi_memory_device_add(struct acpi_device *device)
 		/* call add_memory func */
 		result = acpi_memory_enable_device(mem_device);
 		if (result)
-			printk(KERN_ERR PREFIX
+			dev_err(&device->dev,
 				"Error in acpi_memory_enable_device\n");
 	}
 	return result;