| Message ID | 1377807425-27423-1-git-send-email-nhorman@tuxdriver.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On Thu, Aug 29, 2013 at 1:17 PM, Neil Horman <nhorman@tuxdriver.com> wrote: > This is a fix for: > https://bugzilla.kernel.org/show_bug.cgi?id=60736 > > During the 3.8 devel cycle: > > commit 8c33f51df406e1a1f7fa4e9b244845b7ebd61fa6 > Author: Taku Izumi <izumi.taku@jp.fujitsu.com> > Date: Tue Oct 30 15:27:13 2012 +0900 > > PCI/ACPI: Request _OSC control before scanning PCI root bus > > went in to allow us to query the pcie hotplug flags during the acpi bus scan. > It however caused problems with the disabling of pcie aspm, and so: > commit b8178f130e25c1bdac1c33e0996f1ff6e20ec08e > Author: Bjorn Helgaas <bhelgaas@google.com> > Date: Mon Apr 1 15:47:39 2013 -0600 > > Revert "PCI/ACPI: Request _OSC control before scanning PCI root bus" > > Backed it out. This of course brought back the problem in which acpi took over > hotplug ports that were meant to be controlled by pcie. > > This patch gives us both items. It lets us request _OSC control before scanning > the pci root bus, but defers any disabling of aspm until after the scan is > complete, allowing us to properly handle old pcie 1.1 devices aspm settings > properly, as b8178f130e documents. > > Tested successfully by myself. > > Signed-off-by: Neil Horman <nhorman@tuxdriver.com> > CC: Len Brown <lenb@kernel.org> > CC: "Rafael J. Wysocki" <rjw@sisk.pl> > CC: linux-acpi@vger.kernel.org > CC: linux-pci@vger.kernel.org > --- > drivers/acpi/pci_root.c | 62 ++++++++++++++++++++++++++++++------------------- > 1 file changed, 38 insertions(+), 24 deletions(-) > > diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c > index 5917839..6110fd2 100644 > --- a/drivers/acpi/pci_root.c > +++ b/drivers/acpi/pci_root.c > @@ -378,6 +378,7 @@ static int acpi_pci_root_add(struct acpi_device *device, > struct acpi_pci_root *root; > u32 flags, base_flags; > acpi_handle handle = device->handle; > + bool no_aspm = false, clear_aspm = false; > > root = kzalloc(sizeof(struct acpi_pci_root), GFP_KERNEL); > if (!root) > @@ -437,27 +438,6 @@ static int acpi_pci_root_add(struct acpi_device *device, > flags = base_flags = OSC_PCI_SEGMENT_GROUPS_SUPPORT; > acpi_pci_osc_support(root, flags); > > - /* > - * TBD: Need PCI interface for enumeration/configuration of roots. > - */ > - > - /* > - * Scan the Root Bridge > - * -------------------- > - * Must do this prior to any attempt to bind the root device, as the > - * PCI namespace does not get created until this call is made (and > - * thus the root bridge's pci_dev does not exist). > - */ > - root->bus = pci_acpi_scan_root(root); > - if (!root->bus) { > - dev_err(&device->dev, > - "Bus %04x:%02x not present in PCI namespace\n", > - root->segment, (unsigned int)root->secondary.start); > - result = -ENODEV; > - goto end; > - } > - > - /* Indicate support for various _OSC capabilities. */ > if (pci_ext_cfg_avail()) > flags |= OSC_EXT_PCI_CONFIG_SUPPORT; > if (pcie_aspm_support_enabled()) { > @@ -471,7 +451,7 @@ static int acpi_pci_root_add(struct acpi_device *device, > if (ACPI_FAILURE(status)) { > dev_info(&device->dev, "ACPI _OSC support " > "notification failed, disabling PCIe ASPM\n"); > - pcie_no_aspm(); > + no_aspm = true; > flags = base_flags; > } > } > @@ -503,7 +483,7 @@ static int acpi_pci_root_add(struct acpi_device *device, > * We have ASPM control, but the FADT indicates > * that it's unsupported. Clear it. > */ > - pcie_clear_aspm(root->bus); > + clear_aspm = true; > } > } else { > dev_info(&device->dev, > @@ -512,7 +492,14 @@ static int acpi_pci_root_add(struct acpi_device *device, > acpi_format_exception(status), flags); > dev_info(&device->dev, > "ACPI _OSC control for PCIe not granted, disabling ASPM\n"); > - pcie_no_aspm(); > + /* > + * We want to disable aspm here, but aspm_disabled > + * needs to remain in its state from boot so that we > + * properly handle pcie 1.1 devices. So we set this > + * flag here, to defer the action until after the acpi > + * root scan > + */ > + no_aspm = true; > } > } else { > dev_info(&device->dev, > @@ -520,6 +507,33 @@ static int acpi_pci_root_add(struct acpi_device *device, > "(_OSC support mask: 0x%02x)\n", flags); > } > > + /* > + * TBD: Need PCI interface for enumeration/configuration of roots. > + */ > + > + /* > + * Scan the Root Bridge > + * -------------------- > + * Must do this prior to any attempt to bind the root device, as the > + * PCI namespace does not get created until this call is made (and > + * thus the root bridge's pci_dev does not exist). > + */ > + root->bus = pci_acpi_scan_root(root); > + if (!root->bus) { > + dev_err(&device->dev, > + "Bus %04x:%02x not present in PCI namespace\n", > + root->segment, (unsigned int)root->secondary.start); > + result = -ENODEV; > + goto end; > + } > + > + if (clear_aspm) { > + dev_info(&device->dev, "Disabling ASPM (FADT indicates it is unsupported)\n"); > + pcie_clear_aspm(root->bus); > + } > + if (no_aspm) > + pcie_no_aspm(); > + > pci_acpi_add_bus_pm_notifier(device, root->bus); > if (device->wakeup.flags.run_wake) > device_set_run_wake(root->bus->bridge, true); Also need to cc stable? Acked-by: Yinghai Lu <yinghai@kernel.org> -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Aug 29, 2013 at 04:17:05PM -0400, Neil Horman wrote: > This is a fix for: > https://bugzilla.kernel.org/show_bug.cgi?id=60736 > > During the 3.8 devel cycle: > > commit 8c33f51df406e1a1f7fa4e9b244845b7ebd61fa6 > Author: Taku Izumi <izumi.taku@jp.fujitsu.com> > Date: Tue Oct 30 15:27:13 2012 +0900 > > PCI/ACPI: Request _OSC control before scanning PCI root bus > > went in to allow us to query the pcie hotplug flags during the acpi bus scan. > It however caused problems with the disabling of pcie aspm, and so: > commit b8178f130e25c1bdac1c33e0996f1ff6e20ec08e > Author: Bjorn Helgaas <bhelgaas@google.com> > Date: Mon Apr 1 15:47:39 2013 -0600 > > Revert "PCI/ACPI: Request _OSC control before scanning PCI root bus" > > Backed it out. This of course brought back the problem in which acpi took over > hotplug ports that were meant to be controlled by pcie. > > This patch gives us both items. It lets us request _OSC control before scanning > the pci root bus, but defers any disabling of aspm until after the scan is > complete, allowing us to properly handle old pcie 1.1 devices aspm settings > properly, as b8178f130e documents. > > Tested successfully by myself. > > Signed-off-by: Neil Horman <nhorman@tuxdriver.com> > CC: Len Brown <lenb@kernel.org> > CC: "Rafael J. Wysocki" <rjw@sisk.pl> > CC: linux-acpi@vger.kernel.org > CC: linux-pci@vger.kernel.org I added Yinghai's ack and a stable tag and put this in pci/misc for v3.12. Thanks! I reworked the changelog because I think the actual cause of the regression was 3b63aaa70e, not the _OSC commits you mentioned: 8c33f51df4 ("PCI/ACPI: Request _OSC control before scanning PCI root bus") appeared in v3.8 and broke ASPM but not acpiphp. b8178f130e ('Revert "PCI/ACPI: Request _OSC control before scanning PCI root bus"') appeared in v3.9 and fixed ASPM, leaving acpiphp working. 3b63aaa70e ("PCI: acpiphp: Do not use ACPI PCI subdriver mechanism") appeared in v3.10, and I believe this is what actually broke acpiphp because it moved the acpiphp initialization earlier, into the bus scan. in v3.8: acpi_pci_root_add acpi_pci_osc_control_set # request OS control pci_acpi_scan_root # scan bus acpi_pci_root_start add_bridge # acpi_pci_driver .add method ... device_is_managed_by_native_pciehp # OK in v3.9: acpi_pci_root_add pci_acpi_scan_root # scan bus acpi_pci_osc_control_set # request OS control add_bridge # acpi_pci_driver .add method ... device_is_managed_by_native_pciehp # OK in v3.10: acpi_pci_root_add pci_acpi_scan_root # scan bus ... acpiphp_enumerate_slots ... device_is_managed_by_native_pciehp # PROBLEM acpi_pci_osc_control_set # request OS control So I added a stable tag for v3.10+ only. I'll ask Linus to merge it directly during the merge window for v3.12, and hopefully it will be backported to the v3.10 and v3.11 stable trees soon after that. Bjorn > --- > drivers/acpi/pci_root.c | 62 ++++++++++++++++++++++++++++++------------------- > 1 file changed, 38 insertions(+), 24 deletions(-) > > diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c > index 5917839..6110fd2 100644 > --- a/drivers/acpi/pci_root.c > +++ b/drivers/acpi/pci_root.c > @@ -378,6 +378,7 @@ static int acpi_pci_root_add(struct acpi_device *device, > struct acpi_pci_root *root; > u32 flags, base_flags; > acpi_handle handle = device->handle; > + bool no_aspm = false, clear_aspm = false; > > root = kzalloc(sizeof(struct acpi_pci_root), GFP_KERNEL); > if (!root) > @@ -437,27 +438,6 @@ static int acpi_pci_root_add(struct acpi_device *device, > flags = base_flags = OSC_PCI_SEGMENT_GROUPS_SUPPORT; > acpi_pci_osc_support(root, flags); > > - /* > - * TBD: Need PCI interface for enumeration/configuration of roots. > - */ > - > - /* > - * Scan the Root Bridge > - * -------------------- > - * Must do this prior to any attempt to bind the root device, as the > - * PCI namespace does not get created until this call is made (and > - * thus the root bridge's pci_dev does not exist). > - */ > - root->bus = pci_acpi_scan_root(root); > - if (!root->bus) { > - dev_err(&device->dev, > - "Bus %04x:%02x not present in PCI namespace\n", > - root->segment, (unsigned int)root->secondary.start); > - result = -ENODEV; > - goto end; > - } > - > - /* Indicate support for various _OSC capabilities. */ > if (pci_ext_cfg_avail()) > flags |= OSC_EXT_PCI_CONFIG_SUPPORT; > if (pcie_aspm_support_enabled()) { > @@ -471,7 +451,7 @@ static int acpi_pci_root_add(struct acpi_device *device, > if (ACPI_FAILURE(status)) { > dev_info(&device->dev, "ACPI _OSC support " > "notification failed, disabling PCIe ASPM\n"); > - pcie_no_aspm(); > + no_aspm = true; > flags = base_flags; > } > } > @@ -503,7 +483,7 @@ static int acpi_pci_root_add(struct acpi_device *device, > * We have ASPM control, but the FADT indicates > * that it's unsupported. Clear it. > */ > - pcie_clear_aspm(root->bus); > + clear_aspm = true; > } > } else { > dev_info(&device->dev, > @@ -512,7 +492,14 @@ static int acpi_pci_root_add(struct acpi_device *device, > acpi_format_exception(status), flags); > dev_info(&device->dev, > "ACPI _OSC control for PCIe not granted, disabling ASPM\n"); > - pcie_no_aspm(); > + /* > + * We want to disable aspm here, but aspm_disabled > + * needs to remain in its state from boot so that we > + * properly handle pcie 1.1 devices. So we set this > + * flag here, to defer the action until after the acpi > + * root scan > + */ > + no_aspm = true; > } > } else { > dev_info(&device->dev, > @@ -520,6 +507,33 @@ static int acpi_pci_root_add(struct acpi_device *device, > "(_OSC support mask: 0x%02x)\n", flags); > } > > + /* > + * TBD: Need PCI interface for enumeration/configuration of roots. > + */ > + > + /* > + * Scan the Root Bridge > + * -------------------- > + * Must do this prior to any attempt to bind the root device, as the > + * PCI namespace does not get created until this call is made (and > + * thus the root bridge's pci_dev does not exist). > + */ > + root->bus = pci_acpi_scan_root(root); > + if (!root->bus) { > + dev_err(&device->dev, > + "Bus %04x:%02x not present in PCI namespace\n", > + root->segment, (unsigned int)root->secondary.start); > + result = -ENODEV; > + goto end; > + } > + > + if (clear_aspm) { > + dev_info(&device->dev, "Disabling ASPM (FADT indicates it is unsupported)\n"); > + pcie_clear_aspm(root->bus); > + } > + if (no_aspm) > + pcie_no_aspm(); > + > pci_acpi_add_bus_pm_notifier(device, root->bus); > if (device->wakeup.flags.run_wake) > device_set_run_wake(root->bus->bridge, true); > -- > 1.8.1.4 > > -- > To unsubscribe from this list: send the line "unsubscribe linux-acpi" in > the body of a message to majordomo@vger.kernel.org > More majordomo info at http://vger.kernel.org/majordomo-info.html -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thu, Aug 29, 2013 at 05:40:52PM -0600, Bjorn Helgaas wrote: > On Thu, Aug 29, 2013 at 04:17:05PM -0400, Neil Horman wrote: > > This is a fix for: > > https://bugzilla.kernel.org/show_bug.cgi?id=60736 > > > > During the 3.8 devel cycle: > > > > commit 8c33f51df406e1a1f7fa4e9b244845b7ebd61fa6 > > Author: Taku Izumi <izumi.taku@jp.fujitsu.com> > > Date: Tue Oct 30 15:27:13 2012 +0900 > > > > PCI/ACPI: Request _OSC control before scanning PCI root bus > > > > went in to allow us to query the pcie hotplug flags during the acpi bus scan. > > It however caused problems with the disabling of pcie aspm, and so: > > commit b8178f130e25c1bdac1c33e0996f1ff6e20ec08e > > Author: Bjorn Helgaas <bhelgaas@google.com> > > Date: Mon Apr 1 15:47:39 2013 -0600 > > > > Revert "PCI/ACPI: Request _OSC control before scanning PCI root bus" > > > > Backed it out. This of course brought back the problem in which acpi took over > > hotplug ports that were meant to be controlled by pcie. > > > > This patch gives us both items. It lets us request _OSC control before scanning > > the pci root bus, but defers any disabling of aspm until after the scan is > > complete, allowing us to properly handle old pcie 1.1 devices aspm settings > > properly, as b8178f130e documents. > > > > Tested successfully by myself. > > > > Signed-off-by: Neil Horman <nhorman@tuxdriver.com> > > CC: Len Brown <lenb@kernel.org> > > CC: "Rafael J. Wysocki" <rjw@sisk.pl> > > CC: linux-acpi@vger.kernel.org > > CC: linux-pci@vger.kernel.org > > I added Yinghai's ack and a stable tag and put this in pci/misc > for v3.12. Thanks! > > I reworked the changelog because I think the actual cause of the > regression was 3b63aaa70e, not the _OSC commits you mentioned: > > 8c33f51df4 ("PCI/ACPI: Request _OSC control before scanning PCI root bus") > appeared in v3.8 and broke ASPM but not acpiphp. > > b8178f130e ('Revert "PCI/ACPI: Request _OSC control before scanning PCI > root bus"') appeared in v3.9 and fixed ASPM, leaving acpiphp working. > > 3b63aaa70e ("PCI: acpiphp: Do not use ACPI PCI subdriver mechanism") > appeared in v3.10, and I believe this is what actually broke acpiphp > because it moved the acpiphp initialization earlier, into the bus scan. > > in v3.8: > acpi_pci_root_add > acpi_pci_osc_control_set # request OS control > pci_acpi_scan_root # scan bus > acpi_pci_root_start > add_bridge # acpi_pci_driver .add method > ... > device_is_managed_by_native_pciehp # OK > > in v3.9: > acpi_pci_root_add > pci_acpi_scan_root # scan bus > acpi_pci_osc_control_set # request OS control > add_bridge # acpi_pci_driver .add method > ... > device_is_managed_by_native_pciehp # OK > > in v3.10: > acpi_pci_root_add > pci_acpi_scan_root # scan bus > ... > acpiphp_enumerate_slots > ... > device_is_managed_by_native_pciehp # PROBLEM > acpi_pci_osc_control_set # request OS control > > So I added a stable tag for v3.10+ only. I'll ask Linus to merge it > directly during the merge window for v3.12, and hopefully it will be > backported to the v3.10 and v3.11 stable trees soon after that. > > Bjorn > Copy that, thanks! Neil -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/acpi/pci_root.c b/drivers/acpi/pci_root.c index 5917839..6110fd2 100644 --- a/drivers/acpi/pci_root.c +++ b/drivers/acpi/pci_root.c @@ -378,6 +378,7 @@ static int acpi_pci_root_add(struct acpi_device *device, struct acpi_pci_root *root; u32 flags, base_flags; acpi_handle handle = device->handle; + bool no_aspm = false, clear_aspm = false; root = kzalloc(sizeof(struct acpi_pci_root), GFP_KERNEL); if (!root) @@ -437,27 +438,6 @@ static int acpi_pci_root_add(struct acpi_device *device, flags = base_flags = OSC_PCI_SEGMENT_GROUPS_SUPPORT; acpi_pci_osc_support(root, flags); - /* - * TBD: Need PCI interface for enumeration/configuration of roots. - */ - - /* - * Scan the Root Bridge - * -------------------- - * Must do this prior to any attempt to bind the root device, as the - * PCI namespace does not get created until this call is made (and - * thus the root bridge's pci_dev does not exist). - */ - root->bus = pci_acpi_scan_root(root); - if (!root->bus) { - dev_err(&device->dev, - "Bus %04x:%02x not present in PCI namespace\n", - root->segment, (unsigned int)root->secondary.start); - result = -ENODEV; - goto end; - } - - /* Indicate support for various _OSC capabilities. */ if (pci_ext_cfg_avail()) flags |= OSC_EXT_PCI_CONFIG_SUPPORT; if (pcie_aspm_support_enabled()) { @@ -471,7 +451,7 @@ static int acpi_pci_root_add(struct acpi_device *device, if (ACPI_FAILURE(status)) { dev_info(&device->dev, "ACPI _OSC support " "notification failed, disabling PCIe ASPM\n"); - pcie_no_aspm(); + no_aspm = true; flags = base_flags; } } @@ -503,7 +483,7 @@ static int acpi_pci_root_add(struct acpi_device *device, * We have ASPM control, but the FADT indicates * that it's unsupported. Clear it. */ - pcie_clear_aspm(root->bus); + clear_aspm = true; } } else { dev_info(&device->dev, @@ -512,7 +492,14 @@ static int acpi_pci_root_add(struct acpi_device *device, acpi_format_exception(status), flags); dev_info(&device->dev, "ACPI _OSC control for PCIe not granted, disabling ASPM\n"); - pcie_no_aspm(); + /* + * We want to disable aspm here, but aspm_disabled + * needs to remain in its state from boot so that we + * properly handle pcie 1.1 devices. So we set this + * flag here, to defer the action until after the acpi + * root scan + */ + no_aspm = true; } } else { dev_info(&device->dev, @@ -520,6 +507,33 @@ static int acpi_pci_root_add(struct acpi_device *device, "(_OSC support mask: 0x%02x)\n", flags); } + /* + * TBD: Need PCI interface for enumeration/configuration of roots. + */ + + /* + * Scan the Root Bridge + * -------------------- + * Must do this prior to any attempt to bind the root device, as the + * PCI namespace does not get created until this call is made (and + * thus the root bridge's pci_dev does not exist). + */ + root->bus = pci_acpi_scan_root(root); + if (!root->bus) { + dev_err(&device->dev, + "Bus %04x:%02x not present in PCI namespace\n", + root->segment, (unsigned int)root->secondary.start); + result = -ENODEV; + goto end; + } + + if (clear_aspm) { + dev_info(&device->dev, "Disabling ASPM (FADT indicates it is unsupported)\n"); + pcie_clear_aspm(root->bus); + } + if (no_aspm) + pcie_no_aspm(); + pci_acpi_add_bus_pm_notifier(device, root->bus); if (device->wakeup.flags.run_wake) device_set_run_wake(root->bus->bridge, true);
This is a fix for: https://bugzilla.kernel.org/show_bug.cgi?id=60736 During the 3.8 devel cycle: commit 8c33f51df406e1a1f7fa4e9b244845b7ebd61fa6 Author: Taku Izumi <izumi.taku@jp.fujitsu.com> Date: Tue Oct 30 15:27:13 2012 +0900 PCI/ACPI: Request _OSC control before scanning PCI root bus went in to allow us to query the pcie hotplug flags during the acpi bus scan. It however caused problems with the disabling of pcie aspm, and so: commit b8178f130e25c1bdac1c33e0996f1ff6e20ec08e Author: Bjorn Helgaas <bhelgaas@google.com> Date: Mon Apr 1 15:47:39 2013 -0600 Revert "PCI/ACPI: Request _OSC control before scanning PCI root bus" Backed it out. This of course brought back the problem in which acpi took over hotplug ports that were meant to be controlled by pcie. This patch gives us both items. It lets us request _OSC control before scanning the pci root bus, but defers any disabling of aspm until after the scan is complete, allowing us to properly handle old pcie 1.1 devices aspm settings properly, as b8178f130e documents. Tested successfully by myself. Signed-off-by: Neil Horman <nhorman@tuxdriver.com> CC: Len Brown <lenb@kernel.org> CC: "Rafael J. Wysocki" <rjw@sisk.pl> CC: linux-acpi@vger.kernel.org CC: linux-pci@vger.kernel.org --- drivers/acpi/pci_root.c | 62 ++++++++++++++++++++++++++++++------------------- 1 file changed, 38 insertions(+), 24 deletions(-)