diff mbox

[v3,1/1] ACPI, PCI, ISA: Call ISA-specific code only for architectures which support ISA.

Message ID 1392902866-5256-1-git-send-email-tomasz.nowicki@linaro.org (mailing list archive)
State Accepted, archived
Headers show

Commit Message

Tomasz Nowicki Feb. 20, 2014, 1:27 p.m. UTC
This commit moves ISA-specific code to separate function and makes that
function depend on CONFIG_{E}ISA so that we do not have to maintain
acpi_isa_irq_to_gsi() function for architectures which do not support ISA.

Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org>
---
 drivers/acpi/pci_irq.c |   36 +++++++++++++++++++++++++-----------
 1 file changed, 25 insertions(+), 11 deletions(-)

Comments

Rafael J. Wysocki Feb. 21, 2014, 12:02 a.m. UTC | #1
On Thursday, February 20, 2014 02:27:46 PM Tomasz Nowicki wrote:
> This commit moves ISA-specific code to separate function and makes that
> function depend on CONFIG_{E}ISA so that we do not have to maintain
> acpi_isa_irq_to_gsi() function for architectures which do not support ISA.
> 
> Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org>

Queued up for 3.15, thanks!

> ---
>  drivers/acpi/pci_irq.c |   36 +++++++++++++++++++++++++-----------
>  1 file changed, 25 insertions(+), 11 deletions(-)
> 
> diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
> index 361b40c..9c62340 100644
> --- a/drivers/acpi/pci_irq.c
> +++ b/drivers/acpi/pci_irq.c
> @@ -370,6 +370,30 @@ static struct acpi_prt_entry *acpi_pci_irq_lookup(struct pci_dev *dev, int pin)
>  	return NULL;
>  }
>  
> +#if IS_ENABLED(CONFIG_ISA) || IS_ENABLED(CONFIG_EISA)
> +static int acpi_isa_register_gsi(struct pci_dev *dev)
> +{
> +	u32 dev_gsi;
> +
> +	/* Interrupt Line values above 0xF are forbidden */
> +	if (dev->irq > 0 && (dev->irq <= 0xF) &&
> +	    (acpi_isa_irq_to_gsi(dev->irq, &dev_gsi) == 0)) {
> +		dev_warn(&dev->dev, "PCI INT %c: no GSI - using ISA IRQ %d\n",
> +			 pin_name(dev->pin), dev->irq);
> +		acpi_register_gsi(&dev->dev, dev_gsi,
> +				  ACPI_LEVEL_SENSITIVE,
> +				  ACPI_ACTIVE_LOW);
> +		return 0;
> +	}
> +	return -EINVAL;
> +}
> +#else
> +static inline int acpi_isa_register_gsi(struct pci_dev *dev)
> +{
> +	return -ENODEV;
> +}
> +#endif
> +
>  int acpi_pci_irq_enable(struct pci_dev *dev)
>  {
>  	struct acpi_prt_entry *entry;
> @@ -416,19 +440,9 @@ int acpi_pci_irq_enable(struct pci_dev *dev)
>  	 * driver reported one, then use it. Exit in any case.
>  	 */
>  	if (gsi < 0) {
> -		u32 dev_gsi;
> -		/* Interrupt Line values above 0xF are forbidden */
> -		if (dev->irq > 0 && (dev->irq <= 0xF) &&
> -		    (acpi_isa_irq_to_gsi(dev->irq, &dev_gsi) == 0)) {
> -			dev_warn(&dev->dev, "PCI INT %c: no GSI - using ISA IRQ %d\n",
> -				 pin_name(pin), dev->irq);
> -			acpi_register_gsi(&dev->dev, dev_gsi,
> -					  ACPI_LEVEL_SENSITIVE,
> -					  ACPI_ACTIVE_LOW);
> -		} else {
> +		if (acpi_isa_register_gsi(dev))
>  			dev_warn(&dev->dev, "PCI INT %c: no GSI\n",
>  				 pin_name(pin));
> -		}
>  
>  		kfree(entry);
>  		return 0;
>
diff mbox

Patch

diff --git a/drivers/acpi/pci_irq.c b/drivers/acpi/pci_irq.c
index 361b40c..9c62340 100644
--- a/drivers/acpi/pci_irq.c
+++ b/drivers/acpi/pci_irq.c
@@ -370,6 +370,30 @@  static struct acpi_prt_entry *acpi_pci_irq_lookup(struct pci_dev *dev, int pin)
 	return NULL;
 }
 
+#if IS_ENABLED(CONFIG_ISA) || IS_ENABLED(CONFIG_EISA)
+static int acpi_isa_register_gsi(struct pci_dev *dev)
+{
+	u32 dev_gsi;
+
+	/* Interrupt Line values above 0xF are forbidden */
+	if (dev->irq > 0 && (dev->irq <= 0xF) &&
+	    (acpi_isa_irq_to_gsi(dev->irq, &dev_gsi) == 0)) {
+		dev_warn(&dev->dev, "PCI INT %c: no GSI - using ISA IRQ %d\n",
+			 pin_name(dev->pin), dev->irq);
+		acpi_register_gsi(&dev->dev, dev_gsi,
+				  ACPI_LEVEL_SENSITIVE,
+				  ACPI_ACTIVE_LOW);
+		return 0;
+	}
+	return -EINVAL;
+}
+#else
+static inline int acpi_isa_register_gsi(struct pci_dev *dev)
+{
+	return -ENODEV;
+}
+#endif
+
 int acpi_pci_irq_enable(struct pci_dev *dev)
 {
 	struct acpi_prt_entry *entry;
@@ -416,19 +440,9 @@  int acpi_pci_irq_enable(struct pci_dev *dev)
 	 * driver reported one, then use it. Exit in any case.
 	 */
 	if (gsi < 0) {
-		u32 dev_gsi;
-		/* Interrupt Line values above 0xF are forbidden */
-		if (dev->irq > 0 && (dev->irq <= 0xF) &&
-		    (acpi_isa_irq_to_gsi(dev->irq, &dev_gsi) == 0)) {
-			dev_warn(&dev->dev, "PCI INT %c: no GSI - using ISA IRQ %d\n",
-				 pin_name(pin), dev->irq);
-			acpi_register_gsi(&dev->dev, dev_gsi,
-					  ACPI_LEVEL_SENSITIVE,
-					  ACPI_ACTIVE_LOW);
-		} else {
+		if (acpi_isa_register_gsi(dev))
 			dev_warn(&dev->dev, "PCI INT %c: no GSI\n",
 				 pin_name(pin));
-		}
 
 		kfree(entry);
 		return 0;