@@ -70,9 +70,9 @@ static struct gpio_desc *acpi_get_gpiod(char *path, int pin)
static irqreturn_t acpi_gpio_irq_handler(int irq, void *data)
{
- acpi_handle handle = data;
+ struct acpi_gpio_event *event = data;
- acpi_evaluate_object(handle, NULL, NULL, NULL);
+ acpi_evaluate_object(event->handle, NULL, NULL, NULL);
return IRQ_HANDLED;
}
@@ -91,111 +91,148 @@ static void acpi_gpio_chip_dh(acpi_handle handle, void *data)
/* The address of this function is used as a key. */
}
-/**
- * acpi_gpiochip_request_interrupts() - Register isr for gpio chip ACPI events
- * @acpi_gpio: ACPI GPIO chip
- *
- * ACPI5 platforms can use GPIO signaled ACPI events. These GPIO interrupts are
- * handled by ACPI event methods which need to be called from the GPIO
- * chip's interrupt handler. acpi_gpiochip_request_interrupts finds out which
- * gpio pins have acpi event methods and assigns interrupt handlers that calls
- * the acpi event methods for those pins.
- */
-static void acpi_gpiochip_request_interrupts(struct acpi_gpio_chip *acpi_gpio)
+static acpi_status acpi_gpiochip_request_interrupt(struct acpi_resource *ares,
+ void *context)
{
- struct acpi_buffer buf = {ACPI_ALLOCATE_BUFFER, NULL};
+ struct acpi_gpio_chip *acpi_gpio = context;
struct gpio_chip *chip = acpi_gpio->chip;
- struct acpi_resource *res;
+ struct acpi_resource_gpio *agpio;
acpi_handle handle, evt_handle;
- acpi_status status;
- unsigned int pin;
- int irq, ret;
- char ev_name[5];
+ struct acpi_gpio_event *event;
+ irq_handler_t handler = NULL;
+ struct gpio_desc *desc;
+ unsigned long irqflags;
+ int ret, pin, irq;
- if (!chip->dev || !chip->to_irq)
- return;
+ if (ares->type != ACPI_RESOURCE_TYPE_GPIO)
+ return AE_OK;
+
+ agpio = &ares->data.gpio;
+ if (agpio->connection_type != ACPI_RESOURCE_GPIO_TYPE_INT)
+ return AE_OK;
handle = ACPI_HANDLE(chip->dev);
- if (!handle)
- return;
+ pin = agpio->pin_table[0];
+
+ if (pin <= 255) {
+ char ev_name[5];
+ sprintf(ev_name, "_%c%02X",
+ agpio->triggering == ACPI_EDGE_SENSITIVE ? 'E' : 'L',
+ pin);
+ if (ACPI_SUCCESS(acpi_get_handle(handle, ev_name, &evt_handle)))
+ handler = acpi_gpio_irq_handler;
+ }
+ if (!handler) {
+ if (ACPI_SUCCESS(acpi_get_handle(handle, "_EVT", &evt_handle)))
+ handler = acpi_gpio_irq_handler_evt;
+ }
+ if (!handler)
+ return AE_BAD_PARAMETER;
- INIT_LIST_HEAD(&acpi_gpio->events);
+ desc = gpiochip_get_desc(chip, pin);
+ if (IS_ERR(desc)) {
+ dev_err(chip->dev, "Failed to get GPIO descriptor\n");
+ return AE_ERROR;
+ }
- /*
- * If a GPIO interrupt has an ACPI event handler method, or _EVT is
- * present, set up an interrupt handler that calls the ACPI event
- * handler.
- */
- for (res = buf.pointer;
- res && (res->type != ACPI_RESOURCE_TYPE_END_TAG);
- res = ACPI_NEXT_RESOURCE(res)) {
- irq_handler_t handler = NULL;
- void *data;
-
- if (res->type != ACPI_RESOURCE_TYPE_GPIO ||
- res->data.gpio.connection_type !=
- ACPI_RESOURCE_GPIO_TYPE_INT)
- continue;
+ ret = gpiochip_request_own_desc(desc, "ACPI:Event");
+ if (ret) {
+ dev_err(chip->dev, "Failed to request GPIO\n");
+ return AE_ERROR;
+ }
- pin = res->data.gpio.pin_table[0];
- if (pin > chip->ngpio)
- continue;
+ gpiod_direction_input(desc);
- irq = chip->to_irq(chip, pin);
- if (irq < 0)
- continue;
+ ret = gpiod_lock_as_irq(desc);
+ if (ret) {
+ dev_err(chip->dev, "Failed to lock GPIO as interrupt\n");
+ goto fail_free_desc;
+ }
- if (pin <= 255) {
- acpi_handle ev_handle;
+ irq = gpiod_to_irq(desc);
+ if (irq < 0) {
+ dev_err(chip->dev, "Failed to translate GPIO to IRQ\n");
+ goto fail_unlock_irq;
+ }
- sprintf(ev_name, "_%c%02X",
- res->data.gpio.triggering ? 'E' : 'L', pin);
- status = acpi_get_handle(handle, ev_name, &ev_handle);
- if (ACPI_SUCCESS(status)) {
- handler = acpi_gpio_irq_handler;
- data = ev_handle;
- }
+ irqflags = IRQF_ONESHOT;
+ if (agpio->triggering == ACPI_LEVEL_SENSITIVE) {
+ if (agpio->polarity == ACPI_ACTIVE_HIGH)
+ irqflags |= IRQF_TRIGGER_HIGH;
+ else
+ irqflags |= IRQF_TRIGGER_LOW;
+ } else {
+ switch (agpio->polarity) {
+ case ACPI_ACTIVE_HIGH:
+ irqflags |= IRQF_TRIGGER_RISING;
+ break;
+ case ACPI_ACTIVE_LOW:
+ irqflags |= IRQF_TRIGGER_FALLING;
+ break;
+ default:
+ irqflags |= IRQF_TRIGGER_RISING |
+ IRQF_TRIGGER_FALLING;
+ break;
}
- if (!handler) {
- struct acpi_gpio_event *event;
-
- status = acpi_get_handle(handle, "_EVT", &evt_handle);
- if (ACPI_FAILURE(status))
- continue
+ }
- event = kzalloc(sizeof(*event), GFP_KERNEL);
- if (!event)
- continue;
+ event = kzalloc(sizeof(*event), GFP_KERNEL);
+ if (!event)
+ goto fail_unlock_irq;
- list_add_tail(&event->node, &acpi_gpio->events);
- event->handle = evt_handle;
- event->pin = pin;
- event->irq = irq;
- handler = acpi_gpio_irq_handler_evt;
- data = event;
- }
- if (!handler)
- continue;
+ event->handle = evt_handle;
+ event->irq = irq;
+ event->pin = pin;
- /* Assume BIOS sets the triggering, so no flags */
- ret = devm_request_threaded_irq(chip->dev, irq, NULL, handler,
- 0, "GPIO-signaled-ACPI-event",
- data);
- if (ret)
- dev_err(chip->dev,
- "Failed to request IRQ %d ACPI event handler\n",
- irq);
+ ret = request_threaded_irq(event->irq, NULL, handler, irqflags,
+ "ACPI:Event", event);
+ if (ret) {
+ dev_err(chip->dev, "Failed to setup interrupt handler for %d\n",
+ event->irq);
+ goto fail_free_event;
}
+
+ list_add_tail(&event->node, &acpi_gpio->events);
+ return AE_OK;
+
+fail_free_event:
+ kfree(event);
+fail_unlock_irq:
+ gpiod_unlock_as_irq(desc);
+fail_free_desc:
+ gpiochip_free_own_desc(desc);
+
+ return AE_ERROR;
}
/**
- * acpi_gpiochip_free_interrupts() - Free GPIO _EVT ACPI event interrupts.
+ * acpi_gpiochip_request_interrupts() - Register isr for gpio chip ACPI events
* @acpi_gpio: ACPI GPIO chip
*
- * Free interrupts associated with the _EVT method for the given GPIO chip.
+ * ACPI5 platforms can use GPIO signaled ACPI events. These GPIO interrupts are
+ * handled by ACPI event methods which need to be called from the GPIO
+ * chip's interrupt handler. acpi_gpiochip_request_interrupts finds out which
+ * gpio pins have acpi event methods and assigns interrupt handlers that calls
+ * the acpi event methods for those pins.
+ */
+static void acpi_gpiochip_request_interrupts(struct acpi_gpio_chip *acpi_gpio)
+{
+ struct gpio_chip *chip = acpi_gpio->chip;
+
+ if (!chip->dev || !chip->to_irq)
+ return;
+
+ INIT_LIST_HEAD(&acpi_gpio->events);
+ acpi_walk_resources(ACPI_HANDLE(chip->dev), "_AEI",
+ acpi_gpiochip_request_interrupt, acpi_gpio);
+}
+
+/**
+ * acpi_gpiochip_free_interrupts() - Free GPIO ACPI event interrupts.
+ * @acpi_gpio: ACPI GPIO chip
*
- * The remaining ACPI event interrupts associated with the chip are freed
- * automatically.
+ * Free interrupts associated with GPIO ACPI event method for the given
+ * GPIO chip.
*/
static void acpi_gpiochip_free_interrupts(struct acpi_gpio_chip *acpi_gpio)
{
@@ -206,7 +243,14 @@ static void acpi_gpiochip_free_interrupts(struct acpi_gpio_chip *acpi_gpio)
return;
list_for_each_entry_safe_reverse(event, ep, &acpi_gpio->events, node) {
- devm_free_irq(chip->dev, event->irq, event);
+ struct gpio_desc *desc;
+
+ free_irq(event->irq, event);
+ desc = gpiochip_get_desc(chip, event->pin);
+ if (WARN_ON(IS_ERR(desc)))
+ continue;
+ gpiod_unlock_as_irq(desc);
+ gpiochip_free_own_desc(desc);
list_del(&event->node);
kfree(event);
}
@@ -1266,11 +1266,12 @@ int gpiochip_remove(struct gpio_chip *chip)
int status = 0;
unsigned id;
+ acpi_gpiochip_remove(chip);
+
spin_lock_irqsave(&gpio_lock, flags);
gpiochip_remove_pin_ranges(chip);
of_gpiochip_remove(chip);
- acpi_gpiochip_remove(chip);
for (id = 0; id < chip->ngpio; id++) {
if (test_bit(FLAG_REQUESTED, &chip->desc[id].flags)) {
The current ACPI GPIO event handling code was never tested against real hardware with functioning GPIO triggered events (at the time such hardware wasn't available). Thus it misses certain things like requesting the GPIOs properly, passing correct flags to the interrupt handler and so on. This patch reworks ACPI GPIO event handling so that we: 1) Use struct acpi_gpio_event for all GPIO signaled events. 2) Switch to use GPIO descriptor API and request GPIOs by calling gpiochip_request_own_desc() that we added in a previous patch. 3) Pass proper flags from ACPI GPIO resource to request_threaded_irq(). Also instead of open-coding the _AEI iteration loop we can use acpi_walk_resources(). This simplifies the code a bit and fixes memory leak that was caused by missing kfree() for buffer returned by acpi_get_event_resources(). Since the remove path now calls gpiochip_free_own_desc() which takes GPIO spinlock we need to call acpi_gpiochip_remove() outside of that lock (analogous to acpi_gpiochip_add() path where the lock is released before those funtions are called). Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com> Reviewed-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com> --- drivers/gpio/gpiolib-acpi.c | 214 ++++++++++++++++++++++++++------------------ drivers/gpio/gpiolib.c | 3 +- 2 files changed, 131 insertions(+), 86 deletions(-)