@@ -74,7 +74,7 @@ obj-$(CONFIG_ACPI_HED) += hed.o
obj-$(CONFIG_ACPI_EC_DEBUGFS) += ec_sys.o
obj-$(CONFIG_ACPI_CUSTOM_METHOD)+= custom_method.o
obj-$(CONFIG_ACPI_BGRT) += bgrt.o
-obj-$(CONFIG_ACPI_PCC) += pcc.o
+obj-$(CONFIG_ACPI_PCC) += pcc.o pcc-test.o
# processor has its own "processor." module_param namespace
processor-y := processor_driver.o processor_throttling.o
processor-y += processor_idle.o processor_thermal.o
new file mode 100644
@@ -0,0 +1,208 @@
+/*
+ * Copyright (C) 2014 Linaro Ltd.
+ * Author: Ashwin Chaugule <ashwin.chaugule@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/acpi.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
+#include <linux/init.h>
+#include <linux/cpufreq.h>
+#include <linux/proc_fs.h>
+#include <linux/seq_file.h>
+#include <linux/mailbox_client.h>
+#include <linux/mailbox_controller.h>
+
+#include <asm/uaccess.h>
+
+#include <acpi/actbl.h>
+
+static void __iomem *comm_base_addr; /* For use after ioremap */
+
+extern int mbox_controller_register(struct mbox_controller *mbox);
+extern struct mbox_chan *mbox_request_channel(struct mbox_client *cl);
+extern int mbox_send_message(struct mbox_chan *chan, void *mssg);
+
+
+/* XXX: The PCC Subspace id is hard coded here only for test purposes.
+ * In reality it should be parsed from the PCC package as described
+ * in the PCC client table. e.g. CPC for CPPC
+ */
+#define PCC_SUBSPACE_IDX 0
+#define CMD_COMPLETE 1
+
+struct mbox_chan *pcc_test_chan;
+enum ppc_cmds {
+ CMD_READ,
+ CMD_WRITE,
+ RESERVED,
+};
+
+static u32 reg1, reg2;
+
+static void run_pcc_test_read(void)
+{
+ u32 reg1_addr = (u32)comm_base_addr + 0x100;
+ u32 reg2_addr = (u32)comm_base_addr + 0x110;
+ char mssg[2];
+ int ret;
+
+ /* READ part of the test */
+ pr_info("Sending PCC read req from Channel base addr: %x\n", (u32)comm_base_addr);
+
+ snprintf(mssg, sizeof(short), "%d", CMD_READ);
+ ret = mbox_send_message(pcc_test_chan, &mssg);
+ if (ret >= 0) {
+ pr_info("Read updated values from Platform.\n");
+ reg1 = ioread32((void*)reg1_addr);
+ reg2 = ioread32((void*)reg2_addr);
+ pr_info("updated value of reg1:%x\n", reg1);
+ pr_info("updated value of reg2:%x\n", reg2);
+ } else
+ pr_err("Failed to read PCC parameters: ret=%d\n", ret);
+}
+
+static void run_pcc_test_write(void)
+{
+ u32 reg1_addr = (u32)comm_base_addr + 0x100;
+ u32 reg2_addr = (u32)comm_base_addr + 0x110;
+ char mssg[2];
+ int ret;
+
+ /* WRITE part of the test */
+ reg1++;
+ reg2++;
+
+ iowrite32(reg1, (void *)reg1_addr);
+ iowrite32(reg2, (void *)reg2_addr);
+
+ pr_info("Sending PCC write req from Channel base addr: %x\n", (u32)comm_base_addr);
+ snprintf(mssg, sizeof(short), "%d", CMD_WRITE);
+
+ ret = mbox_send_message(pcc_test_chan, &mssg);
+
+ if (ret >= 0)
+ pr_info("OSPM successfully sent PCC write cmd to platform\n");
+ else
+ pr_err("Failed to write PCC parameters. ret= %d\n", ret);
+}
+
+static void pcc_chan_tx_done(struct mbox_client *cl, void *mssg, enum mbox_result r)
+{
+ if (r == MBOX_OK)
+ pr_info("PCC channel TX successfully completed. CMD sent = %s\n", (char*)mssg);
+ else
+ pr_warn("PCC channel TX did not complete: CMD sent = %s\n", (char*)mssg);
+}
+
+struct mbox_client pcc_mbox_cl = {
+ .chan_name = "0",
+ .ctrl_name = "PCCT",
+ .tx_done = pcc_chan_tx_done,
+};
+
+void get_pcc_comm(void)
+{
+ u32 base_addr;
+ u32 len;
+ struct acpi_pcct_subspace *pcc_ss;
+
+ pcc_test_chan = mbox_request_channel(&pcc_mbox_cl);
+
+ if (!pcc_test_chan) {
+ pr_err("PCC Channel not found!\n");
+ return;
+ }
+
+ pcc_ss = pcc_test_chan->con_priv;
+
+ base_addr = pcc_ss->base_address;
+ len = pcc_ss->length;
+
+ pr_info("ioremapping: %x, len: %x\n", base_addr, len);
+
+ comm_base_addr = ioremap_nocache(base_addr, len);
+
+ if (!comm_base_addr) {
+ pr_err("Could not ioremap channel\n");
+ return;
+ }
+
+ pcc_ss->base_address = (u32)comm_base_addr;
+
+ pr_info("Comm_base_addr: %x\n", (u32)comm_base_addr);
+}
+
+static ssize_t pcc_test_write(struct file *file, const char __user *buf,
+ size_t count, loff_t *offs)
+{
+ char ctl[2];
+
+ if (count != 2 || *offs)
+ return -EINVAL;
+
+ if (copy_from_user(ctl, buf, count))
+ return -EFAULT;
+
+ switch (ctl[0]) {
+ case '0':
+ /* PCC read */
+ run_pcc_test_read();
+ break;
+ case '1':
+ /* PCC write */
+ run_pcc_test_write();
+ break;
+ case '2':
+ /* Get PCC channel */
+ get_pcc_comm();
+ break;
+ default:
+ pr_err("Unknown val\n");
+ break;
+ }
+
+ return count;
+}
+
+static int pcc_test_open(struct inode *inode, struct file *filp)
+{
+ return 0;
+}
+
+static int pcc_test_release(struct inode *inode, struct file *filp)
+{
+ return 0;
+}
+
+static const struct file_operations pcc_test_fops = {
+ .open = pcc_test_open,
+// .read = seq_read,
+ .write = pcc_test_write,
+ .release = pcc_test_release,
+};
+
+static int __init pcc_test(void)
+{
+ struct proc_dir_entry *pe;
+
+ pe = proc_create("pcc_test", 0644, NULL, &pcc_test_fops);
+
+ if (!pe)
+ return -ENOMEM;
+
+ return 0;
+}
+
+late_initcall(pcc_test);
A simple test driver to register as a PCC mailbox client and send PCC reads/writes via the PCC mailbox controller. echo 2 > /proc/pcc_test to register client. echo 1 > /proc/pcc_test for PCC writes. echo 0 > /proc/pcc_test for PCC reads. Signed-off-by: Ashwin Chaugule <ashwin.chaugule@linaro.org> --- drivers/acpi/Makefile | 2 +- drivers/acpi/pcc-test.c | 208 ++++++++++++++++++++++++++++++++++++++++++++++++ 2 files changed, 209 insertions(+), 1 deletion(-) create mode 100644 drivers/acpi/pcc-test.c