| Message ID | 1420368918-5086-15-git-send-email-hanjun.guo@linaro.org (mailing list archive) |
|---|---|
| State | Superseded, archived |
| Headers | show |
On 1/4/15, 04:55, "Hanjun Guo" <hanjun.guo@linaro.org> wrote: >Using the information presented by GTDT to initialize the arch >timer (not memory-mapped). > >Originally-by: Amit Daniel Kachhap <amit.daniel@samsung.com> >Tested-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> >Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> >--- > arch/arm64/kernel/time.c | 7 ++ > drivers/clocksource/arm_arch_timer.c | 132 >++++++++++++++++++++++++++++------- > include/linux/clocksource.h | 6 ++ > 3 files changed, 118 insertions(+), 27 deletions(-) > >diff --git a/arch/arm64/kernel/time.c b/arch/arm64/kernel/time.c >index 1a7125c..42f9195 100644 >--- a/arch/arm64/kernel/time.c >+++ b/arch/arm64/kernel/time.c >@@ -35,6 +35,7 @@ > #include <linux/delay.h> > #include <linux/clocksource.h> > #include <linux/clk-provider.h> >+#include <linux/acpi.h> > > #include <clocksource/arm_arch_timer.h> > >@@ -72,6 +73,12 @@ void __init time_init(void) > > tick_setup_hrtimer_broadcast(); > >+ /* >+ * Since ACPI or FDT will only one be available in the system, >+ * we can use acpi_generic_timer_init() here safely >+ */ >+ acpi_generic_timer_init(); >+ > arch_timer_rate = arch_timer_get_rate(); > if (!arch_timer_rate) > panic("Unable to initialise architected timer.\n"); >diff --git a/drivers/clocksource/arm_arch_timer.c >b/drivers/clocksource/arm_arch_timer.c >index 6a79fc4..612f2a0 100644 >--- a/drivers/clocksource/arm_arch_timer.c >+++ b/drivers/clocksource/arm_arch_timer.c >@@ -21,6 +21,7 @@ > #include <linux/io.h> > #include <linux/slab.h> > #include <linux/sched_clock.h> >+#include <linux/acpi.h> > > #include <asm/arch_timer.h> > #include <asm/virt.h> >@@ -370,8 +371,12 @@ arch_timer_detect_rate(void __iomem *cntbase, struct >device_node *np) > if (arch_timer_rate) > return; > >- /* Try to determine the frequency from the device tree or CNTFRQ */ >- if (of_property_read_u32(np, "clock-frequency", &arch_timer_rate)) { >+ /* >+ * Try to determine the frequency from the device tree or CNTFRQ, >+ * if ACPI is enabled, get the frequency from CNTFRQ ONLY. >+ */ >+ if (!acpi_disabled || >+ of_property_read_u32(np, "clock-frequency", &arch_timer_rate)) { > if (cntbase) > arch_timer_rate = readl_relaxed(cntbase + CNTFRQ); > else >@@ -690,28 +695,8 @@ static void __init arch_timer_common_init(void) > arch_timer_arch_init(); > } > >-static void __init arch_timer_init(struct device_node *np) >+static void __init arch_timer_init(void) > { >- int i; >- >- if (arch_timers_present & ARCH_CP15_TIMER) { >- pr_warn("arch_timer: multiple nodes in dt, skipping\n"); >- return; >- } >- >- arch_timers_present |= ARCH_CP15_TIMER; >- for (i = PHYS_SECURE_PPI; i < MAX_TIMER_PPI; i++) >- arch_timer_ppi[i] = irq_of_parse_and_map(np, i); >- arch_timer_detect_rate(NULL, np); >- >- /* >- * If we cannot rely on firmware initializing the timer registers then >- * we should use the physical timers instead. >- */ >- if (IS_ENABLED(CONFIG_ARM) && >- of_property_read_bool(np, "arm,cpu-registers-not-fw-configured")) >- arch_timer_use_virtual = false; >- > /* > * If HYP mode is available, we know that the physical timer > * has been configured to be accessible from PL1. Use it, so >@@ -730,13 +715,39 @@ static void __init arch_timer_init(struct >device_node *np) > } > } > >- arch_timer_c3stop = !of_property_read_bool(np, "always-on"); >- > arch_timer_register(); > arch_timer_common_init(); > } >-CLOCKSOURCE_OF_DECLARE(armv7_arch_timer, "arm,armv7-timer", >arch_timer_init); >-CLOCKSOURCE_OF_DECLARE(armv8_arch_timer, "arm,armv8-timer", >arch_timer_init); >+ >+static void __init arch_timer_of_init(struct device_node *np) >+{ >+ int i; >+ >+ if (arch_timers_present & ARCH_CP15_TIMER) { >+ pr_warn("arch_timer: multiple nodes in dt, skipping\n"); >+ return; >+ } >+ >+ arch_timers_present |= ARCH_CP15_TIMER; >+ for (i = PHYS_SECURE_PPI; i < MAX_TIMER_PPI; i++) >+ arch_timer_ppi[i] = irq_of_parse_and_map(np, i); >+ >+ arch_timer_detect_rate(NULL, np); >+ >+ arch_timer_c3stop = !of_property_read_bool(np, "always-on"); >+ >+ /* >+ * If we cannot rely on firmware initializing the timer registers then >+ * we should use the physical timers instead. >+ */ >+ if (IS_ENABLED(CONFIG_ARM) && >+ of_property_read_bool(np, "arm,cpu-registers-not-fw-configured")) >+ arch_timer_use_virtual = false; >+ >+ arch_timer_init(); >+} >+CLOCKSOURCE_OF_DECLARE(armv7_arch_timer, "arm,armv7-timer", >arch_timer_of_init); >+CLOCKSOURCE_OF_DECLARE(armv8_arch_timer, "arm,armv8-timer", >arch_timer_of_init); Hanjun, FYI, it seems that the tree that you have rebased the patch series has an issue determining clocksource in ARM64 introduced by this commit. http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=0 b46b8a718c6e90910a1b1b0fe797be3c167e186 Here is the fix from Catalin that already went upstream: http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drive rs/clocksource/arm_arch_timer.c?id=d6ad36913083d683aad4e02e53580c995f1a6ede Thanks, Suravee -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 2015?01?05? 15:55, Suthikulpanit, Suravee wrote: > On 1/4/15, 04:55, "Hanjun Guo" <hanjun.guo@linaro.org> wrote: > >> Using the information presented by GTDT to initialize the arch >> timer (not memory-mapped). >> >> Originally-by: Amit Daniel Kachhap <amit.daniel@samsung.com> >> Tested-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com> >> Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org> >> --- >> arch/arm64/kernel/time.c | 7 ++ >> drivers/clocksource/arm_arch_timer.c | 132 >> ++++++++++++++++++++++++++++------- >> include/linux/clocksource.h | 6 ++ >> 3 files changed, 118 insertions(+), 27 deletions(-) [...] >> +static void __init arch_timer_of_init(struct device_node *np) >> +{ >> + int i; >> + >> + if (arch_timers_present & ARCH_CP15_TIMER) { >> + pr_warn("arch_timer: multiple nodes in dt, skipping\n"); >> + return; >> + } >> + >> + arch_timers_present |= ARCH_CP15_TIMER; >> + for (i = PHYS_SECURE_PPI; i < MAX_TIMER_PPI; i++) >> + arch_timer_ppi[i] = irq_of_parse_and_map(np, i); >> + >> + arch_timer_detect_rate(NULL, np); >> + >> + arch_timer_c3stop = !of_property_read_bool(np, "always-on"); >> + >> + /* >> + * If we cannot rely on firmware initializing the timer registers then >> + * we should use the physical timers instead. >> + */ >> + if (IS_ENABLED(CONFIG_ARM) && >> + of_property_read_bool(np, "arm,cpu-registers-not-fw-configured")) >> + arch_timer_use_virtual = false; >> + >> + arch_timer_init(); >> +} >> +CLOCKSOURCE_OF_DECLARE(armv7_arch_timer, "arm,armv7-timer", >> arch_timer_of_init); >> +CLOCKSOURCE_OF_DECLARE(armv8_arch_timer, "arm,armv8-timer", >> arch_timer_of_init); > > Hanjun, > > FYI, it seems that the tree that you have rebased the patch series has an > issue determining clocksource in ARM64 introduced by this commit. > > http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/?id=0 > b46b8a718c6e90910a1b1b0fe797be3c167e186 > > Here is the fix from Catalin that already went upstream: > > http://git.kernel.org/cgit/linux/kernel/git/torvalds/linux.git/commit/drive > rs/clocksource/arm_arch_timer.c?id=d6ad36913083d683aad4e02e53580c995f1a6ede This bug fix patch was merged in Dec 30 by Linus, which is the date after 3.19-rc2 released :) Thanks Hanjun -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/arch/arm64/kernel/time.c b/arch/arm64/kernel/time.c index 1a7125c..42f9195 100644 --- a/arch/arm64/kernel/time.c +++ b/arch/arm64/kernel/time.c @@ -35,6 +35,7 @@ #include <linux/delay.h> #include <linux/clocksource.h> #include <linux/clk-provider.h> +#include <linux/acpi.h> #include <clocksource/arm_arch_timer.h> @@ -72,6 +73,12 @@ void __init time_init(void) tick_setup_hrtimer_broadcast(); + /* + * Since ACPI or FDT will only one be available in the system, + * we can use acpi_generic_timer_init() here safely + */ + acpi_generic_timer_init(); + arch_timer_rate = arch_timer_get_rate(); if (!arch_timer_rate) panic("Unable to initialise architected timer.\n"); diff --git a/drivers/clocksource/arm_arch_timer.c b/drivers/clocksource/arm_arch_timer.c index 6a79fc4..612f2a0 100644 --- a/drivers/clocksource/arm_arch_timer.c +++ b/drivers/clocksource/arm_arch_timer.c @@ -21,6 +21,7 @@ #include <linux/io.h> #include <linux/slab.h> #include <linux/sched_clock.h> +#include <linux/acpi.h> #include <asm/arch_timer.h> #include <asm/virt.h> @@ -370,8 +371,12 @@ arch_timer_detect_rate(void __iomem *cntbase, struct device_node *np) if (arch_timer_rate) return; - /* Try to determine the frequency from the device tree or CNTFRQ */ - if (of_property_read_u32(np, "clock-frequency", &arch_timer_rate)) { + /* + * Try to determine the frequency from the device tree or CNTFRQ, + * if ACPI is enabled, get the frequency from CNTFRQ ONLY. + */ + if (!acpi_disabled || + of_property_read_u32(np, "clock-frequency", &arch_timer_rate)) { if (cntbase) arch_timer_rate = readl_relaxed(cntbase + CNTFRQ); else @@ -690,28 +695,8 @@ static void __init arch_timer_common_init(void) arch_timer_arch_init(); } -static void __init arch_timer_init(struct device_node *np) +static void __init arch_timer_init(void) { - int i; - - if (arch_timers_present & ARCH_CP15_TIMER) { - pr_warn("arch_timer: multiple nodes in dt, skipping\n"); - return; - } - - arch_timers_present |= ARCH_CP15_TIMER; - for (i = PHYS_SECURE_PPI; i < MAX_TIMER_PPI; i++) - arch_timer_ppi[i] = irq_of_parse_and_map(np, i); - arch_timer_detect_rate(NULL, np); - - /* - * If we cannot rely on firmware initializing the timer registers then - * we should use the physical timers instead. - */ - if (IS_ENABLED(CONFIG_ARM) && - of_property_read_bool(np, "arm,cpu-registers-not-fw-configured")) - arch_timer_use_virtual = false; - /* * If HYP mode is available, we know that the physical timer * has been configured to be accessible from PL1. Use it, so @@ -730,13 +715,39 @@ static void __init arch_timer_init(struct device_node *np) } } - arch_timer_c3stop = !of_property_read_bool(np, "always-on"); - arch_timer_register(); arch_timer_common_init(); } -CLOCKSOURCE_OF_DECLARE(armv7_arch_timer, "arm,armv7-timer", arch_timer_init); -CLOCKSOURCE_OF_DECLARE(armv8_arch_timer, "arm,armv8-timer", arch_timer_init); + +static void __init arch_timer_of_init(struct device_node *np) +{ + int i; + + if (arch_timers_present & ARCH_CP15_TIMER) { + pr_warn("arch_timer: multiple nodes in dt, skipping\n"); + return; + } + + arch_timers_present |= ARCH_CP15_TIMER; + for (i = PHYS_SECURE_PPI; i < MAX_TIMER_PPI; i++) + arch_timer_ppi[i] = irq_of_parse_and_map(np, i); + + arch_timer_detect_rate(NULL, np); + + arch_timer_c3stop = !of_property_read_bool(np, "always-on"); + + /* + * If we cannot rely on firmware initializing the timer registers then + * we should use the physical timers instead. + */ + if (IS_ENABLED(CONFIG_ARM) && + of_property_read_bool(np, "arm,cpu-registers-not-fw-configured")) + arch_timer_use_virtual = false; + + arch_timer_init(); +} +CLOCKSOURCE_OF_DECLARE(armv7_arch_timer, "arm,armv7-timer", arch_timer_of_init); +CLOCKSOURCE_OF_DECLARE(armv8_arch_timer, "arm,armv8-timer", arch_timer_of_init); static void __init arch_timer_mem_init(struct device_node *np) { @@ -803,3 +814,70 @@ static void __init arch_timer_mem_init(struct device_node *np) } CLOCKSOURCE_OF_DECLARE(armv7_arch_timer_mem, "arm,armv7-timer-mem", arch_timer_mem_init); + +#ifdef CONFIG_ACPI +static int __init map_generic_timer_interrupt(u32 interrupt, u32 flags) +{ + int trigger, polarity; + + if (!interrupt) + return 0; + + trigger = (flags & ACPI_GTDT_INTERRUPT_MODE) ? ACPI_EDGE_SENSITIVE + : ACPI_LEVEL_SENSITIVE; + + polarity = (flags & ACPI_GTDT_INTERRUPT_POLARITY) ? ACPI_ACTIVE_LOW + : ACPI_ACTIVE_HIGH; + + return acpi_register_gsi(NULL, interrupt, trigger, polarity); +} + +/* Initialize per-processor generic timer */ +static int __init arch_timer_acpi_init(struct acpi_table_header *table) +{ + struct acpi_table_gtdt *gtdt; + + if (arch_timers_present & ARCH_CP15_TIMER) { + pr_warn("arch_timer: already initialized, skipping\n"); + return -EINVAL; + } + + gtdt = container_of(table, struct acpi_table_gtdt, header); + + arch_timers_present |= ARCH_CP15_TIMER; + + arch_timer_ppi[PHYS_SECURE_PPI] = + map_generic_timer_interrupt(gtdt->secure_el1_interrupt, + gtdt->secure_el1_flags); + + arch_timer_ppi[PHYS_NONSECURE_PPI] = + map_generic_timer_interrupt(gtdt->non_secure_el1_interrupt, + gtdt->non_secure_el1_flags); + + arch_timer_ppi[VIRT_PPI] = + map_generic_timer_interrupt(gtdt->virtual_timer_interrupt, + gtdt->virtual_timer_flags); + + arch_timer_ppi[HYP_PPI] = + map_generic_timer_interrupt(gtdt->non_secure_el2_interrupt, + gtdt->non_secure_el2_flags); + + /* Get the frequency from CNTFRQ */ + arch_timer_detect_rate(NULL, NULL); + + /* Always-on capability */ + arch_timer_c3stop = !(gtdt->non_secure_el1_flags & ACPI_GTDT_ALWAYS_ON); + + arch_timer_init(); + return 0; +} + +/* Initialize all the generic timers presented in GTDT */ +void __init acpi_generic_timer_init(void) +{ + if (acpi_disabled) + return; + + acpi_table_parse(ACPI_SIG_GTDT, arch_timer_acpi_init); +} +#endif diff --git a/include/linux/clocksource.h b/include/linux/clocksource.h index abcafaa..af6155a 100644 --- a/include/linux/clocksource.h +++ b/include/linux/clocksource.h @@ -346,4 +346,10 @@ extern void clocksource_of_init(void); static inline void clocksource_of_init(void) {} #endif +#ifdef CONFIG_ACPI +void acpi_generic_timer_init(void); +#else +static inline void acpi_generic_timer_init(void) { } +#endif + #endif /* _LINUX_CLOCKSOURCE_H */