Message ID | 1432852553-24865-5-git-send-email-ross.zwisler@linux.intel.com (mailing list archive) |
---|---|
State | Not Applicable, archived |
Headers | show |
On Thu, May 28, 2015 at 3:35 PM, Ross Zwisler <ross.zwisler@linux.intel.com> wrote: > Update the PMEM and ND_BLK I/O paths to use the new PMEM API and to > adhere to the read/write flows outlined in the "NVDIMM Block Window > Driver Writer's Guide": > > http://pmem.io/documents/NVDIMM_Driver_Writers_Guide.pdf > > Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> > Cc: Dan Williams <dan.j.williams@intel.com> > Cc: linux-nvdimm@lists.01.org > Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> > Cc: linux-acpi@vger.kernel.org > --- > drivers/acpi/nfit.c | 10 ++++++++-- > drivers/block/nd/pmem.c | 15 +++++++++++---- > 2 files changed, 19 insertions(+), 6 deletions(-) > > diff --git a/drivers/acpi/nfit.c b/drivers/acpi/nfit.c > index df14652ea13e..22df61968c1c 100644 > --- a/drivers/acpi/nfit.c > +++ b/drivers/acpi/nfit.c > @@ -18,6 +18,7 @@ > #include <linux/list.h> > #include <linux/acpi.h> > #include <linux/sort.h> > +#include <linux/pmem.h> > #include <linux/io.h> > #include "nfit.h" > > @@ -926,7 +927,9 @@ static void write_blk_ctl(struct nfit_blk *nfit_blk, unsigned int bw, > if (mmio->num_lines) > offset = to_interleave_offset(offset, mmio); > > + /* mmio->base must be mapped uncacheable */ > writeq(cmd, mmio->base + offset); > + persistent_sync(); > /* FIXME: conditionally perform read-back if mandated by firmware */ > } > > @@ -940,7 +943,6 @@ static int acpi_nfit_blk_single_io(struct nfit_blk *nfit_blk, void *iobuf, > int rc; > > base_offset = nfit_blk->bdw_offset + dpa % L1_CACHE_BYTES + bw * mmio->size; > - /* TODO: non-temporal access, flush hints, cache management etc... */ > write_blk_ctl(nfit_blk, bw, dpa, len, write); > while (len) { > unsigned int c; > @@ -959,13 +961,17 @@ static int acpi_nfit_blk_single_io(struct nfit_blk *nfit_blk, void *iobuf, > } > > if (write) > - memcpy(mmio->aperture + offset, iobuf + copied, c); > + persistent_copy(mmio->aperture + offset, iobuf + copied, c); > else > memcpy(iobuf + copied, mmio->aperture + offset, c); > > copied += c; > len -= c; > } > + > + if (write) > + persistent_sync(); > + > rc = read_blk_stat(nfit_blk, bw) ? -EIO : 0; > return rc; > } > diff --git a/drivers/block/nd/pmem.c b/drivers/block/nd/pmem.c > index a8712e41e7f5..1a447c351aef 100644 > --- a/drivers/block/nd/pmem.c > +++ b/drivers/block/nd/pmem.c > @@ -15,15 +15,16 @@ > * more details. > */ > > -#include <asm/cacheflush.h> > #include <linux/blkdev.h> > #include <linux/hdreg.h> > #include <linux/init.h> > #include <linux/platform_device.h> > #include <linux/module.h> > #include <linux/moduleparam.h> > +#include <linux/pmem.h> > #include <linux/slab.h> > #include <linux/nd.h> > +#include <asm/cacheflush.h> > #include "nd.h" > > struct pmem_device { > @@ -51,7 +52,7 @@ static void pmem_do_bvec(struct pmem_device *pmem, struct page *page, > flush_dcache_page(page); > } else { > flush_dcache_page(page); > - memcpy(pmem->virt_addr + pmem_off, mem + off, len); > + persistent_copy(pmem->virt_addr + pmem_off, mem + off, len); > } > > kunmap_atomic(mem); > @@ -82,6 +83,8 @@ static void pmem_make_request(struct request_queue *q, struct bio *bio) > sector += bvec.bv_len >> 9; > } > > + if (rw & WRITE) > + persistent_sync(); > out: > bio_endio(bio, err); > } > @@ -92,6 +95,8 @@ static int pmem_rw_page(struct block_device *bdev, sector_t sector, > struct pmem_device *pmem = bdev->bd_disk->private_data; > > pmem_do_bvec(pmem, page, PAGE_CACHE_SIZE, 0, rw, sector); > + if (rw & WRITE) > + persistent_sync(); > page_endio(page, rw & WRITE, 0); > > return 0; > @@ -111,8 +116,10 @@ static int pmem_rw_bytes(struct nd_io *ndio, void *buf, size_t offset, > > if (rw == READ) > memcpy(buf, pmem->virt_addr + offset, n); > - else > - memcpy(pmem->virt_addr + offset, buf, n); > + else { > + persistent_copy(pmem->virt_addr + offset, buf, n); > + persistent_sync(); > + } > It bothers me that persistent_sync() is a lie for almost every system on the planet. Even though uncached mappings are not sufficient for guaranteeing persistence the potential damage is minimized. To me it seems the driver should have separate I/O paths for the persistent and non-persistent case determined and notified at init time. I.e. arrange to never call persistent_sync() when it is known to be a nop and tell the user "btw, your data is at risk". -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/acpi/nfit.c b/drivers/acpi/nfit.c index df14652ea13e..22df61968c1c 100644 --- a/drivers/acpi/nfit.c +++ b/drivers/acpi/nfit.c @@ -18,6 +18,7 @@ #include <linux/list.h> #include <linux/acpi.h> #include <linux/sort.h> +#include <linux/pmem.h> #include <linux/io.h> #include "nfit.h" @@ -926,7 +927,9 @@ static void write_blk_ctl(struct nfit_blk *nfit_blk, unsigned int bw, if (mmio->num_lines) offset = to_interleave_offset(offset, mmio); + /* mmio->base must be mapped uncacheable */ writeq(cmd, mmio->base + offset); + persistent_sync(); /* FIXME: conditionally perform read-back if mandated by firmware */ } @@ -940,7 +943,6 @@ static int acpi_nfit_blk_single_io(struct nfit_blk *nfit_blk, void *iobuf, int rc; base_offset = nfit_blk->bdw_offset + dpa % L1_CACHE_BYTES + bw * mmio->size; - /* TODO: non-temporal access, flush hints, cache management etc... */ write_blk_ctl(nfit_blk, bw, dpa, len, write); while (len) { unsigned int c; @@ -959,13 +961,17 @@ static int acpi_nfit_blk_single_io(struct nfit_blk *nfit_blk, void *iobuf, } if (write) - memcpy(mmio->aperture + offset, iobuf + copied, c); + persistent_copy(mmio->aperture + offset, iobuf + copied, c); else memcpy(iobuf + copied, mmio->aperture + offset, c); copied += c; len -= c; } + + if (write) + persistent_sync(); + rc = read_blk_stat(nfit_blk, bw) ? -EIO : 0; return rc; } diff --git a/drivers/block/nd/pmem.c b/drivers/block/nd/pmem.c index a8712e41e7f5..1a447c351aef 100644 --- a/drivers/block/nd/pmem.c +++ b/drivers/block/nd/pmem.c @@ -15,15 +15,16 @@ * more details. */ -#include <asm/cacheflush.h> #include <linux/blkdev.h> #include <linux/hdreg.h> #include <linux/init.h> #include <linux/platform_device.h> #include <linux/module.h> #include <linux/moduleparam.h> +#include <linux/pmem.h> #include <linux/slab.h> #include <linux/nd.h> +#include <asm/cacheflush.h> #include "nd.h" struct pmem_device { @@ -51,7 +52,7 @@ static void pmem_do_bvec(struct pmem_device *pmem, struct page *page, flush_dcache_page(page); } else { flush_dcache_page(page); - memcpy(pmem->virt_addr + pmem_off, mem + off, len); + persistent_copy(pmem->virt_addr + pmem_off, mem + off, len); } kunmap_atomic(mem); @@ -82,6 +83,8 @@ static void pmem_make_request(struct request_queue *q, struct bio *bio) sector += bvec.bv_len >> 9; } + if (rw & WRITE) + persistent_sync(); out: bio_endio(bio, err); } @@ -92,6 +95,8 @@ static int pmem_rw_page(struct block_device *bdev, sector_t sector, struct pmem_device *pmem = bdev->bd_disk->private_data; pmem_do_bvec(pmem, page, PAGE_CACHE_SIZE, 0, rw, sector); + if (rw & WRITE) + persistent_sync(); page_endio(page, rw & WRITE, 0); return 0; @@ -111,8 +116,10 @@ static int pmem_rw_bytes(struct nd_io *ndio, void *buf, size_t offset, if (rw == READ) memcpy(buf, pmem->virt_addr + offset, n); - else - memcpy(pmem->virt_addr + offset, buf, n); + else { + persistent_copy(pmem->virt_addr + offset, buf, n); + persistent_sync(); + } return 0; }
Update the PMEM and ND_BLK I/O paths to use the new PMEM API and to adhere to the read/write flows outlined in the "NVDIMM Block Window Driver Writer's Guide": http://pmem.io/documents/NVDIMM_Driver_Writers_Guide.pdf Signed-off-by: Ross Zwisler <ross.zwisler@linux.intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: linux-nvdimm@lists.01.org Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: linux-acpi@vger.kernel.org --- drivers/acpi/nfit.c | 10 ++++++++-- drivers/block/nd/pmem.c | 15 +++++++++++---- 2 files changed, 19 insertions(+), 6 deletions(-)