| Message ID | 1464693584-22343-8-git-send-email-tn@semihalf.com (mailing list archive) |
|---|---|
| State | Not Applicable, archived |
| Headers | show |
On Tue, 31 May 2016 13:19:44 +0200 Tomasz Nowicki <tn@semihalf.com> wrote: > Let ACPI build ITS PCI MSI domain. ACPI is responsible for retrieving > inner domain token and passing it on to its_pci_msi_init_one generic > init call. > > We have now full PCI MSI domain stack, thus we can enable ITS initialization > from GICv3 core driver for ACPI scenario. > > Signed-off-by: Tomasz Nowicki <tn@semihalf.com> > --- > drivers/irqchip/irq-gic-v3-its-pci-msi.c | 42 +++++++++++++++++++++++++++++++- > drivers/irqchip/irq-gic-v3.c | 3 +-- > 2 files changed, 42 insertions(+), 3 deletions(-) > > diff --git a/drivers/irqchip/irq-gic-v3-its-pci-msi.c b/drivers/irqchip/irq-gic-v3-its-pci-msi.c > index 23679ae..985f5d9 100644 > --- a/drivers/irqchip/irq-gic-v3-its-pci-msi.c > +++ b/drivers/irqchip/irq-gic-v3-its-pci-msi.c > @@ -15,6 +15,7 @@ > * along with this program. If not, see <http://www.gnu.org/licenses/>. > */ > > +#include <linux/iort.h> > #include <linux/msi.h> > #include <linux/of.h> > #include <linux/of_irq.h> > @@ -144,10 +145,49 @@ static int __init its_pci_of_msi_init(void) > return 0; > } > > +#ifdef CONFIG_ACPI > + > +static int __init > +its_pci_msi_parse_madt(struct acpi_subtable_header *header, > + const unsigned long end) > +{ > + struct acpi_madt_generic_translator *its_entry; > + struct fwnode_handle *dom_handle; > + char node_name[6 + 16 + 1]; // ITS identification name Jeezus... Where is that coming from? Is that the size of "ITS@0x"+16 hex digits and a final NUL? For the sake of keeping things maintainable/readable, please use kasprintf/kfree. > + > + its_entry = (struct acpi_madt_generic_translator *)header; > + snprintf(node_name, 23, "ITS@0x%lx", (long)its_entry->base_address); > + dom_handle = iort_its_find_domain_token(its_entry->translation_id); > + if (!dom_handle) { > + pr_err("%s: Unable to locate ITS domain handle\n", node_name); > + return 0; return 0? not even a slap on the wrist? Hum... > + } > + > + if (its_pci_msi_init_one(dom_handle, node_name)) > + return 0; Same here. > + > + pr_info("PCI/MSI: %s domain created\n", node_name); > + return 0; > +} > + > +static int __init its_pci_acpi_msi_init(void) > +{ > + acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_TRANSLATOR, > + its_pci_msi_parse_madt, 0); > + return 0; > +} > +#else > +inline static int __init its_pci_acpi_msi_init(void) static only. > +{ > + return 0; > +} > +#endif > + > static int __init its_pci_msi_init(void) > { > its_pci_of_msi_init(); > + its_pci_acpi_msi_init(); > + > return 0; > } > - > early_initcall(its_pci_msi_init); > diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c > index cee8296..41c1cda 100644 > --- a/drivers/irqchip/irq-gic-v3.c > +++ b/drivers/irqchip/irq-gic-v3.c > @@ -951,8 +951,7 @@ static int __init gic_init_bases(void __iomem *dist_base, > > set_handle_irq(gic_handle_irq); > > - if (IS_ENABLED(CONFIG_ARM_GIC_V3_ITS) && gic_dist_supports_lpis() && > - to_of_node(handle)) /* Temp hack to prevent ITS init for ACPI */ > + if (IS_ENABLED(CONFIG_ARM_GIC_V3_ITS) && gic_dist_supports_lpis()) > its_init(handle, &gic_data.rdists, gic_data.domain); > > gic_smp_init(); Thanks, M.
On 04.06.2016 14:07, Marc Zyngier wrote: > On Tue, 31 May 2016 13:19:44 +0200 > Tomasz Nowicki <tn@semihalf.com> wrote: > >> Let ACPI build ITS PCI MSI domain. ACPI is responsible for retrieving >> inner domain token and passing it on to its_pci_msi_init_one generic >> init call. >> >> We have now full PCI MSI domain stack, thus we can enable ITS initialization >> from GICv3 core driver for ACPI scenario. >> >> Signed-off-by: Tomasz Nowicki <tn@semihalf.com> >> --- >> drivers/irqchip/irq-gic-v3-its-pci-msi.c | 42 +++++++++++++++++++++++++++++++- >> drivers/irqchip/irq-gic-v3.c | 3 +-- >> 2 files changed, 42 insertions(+), 3 deletions(-) >> >> diff --git a/drivers/irqchip/irq-gic-v3-its-pci-msi.c b/drivers/irqchip/irq-gic-v3-its-pci-msi.c >> index 23679ae..985f5d9 100644 >> --- a/drivers/irqchip/irq-gic-v3-its-pci-msi.c >> +++ b/drivers/irqchip/irq-gic-v3-its-pci-msi.c >> @@ -15,6 +15,7 @@ >> * along with this program. If not, see <http://www.gnu.org/licenses/>. >> */ >> >> +#include <linux/iort.h> >> #include <linux/msi.h> >> #include <linux/of.h> >> #include <linux/of_irq.h> >> @@ -144,10 +145,49 @@ static int __init its_pci_of_msi_init(void) >> return 0; >> } >> >> +#ifdef CONFIG_ACPI >> + >> +static int __init >> +its_pci_msi_parse_madt(struct acpi_subtable_header *header, >> + const unsigned long end) >> +{ >> + struct acpi_madt_generic_translator *its_entry; >> + struct fwnode_handle *dom_handle; >> + char node_name[6 + 16 + 1]; // ITS identification name > > Jeezus... Where is that coming from? Is that the size of "ITS@0x"+16 > hex digits and a final NUL? For the sake of keeping things > maintainable/readable, please use kasprintf/kfree. kasprintf/kfree will be used here. > >> + >> + its_entry = (struct acpi_madt_generic_translator *)header; >> + snprintf(node_name, 23, "ITS@0x%lx", (long)its_entry->base_address); >> + dom_handle = iort_its_find_domain_token(its_entry->translation_id); >> + if (!dom_handle) { >> + pr_err("%s: Unable to locate ITS domain handle\n", node_name); >> + return 0; > > return 0? not even a slap on the wrist? Hum... > >> + } >> + >> + if (its_pci_msi_init_one(dom_handle, node_name)) >> + return 0; > > Same here. Yeah, decent error code are needed here. > >> + >> + pr_info("PCI/MSI: %s domain created\n", node_name); >> + return 0; >> +} >> + >> +static int __init its_pci_acpi_msi_init(void) >> +{ >> + acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_TRANSLATOR, >> + its_pci_msi_parse_madt, 0); >> + return 0; >> +} >> +#else >> +inline static int __init its_pci_acpi_msi_init(void) > > static only. OK > >> +{ >> + return 0; >> +} >> +#endif >> + >> static int __init its_pci_msi_init(void) >> { >> its_pci_of_msi_init(); >> + its_pci_acpi_msi_init(); >> + >> return 0; >> } >> - >> early_initcall(its_pci_msi_init); >> diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c >> index cee8296..41c1cda 100644 >> --- a/drivers/irqchip/irq-gic-v3.c >> +++ b/drivers/irqchip/irq-gic-v3.c >> @@ -951,8 +951,7 @@ static int __init gic_init_bases(void __iomem *dist_base, >> >> set_handle_irq(gic_handle_irq); >> >> - if (IS_ENABLED(CONFIG_ARM_GIC_V3_ITS) && gic_dist_supports_lpis() && >> - to_of_node(handle)) /* Temp hack to prevent ITS init for ACPI */ >> + if (IS_ENABLED(CONFIG_ARM_GIC_V3_ITS) && gic_dist_supports_lpis()) >> its_init(handle, &gic_data.rdists, gic_data.domain); >> >> gic_smp_init(); > Thanks for review. Tomasz -- To unsubscribe from this list: send the line "unsubscribe linux-acpi" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/drivers/irqchip/irq-gic-v3-its-pci-msi.c b/drivers/irqchip/irq-gic-v3-its-pci-msi.c index 23679ae..985f5d9 100644 --- a/drivers/irqchip/irq-gic-v3-its-pci-msi.c +++ b/drivers/irqchip/irq-gic-v3-its-pci-msi.c @@ -15,6 +15,7 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ +#include <linux/iort.h> #include <linux/msi.h> #include <linux/of.h> #include <linux/of_irq.h> @@ -144,10 +145,49 @@ static int __init its_pci_of_msi_init(void) return 0; } +#ifdef CONFIG_ACPI + +static int __init +its_pci_msi_parse_madt(struct acpi_subtable_header *header, + const unsigned long end) +{ + struct acpi_madt_generic_translator *its_entry; + struct fwnode_handle *dom_handle; + char node_name[6 + 16 + 1]; // ITS identification name + + its_entry = (struct acpi_madt_generic_translator *)header; + snprintf(node_name, 23, "ITS@0x%lx", (long)its_entry->base_address); + dom_handle = iort_its_find_domain_token(its_entry->translation_id); + if (!dom_handle) { + pr_err("%s: Unable to locate ITS domain handle\n", node_name); + return 0; + } + + if (its_pci_msi_init_one(dom_handle, node_name)) + return 0; + + pr_info("PCI/MSI: %s domain created\n", node_name); + return 0; +} + +static int __init its_pci_acpi_msi_init(void) +{ + acpi_table_parse_madt(ACPI_MADT_TYPE_GENERIC_TRANSLATOR, + its_pci_msi_parse_madt, 0); + return 0; +} +#else +inline static int __init its_pci_acpi_msi_init(void) +{ + return 0; +} +#endif + static int __init its_pci_msi_init(void) { its_pci_of_msi_init(); + its_pci_acpi_msi_init(); + return 0; } - early_initcall(its_pci_msi_init); diff --git a/drivers/irqchip/irq-gic-v3.c b/drivers/irqchip/irq-gic-v3.c index cee8296..41c1cda 100644 --- a/drivers/irqchip/irq-gic-v3.c +++ b/drivers/irqchip/irq-gic-v3.c @@ -951,8 +951,7 @@ static int __init gic_init_bases(void __iomem *dist_base, set_handle_irq(gic_handle_irq); - if (IS_ENABLED(CONFIG_ARM_GIC_V3_ITS) && gic_dist_supports_lpis() && - to_of_node(handle)) /* Temp hack to prevent ITS init for ACPI */ + if (IS_ENABLED(CONFIG_ARM_GIC_V3_ITS) && gic_dist_supports_lpis()) its_init(handle, &gic_data.rdists, gic_data.domain); gic_smp_init();
Let ACPI build ITS PCI MSI domain. ACPI is responsible for retrieving inner domain token and passing it on to its_pci_msi_init_one generic init call. We have now full PCI MSI domain stack, thus we can enable ITS initialization from GICv3 core driver for ACPI scenario. Signed-off-by: Tomasz Nowicki <tn@semihalf.com> --- drivers/irqchip/irq-gic-v3-its-pci-msi.c | 42 +++++++++++++++++++++++++++++++- drivers/irqchip/irq-gic-v3.c | 3 +-- 2 files changed, 42 insertions(+), 3 deletions(-)